Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
emerge SDDM after wiki please HELP
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page Previous  1, 2, 3, 4, 5  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Tue May 14, 2024 9:41 pm    Post subject: Reply with quote

next 100
[ 0.423800] efifb: framebuffer at 0xe0000000, using 1876k, total 1875k
[ 0.423810] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.423818] efifb: scrolling: redraw
[ 0.423823] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.424125] Console: switching to colour frame buffer device 100x37
[ 0.424472] fb0: EFI VGA frame buffer device
[ 0.424497] hid: raw HID events driver (C) Jiri Kosina
[ 0.424525] usbcore: registered new interface driver usbhid
[ 0.424534] usbhid: USB HID core driver
[ 0.424671] drop_monitor: Initializing network drop monitor service
[ 0.424745] Initializing XFRM netlink socket
[ 0.424764] NET: Registered PF_INET6 protocol family
[ 0.434119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.434170] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.434184] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.434195] usb usb3: Product: EHCI Host Controller
[ 0.434203] usb usb3: Manufacturer: Linux 6.6.30-gentoo-dist ehci_hcd
[ 0.434422] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.434738] hub 3-0:1.0: USB hub found
[ 0.434955] hub 3-0:1.0: 3 ports detected
[ 0.435341] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.435588] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 0.435813] ehci-pci 0000:00:1a.0: debug port 2
[ 0.439969] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[ 0.450782] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.451049] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 0.451264] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.451472] usb usb4: Product: EHCI Host Controller
[ 0.451675] usb usb4: Manufacturer: Linux 6.6.30-gentoo-dist ehci_hcd
[ 0.451877] usb usb4: SerialNumber: 0000:00:1a.0
[ 0.452182] hub 4-0:1.0: USB hub found
[ 0.452389] hub 4-0:1.0: 3 ports detected
[ 0.664117] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 0.684115] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.700797] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.724057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.724281] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.725876] ata1.00: ATA-8: WDC WD5000AAKX-60U6AA0, 18.01H18, max UDMA/100
[ 0.726162] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.727799] ata3.00: ATAPI: hp DVD-RAM UJ8E1, 4H01, max UDMA/100
[ 0.728127] ata1.00: configured for UDMA/100
[ 0.728414] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-6 1H18 PQ: 0 ANSI: 5
[ 0.728827] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.729067] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 0.729291] sd 0:0:0:0: [sda] Write Protect is off
[ 0.729493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.729505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.729920] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.733521] ata3.00: configured for UDMA/100
[ 0.738043] scsi 2:0:0:0: CD-ROM hp DVD-RAM UJ8E1 4H01 PQ: 0 ANSI: 5
[ 0.771957] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.772187] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.785981] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.786061] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 0.787311] Freeing initrd memory: 29064K
[ 0.790787] Segment Routing with IPv6
[ 0.791010] RPL Segment Routing with IPv6
[ 0.791236] In-situ OAM (IOAM) with IPv6
[ 0.791469] mip6: Mobile IPv6
[ 0.791684] NET: Registered PF_PACKET protocol family
[ 0.792113] microcode: Microcode Update Driver: v2.2.
[ 0.792118] IPI shorthand broadcast: enabled
[ 0.794185] sched_clock: Marking stable (793334777, 757679)->(799901530, -5809074)
[ 0.794492] registered taskstats version 1
[ 0.794793] Loading compiled-in X.509 certificates
[ 0.795681] Loaded X.509 cert 'Gentoo Linux: Distribution Kernel Signing Key: c3aaa779efbdcf321e7d5b89033ee251722fd93b'
[ 0.797578] sda: sda1 sda2 sda3
[ 0.797934] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.798401] page_owner is disabled
[ 0.798775] Key type .fscrypt registered
[ 0.799000] Key type fscrypt-provisioning registered
[ 0.799599] Btrfs loaded, zoned=yes, fsverity=yes
[ 0.799855] Key type big_key registered
[ 0.800080] Key type trusted registered
[ 0.801990] Key type encrypted registered
[ 0.802529] integrity: Loading X.509 certificate: UEFI:db
[ 0.802771] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.803200] integrity: Loading X.509 certificate: UEFI:db
[ 0.803429] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.803862] integrity: Loading X.509 certificate: UEFI:db
[ 0.804100] integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529'
[ 0.804701] Loading compiled-in module X.509 certificates
[ 0.805448] Loaded X.509 cert 'Gentoo Linux: Distribution Kernel Signing Key: c3aaa779efbdcf321e7d5b89033ee251722fd93b'
[ 0.805886] ima: Allocated hash algorithm: sha256
[ 0.811946] usb 1-1: New USB device found, idVendor=1a86, idProduct=7584, bcdDevice= 2.54
[ 0.812192] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 0.812411] usb 1-1: Product: USB2.0-Print
[ 0.834463] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[ 0.834697] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.835139] hub 3-1:1.0: USB hub found
[ 0.835485] hub 3-1:1.0: 8 ports detected
[ 0.845064] ima: No architecture policies found
[ 0.845307] evm: Initialising EVM extended attributes:
[ 0.845535] evm: security.selinux
[ 0.845757] evm: security.SMACK64 (disabled)
[ 0.845975] evm: security.SMACK64EXEC (disabled)
[ 0.846189] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.846400] evm: security.SMACK64MMAP (disabled)
[ 0.846602] evm: security.apparmor
[ 0.846804] evm: security.ima
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Tue May 14, 2024 9:42 pm    Post subject: Reply with quote

next 100

0.847001] evm: security.capability
[ 0.847197] evm: HMAC attrs: 0x1
[ 0.847604] PM: Magic number: 8:545:348
[ 0.847839] usb 4-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[ 0.848052] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.848137] hid_bpf: error while preloading HID BPF dispatcher: -22
[ 0.848263] RAS: Correctable Errors collector initialized.
[ 0.848505] hub 4-1:1.0: USB hub found
[ 0.848731] clk: Disabling unused clocks
[ 0.849084] hub 4-1:1.0: 6 ports detected
[ 0.850618] Freeing unused decrypted memory: 2028K
[ 0.851365] Freeing unused kernel image (initmem) memory: 4588K
[ 0.851630] Write protecting the kernel read-only data: 30720k
[ 0.852189] Freeing unused kernel image (rodata/data gap) memory: 1108K
[ 0.899506] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.899697] x86/mm: Checking user space page tables
[ 0.934120] usb 1-11: new high-speed USB device number 3 using xhci_hcd
[ 0.941404] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.941592] Run /init as init process
[ 0.941772] with arguments:
[ 0.941773] /init
[ 0.941774] with environment:
[ 0.941775] HOME=/
[ 0.941775] TERM=linux
[ 0.941776] BOOT_IMAGE=/boot/vmlinuz-6.6.30-gentoo-dist
[ 0.984937] dracut: Gentoo-2.15
[ 1.084297] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 1.084492] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.084674] usb 1-11: Product: USB 2.0 Hub
[ 1.085547] hub 1-11:1.0: USB hub found
[ 1.085785] hub 1-11:1.0: 4 ports detected
[ 1.360767] tsc: Refined TSC clocksource calibration: 2993.069 MHz
[ 1.360956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b24b1963f3, max_idle_ns: 440795227598 ns
[ 1.361336] clocksource: Switched to clocksource tsc
[ 1.467503] usb 1-11.1: new low-speed USB device number 4 using xhci_hcd
[ 1.605331] EXT4-fs (sda3): mounted filesystem 1648b2af-5330-4afc-b0a3-5d5edde83507 ro with ordered data mode. Quota mode: none.
[ 1.662934] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 1.663232] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.663513] usb 1-11.1: Product: Usb Mouse
[ 1.663793] usb 1-11.1: Manufacturer: SIGMACHIP
[ 1.669259] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.0001/input/input8
[ 1.670204] hid-generic 0003:1C4F:0048.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 1.690073] EXT4-fs (sda3): unmounting filesystem 1648b2af-5330-4afc-b0a3-5d5edde83507.
[ 1.696705] dracut: Checking ext4: /dev/sda3
[ 1.697068] dracut: issuing e2fsck -a /dev/sda3
[ 1.773645] dracut: /dev/sda3: clean, 516294/30400512 files, 6650342/121572096 blocks
[ 1.776497] dracut: Mounting /dev/disk/by-uuid/1648b2af-5330-4afc-b0a3-5d5edde83507 with -o noatime,ro
[ 1.836820] EXT4-fs (sda3): mounted filesystem 1648b2af-5330-4afc-b0a3-5d5edde83507 ro with ordered data mode. Quota mode: none.
[ 1.844135] usb 1-11.2: new low-speed USB device number 5 using xhci_hcd
[ 2.019934] dracut: Mounted root filesystem /dev/sda3
[ 2.047282] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 2.047682] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 2.048062] usb 1-11.2: Product: Compaq USB Keyboard
[ 2.048436] usb 1-11.2: Manufacturer: CHICONY
[ 2.058800] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.0002/input/input9
[ 2.118448] hid-generic 0003:049F:0051.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 2.126871] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.0003/input/input10
[ 2.146962] dracut: Switching root
[ 2.184784] hid-generic 0003:049F:0051.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 6.712257] r8169 0000:02:00.0: enabling device (0100 -> 0103)
[ 6.712353] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.715043] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:13:3b:30:0e:75, XID 2c9, IRQ 29
[ 6.715047] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 6.729051] e1000e: Intel(R) PRO/1000 Network Driver
[ 6.729054] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.729215] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.793001] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230628/utaddress-204)
[ 6.793008] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 6.793011] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230628/utaddress-204)
[ 6.793014] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 6.793015] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230628/utaddress-204)
[ 6.793017] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230628/utaddress-204)
[ 6.793020] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 6.793021] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20230628/utaddress-204)
[ 6.793023] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20230628/utaddress-204)
[ 6.793025] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 6.793026] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.804822] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 6.818112] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 6.874873] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) a0:48:1c:9e:13:df
[ 6.874878] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
[ 6.875257] e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 7.065260] iTCO_vendor_support: vendor-support=0
[ 7.183440] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 7.183464] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.183888] i2c i2c-0: 4/4 memory slots populated (from DMI)
[ 7.184179] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 7.184466] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 7.184748] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 7.185026] i2c i2c-0: Successfully instantiated SPD at 0x53
[ 7.240210] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 7.240242] usbcore: registered new interface driver usblp
[ 7.267929] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
[ 7.268302] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 7.274173] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.274747] at24 0-0050: 256 byte spd EEPROM, read-only
[ 7.274768] at24 0-0051: supply vcc not found, using dummy regulator
[ 7.275288] at24 0-0051: 256 byte spd EEPROM, read-only
[ 7.275301] at24 0-0052: supply vcc not found, using dummy regulator
[ 7.275814] at24 0-0052: 256 byte spd EEPROM, read-only
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Tue May 14, 2024 9:45 pm    Post subject: Reply with quote

next 100

7.275826] at24 0-0053: supply vcc not found, using dummy regulator
[ 7.276335] at24 0-0053: 256 byte spd EEPROM, read-only
[ 7.313548] e1000e 0000:00:19.0 eno1: renamed from eth1
[ 7.359181] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 7.417827] snd_cmipci 0000:04:00.0: enabling device (0180 -> 0181)
[ 7.645193] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 7.645203] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.645208] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.645211] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.645214] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.875889] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102)
[ 7.876261] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[ 7.992138] input: HP WMI hotkeys as /devices/virtual/input/input13
[ 8.122281] EXT4-fs (sda3): re-mounted 1648b2af-5330-4afc-b0a3-5d5edde83507 r/w. Quota mode: none.
[ 8.184214] intel_rapl_common: Found RAPL domain package
[ 8.184218] intel_rapl_common: Found RAPL domain core
[ 8.184219] intel_rapl_common: Found RAPL domain uncore
[ 8.184221] intel_rapl_common: Found RAPL domain dram
[ 8.184226] intel_rapl_common: package-0:package:long_term locked by BIOS
[ 8.184229] intel_rapl_common: package-0:package:short_term locked by BIOS
[ 8.281439] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 8.281455] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[ 8.281463] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 8.281469] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 8.281473] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 8.281477] snd_hda_codec_realtek hdaudioC2D0: Mic=0x1a
[ 8.281482] snd_hda_codec_realtek hdaudioC2D0: Line=0x1b
[ 8.317508] EXT4-fs (sda3): re-mounted 1648b2af-5330-4afc-b0a3-5d5edde83507 r/w. Quota mode: none.
[ 8.327465] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[ 8.327508] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[ 8.327544] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[ 8.327578] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[ 8.543262] Console: switching to colour dummy device 80x25
[ 8.543320] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 8.544035] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.554616] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 8.554956] ACPI: video: [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 8.555274] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_fence_ops [i915])
[ 8.568296] fbcon: i915drmfb (fb0) is primary device
[ 8.654003] Console: switching to colour frame buffer device 128x48
[ 8.672732] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 8.710904] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input18
[ 8.710947] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input19
[ 8.710981] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input20
[ 8.792798] Adding 1048572k swap on /dev/sda2. Priority:-2 extents:1 across:1048572k
[ 10.070675] elogind-daemon[1435]: New seat seat0.
[ 10.071443] elogind-daemon[1435]: Watching system buttons on /dev/input/event1 (Power Button)
[ 10.071485] elogind-daemon[1435]: Watching system buttons on /dev/input/event0 (Power Button)
[ 10.071808] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)
[ 12.471710] 8021q: 802.1Q VLAN Support v1.8
[ 12.580801] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.581050] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.581272] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 12.581305] Loading firmware: regulatory.db
[ 12.665259] Loading firmware: regulatory.db.p7s
[ 12.787316] Loading firmware: rtl_nic/rtl8168e-3.fw
[ 12.787347] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 12.787352] r8169 0000:02:00.0: Unable to load firmware rtl_nic/rtl8168e-3.fw (-2)
[ 12.788041] RTL8211E Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[ 12.856425] r8169 0000:02:00.0 enp2s0: Link is Down
[ 15.805951] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.064250] elogind-daemon[1435]: New session c1 of user sddm.
[ 17.457343] elogind-daemon[1435]: Removed session c1.
[ 17.547526] elogind-daemon[1435]: New session c2 of user sddm.
[ 17.553390] elogind-daemon[1435]: Removed session c2.
[ 17.630860] elogind-daemon[1435]: New session c3 of user sddm.
[ 17.636209] elogind-daemon[1435]: Removed session c3.
[ 17.720864] elogind-daemon[1435]: New session c4 of user sddm.
[ 17.726345] elogind-daemon[1435]: Removed session c4.
[ 17.807533] elogind-daemon[1435]: New session c5 of user sddm.
[ 17.813018] elogind-daemon[1435]: Removed session c5.
[ 36.737599] elogind-daemon[1435]: New session 1 of user root.
[ 41.063724] usb 1-11: USB disconnect, device number 3
[ 41.063736] usb 1-11.1: USB disconnect, device number 4
[ 41.135460] usb 1-11.2: USB disconnect, device number 5
[ 62.047478] usb 1-11: new high-speed USB device number 6 using xhci_hcd
[ 62.187706] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 62.187719] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 62.187725] usb 1-11: Product: USB 2.0 Hub
[ 62.191341] hub 1-11:1.0: USB hub found
[ 62.191377] hub 1-11:1.0: 4 ports detected
[ 62.570812] usb 1-11.1: new low-speed USB device number 7 using xhci_hcd
[ 62.766116] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 62.766129] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 62.766136] usb 1-11.1: Product: Usb Mouse
[ 62.766140] usb 1-11.1: Manufacturer: SIGMACHIP
[ 62.771750] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.0004/input/input21
[ 62.827865] hid-generic 0003:1C4F:0048.0004: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 63.000821] usb 1-11.2: new low-speed USB device number 8 using xhci_hcd
[ 63.200766] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 63.200779] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 63.200786] usb 1-11.2: Product: Compaq USB Keyboard
[ 63.200790] usb 1-11.2: Manufacturer: CHICONY
[ 63.211286] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.0005/input/input22
[ 63.268279] hid-generic 0003:049F:0051.0005: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 63.277255] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.0006/input/input23
[ 63.331442] hid-generic 0003:049F:0051.0006: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 63.403157] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)
[ 118.700671] usb 1-11: USB disconnect, device number 6
[ 118.700682] usb 1-11.1: USB disconnect, device number 7
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Tue May 14, 2024 9:47 pm    Post subject: Reply with quote

rest total 1102 lines

118.772345] usb 1-11.2: USB disconnect, device number 8
[ 415.390713] usb 1-11: new high-speed USB device number 9 using xhci_hcd
[ 415.530949] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 415.530962] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 415.530969] usb 1-11: Product: USB 2.0 Hub
[ 415.534593] hub 1-11:1.0: USB hub found
[ 415.534631] hub 1-11:1.0: 4 ports detected
[ 415.914047] usb 1-11.1: new low-speed USB device number 10 using xhci_hcd
[ 416.109309] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 416.109323] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 416.109329] usb 1-11.1: Product: Usb Mouse
[ 416.109333] usb 1-11.1: Manufacturer: SIGMACHIP
[ 416.114845] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.0007/input/input25
[ 416.171130] hid-generic 0003:1C4F:0048.0007: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 416.344051] usb 1-11.2: new low-speed USB device number 11 using xhci_hcd
[ 416.544109] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 416.544123] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 416.544129] usb 1-11.2: Product: Compaq USB Keyboard
[ 416.544133] usb 1-11.2: Manufacturer: CHICONY
[ 416.555008] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.0008/input/input26
[ 416.611481] hid-generic 0003:049F:0051.0008: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 416.619636] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.0009/input/input27
[ 416.674629] hid-generic 0003:049F:0051.0009: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 416.766229] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)
[ 487.327737] usb 1-11: USB disconnect, device number 9
[ 487.327749] usb 1-11.1: USB disconnect, device number 10
[ 487.395357] usb 1-11.2: USB disconnect, device number 11
[ 563.007338] usb 1-11: new high-speed USB device number 12 using xhci_hcd
[ 563.147568] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 563.147581] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 563.147587] usb 1-11: Product: USB 2.0 Hub
[ 563.148753] hub 1-11:1.0: USB hub found
[ 563.148796] hub 1-11:1.0: 4 ports detected
[ 563.527339] usb 1-11.1: new low-speed USB device number 13 using xhci_hcd
[ 563.722540] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 563.722553] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 563.722559] usb 1-11.1: Product: Usb Mouse
[ 563.722564] usb 1-11.1: Manufacturer: SIGMACHIP
[ 563.727963] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.000A/input/input29
[ 563.784178] hid-generic 0003:1C4F:0048.000A: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 563.957319] usb 1-11.2: new low-speed USB device number 14 using xhci_hcd
[ 564.156944] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 564.156958] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 564.156964] usb 1-11.2: Product: Compaq USB Keyboard
[ 564.156968] usb 1-11.2: Manufacturer: CHICONY
[ 564.167159] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.000B/input/input30
[ 564.221015] hid-generic 0003:049F:0051.000B: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 564.229733] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.000C/input/input31
[ 564.284239] hid-generic 0003:049F:0051.000C: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 564.359554] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)
[ 617.899480] usb 1-11: USB disconnect, device number 12
[ 617.899491] usb 1-11.1: USB disconnect, device number 13
[ 617.971832] usb 1-11.2: USB disconnect, device number 14
[ 718.077296] usb 1-11: new high-speed USB device number 15 using xhci_hcd
[ 718.217513] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 718.217526] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 718.217532] usb 1-11: Product: USB 2.0 Hub
[ 718.221170] hub 1-11:1.0: USB hub found
[ 718.221208] hub 1-11:1.0: 4 ports detected
[ 718.600633] usb 1-11.1: new low-speed USB device number 16 using xhci_hcd
[ 718.795683] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 718.795697] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 718.795703] usb 1-11.1: Product: Usb Mouse
[ 718.795707] usb 1-11.1: Manufacturer: SIGMACHIP
[ 718.801125] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.000D/input/input33
[ 718.857828] hid-generic 0003:1C4F:0048.000D: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 719.030634] usb 1-11.2: new low-speed USB device number 17 using xhci_hcd
[ 719.230279] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 719.230293] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 719.230299] usb 1-11.2: Product: Compaq USB Keyboard
[ 719.230303] usb 1-11.2: Manufacturer: CHICONY
[ 719.240832] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.000E/input/input34
[ 719.297630] hid-generic 0003:049F:0051.000E: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 719.306419] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.000F/input/input35
[ 719.360891] hid-generic 0003:049F:0051.000F: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 719.449528] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)
[ 851.005688] usb 1-11: USB disconnect, device number 15
[ 851.005711] usb 1-11.1: USB disconnect, device number 16
[ 851.071620] usb 1-11.2: USB disconnect, device number 17
[ 926.650572] usb 1-11: new high-speed USB device number 18 using xhci_hcd
[ 926.790801] usb 1-11: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 926.790814] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 926.790821] usb 1-11: Product: USB 2.0 Hub
[ 926.794462] hub 1-11:1.0: USB hub found
[ 926.794497] hub 1-11:1.0: 4 ports detected
[ 927.173909] usb 1-11.1: new low-speed USB device number 19 using xhci_hcd
[ 927.369072] usb 1-11.1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 927.369085] usb 1-11.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 927.369092] usb 1-11.1: Product: Usb Mouse
[ 927.369096] usb 1-11.1: Manufacturer: SIGMACHIP
[ 927.375027] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.0/0003:1C4F:0048.0010/input/input37
[ 927.430892] hid-generic 0003:1C4F:0048.0010: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-11.1/input0
[ 927.603890] usb 1-11.2: new low-speed USB device number 20 using xhci_hcd
[ 927.803740] usb 1-11.2: New USB device found, idVendor=049f, idProduct=0051, bcdDevice= 1.05
[ 927.803754] usb 1-11.2: New USB device strings: Mfr=1, Product=8, SerialNumber=0
[ 927.803760] usb 1-11.2: Product: Compaq USB Keyboard
[ 927.803764] usb 1-11.2: Manufacturer: CHICONY
[ 927.814530] input: CHICONY Compaq USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.0/0003:049F:0051.0011/input/input38
[ 927.871376] hid-generic 0003:049F:0051.0011: input,hidraw1: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input0
[ 927.879462] input: CHICONY Compaq USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2:1.1/0003:049F:0051.0012/input/input39
[ 927.934541] hid-generic 0003:049F:0051.0012: input,hiddev96,hidraw2: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:14.0-11.2/input1
[ 928.009423] elogind-daemon[1435]: Watching system buttons on /dev/input/event3 (CHICONY Compaq USB Keyboard)


hope you can use this

god night Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 5:24 am    Post subject: https://0x0.st/XKDD.txt Reply with quote

Maybe this is better

https://0x0.st/XKDD.txt


/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 6:37 am    Post subject: Problem discription Reply with quote

NeddySeagoon

The problem now is that I can get a window with KDE without keyboard and mouse on startx

on /etc/init.d/display-manager start I get a black screen flashing point in right up corner and a square white following the mouse movement


/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 8:08 am    Post subject: Reply with quote

NeddySeagoon

Now I think I got it!!!

reboot dmesg http://0x0.st/XKkp.txt


SDDM start and fail

/var/log/Xorg.0.log http://0x0.st/XKkO.0.log

norm user ~/.local/share/xorg/Xorg.0.log http://0x0.st/XKkV.0.log

is this right?

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 4:53 pm    Post subject: /var/log/sddm.log Reply with quote

/var/log/sddm.log

http://0x0.st/XK53.log
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 6:11 pm    Post subject: startx from user Reply with quote

startx from user

http://0x0.st/XKRS.txt
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54358
Location: 56N 3W

PostPosted: Wed May 15, 2024 6:31 pm    Post subject: Reply with quote

borje2,

Code:
# dmesg
[    0.000000] Linux version 6.6.30-gentoo-dist (root@pomiot) (x86_64-pc-linux-gnu-gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.40 p7) 2.40.0) #1 SMP PREEMPT_DYNAMIC Thu May  2 17:09:53 -00 2024
...
is correct.

Code:
[    8.094876] Console: switching to colour frame buffer device 128x48
[    8.113170] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

You are using the i915drmfb for your console. That's good.

dmesg looks good.

So is /var/log/sddm.log.
It goes well until ...

Code:
[11:33:26.029] (II) HELPER: Starting X11 session: "/usr/bin/X -nolisten tcp -background none -seat seat0 -noreset -keeptty -novtswitch -verbose 3" "/usr/bin/sddm-greeter --socket /tmp/sddm--tmkipY"
[11:33:26.030] (EE) HELPER: Failed to take control of "/dev/tty1" ("root"): Operation not permitted
[11:33:26.030] (II) DAEMON: Greeter session started successfully
[11:33:26.030] (II) HELPER: [PAM] Closing session
[11:33:26.031] (II) HELPER: [PAM] Ended.
[11:33:26.414] (WW) DAEMON: Auth: sddm-helper exited with 5
[11:33:26.414] (II) DAEMON: Greeter stopped. SDDM::Auth::HELPER_TTY_ERROR


Can you run
Code:
wgetpaste -s 0x0 -c 'emerge --info'
That will tell us how you how set up your Gentoo.
Tell us the link.

and
Code:
emerge pciutils
if you don't have it installed yet
Code:
wgetpaste -s 0x0 -c 'lspci -nnk'

This shows all the hardware attached to the PCIe bus in your system and the kernel drivers in use.
Tell us the link.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 7:45 pm    Post subject: Reply with quote

emerge --info

http://0x0.st/XK7-.bin

emerge pciutils

http://0x0.st/XK7H.txt

lspci --nnk

http://0x0.st/XK78.txt

hope ok

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Wed May 15, 2024 8:12 pm    Post subject: Reply with quote

lspci -nnk

http://0x0.st/XK72.txt

/Borje
Back to top
View user's profile Send private message
pietinger
Moderator
Moderator


Joined: 17 Oct 2006
Posts: 4282
Location: Bavaria

PostPosted: Wed May 15, 2024 10:59 pm    Post subject: Reply with quote

borje2,

first of all: You are in best hand with @Neddy ... and yes, your system log is absolutely okay and fine ... so only a short question, because:

1. You didnt had package "pciutils" on your system before you have emerged it ... but ...

2. You have profile: "default/linux/amd64/23.0/desktop/plasma" (which is good and correct)

Now I know that you would have got package pciutils automatically with this profile ... IF ... if you had installed it ... with a world-update !

Only changing the profile with "eselect profile set X" will not install any application.

So I suggest you do as first (after booting and logging in as root) a:
Code:
emerge -uUDvp @world

This will not install anything ... it will only show you what portage WOULD install ... Do you see now MANY packages (maybe more than 300) ?

If yes: Install it with:
Code:
emerge -uUDv @world

_________________
https://wiki.gentoo.org/wiki/User:Pietinger
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 2:54 am    Post subject: Reply with quote

Thank's Peter I was using info Profile (portage) when changing profile

I shall follow your instructions

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 3:05 am    Post subject: Reply with quote

Peter
Kod: emerge -uUDvp @ world

return 0 package

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 3:39 am    Post subject: Reply with quote

NeddySeagoon

with installation #2 of xorg-server

I install x11-wm/twm and x11-terms/xterm to check startx

but I did'nt know how to depclean them I only unmerge them

I believe I could have something left from them
I can install them again and depclean if you tell me how to do that

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 6:46 am    Post subject: Background Reply with quote

NeddySeagoon

Background

This is a new installation I follow wiki quick installation guide
every thing works fine but I could not get grub-mkconfig to work no kernel found

with that installation they recommend 4 partition
1 vfat32 for /efi
2 ext4 for /boot
3 swap
4 ext4 root /

I also had source kernel 6.6.29

I got help from Peter thanks Peter

he show me 3 partition
1 vfat32 for /efi
2 swap
3 ext4 /
witch I now have

and also recommend me to use bin kernel which I now use 6.6.30

after that I could get grub to work with efi

I also found a way to depclean x11-wm/twm and x11-terms/xterm

now the only thing missing is KDE plasma with keyboard and mouse!!

/Borje
Back to top
View user's profile Send private message
pietinger
Moderator
Moderator


Joined: 17 Oct 2006
Posts: 4282
Location: Bavaria

PostPosted: Thu May 16, 2024 12:34 pm    Post subject: Re: Background Reply with quote

borje2 wrote:
This is a new installation I follow wiki quick installation guide

Yes, I see ... and you have done that all correct. Now ... the only steps you have to do after this to get a KDE/plasma system is:

1. Selecting the correct profile and doing a world-update. This you have also already done. Good.

2. Installing X.11 AND KDE/Plasma:

Code:
# emerge -vD xorg-server

This is only neccessary if you have not a english/american keyboard:
---------------------------
# cd /etc/X11
# mkdir xorg.conf.d
# cd xorg.conf.d
# cp /usr/share/X11/xorg.conf.d/40-libinput.conf .
# nano -w 40-libinput.conf
=> add to keyboard section: Option "xkb_layout" "de"
-------------------------

# emerge -vD plasma-meta kdecore-meta
# rc-update add elogind boot
# rc-update add display-manager default
# nano -w /etc/conf.d/display-manager
=> DISPLAYMANAGER="sddm"

You can check which rc-scripts you have enabled at which runlevel with:
Code:
# rc-update

_________________
https://wiki.gentoo.org/wiki/User:Pietinger
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 12:59 pm    Post subject: Reply with quote

Thanks Peter yes I have done all that

https://bpa.st/NIBA


/Borje
Back to top
View user's profile Send private message
pietinger
Moderator
Moderator


Joined: 17 Oct 2006
Posts: 4282
Location: Bavaria

PostPosted: Thu May 16, 2024 2:25 pm    Post subject: Reply with quote

What happens if you add display-manager to runlevel "default" and reboot ?
Code:
# rc-update add display-manager default
# reboot

_________________
https://wiki.gentoo.org/wiki/User:Pietinger
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 3:35 pm    Post subject: Reply with quote

Peter I did not have kdecore-meta
I am install it now

I have remove display-manager it comes up with black screen every time I start

I can try after kdecore finish

/borje
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54358
Location: 56N 3W

PostPosted: Thu May 16, 2024 3:51 pm    Post subject: Reply with quote

borje2,

A whole new install is a whole new problem space. :)

What is the exact full name of the stage3 file you used in the install?

What profile do you have selected?

pietinger knows his stuff :)
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 6:17 pm    Post subject: Reply with quote

I don't remember the date for stage 3

I know I had stage3-amd64-desktop-openrc

but later I change profile to desktop plasma 23.0

is that any help?

/Borje
Back to top
View user's profile Send private message
borje2
Tux's lil' helper
Tux's lil' helper


Joined: 19 Apr 2024
Posts: 102
Location: Gällivare

PostPosted: Thu May 16, 2024 6:47 pm    Post subject: Reply with quote

Peter

reboot after rc-update add display-manager default

black screen

/Borje
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54358
Location: 56N 3W

PostPosted: Thu May 16, 2024 6:54 pm    Post subject: Reply with quote

borje2,

The profile change changes some default settings but they are not implemented until you run
Code:
emerge -uDNav @world

This rebuilds your install to take account of the new settings.

There is a wiki page for KDE Plasma, yo need to follow that too.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page Previous  1, 2, 3, 4, 5  Next
Page 3 of 5

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum