| View previous topic :: View next topic |
| Author |
Message |
sokrovenno
n00b
Joined: 23 Aug 2023
Posts: 65
|
 Posted: Thu Feb 01, 2024 12:12 pm Post subject: Fan not being used?? [Solved] |
 |
|
Recently I've realized that my notebook is heating pretty fast. As I live in hot country and we are on summer I thought it was normal. But recently I realized that it is not normal. I feel my fingers "burning" as I touch my keyboard. My Notebook top temperature was 60ºC or 62ºC while compiling and it kept around 43º~ 45º while normal usage. Now it is like this after a couple of minutes turned on:
| Code: | pch_skylake-virtual-0
Adapter: Virtual device
temp1: +47.5°C
BAT1-acpi-0
Adapter: ACPI interface
in0: 12.55 V
curr1: 747.00 mA
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +49.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +49.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +49.0°C (high = +100.0°C, crit = +100.0°C)
drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1: +36.0°C (low = +0.0°C, high = +60.0°C)
(crit low = -41.0°C, crit = +85.0°C)
(lowest = +34.0°C, highest = +36.0°C)
nvme-pci-0300
Adapter: PCI adapter
Composite: +36.9°C (low = -0.1°C, high = +82.8°C)
(crit = +89.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +49.0°C (crit = +99.0°C)
temp2: +49.0°C (crit = +99.0°C)
|
I think I cannot hear my fan working and I emerged hardinfo and cannot find nothing related to FAN. I can't find anything about fan on my dmesg output, but I'm not sure if it should appear there.
Here is an example while I was compiling hardinfo:
| Code: | pch_skylake-virtual-0
Adapter: Virtual device
temp1: +56.5°C
BAT1-acpi-0
Adapter: ACPI interface
in0: 12.51 V
curr1: 940.00 mA
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +66.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +66.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +65.0°C (high = +100.0°C, crit = +100.0°C)
drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1: +36.0°C (low = +0.0°C, high = +60.0°C)
(crit low = -41.0°C, crit = +85.0°C)
(lowest = +34.0°C, highest = +36.0°C)
nvme-pci-0300
Adapter: PCI adapter
Composite: +36.9°C (low = -0.1°C, high = +82.8°C)
(crit = +89.8°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +65.0°C (crit = +99.0°C)
temp2: +65.0°C (crit = +99.0°C)
|
As I said, I never seen anything higher than 62ºC before. Is there a way where I can check if my fan is working other than open my notebook and check the fan itself?
Here are my .config
Last edited by sokrovenno on Thu Feb 01, 2024 1:37 pm; edited 2 times in total |
|
| Back to top |
|
 |
rfx
Tux's lil' helper
Joined: 19 Apr 2023
Posts: 126
Location: de-by
|
| Posted: Thu Feb 01, 2024 12:21 pm Post subject: |
|
|
Do you have a Status for fan in the Bios? It would be interesting if yes, compile something, when it is hot reboot, check bios.
Temperatur looks normal, my Laptop (acer) is in Idle around 30-33° but here it is very cold 
Compiling goes up to 65-70°. But maybe your CPU gets throttled when compiling, if your fan is not working? What CPU is it and how fast it is when compiling "cat /proc/cpuinfo" please |
|
| Back to top |
|
|
sokrovenno
n00b
Joined: 23 Aug 2023
Posts: 65
|
| Posted: Thu Feb 01, 2024 12:28 pm Post subject: |
|
|
| Quote: | | Do you have a Status for fan in the Bios? |
I'm not sure, I can't remember seen it before. I'll check it out.
here is my cpuinfo |
|
| Back to top |
|
|
rfx
Tux's lil' helper
Joined: 19 Apr 2023
Posts: 126
Location: de-by
|
| Posted: Thu Feb 01, 2024 12:50 pm Post subject: |
|
|
| sokrovenno wrote: | | here is my cpuinfo |
Thank you. This is in idle, or? Your CPU should go up to 2300 MHz but it is at 800 MHz. Compile something and check after a few minutes at maximum temperature againt |
|
| Back to top |
|
|
logrusx
Veteran
Joined: 22 Feb 2018
Posts: 1538
|
| Posted: Thu Feb 01, 2024 12:52 pm Post subject: Re: Fan not being used?? |
|
|
| sokrovenno wrote: | | Is there a way where I can check if my fan is working other than open my notebook and check the fan itself? |
I think firmware wouldn't allow fan not to work when temperatures are high, so it might be best if you open your laptop and check if the fan is stuck.
Best Regards,
Georgi |
|
| Back to top |
|
|
sokrovenno
n00b
Joined: 23 Aug 2023
Posts: 65
|
| Posted: Thu Feb 01, 2024 1:36 pm Post subject: |
|
|
| Quote: | | I think firmware wouldn't allow fan not to work when temperatures are high, so it might be best if you open your laptop and check if the fan is stuck. |
Thank you for your response. I'll check it out.
Best Regards,
sokrovenno |
|
| Back to top |
|
|
|
Kernel & Hardware
