| View previous topic :: View next topic |
| Author |
Message |
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
 Posted: Mon Jan 29, 2024 1:27 pm Post subject: startx Failed to set CTM property: -22 |
 |
|
Hi all,
I apologise if this has been asked before but I cannot seem to find an answer. I am attempting to get Xorg and i3 to work on my Ivy Bridge laptop (Intel Core i7-3615QE) but I get this error and cannot seem to find the cause. The X server seems to start (I get a black screen with a unusable cursor and have to kill it from another tty). I am on kernel 6.6.13 with musl C library, currently on unstable mesa (23.3.4) but the same issue occurs on stable. VIDEO_CARDS is set to "Intel" in make.conf and I use clang as the system compiler. I have also tried xf86-video-intel but that causes a segfault. I have tried running as root to make sure there are no permission problems (I know this is a bad idea).
Xorg.0.log:
| Quote: |
[ 34.804]
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[ 34.805] Current Operating System: Linux pontus-x230 6.6.13-gentoo #11 SMP PREEMPT_DYNAMIC Sun Jan 28 22:16:15 UTC 2024 x86_64
[ 34.805] Kernel command line: intel_iommu=on intel_iommu=igfx_off
[ 34.806]
[ 34.806] Current version of pixman: 0.42.2
[ 34.807] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.807] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.810] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 29 13:05:01 2024
[ 34.812] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.813] (==) No Layout section. Using the first Screen section.
[ 34.813] (==) No screen section available. Using defaults.
[ 34.813] (**) |-->Screen "Default Screen Section" (0)
[ 34.813] (**) | |-->Monitor "<default monitor>"
[ 34.813] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.813] (==) Automatically adding devices
[ 34.813] (==) Automatically enabling devices
[ 34.813] (==) Automatically adding GPU devices
[ 34.813] (==) Automatically binding GPU devices
[ 34.813] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 34.813] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 34.813] Entry deleted from font path.
[ 34.813] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 34.813] Entry deleted from font path.
[ 34.813] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 34.813] Entry deleted from font path.
[ 34.813] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 34.813] Entry deleted from font path.
[ 34.814] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi
[ 34.814] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.814] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.814] (II) Module ABI versions:
[ 34.814] X.Org ANSI C Emulation: 0.4
[ 34.814] X.Org Video Driver: 25.2
[ 34.814] X.Org XInput driver : 24.4
[ 34.814] X.Org Server Extension : 10.0
[ 34.814] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.814] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 34.817] (--) PCI:*(0@0:2:0) 8086:0166:8086:0166 rev 9, Mem @ 0xc3c00000/4194304, 0xd0000000/268435456, I/O @ 0x00001000/64, BIOS @ 0x????????/131072
[ 34.817] (II) LoadModule: "glx"
[ 34.817] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 34.827] (II) Module glx: vendor="X.Org Foundation"
[ 34.827] compiled for 1.21.1.11, module version = 1.0.0
[ 34.827] ABI class: X.Org Server Extension, version 10.0
[ 34.827] (==) Matched intel as autoconfigured driver 0
[ 34.827] (==) Matched modesetting as autoconfigured driver 1
[ 34.827] (==) Matched fbdev as autoconfigured driver 2
[ 34.827] (==) Matched vesa as autoconfigured driver 3
[ 34.827] (==) Assigned the driver to the xf86ConfigLayout
[ 34.827] (II) LoadModule: "intel"
[ 34.827] (WW) Warning, couldn't open module intel
[ 34.827] (EE) Failed to load module "intel" (module does not exist, 0)
[ 34.827] (II) LoadModule: "modesetting"
[ 34.827] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 34.829] (II) Module modesetting: vendor="X.Org Foundation"
[ 34.829] compiled for 1.21.1.11, module version = 1.21.1
[ 34.829] Module class: X.Org Video Driver
[ 34.829] ABI class: X.Org Video Driver, version 25.2
[ 34.829] (II) LoadModule: "fbdev"
[ 34.829] (WW) Warning, couldn't open module fbdev
[ 34.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 34.829] (II) LoadModule: "vesa"
[ 34.829] (WW) Warning, couldn't open module vesa
[ 34.829] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 34.829] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 34.829] (--) using VT number 7
[ 34.830] (II) modeset(0): using drv /dev/dri/card0
[ 34.831] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 34.831] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 34.831] (==) modeset(0): RGB weight 888
[ 34.831] (==) modeset(0): Default visual is TrueColor
[ 34.831] (II) Loading sub module "glamoregl"
[ 34.831] (II) LoadModule: "glamoregl"
[ 34.831] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 34.838] (II) Module glamoregl: vendor="X.Org Foundation"
[ 34.838] compiled for 1.21.1.11, module version = 1.0.1
[ 34.838] ABI class: X.Org ANSI C Emulation, version 0.4
[ 35.236] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 4000 (IVB GT2)
[ 35.236] (II) modeset(0): glamor initialized
[ 35.236] (==) modeset(0): VariableRefresh: disabled
[ 35.236] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 35.236] (II) modeset(0): Output LVDS-1 has no monitor section
[ 35.237] (II) modeset(0): Output VGA-1 has no monitor section
[ 35.318] (II) modeset(0): Output HDMI-1 has no monitor section
[ 35.318] (II) modeset(0): Output DP-1 has no monitor section
[ 35.319] (II) modeset(0): Output HDMI-2 has no monitor section
[ 35.320] (II) modeset(0): Output HDMI-3 has no monitor section
[ 35.321] (II) modeset(0): Output DP-2 has no monitor section
[ 35.321] (II) modeset(0): Output DP-3 has no monitor section
[ 35.321] (II) modeset(0): EDID for output LVDS-1
[ 35.321] (II) modeset(0): Manufacturer: LGD Model: 2d8 Serial#: 0
[ 35.321] (II) modeset(0): Year: 2012 Week: 0
[ 35.321] (II) modeset(0): EDID Version: 1.3
[ 35.321] (II) modeset(0): Digital Display Input
[ 35.321] (II) modeset(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 35.321] (II) modeset(0): Gamma: 2.20
[ 35.321] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 35.321] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 35.322] (II) modeset(0): First detailed timing is preferred mode
[ 35.322] (II) modeset(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
[ 35.322] (II) modeset(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
[ 35.322] (II) modeset(0): Manufacturer's mask: 0
[ 35.322] (II) modeset(0): Supported detailed timing:
[ 35.322] (II) modeset(0): clock: 75.2 MHz Image Size: 277 x 156 mm
[ 35.322] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
[ 35.322] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
[ 35.322] (II) modeset(0): LG Display
[ 35.322] (II) modeset(0): LP125WH2-SLB3
[ 35.322] (II) modeset(0): EDID (in hex):
[ 35.322] (II) modeset(0): 00ffffffffffff0030e4d80200000000
[ 35.322] (II) modeset(0): 00160103801c1078ea8855995b558f26
[ 35.322] (II) modeset(0): 1d505400000001010101010101010101
[ 35.322] (II) modeset(0): 010101010101601d56d8500018303040
[ 35.322] (II) modeset(0): 4700159c1000001b0000000000000000
[ 35.322] (II) modeset(0): 00000000000000000000000000fe004c
[ 35.322] (II) modeset(0): 4720446973706c61790a2020000000fe
[ 35.322] (II) modeset(0): 004c503132355748322d534c42330059
[ 35.322] (II) modeset(0): Printing probed modes for output LVDS-1
[ 35.322] (II) modeset(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 35.322] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 35.322] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 35.322] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 35.322] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 35.322] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 35.322] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 35.322] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 35.323] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 35.323] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 35.323] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 35.323] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 35.323] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 35.323] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 35.323] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 35.323] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 35.323] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 35.323] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 35.323] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 35.323] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 35.323] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 35.323] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 35.323] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 35.323] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 35.323] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 35.323] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 35.323] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 35.323] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 35.323] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 35.323] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 35.324] (II) modeset(0): EDID for output VGA-1
[ 35.402] (II) modeset(0): EDID for output HDMI-1
[ 35.402] (II) modeset(0): EDID for output DP-1
[ 35.403] (II) modeset(0): EDID for output HDMI-2
[ 35.404] (II) modeset(0): EDID for output HDMI-3
[ 35.404] (II) modeset(0): EDID for output DP-2
[ 35.404] (II) modeset(0): EDID for output DP-3
[ 35.404] (II) modeset(0): Output LVDS-1 connected
[ 35.404] (II) modeset(0): Output VGA-1 disconnected
[ 35.404] (II) modeset(0): Output HDMI-1 disconnected
[ 35.404] (II) modeset(0): Output DP-1 disconnected
[ 35.404] (II) modeset(0): Output HDMI-2 disconnected
[ 35.404] (II) modeset(0): Output HDMI-3 disconnected
[ 35.404] (II) modeset(0): Output DP-2 disconnected
[ 35.404] (II) modeset(0): Output DP-3 disconnected
[ 35.404] (II) modeset(0): Using exact sizes for initial modes
[ 35.404] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 35.404] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 35.404] (==) modeset(0): DPI set to (96, 96)
[ 35.404] (II) Loading sub module "fb"
[ 35.404] (II) LoadModule: "fb"
[ 35.404] (II) Module "fb" already built-in
[ 35.473] (==) modeset(0): Backing store enabled
[ 35.473] (==) modeset(0): Silken mouse enabled
[ 35.474] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 35.475] (==) modeset(0): DPMS enabled
[ 35.475] (II) modeset(0): [DRI2] Setup complete
[ 35.475] (II) modeset(0): [DRI2] DRI driver: crocus
[ 35.475] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 35.475] (II) Initializing extension Generic Event Extension
[ 35.475] (II) Initializing extension SHAPE
[ 35.475] (II) Initializing extension MIT-SHM
[ 35.475] (II) Initializing extension XInputExtension
[ 35.476] (II) Initializing extension XTEST
[ 35.476] (II) Initializing extension BIG-REQUESTS
[ 35.476] (II) Initializing extension SYNC
[ 35.476] (II) Initializing extension XKEYBOARD
[ 35.476] (II) Initializing extension XC-MISC
[ 35.476] (II) Initializing extension XFIXES
[ 35.476] (II) Initializing extension RENDER
[ 35.476] (II) Initializing extension RANDR
[ 35.476] (II) Initializing extension COMPOSITE
[ 35.476] (II) Initializing extension DAMAGE
[ 35.476] (II) Initializing extension MIT-SCREEN-SAVER
[ 35.476] (II) Initializing extension DOUBLE-BUFFER
[ 35.476] (II) Initializing extension RECORD
[ 35.476] (II) Initializing extension DPMS
[ 35.476] (II) Initializing extension Present
[ 35.476] (II) Initializing extension DRI3
[ 35.476] (II) Initializing extension X-Resource
[ 35.476] (II) Initializing extension XVideo
[ 35.476] (II) Initializing extension XVideo-MotionCompensation
[ 35.476] (II) Initializing extension GLX
[ 35.481] (II) AIGLX: Loaded and initialized crocus
[ 35.481] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 35.481] (II) Initializing extension XFree86-VidModeExtension
[ 35.481] (II) Initializing extension XFree86-DGA
[ 35.481] (II) Initializing extension XFree86-DRI
[ 35.481] (II) Initializing extension DRI2
[ 35.482] (II) modeset(0): Damage tracking initialized
[ 35.482] (II) modeset(0): Setting screen physical size to 361 x 203
[ 35.527] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 35.527] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.527] (II) LoadModule: "evdev"
[ 35.527] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.530] (II) Module evdev: vendor="X.Org Foundation"
[ 35.530] compiled for 1.21.1.11, module version = 2.10.6
[ 35.530] Module class: X.Org XInput Driver
[ 35.530] ABI class: X.Org XInput driver, version 24.4
[ 35.530] (II) Using input driver 'evdev' for 'Power Button'
[ 35.530] (**) Power Button: always reports core events
[ 35.530] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 35.530] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.530] (--) evdev: Power Button: Found keys
[ 35.530] (II) evdev: Power Button: Configuring as keyboard
[ 35.531] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 35.531] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.531] (**) Option "xkb_rules" "evdev"
[ 35.531] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 35.531] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.531] (II) Using input driver 'evdev' for 'Video Bus'
[ 35.531] (**) Video Bus: always reports core events
[ 35.531] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 35.531] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 35.531] (--) evdev: Video Bus: Found keys
[ 35.531] (II) evdev: Video Bus: Configuring as keyboard
[ 35.531] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 35.531] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 35.531] (**) Option "xkb_rules" "evdev"
[ 35.531] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 35.531] (II) No input driver specified, ignoring this device.
[ 35.531] (II) This device may have been added with another device file.
[ 35.531] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 35.531] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 35.531] (II) Using input driver 'evdev' for 'Sleep Button'
[ 35.531] (**) Sleep Button: always reports core events
[ 35.531] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 35.532] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 35.532] (--) evdev: Sleep Button: Found keys
[ 35.532] (II) evdev: Sleep Button: Configuring as keyboard
[ 35.532] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input0/event0"
[ 35.532] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 
[ 35.532] (**) Option "xkb_rules" "evdev"
[ 35.532] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event15)
[ 35.532] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "evdev keyboard catchall"
[ 35.532] (II) Using input driver 'evdev' for 'Yubico YubiKey OTP+FIDO+CCID'
[ 35.532] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
[ 35.532] (**) evdev: Yubico YubiKey OTP+FIDO+CCID: Device: "/dev/input/event15"
[ 35.532] (--) evdev: Yubico YubiKey OTP+FIDO+CCID: Vendor 0x1050 Product 0x407
[ 35.532] (--) evdev: Yubico YubiKey OTP+FIDO+CCID: Found keys
[ 35.532] (II) evdev: Yubico YubiKey OTP+FIDO+CCID: Configuring as keyboard
[ 35.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1050:0407.0001/input/input16/event15"
[ 35.532] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 9)
[ 35.532] (**) Option "xkb_rules" "evdev"
[ 35.532] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 35.532] (II) No input driver specified, ignoring this device.
[ 35.532] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event9)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.533] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event7)
[ 35.533] (II) No input driver specified, ignoring this device.
[ 35.533] (II) This device may have been added with another device file.
[ 35.534] (II) config/udev: Adding input device AT Raw Set 2 keyboard (/dev/input/event4)
[ 35.534] (**) AT Raw Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.534] (II) Using input driver 'evdev' for 'AT Raw Set 2 keyboard'
[ 35.534] (**) AT Raw Set 2 keyboard: always reports core events
[ 35.534] (**) evdev: AT Raw Set 2 keyboard: Device: "/dev/input/event4"
[ 35.534] (--) evdev: AT Raw Set 2 keyboard: Vendor 0x1 Product 0x2
[ 35.534] (--) evdev: AT Raw Set 2 keyboard: Found keys
[ 35.534] (II) evdev: AT Raw Set 2 keyboard: Configuring as keyboard
[ 35.534] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 35.534] (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD, id 10)
[ 35.534] (**) Option "xkb_rules" "evdev"
[ 35.534] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 35.534] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 35.534] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 35.534] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 35.534] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event13"
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 35.534] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 35.534] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 35.534] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 35.534] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.534] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event13"
[ 35.534] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 35.534] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 35.534] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 35.534] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 35.534] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 35.534] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 35.534] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 35.534] (II) No input driver specified, ignoring this device.
[ 35.534] (II) This device may have been added with another device file.
[ 35.535] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 35.535] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 35.535] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 35.535] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 35.535] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 35.535] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 35.535] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 35.535] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 35.535] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 35.535] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 35.535] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 35.535] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.535] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input15/event14"
[ 35.535] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 35.535] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 35.535] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 35.535] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 35.535] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 35.535] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 35.535] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 35.535] (II) No input driver specified, ignoring this device.
[ 35.535] (II) This device may have been added with another device file.
[ 35.535] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 35.535] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 35.535] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 35.535] (**) ThinkPad Extra Buttons: always reports core events
[ 35.535] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 35.535] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 35.535] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 35.535] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 35.535] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event5"
[ 35.535] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 35.535] (**) Option "xkb_rules" "evdev"
[ 35.540] (EE) modeset(0): Failed to set CTM property: -22
[ 35.540] (EE) modeset(0): failed to set mode: No such file or directory
[ 37.281] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 51.538] (II) evdev: ThinkPad Extra Buttons: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: AT Raw Set 2 keyboard: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: Yubico YubiKey OTP+FIDO+CCID: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: Sleep Button: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: Video Bus: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.538] (II) evdev: Power Button: Close
[ 51.538] (II) UnloadModule: "evdev"
[ 51.539] (II) Server terminated successfully (0). Closing log file.
|
Any help would be greatly appreciated. |
|
| Back to top |
|
 |
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 1:29 pm Post subject: |
|
|
dmesg output:
| Quote: |
[ 0.000000] Linux version 6.6.13-gentoo (pontus@pontus-x230) (clang version 17.0.6, LLD 17.0.6) #11 SMP PREEMPT_DYNAMIC Sun Jan 28 22:16:15 UTC 2024
[ 0.000000] Command line: intel_iommu=on intel_iommu=igfx_off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfed4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 23061N6/23061N6, BIOS CBET4000 Heads-v0.2.0-1360-g305851a 01/01/1970
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.775 MHz processor
[ 0.000012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000018] last_pfn = 0x43d600 max_arch_pfn = 0x400000000
[ 0.000023] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
[ 0.000025] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000210] last_pfn = 0xbfed5 max_arch_pfn = 0x400000000
[ 0.000438] RAMDISK: [mem 0x43af45000-0x43b1fffff]
[ 0.000441] ACPI: Early table checksum verification disabled
[ 0.000443] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.000447] ACPI: XSDT 0x00000000BFEE70E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000452] ACPI: FACP 0x00000000BFEEABB0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000457] ACPI: DSDT 0x00000000BFEE7280 003927 (v02 COREv4 COREBOOT 20110725 INTL 20200717)
[ 0.000460] ACPI: FACS 0x00000000BFEE7240 000040
[ 0.000462] ACPI: FACS 0x00000000BFEE7240 000040
[ 0.000464] ACPI: SSDT 0x00000000BFEEACD0 002DE0 (v02 COREv4 COREBOOT 0000002A CORE 20200717)
[ 0.000467] ACPI: MCFG 0x00000000BFEEDAB0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000470] ACPI: TCPA 0x00000000BFEEDAF0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000472] ACPI: APIC 0x00000000BFEEDB30 00008C (v03 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000475] ACPI: DMAR 0x00000000BFEEDBC0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000478] ACPI: HPET 0x00000000BFEEDC80 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.000480] ACPI: Reserving FACP table memory at [mem 0xbfeeabb0-0xbfeeacc3]
[ 0.000481] ACPI: Reserving DSDT table memory at [mem 0xbfee7280-0xbfeeaba6]
[ 0.000482] ACPI: Reserving FACS table memory at [mem 0xbfee7240-0xbfee727f]
[ 0.000483] ACPI: Reserving FACS table memory at [mem 0xbfee7240-0xbfee727f]
[ 0.000484] ACPI: Reserving SSDT table memory at [mem 0xbfeeacd0-0xbfeedaaf]
[ 0.000484] ACPI: Reserving MCFG table memory at [mem 0xbfeedab0-0xbfeedaeb]
[ 0.000485] ACPI: Reserving TCPA table memory at [mem 0xbfeedaf0-0xbfeedb21]
[ 0.000486] ACPI: Reserving APIC table memory at [mem 0xbfeedb30-0xbfeedbbb]
[ 0.000487] ACPI: Reserving DMAR table memory at [mem 0xbfeedbc0-0xbfeedc7f]
[ 0.000487] ACPI: Reserving HPET table memory at [mem 0xbfeedc80-0xbfeedcb7]
[ 0.000509] No NUMA configuration found
[ 0.000510] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff]
[ 0.000513] NODE_DATA(0) allocated [mem 0x43d5f4000-0x43d5f7fff]
[ 0.000532] Zone ranges:
[ 0.000532] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000535] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000536] Normal [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.000537] Movable zone start for each node
[ 0.000538] Early memory node ranges
[ 0.000538] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000540] node 0: [mem 0x0000000000100000-0x00000000bfed4fff]
[ 0.000541] node 0: [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.000543] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff]
[ 0.000547] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000582] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.036720] On node 0, zone Normal: 299 pages in unavailable ranges
[ 0.036815] On node 0, zone Normal: 10752 pages in unavailable ranges
[ 0.036822] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[ 0.037035] ACPI: PM-Timer IO Port: 0x508
[ 0.037052] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.037055] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.037057] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.037061] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.037062] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.037066] TSC deadline timer available
[ 0.037067] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.037075] [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.037078] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.042302] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.042835] percpu: Embedded 66 pages/cpu s145896 r8192 d116248 u524288
[ 0.042839] pcpu-alloc: s145896 r8192 d116248 u524288 alloc=1*2097152
[ 0.042842] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ 0.042856] Kernel command line: intel_iommu=on intel_iommu=igfx_off
[ 0.042871] DMAR: IOMMU enabled
[ 0.042879] DMAR: Disable GFX device mapping
[ 0.042897] random: crng init done
[ 0.044614] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.045522] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.045617] Fallback order for Node 0: 0
[ 0.045621] Built 1 zonelists, mobility grouping on. Total pages: 4117633
[ 0.045622] Policy zone: Normal
[ 0.045630] mem auto-init: stack:all(zero), heap alloc:on, heap free:on
[ 0.045631] mem auto-init: clearing system memory may take some time...
[ 0.045637] software IO TLB: area num 8.
[ 1.914869] Memory: 16340808K/16732624K available (16384K kernel code, 1519K rwdata, 4220K rodata, 2184K init, 2384K bss, 391556K reserved, 0K cma-reserved)
[ 1.915633] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 1.915640] Kernel/User page tables isolation: enabled
[ 1.916090] Dynamic Preempt: voluntary
[ 1.916139] rcu: Preemptible hierarchical RCU implementation.
[ 1.916139] rcu: RCU event tracing is enabled.
[ 1.916140] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 1.916149] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
[ 1.916335] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 1.916400] Console: colour dummy device 80x25
[ 1.916402] printk: console [tty0] enabled
[ 1.916576] ACPI: Core revision 20230628
[ 1.916654] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 1.916673] APIC: Switch to symmetric I/O mode setup
[ 1.917104] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.921673] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113ed34eb3, max_idle_ns: 440795276582 ns
[ 1.921682] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.55 BogoMIPS (lpj=2294775)
[ 1.921707] CPU0: Thermal monitoring enabled (TM1)
[ 1.921728] process: using mwait in idle threads
[ 1.921733] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 1.921735] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 1.921740] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 1.921744] Spectre V2 : Mitigation: Retpolines
[ 1.921746] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 1.921749] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 1.921751] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 1.921754] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 1.921757] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 1.921760] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 1.921764] MDS: Mitigation: Clear CPU buffers
[ 1.921766] MMIO Stale Data: Unknown: No mitigations
[ 1.921768] SRBDS: Vulnerable: No microcode
[ 1.921774] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 1.921777] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 1.921780] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 1.921782] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 1.921785] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 1.931018] Freeing SMP alternatives memory: 44K
[ 1.931026] pid_max: default: 32768 minimum: 301
[ 1.931066] LSM: initializing lsm=capability,integrity
[ 1.931096] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.931101] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.931316] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 1.931447] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 1.931464] ... version: 3
[ 1.931465] ... bit width: 48
[ 1.931467] ... generic registers: 4
[ 1.931469] ... value mask: 0000ffffffffffff
[ 1.931471] ... max period: 00007fffffffffff
[ 1.931473] ... fixed-purpose events: 3
[ 1.931474] ... event mask: 000000070000000f
[ 1.931623] signal: max sigframe size: 1360
[ 1.931642] Estimated ratio of average max frequency by base frequency (times 1024): 1380
[ 1.931664] rcu: Hierarchical SRCU implementation.
[ 1.931666] rcu: Max phase no-delay instances is 400.
[ 1.931678] smp: Bringing up secondary CPUs ...
[ 1.931678] smpboot: x86: Booting SMP configuration:
[ 1.931678] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7
[ 1.935750] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 1.938689] smp: Brought up 1 node, 8 CPUs
[ 1.938693] smpboot: Max logical packages: 1
[ 1.938696] smpboot: Total of 8 processors activated (36716.40 BogoMIPS)
[ 1.940175] devtmpfs: initialized
[ 1.940175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 1.940175] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.940175] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 1.940175] audit: initializing netlink subsys (disabled)
[ 1.940175] audit: type=2000 audit(1706533468.023:1): state=initialized audit_enabled=0 res=1
[ 1.940729] thermal_sys: Registered thermal governor 'step_wise'
[ 1.940730] thermal_sys: Registered thermal governor 'user_space'
[ 1.940744] cpuidle: using governor menu
[ 1.940776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 1.940783] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry
[ 1.940792] PCI: Using configuration type 1 for base access
[ 1.940804] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 1.940972] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.940972] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 1.940972] cryptd: max_cpu_qlen set to 1000
[ 1.940972] ACPI: Added _OSI(Module Device)
[ 1.940972] ACPI: Added _OSI(Processor Device)
[ 1.940972] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.940972] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.943546] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 1.944065] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 1.944233] ACPI: EC: EC started
[ 1.944235] ACPI: EC: interrupt blocked
[ 1.944468] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.944472] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 1.944475] ACPI: Interpreter enabled
[ 1.944489] ACPI: PM: (supports S0 S3 S5)
[ 1.944491] ACPI: Using IOAPIC for interrupt routing
[ 1.944507] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.944511] PCI: Using E820 reservations for host bridge windows
[ 1.944617] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.947929] ACPI: \_TZ_.THM0.FPWR: New power resource
[ 1.948137] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.948146] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.948175] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
[ 1.948184] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 1.948329] PCI host bridge to bus 0000:00
[ 1.948333] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.948337] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.948340] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 1.948343] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xefffffff window]
[ 1.948347] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 1.948350] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.948368] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.948452] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.948461] pci 0000:00:02.0: reg 0x10: [mem 0xc3c00000-0xc3ffffff 64bit]
[ 1.948468] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.948473] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 1.948484] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.948548] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 1.948557] pci 0000:00:04.0: reg 0x10: [mem 0xc4030000-0xc4037fff 64bit]
[ 1.948633] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.948654] pci 0000:00:14.0: reg 0x10: [mem 0xc4020000-0xc402ffff 64bit]
[ 1.948722] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.948839] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.948919] pci 0000:00:16.0: reg 0x10: [mem 0xc4042000-0xc404200f 64bit]
[ 1.949238] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.949343] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 1.949359] pci 0000:00:19.0: reg 0x10: [mem 0xc4000000-0xc401ffff]
[ 1.949368] pci 0000:00:19.0: reg 0x14: [mem 0xc403c000-0xc403cfff]
[ 1.949378] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 1.949435] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.949491] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.949508] pci 0000:00:1a.0: reg 0x10: [mem 0xc403f000-0xc403f3ff]
[ 1.949589] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.949668] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.949688] pci 0000:00:1b.0: reg 0x10: [mem 0xc4038000-0xc403bfff 64bit]
[ 1.949763] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.949858] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.950012] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.950047] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 1.950051] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 1.950141] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 1.950292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.950325] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 1.950329] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 1.950419] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 1.950572] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.950604] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 1.950608] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 1.950697] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.950714] pci 0000:00:1d.0: reg 0x10: [mem 0xc4040000-0xc40403ff]
[ 1.950796] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.950874] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 1.951066] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.951080] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 1.951089] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 1.951098] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 1.951106] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 1.951115] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 1.951124] pci 0000:00:1f.2: reg 0x24: [mem 0xc403e000-0xc403e7ff]
[ 1.951164] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.951229] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.951247] pci 0000:00:1f.3: reg 0x10: [mem 0xc4041000-0xc40410ff 64bit]
[ 1.951269] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 1.951346] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 1.951367] pci 0000:00:1f.6: reg 0x10: [mem 0xc403d000-0xc403dfff 64bit]
[ 1.951583] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 1.951592] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 1.951647] pci 0000:01:00.0: reg 0x10: [mem 0xc2a00000-0xc2a000ff]
[ 1.951975] pci 0000:01:00.0: supports D1 D2
[ 1.951978] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.952214] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.952224] pci 0000:00:1c.0: bridge window [mem 0xc2a00000-0xc2afffff]
[ 1.952404] pci 0000:02:00.0: [8086:2725] type 00 class 0x028000
[ 1.952515] pci 0000:02:00.0: reg 0x10: [mem 0xc2b00000-0xc2b03fff 64bit]
[ 1.953090] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.953525] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.953536] pci 0000:00:1c.1: bridge window [mem 0xc2b00000-0xc2bfffff]
[ 1.953600] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.953606] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.953611] pci 0000:00:1c.2: bridge window [mem 0xc3400000-0xc3bfffff]
[ 1.953621] pci 0000:00:1c.2: bridge window [mem 0xc2c00000-0xc33fffff 64bit pref]
[ 1.953777] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 1.953780] ACPI: PCI: Interrupt link LNKA disabled
[ 1.953817] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 1.953819] ACPI: PCI: Interrupt link LNKB disabled
[ 1.953854] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 1.953857] ACPI: PCI: Interrupt link LNKC disabled
[ 1.953892] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 1.953895] ACPI: PCI: Interrupt link LNKD disabled
[ 1.953929] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 1.953931] ACPI: PCI: Interrupt link LNKE disabled
[ 1.953966] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 1.953968] ACPI: PCI: Interrupt link LNKF disabled
[ 1.954003] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 1.954005] ACPI: PCI: Interrupt link LNKG disabled
[ 1.954040] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 1.954042] ACPI: PCI: Interrupt link LNKH disabled
[ 1.954657] ACPI: EC: interrupt unblocked
[ 1.954660] ACPI: EC: event unblocked
[ 1.954663] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.954665] ACPI: EC: GPE=0x11
[ 1.954668] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 1.954671] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 1.954724] iommu: Default domain type: Translated
[ 1.954724] iommu: DMA domain TLB invalidation policy: strict mode
[ 1.954726] SCSI subsystem initialized
[ 1.954735] libata version 3.00 loaded.
[ 1.954736] ACPI: bus type USB registered
[ 1.954749] usbcore: registered new interface driver usbfs
[ 1.954756] usbcore: registered new interface driver hub
[ 1.954765] usbcore: registered new device driver usb
[ 1.954779] pps_core: LinuxPPS API ver. 1 registered
[ 1.954782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.954818] Advanced Linux Sound Architecture Driver Initialized.
[ 1.954948] PCI: Using ACPI for IRQ routing
[ 1.956494] PCI: pci_cache_line_size set to 64 bytes
[ 1.956569] e820: reserve RAM buffer [mem 0xbfed5000-0xbfffffff]
[ 1.956572] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff]
[ 1.956584] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.956584] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.956584] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.956584] vgaarb: loaded
[ 1.956584] clocksource: Switched to clocksource tsc-early
[ 1.956584] pnp: PnP ACPI init
[ 1.956584] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.956584] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.956584] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.956584] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.956584] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 1.956584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.956584] system 00:02: [io 0x0500-0x057f] has been reserved
[ 1.956584] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 1.956584] pnp: PnP ACPI: found 7 devices
[ 1.961971] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.962003] NET: Registered PF_INET protocol family
[ 1.962028] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.964593] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.964610] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.964622] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.964773] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 1.965059] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.965092] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.965122] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.965183] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.965198] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.965208] pci 0000:00:1c.0: bridge window [mem 0xc2a00000-0xc2afffff]
[ 1.965221] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.965229] pci 0000:00:1c.1: bridge window [mem 0xc2b00000-0xc2bfffff]
[ 1.965242] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.965246] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.965254] pci 0000:00:1c.2: bridge window [mem 0xc3400000-0xc3bfffff]
[ 1.965260] pci 0000:00:1c.2: bridge window [mem 0xc2c00000-0xc33fffff 64bit pref]
[ 1.965270] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.965273] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.965276] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[ 1.965279] pci_bus 0000:00: resource 7 [mem 0xc2a00000-0xefffffff window]
[ 1.965281] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 1.965284] pci_bus 0000:01: resource 1 [mem 0xc2a00000-0xc2afffff]
[ 1.965287] pci_bus 0000:02: resource 1 [mem 0xc2b00000-0xc2bfffff]
[ 1.965290] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.965292] pci_bus 0000:03: resource 1 [mem 0xc3400000-0xc3bfffff]
[ 1.965294] pci_bus 0000:03: resource 2 [mem 0xc2c00000-0xc33fffff 64bit pref]
[ 1.965803] PCI: CLS 64 bytes, default 64
[ 1.965812] DMAR: Host address width 36
[ 1.965815] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 1.965824] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 1.965830] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 1.965838] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 1.965842] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff
[ 1.965851] DMAR: No ATSR found
[ 1.965852] DMAR: No SATC found
[ 1.965857] DMAR: dmar1: Using Queued invalidation
[ 1.965859] DMAR: Translation was enabled for dmar1 but we are not in kdump mode
[ 1.965893] Unpacking initramfs...
[ 1.965924] pci 0000:00:00.0: Adding to iommu group 0
[ 1.965935] pci 0000:00:04.0: Adding to iommu group 1
[ 1.965945] pci 0000:00:14.0: Adding to iommu group 2
[ 1.965958] pci 0000:00:16.0: Adding to iommu group 3
[ 1.965967] pci 0000:00:19.0: Adding to iommu group 4
[ 1.965976] pci 0000:00:1a.0: Adding to iommu group 5
[ 1.965985] pci 0000:00:1b.0: Adding to iommu group 6
[ 1.965995] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.966004] pci 0000:00:1c.1: Adding to iommu group 8
[ 1.966013] pci 0000:00:1c.2: Adding to iommu group 9
[ 1.966022] pci 0000:00:1d.0: Adding to iommu group 10
[ 1.966043] pci 0000:00:1f.0: Adding to iommu group 11
[ 1.966052] pci 0000:00:1f.2: Adding to iommu group 11
[ 1.966062] pci 0000:00:1f.3: Adding to iommu group 11
[ 1.966071] pci 0000:00:1f.6: Adding to iommu group 11
[ 1.966083] pci 0000:01:00.0: Adding to iommu group 12
[ 1.966093] pci 0000:02:00.0: Adding to iommu group 13
[ 1.966664] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.966668] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.966670] software IO TLB: mapped [mem 0x00000000bbed5000-0x00000000bfed5000] (64MB)
[ 1.969885] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 1.969890] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.969892] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.969894] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 1.971098] Initialise system trusted keyrings
[ 1.971127] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.971231] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.979140] NET: Registered PF_ALG protocol family
[ 1.979145] Key type asymmetric registered
[ 1.979148] Asymmetric key parser 'x509' registered
[ 1.979160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.979193] io scheduler mq-deadline registered
[ 1.979196] io scheduler kyber registered
[ 1.979205] io scheduler bfq registered
[ 1.979544] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 1.979766] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[ 1.979978] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[ 1.980072] vesafb: mode is 1366x768x32, linelength=5504, pages=1032
[ 1.980075] vesafb: scrolling: redraw
[ 1.980077] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.980088] vesafb: framebuffer at 0xd0064000, mapped to 0x00000000a5156ab0, using 4160k, total 4160k
[ 1.981089] Console: switching to colour frame buffer device 170x48
[ 1.981942] fb0: VESA VGA frame buffer device
[ 1.982752] ACPI: AC: AC Adapter [AC] (off-line)
[ 1.982809] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input0
[ 1.982857] ACPI: button: Sleep Button [SLPB]
[ 1.982891] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.982928] ACPI: button: Lid Switch [LID]
[ 1.982964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.983002] ACPI: button: Power Button [PWRF]
[ 1.984954] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.984966] ACPI: thermal: Thermal Zone [THM0] (30 C)
[ 1.985673] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.985691] ACPI: thermal: Thermal Zone [THM1] (27 C)
[ 1.985891] Non-volatile memory driver v1.3
[ 1.985931] Linux agpgart interface v0.103
[ 1.988728] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 7
[ 1.994149] ACPI: battery: Slot [BAT0] (battery present)
[ 1.994311] ACPI: battery: Slot [BAT1] (battery absent)
[ 2.001075] Freeing initrd memory: 2796K
[ 2.049097] ACPI: bus type drm_connector registered
[ 2.050000] Console: switching to colour dummy device 80x25
[ 2.050037] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.092319] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[ 2.092455] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.092557] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.092613] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 2.099221] acpi device:2f: registered as cooling_device9
[ 2.100638] loop: module loaded
[ 2.100694] ahci 0000:00:1f.2: version 3.0
[ 2.100855] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.111779] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 2.111805] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 2.112401] scsi host0: ahci
[ 2.112562] scsi host1: ahci
[ 2.112696] scsi host2: ahci
[ 2.112851] scsi host3: ahci
[ 2.112996] scsi host4: ahci
[ 2.113142] scsi host5: ahci
[ 2.113176] ata1: SATA max UDMA/133 abar m2048@0xc403e000 port 0xc403e100 irq 29
[ 2.113182] ata2: SATA max UDMA/133 abar m2048@0xc403e000 port 0xc403e180 irq 29
[ 2.113186] ata3: SATA max UDMA/133 abar m2048@0xc403e000 port 0xc403e200 irq 29
[ 2.113189] ata4: DUMMY
[ 2.113191] ata5: DUMMY
[ 2.113192] ata6: DUMMY
[ 2.113243] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 2.113248] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 2.113257] e1000e: Intel(R) PRO/1000 Network Driver
[ 2.113259] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.113429] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.197552] fbcon: i915drmfb (fb0) is primary device
[ 2.198629] Console: switching to colour frame buffer device 170x48
[ 2.199502] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.315297] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:de:ad:c0:ff:ee
[ 2.315323] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.315377] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 2.315423] usbcore: registered new interface driver cdc_ether
[ 2.315443] usbcore: registered new interface driver cdc_ncm
[ 2.315457] usbcore: registered new interface driver cdc_mbim
[ 2.315470] usbcore: registered new interface driver r8153_ecm
[ 2.315910] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.316037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.317165] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 2.317292] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.317293] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.317386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.317388] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.317403] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.317428] ehci-pci 0000:00:1a.0: debug port 2
[ 2.317534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.317555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.317569] usb usb1: Product: xHCI Host Controller
[ 2.317578] usb usb1: Manufacturer: Linux 6.6.13-gentoo xhci-hcd
[ 2.317589] usb usb1: SerialNumber: 0000:00:14.0
[ 2.318170] hub 1-0:1.0: USB hub found
[ 2.318612] hub 1-0:1.0: 4 ports detected
[ 2.319352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.319786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.320211] usb usb2: Product: xHCI Host Controller
[ 2.320637] usb usb2: Manufacturer: Linux 6.6.13-gentoo xhci-hcd
[ 2.321072] usb usb2: SerialNumber: 0000:00:14.0
[ 2.321380] ehci-pci 0000:00:1a.0: irq 19, io mem 0xc403f000
[ 2.321607] hub 2-0:1.0: USB hub found
[ 2.322358] hub 2-0:1.0: 4 ports detected
[ 2.322984] usbcore: registered new interface driver cdc_acm
[ 2.323392] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.323807] usbcore: registered new interface driver cdc_wdm
[ 2.324215] usbcore: registered new interface driver usb-storage
[ 2.324634] usbcore: registered new interface driver ch341
[ 2.325062] usbserial: USB Serial support registered for ch341-uart
[ 2.325495] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.327342] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.327777] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.328355] mousedev: PS/2 mouse device common for all mice
[ 2.328698] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.329122] rtc_cmos 00:03: RTC can wake from S4
[ 2.329289] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.329852] rtc_cmos 00:03: registered as rtc0
[ 2.330009] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.330428] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.330813] usb usb3: Product: EHCI Host Controller
[ 2.330993] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.331402] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.331618] usb usb3: Manufacturer: Linux 6.6.13-gentoo ehci_hcd
[ 2.331619] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.332175] i2c i2c-9: 2/2 memory slots populated (from DMI)
[ 2.332584] hub 3-0:1.0: USB hub found
[ 2.333191] i2c i2c-9: Successfully instantiated SPD at 0x50
[ 2.333358] hub 3-0:1.0: 3 ports detected
[ 2.334199] i2c i2c-9: Successfully instantiated SPD at 0x51
[ 2.334855] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.335243] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 2.335470] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.336050] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 2.336316] ehci-pci 0000:00:1d.0: debug port 2
[ 2.336743] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 2.338033] device-mapper: multipath service-time: version 0.3.0 loaded
[ 2.338477] intel_pstate: Intel P-state driver initializing
[ 2.339278] sdhci: Secure Digital Host Controller Interface driver
[ 2.340305] sdhci: Copyright(c) Pierre Ossman
[ 2.340926] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 2.340936] hid: raw HID events driver (C) Jiri Kosina
[ 2.341093] ehci-pci 0000:00:1d.0: irq 18, io mem 0xc4040000
[ 2.341863] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.342093] usbcore: registered new interface driver usbhid
[ 2.342810] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 2.343145] usbhid: USB HID core driver
[ 2.344706] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 2.345141] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.345576] thinkpad_acpi: ThinkPad BIOS CBET4000 Heads-v0.2.0-1360-g305851a, EC G2HT35WW-3.22
[ 2.346015] thinkpad_acpi: Lenovo ThinkPad X230, model 23061N6
[ 2.347220] thinkpad_acpi: radio switch found; radios are enabled
[ 2.347796] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.347813] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 2.348308] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.348691] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.349128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.349589] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.350058] usb usb4: Product: EHCI Host Controller
[ 2.350980] usb usb4: Manufacturer: Linux 6.6.13-gentoo ehci_hcd
[ 2.351487] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.352273] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.352361] hub 4-0:1.0: USB hub found
[ 2.353231] hub 4-0:1.0: 3 ports detected
[ 2.353254] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 2.356287] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.356852] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.359372] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1)
[ 2.359855] ACPI: battery: new extension: ThinkPad Battery Extension
[ 2.360412] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 2.362037] Initializing XFRM netlink socket
[ 2.362764] NET: Registered PF_PACKET protocol family
[ 2.363354] Bridge firewalling registered
[ 2.363934] Key type dns_resolver registered
[ 2.374747] microcode: Microcode Update Driver: v2.2.
[ 2.374751] IPI shorthand broadcast: enabled
[ 2.375669] AVX version of gcm_enc/dec engaged.
[ 2.376253] AES CTR mode by8 optimization enabled
[ 2.378655] sched_clock: Marking stable (2377366041, 313273)->(2388911570, -11232256)
[ 2.379248] registered taskstats version 1
[ 2.379429] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffb6912e80)
[ 2.379782] Loading compiled-in X.509 certificates
[ 2.381872] Loaded X.509 cert 'Build time autogenerated kernel key: 6e53dc4b377fc29a6d9cfce8a4d8ba834cb44e59'
[ 2.386257] Key type trusted registered
[ 2.386992] Key type encrypted registered
[ 2.387533] printk: console [netcon0] enabled
[ 2.388022] netconsole: network logging started
[ 2.388558] clk: Disabling unused clocks
[ 2.389032] ALSA device list:
[ 2.389504] #29: ThinkPad Console Audio Control at EC reg 0x30, fw G2HT35WW-3.22
[ 2.391262] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.391724] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.392174] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 2.392622] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.393064] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.393501] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.393942] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 2.394376] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.404414] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.404898] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.405369] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.405870] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.406367] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.406869] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.407348] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.421767] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.422692] ata1.00: supports DRM functions and may not be fully accessible
[ 2.423226] ata1.00: ATA-11: Samsung SSD 870 EVO 500GB, SVT02B6Q, max UDMA/133
[ 2.424439] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.427957] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 2.428831] ata1.00: supports DRM functions and may not be fully accessible
[ 2.432858] ata1.00: configured for UDMA/133
[ 2.433528] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 870 2B6Q PQ: 0 ANSI: 5
[ 2.434244] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.434309] ata1.00: Enabling discard_zeroes_data
[ 2.435126] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.435590] sd 0:0:0:0: [sda] Write Protect is off
[ 2.436031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.436116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.436627] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2.437282] ata1.00: Enabling discard_zeroes_data
[ 2.439176] sda: sda1 sda2
[ 2.439731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.574722] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.590765] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.703453] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.704145] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.705262] hub 3-1:1.0: USB hub found
[ 2.706211] hub 3-1:1.0: 6 ports detected
[ 2.720453] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.720928] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.721705] hub 4-1:1.0: USB hub found
[ 2.722309] hub 4-1:1.0: 8 ports detected
[ 2.746769] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.801194] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2.832777] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.894057] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1777005
[ 2.894578] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.934128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.972400] tsc: Refined TSC clocksource calibration: 2294.790 MHz
[ 2.973510] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113fb5d4ae, max_idle_ns: 440795242406 ns
[ 2.974686] clocksource: Switched to clocksource tsc
[ 2.980373] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.996373] usb 4-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.058652] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.061126] Freeing unused kernel image (initmem) memory: 2184K
[ 3.061905] usb 3-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00
[ 3.063348] Write protecting the kernel read-only data: 22528k
[ 3.064525] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.066662] Freeing unused kernel image (rodata/data gap) memory: 1924K
[ 3.067901] Run /init as init process
[ 3.069019] with arguments:
[ 3.069021] /init
[ 3.069023] with environment:
[ 3.069025] HOME=/
[ 3.069027] TERM=linux
[ 3.078149] usb 4-1.4: config 1 has an invalid interface number: 8 but max is 3
[ 3.079044] usb 4-1.4: config 1 has no interface number 1
[ 3.080895] usb 4-1.4: config 2 has an invalid interface number: 12 but max is 1
[ 3.081583] usb 4-1.4: config 2 has an invalid interface number: 13 but max is 1
[ 3.082215] usb 4-1.4: config 2 has an invalid interface number: 13 but max is 1
[ 3.082842] usb 4-1.4: config 2 has no interface number 0
[ 3.083471] usb 4-1.4: config 2 has no interface number 1
[ 3.085639] usb 4-1.4: New USB device found, idVendor=1199, idProduct=68a2, bcdDevice= 0.06
[ 3.086246] usb 4-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 3.086845] usb 4-1.4: Product: MC7710
[ 3.087430] usb 4-1.4: Manufacturer: Sierra Wireless, Incorporated
[ 3.130328] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[ 3.226097] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20
[ 3.226854] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.227576] usb 3-1.6: Product: Integrated Camera
[ 3.228297] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.482741] usb 4-1.4: can't set config #2, error -71
[ 3.621388] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.623211] usb 4-1.4: USB disconnect, device number 3
[ 3.835125] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
[ 5.745671] EXT4-fs (dm-2): mounted filesystem fc065a49-be2c-4113-9827-534f54fef5b1 ro with ordered data mode. Quota mode: disabled.
[ 6.614380] udevd[686]: starting version 3.2.14
[ 6.631468] udevd[686]: starting eudev-3.2.14
[ 6.707080] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 6.734855] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.736659] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.736830] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.736842] Loading firmware: regulatory.db
[ 6.740280] Loading firmware: regulatory.db.p7s
[ 6.749098] Intel(R) Wireless WiFi driver for Linux
[ 6.750472] iwlwifi 0000:02:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[ 6.750493] iwlwifi 0000:02:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[ 6.750550] Loading firmware: iwlwifi-ty-a0-gf-a0-83.ucode
[ 6.750569] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-83.ucode failed with error -2
[ 6.750574] Loading firmware: iwlwifi-ty-a0-gf-a0-82.ucode
[ 6.750583] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-82.ucode failed with error -2
[ 6.750586] Loading firmware: iwlwifi-ty-a0-gf-a0-81.ucode
[ 6.750594] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-81.ucode failed with error -2
[ 6.750597] Loading firmware: iwlwifi-ty-a0-gf-a0-80.ucode
[ 6.750606] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-80.ucode failed with error -2
[ 6.750608] Loading firmware: iwlwifi-ty-a0-gf-a0-79.ucode
[ 6.750616] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-79.ucode failed with error -2
[ 6.750619] Loading firmware: iwlwifi-ty-a0-gf-a0-78.ucode
[ 6.750626] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-78.ucode failed with error -2
[ 6.750629] Loading firmware: iwlwifi-ty-a0-gf-a0-77.ucode
[ 6.750637] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-77.ucode failed with error -2
[ 6.750639] Loading firmware: iwlwifi-ty-a0-gf-a0-76.ucode
[ 6.750646] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-76.ucode failed with error -2
[ 6.750649] Loading firmware: iwlwifi-ty-a0-gf-a0-75.ucode
[ 6.751375] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-75.ucode failed with error -2
[ 6.751381] Loading firmware: iwlwifi-ty-a0-gf-a0-74.ucode
[ 6.751392] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-74.ucode failed with error -2
[ 6.751395] Loading firmware: iwlwifi-ty-a0-gf-a0-73.ucode
[ 6.751403] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-73.ucode failed with error -2
[ 6.751406] Loading firmware: iwlwifi-ty-a0-gf-a0-72.ucode
[ 6.756491] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver
[ 6.756514] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36
[ 6.756874] Loading firmware: iwl-debug-yoyo.bin
[ 6.756891] iwlwifi 0000:02:00.0: loaded firmware version 72.a764baac.0 ty-a0-gf-a0-72.ucode op_mode iwlmvm
[ 6.795706] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
[ 6.795774] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 6.969210] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[ 6.969231] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 6.969261] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90
[ 6.969281] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 6.969287] Loading firmware: iwlwifi-ty-a0-gf-a0.pnvm
[ 6.970360] iwlwifi 0000:02:00.0: loaded PNVM version e28bb9d7
[ 6.985744] iwlwifi 0000:02:00.0: Detected RF GF, rfid=0x10d000
[ 7.056127] iwlwifi 0000:02:00.0: base HW address: a4:f9:33:a3:b2:54
[ 7.074152] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.594994] EXT4-fs (dm-2): re-mounted fc065a49-be2c-4113-9827-534f54fef5b1 r/w. Quota mode: disabled.
[ 7.616473] EXT4-fs (dm-2): re-mounted fc065a49-be2c-4113-9827-534f54fef5b1 r/w. Quota mode: disabled.
[ 7.759361] Adding 4194300k swap on /dev/dm-1. Priority:-2 extents:1 across:4194300k SS
[ 7.796332] usb 4-1.4: new high-speed USB device number 4 using ehci-pci
[ 7.877083] usb 4-1.4: config 1 has an invalid interface number: 8 but max is 3
[ 7.877091] usb 4-1.4: config 1 has no interface number 1
[ 7.878858] usb 4-1.4: config 2 has an invalid interface number: 12 but max is 1
[ 7.878868] usb 4-1.4: config 2 has an invalid interface number: 13 but max is 1
[ 7.878872] usb 4-1.4: config 2 has an invalid interface number: 13 but max is 1
[ 7.878875] usb 4-1.4: config 2 has no interface number 0
[ 7.878878] usb 4-1.4: config 2 has no interface number 1
[ 7.880475] usb 4-1.4: New USB device found, idVendor=1199, idProduct=68a2, bcdDevice= 0.06
[ 7.880487] usb 4-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 7.880492] usb 4-1.4: Product: MC7710
[ 7.880495] usb 4-1.4: Manufacturer: Sierra Wireless, Incorporated
[ 7.900229] cdc_mbim 4-1.4:2.12: cdc-wdm0: USB WDM device
[ 7.900455] cdc_mbim 4-1.4:2.12 wwan0: register 'cdc_mbim' at usb-0000:00:1d.0-1.4, CDC MBIM, 06:f7:49:8d:c6:e8
[ 9.772365] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[ 9.772399] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 9.772413] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90
[ 9.772441] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 13.536469] wlp2s0: authenticate with a2:b5:3c:11:c3:e6
[ 13.542180] wlp2s0: send auth to a2:b5:3c:11:c3:e6 (try 1/3)
[ 13.590520] wlp2s0: authenticated
[ 13.591316] wlp2s0: associate with a2:b5:3c:11:c3:e6 (try 1/3)
[ 13.594005] wlp2s0: RX AssocResp from a2:b5:3c:11:c3:e6 (capab=0x1011 status=0 aid=4)
[ 13.602560] wlp2s0: associated
[ 13.691170] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by a2:b5:3c:11:c3:e6
[ 14.838369] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 14.966557] usb 1-2: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 5.27
[ 14.966573] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.966578] usb 1-2: Product: YubiKey OTP+FIDO+CCID
[ 14.966582] usb 1-2: Manufacturer: Yubico
[ 14.968781] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1050:0407.0001/input/input16
[ 15.021021] hid-generic 0003:1050:0407.0001: input,hidraw0: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:14.0-2/input0
[ 15.022333] hid-generic 0003:1050:0407.0002: hiddev96,hidraw1: USB HID v1.10 Device [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:00:14.0-2/input1
|
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 2:57 pm Post subject: |
|
|
pbramberg,
Welcome to Gentoo.
Please use wgetpaste to post large logs or config files. The forum silently truncates posts to 64kb.
On gentoo, by default, startx starts the X server, finds nothing to do and exits.
That's what your log shows.
How did you configure startx to run i3 ?
| Quote: | | VIDEO_CARDS is set to "Intel" |
that's correct.
Xorg is using the modesetting driver, which is correct too.
The automatic detection shows
| Code: | [ 34.827] (==) Matched intel as autoconfigured driver 0
[ 34.827] (==) Matched modesetting as autoconfigured driver 1
[ 34.827] (==) Matched fbdev as autoconfigured driver 2
[ 34.827] (==) Matched vesa as autoconfigured driver 3
[ 34.827] (==) Assigned the driver to the xf86ConfigLayout
[ 34.827] (II) LoadModule: "intel"
[ 34.827] (WW) Warning, couldn't open module intel
[ 34.827] (EE) Failed to load module "intel" (module does not exist, 0) |
Setting intel is VIDEO_CARDS should have installed x886-video-intel which is not found, so the modsetting driver that your really want to use is in use as second choice.
musl lacks a lot of features to make it compatible with glibc. That's a deliberate feature, not a bug. I'm not sure if that matters with Xorg and i3
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
grknight
Retired Dev
Joined: 20 Feb 2015
Posts: 1660
|
| Posted: Mon Jan 29, 2024 3:34 pm Post subject: |
|
|
| NeddySeagoon wrote: | | Setting intel is VIDEO_CARDS should have installed x886-video-intel which is not found, so the modsetting driver that your really want to use is in use as second choice. |
This is no longer the case but is the desired effect. That package should not be installed. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 3:42 pm Post subject: |
|
|
Thank you, NeddySeagoon. I will use wgetpaste in the future.
According to the Gentoo wiki (https://wiki.gentoo.org/wiki/Intel#X_drivers) it is normal that the modesetting driver is used but I would be happy with xf86-video-intel if I could figure out why it segfaults.
I use "exec i3" in .xinitrc to start i3 but I have also tried to launch it with "startx /usr/bin/i3" with the same results. Here is a log from my attempt to do that: https://bpa.st/JIPRO
I have to "killall i3" from a different tty to close out of what looks like an empty and unusable tty (which is what I get when I run startx). To me it looks as if some problem occurs at row 380-381 of that paste:
| Quote: |
[ 9019.494] (EE) modeset(0): Failed to set CTM property: -22
[ 9019.494] (EE) modeset(0): failed to set mode: No such file or directory
|
What is CTM property: -22 and what file is it searching for?
Thank you again. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 4:36 pm Post subject: |
|
|
pbramberg,
Lets separate out Xorg problems from i3 problems with a small test.
Move your ~/.xinitrc file so that it is not found. Keep it for later.
| Code: | | emerge -1av twm xterm xclock |
That's the defaults that startx will try to use.
-1 means --oneshot. Do not add anything to your world file.
If all is well, startx will start three xterms and xclock all wrapped up in twm.
To operate twm, you need to know that it only uses the primary mouse button.
If that works, Xorg is OK and its an ~/.xinitrc or i3 configuration issue.
I think | Code: | | [ 9019.494] (EE) modeset(0): Failed to set CTM property: -22 |
is a colour management thing.
Its not a fatal error or the log would have stopped about there.
xf86-video-intel is depreciated and best not used.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 5:30 pm Post subject: |
|
|
Thank you again, NeedySeagoon.
I tried that and also tried remerging xorg-server and mesa (not that I know why that would help).
The symptoms are the same except for the tty being filled with repeated "open ttydev: I/O error" after I have killed X (this time "killall X" instead of i3) from another tty. Here is the Xorg log: https://bpa.st/UAECE |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 5:45 pm Post subject: |
|
|
pbramberg,
That's useful | Code: | | open ttydev: I/O error |
The Xorg.0.log may say something about opening a tty ... operation not permitted.
Xorg needs to do its setup as root.
In the old days Xorg was set suid, so it ran as root for everyone. That still works.
The modern way is to use some other tool to do the root setup, then Xorg runs as your normal user.
Do you want the complexity and bugs that go with 'some other tool' or do you want to use Xorg with suid?
'some other tool' means systemd or elogind. If you use OpenRC ensure that elogind is started before your run startx.
Hmm x11-base/xorg-server has USE=suid and USE=elongind you need one of those set.
DO NOT put suid into make.conf. Set it on a per package basis if that the way you choose to go.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 5:53 pm Post subject: |
|
|
| Thank you for that, NeedySeagoon. This occurs when I try to run Xorg as root (only for testing, I am aware of the risks) so I don't think it's a permissions issue. Sorry for not being clearer. I'm specifically avoiding 'some other tool' on this system so I will set suid once I have it working as root. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 6:14 pm Post subject: |
|
|
pbramberg,
Please pastebin /var/log/Xorg.0.log.
That's | Code: | | wgetpaste /var/log/Xorg.0.log |
Roots Xorg log is always there.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 6:20 pm Post subject: |
|
|
NeedySeagoon,
Here's root's Xorg log: https://bpa.st/ZG5Y2
Thank you |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 7:12 pm Post subject: |
|
|
pbramberg,
| Code: | [ 18819.442] (II) modeset(0): Using spanning desktop for initial modes
[ 18819.442] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 18819.442] (II) modeset(0): Output DP-2 using initial mode 1920x1080 +1366+0
...
[ 18819.576] (EE) modeset(0): failed to set mode: No such file or directory
[ 18822.480] (II) AIGLX: Suspending AIGLX clients for VT switch |
You have two displays connected. I think that error means that Xorg tried to set a mode and failed, then it shut down gracefully.
Output LVDS-1 is a laptop internal display.
Output DP-2 is an external display.. Shut down, disconnect the external display and test again.
Multi display setups often require .conf fragments to get to work properly.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 7:40 pm Post subject: |
|
|
| Thank you for your patience. The same thing happens with the external display disconnected. Here is the log (running as root): https://bpa.st/COB5Q |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Mon Jan 29, 2024 9:12 pm Post subject: |
|
|
pbramberg
Have a look at /usr/src/linux/Documentation/admin-guide/kernel-parameters.txt
You log says | Code: | | [ 23611.050] Kernel command line: intel_iommu=on intel_iommu=igfx_off |
I don't think multiple values for intel_iommu= are useful.
Try removing them both.
Why are they there?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
pbramberg
n00b
Joined: 29 Jan 2024
Posts: 9
|
| Posted: Mon Jan 29, 2024 10:22 pm Post subject: |
|
|
| Thank you so much! That solved it and I feel kind of silly now. Those parameters must have been left behind when I migrated to Gentoo (I experimented with GPU passthrough). |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54253
Location: 56N 3W
|
| Posted: Tue Jan 30, 2024 10:41 am Post subject: |
|
|
pbramberg,
Its not silly if you learn from it.
It's been a learning experience for me, so its not wasted, on me anyway.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
