| View previous topic :: View next topic |
| Author |
Message |
bagas
Apprentice
Joined: 29 Jun 2018
Posts: 206
|
 Posted: Mon Mar 25, 2024 6:38 am Post subject: Error when changing profile from 17.1 to 23.0. |
 |
|
Hello.
Error when changing profile from 17.1 to 23.0.
Item 5.
In /etc/portage/make.conf
| Code: | egrep CHOST /etc/portage/make.conf
#CHOST="x86_64-pc-linux-gnu"
|
Item 6.
I'm changing my profile.
| Code: | was a profile
[12] default/linux/amd64/17.1/no-multilib (exp)
became
[29] default/linux/amd64/23.0/no-multilib (stable) * |
Item 9.
What am I doing wrong?
| Code: | serv0 ~ # emerge --ask --oneshot sys-devel/binutils
These are the packages that would be merged, in order:
Calculating dependencies... done!
Dependency resolution took 8.82 s (backtrack: 0/20).
[ebuild R ] sys-devel/binutils-2.41-r5 USE="cet* zstd*"
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) sys-devel/binutils-2.41-r5::gentoo
* binutils-2.41.tar.xz BLAKE2B SHA512 size ;-) ... [ ok ]
* binutils-2.41-patches-5.tar.xz BLAKE2B SHA512 size ;-) ... [ ok ]
*
* Your profile is of type merged-usr, but your directories
* on-disk are of type split-usr.
* Please switch back to your last valid profile setting and
* read the documentation about merged-usr and profile changes.
*
* ERROR: sys-devel/binutils-2.41-r5::gentoo failed (setup phase):
* ERROR: 23.0 merged-usr profile, but disk is split-usr
*
* Call stack:
* ebuild.sh, line 606: Called __source_all_bashrcs
* ebuild.sh, line 426: Called __try_source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* ebuild.sh, line 487: Called __qa_source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* ebuild.sh, line 123: Called source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* profile.bashrc, line 44: Called die
* The specific snippet of code:
* die "ERROR: 23.0 merged-usr profile, but disk is split-usr"
*
* If you need support, post the output of `emerge --info '=sys-devel/binutils-2.41-r5::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/binutils-2.41-r5::gentoo'`.
* The complete build log is located at '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/temp/build.log'.
* The ebuild environment file is located at '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/temp/die.env'.
* Working directory: '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/empty'
* S: '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/work/binutils-2.41'
>>> Failed to emerge sys-devel/binutils-2.41-r5, Log file:
>>> '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/temp/build.log'
* Messages for package sys-devel/binutils-2.41-r5:
*
* Your profile is of type merged-usr, but your directories
* on-disk are of type split-usr.
* Please switch back to your last valid profile setting and
* read the documentation about merged-usr and profile changes.
*
* ERROR: sys-devel/binutils-2.41-r5::gentoo failed (setup phase):
* ERROR: 23.0 merged-usr profile, but disk is split-usr
*
* Call stack:
* ebuild.sh, line 606: Called __source_all_bashrcs
* ebuild.sh, line 426: Called __try_source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* ebuild.sh, line 487: Called __qa_source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* ebuild.sh, line 123: Called source '/usr/portage/profiles/releases/23.0/profile.bashrc'
* profile.bashrc, line 44: Called die
* The specific snippet of code:
* die "ERROR: 23.0 merged-usr profile, but disk is split-usr"
*
* If you need support, post the output of `emerge --info '=sys-devel/binutils-2.41-r5::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/binutils-2.41-r5::gentoo'`.
* The complete build log is located at '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/temp/build.log'.
* The ebuild environment file is located at '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/temp/die.env'.
* Working directory: '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/empty'
* S: '/mnt/tmp/portage/sys-devel/binutils-2.41-r5/work/binutils-2.41'
serv0 ~ # |
_________________
BSD, Linux systems blog |
|
| Back to top |
|
 |
Juippisi
Developer
Joined: 30 Sep 2005
Posts: 724
Location: /home
|
| Posted: Mon Mar 25, 2024 6:51 am Post subject: |
|
|
| Read the error you're getting, then read the news item carefully again (part 6.) |
|
| Back to top |
|
|
bagas
Apprentice
Joined: 29 Jun 2018
Posts: 206
|
| Posted: Mon Mar 25, 2024 6:56 am Post subject: |
|
|
I use openrc.
hmm, I probably need to switch to this profile first
| Code: | | [49] default/linux/amd64/23.0/split-usr/no-multilib (stable) |
And then migrate to
| Code: | | [29] default/linux/amd64/23.0/no-multilib (stable) |
Am I right?
_________________
BSD, Linux systems blog |
|
| Back to top |
|
|
sdauth
Guru
Joined: 19 Sep 2018
Posts: 569
Location: Ásgarðr
|
| Posted: Mon Mar 25, 2024 7:10 am Post subject: |
|
|
@bagas:
Yes this is correct. Migrating later to merged-usr is optional though. Personally, I skip it for now. I'm sick of the rebuild time with my old cpu already  |
|
| Back to top |
|
|
e8root
n00b
Joined: 09 Feb 2024
Posts: 71
|
| Posted: Mon Mar 25, 2024 8:36 am Post subject: |
|
|
Does migration to merged-usr require rebuilding anything? I mean except those few packages which have changed flag due to profile change.
Imho it is mostly about executing migration script before changing profile. In theory it could be done while migrating top 23.0 if you don't want to rebuild these packages twice in a row.
That said this is probably untested migration procedure so most probably officially unsupported.
_________________
Unix Wars - Episode V: AT&T Strikes Back |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4157
Location: Bavaria
|
| Posted: Mon Mar 25, 2024 4:00 pm Post subject: |
|
|
| sdauth wrote: | | [...] Personally, I skip it for now. I'm sick of the rebuild time with my old cpu already |
Dont worry ... 
| e8root wrote: | | Does migration to merged-usr require rebuilding anything? [...] |
No !
I made the switch from split-usr to merged-usr (OpenRC here) one day after the switch to 23.0 and only 17 packages were affected ... so no comparison to the emerge -e ...
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2963
Location: Edge of marsh USA
|
| Posted: Mon Mar 25, 2024 4:56 pm Post subject: |
|
|
If you have split-usr, You don't EVER have to migrate to merged-usr as long as split-usr continues to be supported by your profile.
The migration instructions in the news gives instructions on what to do and what order to do them in. Stick with that.
My x86 system, AMD Phenom 3x, 8 GB RAM system is currently on 829 or 1285 packages after 11 hours running. The migration emerge --emptytree is running in an open window in the lower right hand corner of my main screen. I'm not especially watching it. I'm just aware of it.
ADDED: Ultimately, it took 26 hours of emerge --emtytree to complete the migration. No issues. I think the instructions were great.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
yayo
Tux's lil' helper
Joined: 19 May 2014
Posts: 88
|
| Posted: Wed Mar 27, 2024 2:47 pm Post subject: |
|
|
| figueroa wrote: | | I think the instructions were great. |
I agree... but maybe it was not enough. : P
1st. is seems that there was a chance to avoid to rebuild some packages (like gcc, done right before) to save build time, as discussed here:
https://forums.gentoo.org/viewtopic-t-1168028.html?sid=f19ef2f1a0a2fbdc99df7e8fd367a55e
2nd. I got an error with sys-fs/vhba
| Code: | * Messages for package sys-fs/vhba-20240202:
* GCC_PLUGINS is enabled in the kernel and plugin version mismatch issues
* have been detected. Please `make clean` and rebuild the kernel using
* the current version of GCC (or re-install for distribution kernels).
* ERROR: sys-fs/vhba-20240202::gentoo failed (setup phase):
* kernel 6.6.21-gentoo needs to be rebuilt |
So I guess it's something like: 1. recompile all but external modules, 2. recompile the kernel, 3. recompile the modules.
But it's not written in the instructions.
(note: yes, I could have resumed with --exclude vhba or something, maybe, but I committed a mistake somewhere and I got a reset of the resume session, so I have to restart from scratch... :/ )
Nothing that cannot be fixed, but still annoying. |
|
| Back to top |
|
|
CaptainBlood
Advocate
Joined: 24 Jan 2010
Posts: 3627
|
| Posted: Wed Mar 27, 2024 3:44 pm Post subject: |
|
|
sys-fs/vhba here too.
Along with net-misc/r8168, another kernel external module 
Thks 4 ur attention, interest & support.
_________________
USE="-* ..." in /etc/portage/make.conf here.
LT: "I've been doing a passable imitation of the Fontana di Trevi, except my medium is mucus. Sooo much mucus. " |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2963
Location: Edge of marsh USA
|
| Posted: Wed Mar 27, 2024 4:05 pm Post subject: |
|
|
The external modules issue, if it turns out to be a persistent issue, would be a perfect use-case for:
| Code: | | emerge --skiprfirst --resume |
Then after --emptytree ultimately completes, go back and re-compile the kernel, modules, and external modules, and only then, reboot.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
logrusx
Veteran
Joined: 22 Feb 2018
Posts: 1535
|
| Posted: Wed Mar 27, 2024 5:34 pm Post subject: |
|
|
Does anyone of you guys really need that kernel option enabled?
Do you do any instrumentation and static analysis?
Best Regards,
Georgi |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2963
Location: Edge of marsh USA
|
| Posted: Wed Mar 27, 2024 6:00 pm Post subject: |
|
|
I was under the impression that GCC_PLUGINS may have been enabled by default, or by something else. I don't have a known use for it, and I don't have installed sys-fs/vhba. I'm eagerly awaiting the continuation of this thread by others who might actually know.
Added: By the way, some info at - https://github.com/torvalds/linux/blob/master/Documentation/kbuild/gcc-plugins.rst where it reads, in part:
| Quote: | | The GCC plugin infrastructure of the kernel supports building out-of-tree modules, cross-compilation and building in a separate directory. |
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
pietinger
Moderator
Joined: 17 Oct 2006
Posts: 4157
Location: Bavaria
|
| Posted: Wed Mar 27, 2024 6:17 pm Post subject: |
|
|
| figueroa wrote: | | I was under the impression that GCC_PLUGINS may have been enabled by default, [...] |
Yes, it is enabled by default ... AND ... you will need it for GENTOO_KERNEL_SELF_PROTECTION ...
_________________
https://wiki.gentoo.org/wiki/User:Pietinger |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2963
Location: Edge of marsh USA
|
| Posted: Thu Mar 28, 2024 2:39 am Post subject: |
|
|
Thanks, pietinger.
The machine where I need out-of-kernel modules has now successfully emerged virtualbox-modules as part of the migration to 23 series profile without any issue. The out-of-kernel modules issue and kernel GCC_PLUGINS might not be a systemic migration issue.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
pcmaster
Advocate
Joined: 04 Dec 2003
Posts: 2222
Location: Barcelona
|
| Posted: Thu Mar 28, 2024 9:31 am Post subject: |
|
|
In the system news, also in https://www.gentoo.org/support/news-items/2024-03-22-new-23-profiles.html
| Code: | 6. Select the 23.0 profile corresponding to your current profile, either using
"eselect profile" or by manually setting the profile symlink.
Note that old profiles are by default split-usr and the 23.0 profiles by
default merged-usr. Do NOT change directory scheme now, since this will
mess up your system!
Instead, make sure that the new profile has the same property: for example,
OLD default/linux/amd64/17.1
==> NEW default/linux/amd64/23.0/split-usr
(added "split-usr")
OLD default/linux/amd64/17.1/systemd/merged-usr
==> NEW default/linux/amd64/23.0/systemd
(removed "merged-usr")
A detailed table of the upgrade paths can be found at [5]. Please consult it.
In some cases (hppa, x86) the table will tell you to pick between two choices.
What you need should be obvious from your *old* CHOST value (from step 4). |
if you are using default/linux/amd64/17.1/no-multilib in 17.1, yo can select default/linux/amd64/23.0/split-usr/no-multilib as new profile
_________________
pcmaster |
|
| Back to top |
|
|
|
Installing Gentoo
