| View previous topic :: View next topic |
| Author |
Message |
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
 Posted: Sun Jan 21, 2024 3:24 am Post subject: [SOLVED]Xorg configuration Nvidia |
 |
|
Keep getting error in posting, please see below posts thank you.
[SOLVED] Had not configured my fstab or installed grub correctly, I wasn't using the correct kernel hence Nvidia card not working 
Last edited by nzPenguin on Wed Jan 31, 2024 10:51 pm; edited 3 times in total |
|
| Back to top |
|
 |
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 3:29 am Post subject: |
|
|
Hello Gentoo community,
I knew my X wasn't using the correct display driver but now I want to use my second monitor I'm forced to fix it.
I have been following the documentation found here: https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers - trying both the distribution kernel instructions and manually compiled kernel instructions neither instructions are working for me.
I have been following the following documentation as my system has dual GPU Intel/Nvidia: https://wiki.gentoo.org/wiki/NVIDIA/Optimus - and have also tried following the official Nvidia documentation found here: https://us.download.nvidia.com/XFree86/Linux-x86_64/535.154.05/README/editxconfig.html
Also I have been following the Gentoo Xorg/Multiple monitor documentation: https://wiki.gentoo.org/wiki/Xorg/Multiple_monitors
My system seems to detect both the GPU's but X can't find them, and then fails to boot so I suspect I have a configuration issue.
Please see below is my attempt at providing as much relevant information as possible, where possible I have tried to format the information so that is easy to read but I do apologise for the wall of text.
Adding the following as described in Multiple Monitor documentation /etc/X11/xorg.conf.d/50-video.conf causes X to not start and it needs to be remove:
| Code: |
Section "Device"
Identifier "Device0"
Option "Monitor-DVI2" "DVI"
Option "Monitor-DP1" "DP"
Driver "nvidia"
EndSection
|
Or adding a single GPU as described here https://wiki.gentoo.org/wiki/NVIDIA/nvidia-drivers to a conf in directory /etc/X11/xorg.conf.d/ causes X to not start and needs removal:
| Code: |
Section "Device"
Identifier "nvidia"
Driver "nvidia"
EndSection
|
nvidia-xconfig --prime output:
| Code: |
nvidia-xconfig --prime
Using X configuration file: "/etc/X11/xorg.conf".
ERROR: Unable to find any GPUs in the system. <===== Seems bad.
Backed up file '/etc/X11/xorg.conf' as
'/etc/X11/xorg.conf.nvidia-xconfig-original'
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
|
My /etc/portage/make.conf:
| Code: |
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
COMMON_FLAGS="-O2 -pipe -march=alderlake"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
MAKEOPTS="-j16"
USE="X suid elogind -systemd dbus icu hddtemp lm-sensors non-root qt5 xinerama dist-kernel nvidia"
# NVIDIA CARDS
VIDEO_CARDS="nvidia"
# For input devices
INPUT_DEVICES="libinput synaptics"
# NOTE: This stage was built with the bindist Use flag enabled
ACCEPT_LICENSE="-* @FREE x11-drivers/nvidia-drivers-535.146.02 NVIDIA-r2"
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C.utf8
GRUB_PLATFORMS="efi-64"
|
modprobe error output:
| Code: |
modprobe nvidia
modprobe: ERROR: could not find module by name='nvidia'
modprobe: ERROR: could not insert 'nvidia': Unknown symbol in module, or unknown parameter (see dmesg)
|
glxinfo | grep direct output and glxgears:
| Code: |
sam@dev ~ $ glxinfo | grep direct
direct rendering: Yes
GL_AMD_multi_draw_indirect, GL_AMD_pinned_memory,
GL_ARB_derivative_control, GL_ARB_direct_state_access,
GL_ARB_draw_elements_base_vertex, GL_ARB_draw_indirect,
GL_ARB_indirect_parameters, GL_ARB_instanced_arrays,
GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multi_draw_indirect,
GL_AMD_draw_buffers_blend, GL_AMD_multi_draw_indirect,
GL_ARB_direct_state_access, GL_ARB_draw_buffers,
GL_ARB_draw_indirect, GL_ARB_draw_instanced, GL_ARB_enhanced_layouts,
GL_ARB_indirect_parameters, GL_ARB_instanced_arrays,
GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multi_draw_indirect,
GL_EXT_direct_state_access, GL_EXT_draw_buffers2, GL_EXT_draw_instanced,
sam@dev ~ $ glxgears
22122 frames in 5.0 seconds = 4424.384 FPS
22333 frames in 5.0 seconds = 4466.553 FPS
22309 frames in 5.0 seconds = 4461.653 FPS
22319 frames in 5.0 seconds = 4463.652 FPS
22352 frames in 5.0 seconds = 4470.288 FPS
|
neofetch output:
| Code: |
-/oyddmdhs+:. sam@dev
-odNMMMMMMMMNNmhy+-` -------
-yNMMMMMMMMMMMNNNmmdhy+- OS: Gentoo Linux x86_64
`omMMMMMMMMMMMMNmdmmmmddhhy/` Host: G5 KE
omMMMMMMMMMMMNhhyyyohmdddhhhdo` Kernel: 6.1.69-gentoo-dist
.ydMMMMMMMMMMdhs++so/smdddhhhhdm+` Uptime: 4 mins
oyhdmNMMMMMMMNdyooydmddddhhhhyhNd. Packages: 695 (emerge)
:oyhhdNNMMMMMMMNNNmmdddhhhhhyymMh Shell: bash 5.1.16
.:+sydNMMMMMNNNmmmdddhhhhhhmMmy Resolution: 1920x1080
/mMMMMMMNNNmmmdddhhhhhmMNhs: DE: Xfce 4.18
`oNMMMMMMMNNNmmmddddhhdmMNhs+` Theme: Chicago95 [GTK2/3]
`sNMMMMMMMMNNNmmmdddddmNMmhs/. Icons: Chicago95 [GTK2/3]
/NMMMMMMMMNNNNmmmdddmNMNdso:` Terminal: xfce4-terminal
+MMMMMMMNNNNNmmmmdmNMNdso/- Terminal Font: Monospace 12
yMMNNNNNNNmmmmmNNMmhs+/-` CPU: 12th Gen Intel i5-12500H (16) @ 4.50
/hMMNNNNNNNNMNdhs++/-` GPU: NVIDIA GeForce RTX 3060 Mobile / Max
`/ohdmmddhys+++/:.` GPU: Intel Alder Lake-P GT2 [Iris Xe Grap
`-//////:--. Memory: 862MiB / 31795MiB
|
Xorg.0.log output:
| Code: |
[ 4.974]
X.Org X Server 1.21.1.10
X Protocol Version 11, Revision 0
[ 4.974] Current Operating System: Linux dev 6.1.69-gentoo-dist #1 SMP PREEMPT_DYNAMIC Fri Jan 12 11:41:55 NZDT 2024 x86_64
[ 4.974] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist root=UUID=da0cc97f-43fa-4f24-897b-80329724ad23 ro
[ 4.974]
[ 4.974] Current version of pixman: 0.42.2
[ 4.974] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.974] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.974] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 21 15:08:36 2024
[ 4.975] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.975] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.976] (==) ServerLayout "layout"
[ 4.976] (**) |-->Screen "nvidia" (0)
[ 4.976] (**) | |-->Monitor "<default monitor>"
[ 4.976] (**) | |-->Device "nvidia"
[ 4.976] (**) | |-->GPUDevice "intel"
[ 4.976] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 4.976] (**) |-->Inactive Device "intel"
[ 4.976] (==) Automatically adding devices
[ 4.976] (==) Automatically enabling devices
[ 4.976] (==) Automatically adding GPU devices
[ 4.976] (==) Automatically binding GPU devices
[ 4.976] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.977] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 4.977] Entry deleted from font path.
[ 4.977] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 4.977] Entry deleted from font path.
[ 4.977] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 4.977] Entry deleted from font path.
[ 4.977] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 4.977] Entry deleted from font path.
[ 4.978] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi
[ 4.978] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 4.978] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.978] (II) Module ABI versions:
[ 4.978] X.Org ANSI C Emulation: 0.4
[ 4.978] X.Org Video Driver: 25.2
[ 4.978] X.Org XInput driver : 24.4
[ 4.978] X.Org Server Extension : 10.0
[ 4.978] (++) using VT number 7
[ 4.978] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.979] (--) PCI:*(0@0:2:0) 8086:46a6:1558:866c rev 12, Mem @ 0x6202000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 4.979] (--) PCI: (1@0:0:0) 10de:2520:1558:866c rev 161, Mem @ 0x83000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4.979] (II) LoadModule: "glx"
[ 4.980] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 4.984] (II) Module glx: vendor="X.Org Foundation"
[ 4.984] compiled for 1.21.1.10, module version = 1.0.0
[ 4.984] ABI class: X.Org Server Extension, version 10.0
[ 4.984] (II) LoadModule: "nvidia"
[ 4.984] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 4.987] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4.987] compiled for 1.6.99.901, module version = 1.0.0
[ 4.987] Module class: X.Org Video Driver
[ 4.987] (II) LoadModule: "modesetting"
[ 4.987] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 4.988] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.988] compiled for 1.21.1.10, module version = 1.21.1
[ 4.988] Module class: X.Org Video Driver
[ 4.988] ABI class: X.Org Video Driver, version 25.2
[ 4.988] (II) NVIDIA dlloader X Driver 535.146.02 Sun Dec 3 14:06:53 UTC 2023
[ 4.988] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4.989] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.989] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 4.989] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 4.989] (II) Loading sub module "fb"
[ 4.989] (II) LoadModule: "fb"
[ 4.989] (II) Module "fb" already built-in
[ 4.989] (II) Loading sub module "wfb"
[ 4.989] (II) LoadModule: "wfb"
[ 4.989] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 4.990] (II) Module wfb: vendor="X.Org Foundation"
[ 4.990] compiled for 1.21.1.10, module version = 1.0.0
[ 4.990] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.256] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the <============= See here failure to load
[ 5.256] (EE) NVIDIA: system's kernel log for additional error messages and
[ 5.256] (EE) NVIDIA: consult the NVIDIA README for details.
[ 5.256] (EE) open /dev/dri/card0: No such file or directory
[ 5.256] (WW) Falling back to old probe method for modesetting
[ 5.256] (EE) open /dev/dri/card0: No such file or directory
[ 5.256] (EE) open /dev/dri/card0: No such file or directory
[ 5.256] (EE) Screen 0 deleted because of no matching config section.
[ 5.256] (II) UnloadModule: "modesetting"
[ 5.256] (EE) Device(s) detected, but none match those in the config file.
[ 5.256] (EE)
Fatal server error:
[ 5.256] (EE) no screens found(EE)
[ 5.256] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5.256] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5.256] (EE)
[ 5.256] (EE) Server terminated with error (1). Closing log file.
|
|
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 3:34 am Post subject: |
|
|
continued:
dmesg output:
| Code: |
[ 0.000000] Linux version 6.1.69-gentoo-dist (portage@localhost) (x86_64-pc-linux-gnu-gcc (Gentoo 13.2.1_p20230826 p7) 13.2.1 20230826, GNU ld (Gentoo 2.41 p4) 2.41.0) #1 SMP PREEMPT_DYNAMIC Fri Jan 12 11:41:55 NZDT 2024
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist root=UUID=da0cc97f-43fa-4f24-897b-80329724ad23 ro
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000602c8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000602c9000-0x0000000060bc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000060bc9000-0x00000000629defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000629df000-0x0000000062daefff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000062daf000-0x0000000064a7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000064a7f000-0x0000000067a2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067a2f000-0x0000000067afefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000067aff000-0x0000000067afffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067b00000-0x000000006bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ca00000-0x000000006cbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006d600000-0x00000000747fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000088b7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x67afe000 ACPI 2.0=0x67afe014 TPMFinalLog=0x67986000 SMBIOS=0x63089000 MEMATTR=0x5c12d018 ESRT=0x5bdd5698
[ 0.000000] SMBIOS 3.3 present.
[ 0.000000] DMI: GIGABYTE G5 KE/G5 KE, BIOS FB04 06/20/2022
[ 0.000000] tsc: Detected 3100.000 MHz processor
[ 0.000000] tsc: Detected 3110.400 MHz TSC
[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000019] last_pfn = 0x88b800 max_arch_pfn = 0x400000000
[ 0.000242] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001280] last_pfn = 0x67b00 max_arch_pfn = 0x400000000
[ 0.010391] esrt: Reserving ESRT space from 0x000000005bdd5698 to 0x000000005bdd56f8.
[ 0.010397] e820: update [mem 0x5bdd5000-0x5bdd5fff] usable ==> reserved
[ 0.010420] Using GB pages for direct mapping
[ 0.010421] Incomplete global flushes, disabling PCID
[ 0.011188] Secure boot disabled
[ 0.011189] RAMDISK: [mem 0x353cd000-0x369ddfff]
[ 0.011191] ACPI: Early table checksum verification disabled
[ 0.011194] ACPI: RSDP 0x0000000067AFE014 000024 (v02 GBT )
[ 0.011199] ACPI: XSDT 0x0000000067A57188 000114 (v01 GBT GBTUACPI 00000002 01000013)
[ 0.011205] ACPI: FACP 0x0000000067AD2000 000114 (v06 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011210] ACPI: DSDT 0x0000000067A5A000 074F1B (v02 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011214] ACPI: FACS 0x000000006795F000 000040
[ 0.011216] ACPI: UEFI 0x0000000067A2E000 000236 (v01 GBT GBTUACPI 00000001 ACPI 00040000)
[ 0.011220] ACPI: SSDT 0x0000000067AF9000 00329F (v02 DptfTb DptfTabl 00001000 INTL 20200717)
[ 0.011223] ACPI: SSDT 0x0000000067AF3000 005D2C (v02 CpuRef CpuSsdt 00003000 INTL 20200717)
[ 0.011226] ACPI: SSDT 0x0000000067AF0000 00268B (v02 SaSsdt SaSsdt 00003000 INTL 20200717)
[ 0.011229] ACPI: SSDT 0x0000000067AEC000 00330F (v02 INTEL IgfxSsdt 00003000 INTL 20200717)
[ 0.011232] ACPI: SSDT 0x0000000067ADE000 00D39F (v02 INTEL TcssSsdt 00001000 INTL 20200717)
[ 0.011235] ACPI: SSDT 0x0000000067ADD000 00077B (v02 INSYDE Tpm2Tabl 00001000 INTL 20200717)
[ 0.011238] ACPI: TPM2 0x0000000067ADC000 00004C (v04 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011242] ACPI: MSDM 0x0000000067ADB000 000055 (v03 GBT GBTUACPI 00000000 TEST 00000000)
[ 0.011245] ACPI: SSDT 0x0000000067AD9000 0016EC (v02 INSYDE UsbCTabl 00001000 INTL 20200717)
[ 0.011248] ACPI: WSMT 0x0000000067AD8000 000028 (v01 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011251] ACPI: SSDT 0x0000000067AD6000 00160E (v02 INSYDE PtidDevc 00001000 INTL 20200717)
[ 0.011254] ACPI: DBGP 0x0000000067AD5000 000034 (v01 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011257] ACPI: DBG2 0x0000000067AD4000 000054 (v00 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011260] ACPI: NHLT 0x0000000067AD3000 00002D (v00 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011263] ACPI: HPET 0x0000000067AD1000 000038 (v01 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011266] ACPI: APIC 0x0000000067AD0000 0001DC (v04 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011269] ACPI: MCFG 0x0000000067ACF000 00003C (v01 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011272] ACPI: SSDT 0x0000000067A58000 001323 (v02 INSYDE ADL-P-M 00000002 01000013)
[ 0.011276] ACPI: $H2O 0x0000000067AFD000 00002C (v01 GBT GBTUACPI 00000001 ACPI 00040000)
[ 0.011279] ACPI: DMAR 0x0000000067A56000 000088 (v02 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011282] ACPI: SSDT 0x0000000067A53000 0027F7 (v01 NvdRef NvdTabl 00001000 INTL 20200717)
[ 0.011285] ACPI: SSDT 0x0000000067A52000 000E65 (v02 INTEL xh_adlLP 00000000 INTL 20200717)
[ 0.011288] ACPI: SSDT 0x0000000067A4E000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717)
[ 0.011291] ACPI: SSDT 0x0000000067A4A000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717)
[ 0.011294] ACPI: SSDT 0x0000000067A49000 0000F8 (v01 INSYDE PcdTabl 00001000 INTL 20200717)
[ 0.011297] ACPI: FPDT 0x0000000067A48000 000044 (v01 GBT GBTUACPI 00000002 ACPI 00040000)
[ 0.011300] ACPI: PHAT 0x0000000067A46000 000A63 (v01 GBT GBTUACPI 00000005 ACPI 00040000)
[ 0.011303] ACPI: BGRT 0x0000000067A47000 000038 (v01 GBT GBTUACPI 00000001 ACPI 00040000)
[ 0.011306] ACPI: Reserving FACP table memory at [mem 0x67ad2000-0x67ad2113]
[ 0.011308] ACPI: Reserving DSDT table memory at [mem 0x67a5a000-0x67acef1a]
[ 0.011309] ACPI: Reserving FACS table memory at [mem 0x6795f000-0x6795f03f]
[ 0.011309] ACPI: Reserving UEFI table memory at [mem 0x67a2e000-0x67a2e235]
[ 0.011310] ACPI: Reserving SSDT table memory at [mem 0x67af9000-0x67afc29e]
[ 0.011311] ACPI: Reserving SSDT table memory at [mem 0x67af3000-0x67af8d2b]
[ 0.011312] ACPI: Reserving SSDT table memory at [mem 0x67af0000-0x67af268a]
[ 0.011313] ACPI: Reserving SSDT table memory at [mem 0x67aec000-0x67aef30e]
[ 0.011314] ACPI: Reserving SSDT table memory at [mem 0x67ade000-0x67aeb39e]
[ 0.011315] ACPI: Reserving SSDT table memory at [mem 0x67add000-0x67add77a]
[ 0.011316] ACPI: Reserving TPM2 table memory at [mem 0x67adc000-0x67adc04b]
[ 0.011317] ACPI: Reserving MSDM table memory at [mem 0x67adb000-0x67adb054]
[ 0.011317] ACPI: Reserving SSDT table memory at [mem 0x67ad9000-0x67ada6eb]
[ 0.011318] ACPI: Reserving WSMT table memory at [mem 0x67ad8000-0x67ad8027]
[ 0.011319] ACPI: Reserving SSDT table memory at [mem 0x67ad6000-0x67ad760d]
[ 0.011320] ACPI: Reserving DBGP table memory at [mem 0x67ad5000-0x67ad5033]
[ 0.011321] ACPI: Reserving DBG2 table memory at [mem 0x67ad4000-0x67ad4053]
[ 0.011322] ACPI: Reserving NHLT table memory at [mem 0x67ad3000-0x67ad302c]
[ 0.011323] ACPI: Reserving HPET table memory at [mem 0x67ad1000-0x67ad1037]
[ 0.011324] ACPI: Reserving APIC table memory at [mem 0x67ad0000-0x67ad01db]
[ 0.011325] ACPI: Reserving MCFG table memory at [mem 0x67acf000-0x67acf03b]
[ 0.011326] ACPI: Reserving SSDT table memory at [mem 0x67a58000-0x67a59322]
[ 0.011326] ACPI: Reserving $H2O table memory at [mem 0x67afd000-0x67afd02b]
[ 0.011327] ACPI: Reserving DMAR table memory at [mem 0x67a56000-0x67a56087]
[ 0.011328] ACPI: Reserving SSDT table memory at [mem 0x67a53000-0x67a557f6]
[ 0.011329] ACPI: Reserving SSDT table memory at [mem 0x67a52000-0x67a52e64]
[ 0.011330] ACPI: Reserving SSDT table memory at [mem 0x67a4e000-0x67a51ae9]
[ 0.011331] ACPI: Reserving SSDT table memory at [mem 0x67a4a000-0x67a4d9d9]
[ 0.011332] ACPI: Reserving SSDT table memory at [mem 0x67a49000-0x67a490f7]
[ 0.011333] ACPI: Reserving FPDT table memory at [mem 0x67a48000-0x67a48043]
[ 0.011334] ACPI: Reserving PHAT table memory at [mem 0x67a46000-0x67a46a62]
[ 0.011335] ACPI: Reserving BGRT table memory at [mem 0x67a47000-0x67a47037]
[ 0.011672] No NUMA configuration found
[ 0.011673] Faking a node at [mem 0x0000000000000000-0x000000088b7fffff]
[ 0.011679] NODE_DATA(0) allocated [mem 0x88b7d5000-0x88b7fffff]
[ 0.011748] Zone ranges:
[ 0.011749] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011751] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011752] Normal [mem 0x0000000100000000-0x000000088b7fffff]
[ 0.011754] Device empty
[ 0.011755] Movable zone start for each node
[ 0.011756] Early memory node ranges
[ 0.011757] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.011758] node 0: [mem 0x0000000000100000-0x00000000602c8fff]
[ 0.011759] node 0: [mem 0x0000000060bc9000-0x00000000629defff]
[ 0.011760] node 0: [mem 0x0000000067aff000-0x0000000067afffff]
[ 0.011761] node 0: [mem 0x0000000100000000-0x000000088b7fffff]
[ 0.011764] Initmem setup node 0 [mem 0x0000000000001000-0x000000088b7fffff]
[ 0.011768] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.011787] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013713] On node 0, zone DMA32: 2304 pages in unavailable ranges
[ 0.013887] On node 0, zone DMA32: 20768 pages in unavailable ranges
[ 0.052449] On node 0, zone Normal: 1280 pages in unavailable ranges
[ 0.052583] On node 0, zone Normal: 18432 pages in unavailable ranges
[ 0.052657] Reserving Intel graphics memory at [mem 0x70800000-0x747fffff]
[ 0.053719] ACPI: PM-Timer IO Port: 0x1808
[ 0.053727] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.053729] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.053730] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.053731] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.053731] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.053732] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.053733] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.053733] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.053734] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.053734] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.053735] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.053736] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.053736] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.053737] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.053737] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.053738] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.053739] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[ 0.053739] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[ 0.053740] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[ 0.053741] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[ 0.053741] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[ 0.053742] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[ 0.053742] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[ 0.053743] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.053778] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.053783] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.053785] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053789] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.053790] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.053799] e820: update [mem 0x5b8dd000-0x5b934fff] usable ==> reserved
[ 0.053810] TSC deadline timer available
[ 0.053812] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.053830] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.053833] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.053834] PM: hibernation: Registered nosave memory: [mem 0x5b8dd000-0x5b934fff]
[ 0.053836] PM: hibernation: Registered nosave memory: [mem 0x5bdd5000-0x5bdd5fff]
[ 0.053838] PM: hibernation: Registered nosave memory: [mem 0x602c9000-0x60bc8fff]
[ 0.053839] PM: hibernation: Registered nosave memory: [mem 0x629df000-0x62daefff]
[ 0.053840] PM: hibernation: Registered nosave memory: [mem 0x62daf000-0x64a7efff]
[ 0.053841] PM: hibernation: Registered nosave memory: [mem 0x64a7f000-0x67a2efff]
[ 0.053841] PM: hibernation: Registered nosave memory: [mem 0x67a2f000-0x67afefff]
[ 0.053843] PM: hibernation: Registered nosave memory: [mem 0x67b00000-0x6bffffff]
[ 0.053843] PM: hibernation: Registered nosave memory: [mem 0x6c000000-0x6c9fffff]
[ 0.053844] PM: hibernation: Registered nosave memory: [mem 0x6ca00000-0x6cbfffff]
[ 0.053845] PM: hibernation: Registered nosave memory: [mem 0x6cc00000-0x6d5fffff]
[ 0.053845] PM: hibernation: Registered nosave memory: [mem 0x6d600000-0x747fffff]
[ 0.053846] PM: hibernation: Registered nosave memory: [mem 0x74800000-0xbfffffff]
[ 0.053846] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[ 0.053847] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfe00ffff]
[ 0.053848] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
[ 0.053848] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed1ffff]
[ 0.053849] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.053849] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff]
[ 0.053850] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.053852] [mem 0x74800000-0xbfffffff] available for PCI devices
[ 0.053853] Booting paravirtualized kernel on bare hardware
[ 0.053855] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.060795] setup_percpu: NR_CPUS:512 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.061313] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[ 0.061320] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[ 0.061323] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.061349] Fallback order for Node 0: 0
[ 0.061352] Built 1 zonelists, mobility grouping on. Total pages: 8182908
[ 0.061353] Policy zone: Normal
[ 0.061355] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist root=UUID=da0cc97f-43fa-4f24-897b-80329724ad23 ro
[ 0.061385] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist", will be passed to user space.
[ 0.061407] random: crng init done
[ 0.063784] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.065007] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.065333] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.065343] software IO TLB: area num 16.
[ 0.126695] Memory: 32455212K/33251832K available (18446K kernel code, 3171K rwdata, 5872K rodata, 2824K init, 16896K bss, 796360K reserved, 0K cma-reserved)
[ 0.126815] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.126847] ftrace: allocating 53761 entries in 211 pages
[ 0.134101] ftrace: allocated 211 pages with 5 groups
[ 0.134908] Dynamic Preempt: voluntary
[ 0.134950] rcu: Preemptible hierarchical RCU implementation.
[ 0.134950] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.134952] Trampoline variant of Tasks RCU enabled.
[ 0.134952] Rude variant of Tasks RCU enabled.
[ 0.134953] Tracing variant of Tasks RCU enabled.
[ 0.134953] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.134954] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.139549] NR_IRQS: 33024, nr_irqs: 2184, preallocated irqs: 16
[ 0.139895] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.140374] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.140404] Console: colour dummy device 80x25
[ 0.140654] printk: console [tty0] enabled
[ 0.140679] ACPI: Core revision 20220331
[ 0.141321] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.141532] APIC: Switch to symmetric I/O mode setup
[ 0.141535] DMAR: Host address width 39
[ 0.141536] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.141543] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ 0.141547] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.141552] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
[ 0.141556] DMAR: RMRR base: 0x00000070000000 end: 0x000000747fffff
[ 0.141560] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.141562] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.141564] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.145662] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.145665] x2apic enabled
[ 0.145719] Switched APIC routing to cluster x2apic.
[ 0.157399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.171455] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
[ 0.171462] Calibrating delay loop (skipped), value calculated using timer frequency.. 6223.00 BogoMIPS (lpj=10368000)
[ 0.171528] CPU0: Thermal monitoring enabled (TM1)
[ 0.171531] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.171657] process: using mwait in idle threads
[ 0.171660] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.171662] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.171666] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.171669] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.171671] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.171673] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.171676] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.171678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.171691] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.171693] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.171695] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.171697] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.171699] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.171702] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.171704] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[ 0.187436] Freeing SMP alternatives memory: 48K
[ 0.187441] pid_max: default: 32768 minimum: 301
[ 0.190542] LSM: Security Framework initializing
[ 0.190547] Yama: becoming mindful.
[ 0.190611] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.190656] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.191551] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i5-12500H (family: 0x6, model: 0x9a, stepping: 0x3)
[ 0.191657] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.191660] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.191670] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.191672] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.191683] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.191684] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.191695] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.191835] core: cpu_core PMU driver:
[ 0.191837] ... version: 5
[ 0.191838] ... bit width: 48
[ 0.191839] ... generic registers: 8
[ 0.191840] ... value mask: 0000ffffffffffff
[ 0.191842] ... max period: 00007fffffffffff
[ 0.191843] ... fixed-purpose events: 4
[ 0.191844] ... event mask: 0001000f000000ff
[ 0.191881] signal: max sigframe size: 3632
[ 0.191893] Estimated ratio of average max frequency by base frequency (times 1024): 1387
[ 0.191909] rcu: Hierarchical SRCU implementation.
[ 0.191910] rcu: Max phase no-delay instances is 1000.
[ 0.192156] smp: Bringing up secondary CPUs ...
[ 0.192215] x86: Booting SMP configuration:
[ 0.192216] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8
[ 0.011191] core: cpu_atom PMU driver: PEBS-via-PT
[ 0.011191] ... version: 5
[ 0.011191] ... bit width: 48
[ 0.011191] ... generic registers: 6
[ 0.011191] ... value mask: 0000ffffffffffff
[ 0.011191] ... max period: 00007fffffffffff
[ 0.011191] ... fixed-purpose events: 3
[ 0.011191] ... event mask: 000000070000003f
[ 0.210201] #9 #10 #11 #12 #13 #14 #15
[ 0.226777] smp: Brought up 1 node, 16 CPUs
[ 0.226777] smpboot: Max logical packages: 1
[ 0.226777] smpboot: Total of 16 processors activated (99572.00 BogoMIPS)
[ 0.229004] devtmpfs: initialized
[ 0.229004] x86/mm: Memory block size: 128MB
[ 0.229507] ACPI: PM: Registering ACPI NVS region [mem 0x64a7f000-0x67a2efff] (50003968 bytes)
[ 0.229507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.229507] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.229507] pinctrl core: initialized pinctrl subsystem
[ 0.231463] PM: RTC time: 15:08:31, date: 2024-01-21
[ 0.231776] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.231846] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.231855] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.231862] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.231869] audit: initializing netlink subsys (disabled)
[ 0.231874] audit: type=2000 audit(1705849711.083:1): state=initialized audit_enabled=0 res=1
[ 0.231874] thermal_sys: Registered thermal governor 'fair_share'
[ 0.231874] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.231874] thermal_sys: Registered thermal governor 'step_wise'
[ 0.231874] thermal_sys: Registered thermal governor 'user_space'
[ 0.231874] cpuidle: using governor menu
[ 0.231874] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.231874] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.231874] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.231874] PCI: Using configuration type 1 for base access
[ 0.231916] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.232642] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.248158] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.248158] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.248158] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.248158] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.248284] cryptd: max_cpu_qlen set to 1000
[ 0.248284] raid6: skipped pq benchmark and selected avx2x4
[ 0.248284] raid6: using avx2x2 recovery algorithm
[ 0.248284] fbcon: Taking over console
[ 0.248284] ACPI: Added _OSI(Module Device)
[ 0.248284] ACPI: Added _OSI(Processor Device)
[ 0.248284] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.248284] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.343343] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.MHBR], AE_NOT_FOUND (20220331/psargs-330)
[ 0.343352] ACPI: Ignoring error and continuing table load
[ 0.343372] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PTID.PBAR], AE_NOT_FOUND (20220331/dsfield-500)
[ 0.346414] ACPI: 15 ACPI AML tables successfully acquired and loaded
[ 0.362409] ACPI: Dynamic OEM Table Load:
[ 0.362423] ACPI: SSDT 0xFFFF9502C1E1A400 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717)
[ 0.363331] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.363880] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.363880] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.363880] ACPI: Dynamic OEM Table Load:
[ 0.363880] ACPI: SSDT 0xFFFF9502C1DA6000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717)
[ 0.363955] ACPI: Dynamic OEM Table Load:
[ 0.363962] ACPI: SSDT 0xFFFF9502C1DD5000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20200717)
[ 0.365106] ACPI: Dynamic OEM Table Load:
[ 0.365113] ACPI: SSDT 0xFFFF9502C1DD7800 0004BA (v02 PmRef Cpu0Hwp 00003000 INTL 20200717)
[ 0.366421] ACPI: Dynamic OEM Table Load:
[ 0.366430] ACPI: SSDT 0xFFFF9502C243E000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717)
[ 0.367969] ACPI: Dynamic OEM Table Load:
[ 0.367977] ACPI: SSDT 0xFFFF9502C2438000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717)
[ 0.369362] ACPI: Dynamic OEM Table Load:
[ 0.369370] ACPI: SSDT 0xFFFF9502C243A000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717)
[ 0.370785] ACPI: Dynamic OEM Table Load:
[ 0.370792] ACPI: SSDT 0xFFFF9502C1DAF000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717)
[ 0.378164] ACPI: EC: EC started
[ 0.378166] ACPI: EC: interrupt blocked
[ 0.384422] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.384425] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.384427] ACPI: Interpreter enabled
[ 0.384501] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.384503] ACPI: Using IOAPIC for interrupt routing
[ 0.384555] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.384558] PCI: Using E820 reservations for host bridge windows
[ 0.385360] ACPI: Enabled 10 GPEs in block 00 to 7F
[ 0.386418] ACPI: PM: Power Resource [PG00]
[ 0.390132] ACPI: PM: Power Resource [BTRT]
[ 0.393003] ACPI: PM: Power Resource [WRST]
[ 0.402475] ACPI: PM: Power Resource [TBT0]
[ 0.402531] ACPI: PM: Power Resource [TBT1]
[ 0.402581] ACPI: PM: Power Resource [D3C]
[ 0.534295] ACPI: PM: Power Resource [PIN]
[ 0.534548] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ 0.534555] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.536225] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.539449] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
[ 0.544035] PCI host bridge to bus 0000:00
[ 0.544037] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.544040] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.544042] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.544045] pci_bus 0000:00: root bus resource [mem 0x74800000-0xbfffffff window]
[ 0.544047] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.544049] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.544110] pci 0000:00:00.0: [8086:4621] type 00 class 0x060000
[ 0.544453] pci 0000:00:01.0: [8086:460d] type 01 class 0x060400
[ 0.544524] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.544549] pci 0000:00:01.0: PTM enabled (root), 4ns granularity
[ 0.545165] pci 0000:00:02.0: [8086:46a6] type 00 class 0x030000
[ 0.545179] pci 0000:00:02.0: reg 0x10: [mem 0x6202000000-0x6202ffffff 64bit]
[ 0.545187] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.545193] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.545211] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.545213] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.545217] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.545248] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
[ 0.545250] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
[ 0.545257] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
[ 0.545259] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
[ 0.545380] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000
[ 0.545397] pci 0000:00:04.0: reg 0x10: [mem 0x6203140000-0x620315ffff 64bit]
[ 0.545689] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400
[ 0.545768] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.545796] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
[ 0.546419] pci 0000:00:07.0: [8086:466e] type 01 class 0x060400
[ 0.546465] pci 0000:00:07.0: Overriding RP PIO Log Size to 4
[ 0.546541] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.546568] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
[ 0.547462] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000
[ 0.547473] pci 0000:00:08.0: reg 0x10: [mem 0x620318a000-0x620318afff 64bit]
[ 0.547579] pci 0000:00:0a.0: [8086:467d] type 00 class 0x118000
[ 0.547589] pci 0000:00:0a.0: reg 0x10: [mem 0x6203170000-0x6203177fff 64bit]
[ 0.547615] pci 0000:00:0a.0: enabling Extended Tags
[ 0.547726] pci 0000:00:0d.0: [8086:461e] type 00 class 0x0c0330
[ 0.547738] pci 0000:00:0d.0: reg 0x10: [mem 0x6203160000-0x620316ffff 64bit]
[ 0.547789] pci 0000:00:0d.0: PME# supported from D3hot D3cold
[ 0.548223] pci 0000:00:0d.2: [8086:463e] type 00 class 0x0c0340
[ 0.548236] pci 0000:00:0d.2: reg 0x10: [mem 0x6203100000-0x620313ffff 64bit]
[ 0.548245] pci 0000:00:0d.2: reg 0x18: [mem 0x6203189000-0x6203189fff 64bit]
[ 0.548284] pci 0000:00:0d.2: supports D1 D2
[ 0.548285] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.548543] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330
[ 0.548570] pci 0000:00:14.0: reg 0x10: [mem 0x825a0000-0x825affff 64bit]
[ 0.548684] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.549155] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000
[ 0.549183] pci 0000:00:14.2: reg 0x10: [mem 0x6203180000-0x6203183fff 64bit]
[ 0.549204] pci 0000:00:14.2: reg 0x18: [mem 0x6203188000-0x6203188fff 64bit]
[ 0.549449] pci 0000:00:14.3: [8086:51f0] type 00 class 0x028000
[ 0.549517] pci 0000:00:14.3: reg 0x10: [mem 0x620317c000-0x620317ffff 64bit]
[ 0.549734] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.550564] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000
[ 0.551295] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.554940] pci 0000:00:15.1: [8086:51e9] type 00 class 0x0c8000
[ 0.555672] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.562229] pci 0000:00:16.0: [8086:51e0] type 00 class 0x078000
[ 0.562258] pci 0000:00:16.0: reg 0x10: [mem 0x6203185000-0x6203185fff 64bit]
[ 0.562365] pci 0000:00:16.0: PME# supported from D3hot
[ 0.562975] pci 0000:00:1c.0: [8086:51bd] type 01 class 0x060400
[ 0.563113] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.563152] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.563804] pci 0000:00:1d.0: [8086:51b0] type 01 class 0x060400
[ 0.563931] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.563969] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.564624] pci 0000:00:1f.0: [8086:5182] type 00 class 0x060100
[ 0.565023] pci 0000:00:1f.3: [8086:51c8] type 00 class 0x040300
[ 0.565081] pci 0000:00:1f.3: reg 0x10: [mem 0x6203178000-0x620317bfff 64bit]
[ 0.565153] pci 0000:00:1f.3: reg 0x20: [mem 0x6203000000-0x62030fffff 64bit]
[ 0.565310] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.565800] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500
[ 0.565904] pci 0000:00:1f.4: reg 0x10: [mem 0x6203184000-0x62031840ff 64bit]
[ 0.566010] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.566355] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000
[ 0.566379] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.566574] pci 0000:00:1f.6: [8086:1a1f] type 00 class 0x020000
[ 0.566634] pci 0000:00:1f.6: reg 0x10: [mem 0x82580000-0x8259ffff]
[ 0.566945] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.567232] pci 0000:01:00.0: [10de:2520] type 00 class 0x030000
[ 0.567243] pci 0000:01:00.0: reg 0x10: [mem 0x83000000-0x83ffffff]
[ 0.567252] pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x61ffffffff 64bit pref]
[ 0.567261] pci 0000:01:00.0: reg 0x1c: [mem 0x6200000000-0x6201ffffff 64bit pref]
[ 0.567267] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.567273] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.567326] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.567385] pci 0000:01:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.567543] pci 0000:01:00.1: [10de:228e] type 00 class 0x040300
[ 0.567553] pci 0000:01:00.1: reg 0x10: [mem 0x84000000-0x84003fff]
[ 0.567665] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.567669] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.567672] pci 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[ 0.567677] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref]
[ 0.567794] pci 0000:02:00.0: [1987:5016] type 00 class 0x010802
[ 0.567810] pci 0000:02:00.0: reg 0x10: [mem 0x82400000-0x82403fff 64bit]
[ 0.568096] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.568100] pci 0000:00:06.0: bridge window [mem 0x82400000-0x824fffff]
[ 0.568138] pci 0000:00:07.0: PCI bridge to [bus 03-2b]
[ 0.568143] pci 0000:00:07.0: bridge window [mem 0x76000000-0x821fffff]
[ 0.568148] pci 0000:00:07.0: bridge window [mem 0x6210000000-0x622bffffff 64bit pref]
[ 0.568323] pci 0000:2c:00.0: [1217:8621] type 00 class 0x080501
[ 0.568346] pci 0000:2c:00.0: reg 0x10: [mem 0x82301000-0x82301fff]
[ 0.568357] pci 0000:2c:00.0: reg 0x14: [mem 0x82300000-0x823007ff]
[ 0.568509] pci 0000:2c:00.0: PME# supported from D3hot D3cold
[ 0.578256] pci 0000:00:1c.0: PCI bridge to [bus 2c]
[ 0.578262] pci 0000:00:1c.0: bridge window [mem 0x82300000-0x823fffff]
[ 0.578349] pci 0000:2d:00.0: [15b7:5009] type 00 class 0x010802
[ 0.578377] pci 0000:2d:00.0: reg 0x10: [mem 0x82200000-0x82203fff 64bit]
[ 0.578417] pci 0000:2d:00.0: reg 0x20: [mem 0x82204000-0x822040ff 64bit]
[ 0.578678] pci 0000:00:1d.0: PCI bridge to [bus 2d]
[ 0.578685] pci 0000:00:1d.0: bridge window [mem 0x82200000-0x822fffff]
[ 0.583458] ACPI: EC: interrupt unblocked
[ 0.583460] ACPI: EC: event unblocked
|
|
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 3:36 am Post subject: |
|
|
dmesg continued:
| Code: |
[ 0.583497] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.583498] ACPI: EC: GPE=0x6e
[ 0.583500] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.583502] ACPI: \_SB_.PC00.LPCB.EC__: EC: Used to handle transactions and events
[ 0.583572] iommu: Default domain type: Translated
[ 0.583572] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.583572] SCSI subsystem initialized
[ 0.583572] libata version 3.00 loaded.
[ 0.583572] ACPI: bus type USB registered
[ 0.583572] usbcore: registered new interface driver usbfs
[ 0.583572] usbcore: registered new interface driver hub
[ 0.583572] usbcore: registered new device driver usb
[ 0.583572] pps_core: LinuxPPS API ver. 1 registered
[ 0.583572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.583572] PTP clock support registered
[ 0.583572] EDAC MC: Ver: 3.0.0
[ 0.583572] Registered efivars operations
[ 0.583572] NetLabel: Initializing
[ 0.583572] NetLabel: domain hash size = 128
[ 0.583572] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.583572] NetLabel: unlabeled traffic allowed by default
[ 0.583572] mctp: management component transport protocol core
[ 0.583572] NET: Registered PF_MCTP protocol family
[ 0.583572] PCI: Using ACPI for IRQ routing
[ 0.664687] PCI: pci_cache_line_size set to 64 bytes
[ 0.665070] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 0.665276] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.665277] e820: reserve RAM buffer [mem 0x5b8dd000-0x5bffffff]
[ 0.665278] e820: reserve RAM buffer [mem 0x5bdd5000-0x5bffffff]
[ 0.665279] e820: reserve RAM buffer [mem 0x602c9000-0x63ffffff]
[ 0.665280] e820: reserve RAM buffer [mem 0x629df000-0x63ffffff]
[ 0.665281] e820: reserve RAM buffer [mem 0x67b00000-0x67ffffff]
[ 0.665282] e820: reserve RAM buffer [mem 0x88b800000-0x88bffffff]
[ 0.668170] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.668170] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.668170] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.668170] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.668170] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.668170] vgaarb: loaded
[ 0.668172] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.668172] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.670270] clocksource: Switched to clocksource tsc-early
[ 0.676733] VFS: Disk quotas dquot_6.6.0
[ 0.676743] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.676794] pnp: PnP ACPI init
[ 0.676991] pnp 00:00: disabling [io 0x3322-0x3323] because it overlaps 0000:00:01.0 BAR 13 [io 0x3000-0x3fff]
[ 0.677151] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.677582] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 0.677604] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.677607] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.677609] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.677611] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.677613] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.677615] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.677618] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.678240] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.679190] pnp: PnP ACPI: found 8 devices
[ 0.684509] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.684570] NET: Registered PF_INET protocol family
[ 0.684755] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.687581] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.687606] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.687615] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.687886] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.688063] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.688220] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.688275] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.688317] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.688385] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.688391] NET: Registered PF_XDP protocol family
[ 0.688394] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.688401] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 03-2b] add_size 1000
[ 0.688412] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.688417] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ 0.688422] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.688427] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ 0.688430] pci 0000:00:07.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.688432] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.688436] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ 0.688784] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.688788] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[ 0.689136] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff]
[ 0.689139] pci 0000:00:1f.5: BAR 0: assigned [mem 0x74800000-0x74800fff]
[ 0.689160] pci 0000:01:00.0: BAR 6: assigned [mem 0x84080000-0x840fffff pref]
[ 0.689163] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.689165] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.689174] pci 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[ 0.689178] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref]
[ 0.689183] pci 0000:00:06.0: PCI bridge to [bus 02]
[ 0.689190] pci 0000:00:06.0: bridge window [mem 0x82400000-0x824fffff]
[ 0.689200] pci 0000:00:07.0: PCI bridge to [bus 03-2b]
[ 0.689203] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.689207] pci 0000:00:07.0: bridge window [mem 0x76000000-0x821fffff]
[ 0.689210] pci 0000:00:07.0: bridge window [mem 0x6210000000-0x622bffffff 64bit pref]
[ 0.689216] pci 0000:00:1c.0: PCI bridge to [bus 2c]
[ 0.689235] pci 0000:00:1c.0: bridge window [mem 0x82300000-0x823fffff]
[ 0.689246] pci 0000:00:1d.0: PCI bridge to [bus 2d]
[ 0.689254] pci 0000:00:1d.0: bridge window [mem 0x82200000-0x822fffff]
[ 0.689265] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.689268] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.689269] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.689271] pci_bus 0000:00: resource 7 [mem 0x74800000-0xbfffffff window]
[ 0.689273] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 0.689275] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.689277] pci_bus 0000:01: resource 1 [mem 0x83000000-0x840fffff]
[ 0.689279] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6201ffffff 64bit pref]
[ 0.689281] pci_bus 0000:02: resource 1 [mem 0x82400000-0x824fffff]
[ 0.689283] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.689285] pci_bus 0000:03: resource 1 [mem 0x76000000-0x821fffff]
[ 0.689287] pci_bus 0000:03: resource 2 [mem 0x6210000000-0x622bffffff 64bit pref]
[ 0.689289] pci_bus 0000:2c: resource 1 [mem 0x82300000-0x823fffff]
[ 0.689291] pci_bus 0000:2d: resource 1 [mem 0x82200000-0x822fffff]
[ 0.691511] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.691530] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.691717] PCI: CLS 64 bytes, default 64
[ 0.691751] DMAR: Intel-IOMMU force enabled due to platform opt in
[ 0.691758] DMAR: No ATSR found
[ 0.691759] DMAR: No SATC found
[ 0.691761] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.691762] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.691764] DMAR: IOMMU feature nwfs inconsistent
[ 0.691765] DMAR: IOMMU feature dit inconsistent
[ 0.691766] DMAR: IOMMU feature sc_support inconsistent
[ 0.691768] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.691769] DMAR: dmar0: Using Queued invalidation
[ 0.691773] DMAR: dmar1: Using Queued invalidation
[ 0.691806] Trying to unpack rootfs image as initramfs...
[ 0.692010] pci 0000:00:02.0: Adding to iommu group 0
[ 0.692037] pci 0000:00:00.0: Adding to iommu group 1
[ 0.692046] pci 0000:00:01.0: Adding to iommu group 2
[ 0.692053] pci 0000:00:04.0: Adding to iommu group 3
[ 0.692066] pci 0000:00:06.0: Adding to iommu group 4
[ 0.692074] pci 0000:00:07.0: Adding to iommu group 5
[ 0.692080] pci 0000:00:08.0: Adding to iommu group 6
[ 0.692087] pci 0000:00:0a.0: Adding to iommu group 7
[ 0.692101] pci 0000:00:0d.0: Adding to iommu group 8
[ 0.692108] pci 0000:00:0d.2: Adding to iommu group 8
[ 0.692121] pci 0000:00:14.0: Adding to iommu group 9
[ 0.692128] pci 0000:00:14.2: Adding to iommu group 9
[ 0.692135] pci 0000:00:14.3: Adding to iommu group 10
[ 0.692149] pci 0000:00:15.0: Adding to iommu group 11
[ 0.692157] pci 0000:00:15.1: Adding to iommu group 11
[ 0.692167] pci 0000:00:16.0: Adding to iommu group 12
[ 0.692178] pci 0000:00:1c.0: Adding to iommu group 13
[ 0.692187] pci 0000:00:1d.0: Adding to iommu group 14
[ 0.692209] pci 0000:00:1f.0: Adding to iommu group 15
[ 0.692217] pci 0000:00:1f.3: Adding to iommu group 15
[ 0.692225] pci 0000:00:1f.4: Adding to iommu group 15
[ 0.692233] pci 0000:00:1f.5: Adding to iommu group 15
[ 0.692241] pci 0000:00:1f.6: Adding to iommu group 15
[ 0.692255] pci 0000:01:00.0: Adding to iommu group 16
[ 0.692266] pci 0000:01:00.1: Adding to iommu group 16
[ 0.692277] pci 0000:02:00.0: Adding to iommu group 17
[ 0.692293] pci 0000:2c:00.0: Adding to iommu group 18
[ 0.692301] pci 0000:2d:00.0: Adding to iommu group 19
[ 0.692400] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.692402] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.692403] software IO TLB: mapped [mem 0x000000005633d000-0x000000005a33d000] (64MB)
[ 0.692421] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
[ 0.692520] clocksource: Switched to clocksource tsc
[ 0.694892] Initialise system trusted keyrings
[ 0.694901] Key type blacklist registered
[ 0.694923] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.695867] zbud: loaded
[ 0.696189] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[ 0.706325] NET: Registered PF_ALG protocol family
[ 0.706331] xor: automatically using best checksumming function avx
[ 0.706336] Key type asymmetric registered
[ 0.706338] Asymmetric key parser 'x509' registered
[ 1.117590] Freeing initrd memory: 22596K
[ 1.119368] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.119394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.119429] io scheduler mq-deadline registered
[ 1.119432] io scheduler kyber registered
[ 1.119463] io scheduler bfq registered
[ 1.119765] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 1.120032] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[ 1.120271] pcieport 0000:00:06.0: PME: Signaling with IRQ 123
[ 1.120469] pcieport 0000:00:07.0: PME: Signaling with IRQ 124
[ 1.120487] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.120887] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[ 1.121173] pcieport 0000:00:1d.0: PME: Signaling with IRQ 126
[ 1.121290] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.122439] ACPI: AC: AC Adapter [AC] (on-line)
[ 1.122487] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.122558] ACPI: button: Power Button [PWRB]
[ 1.122582] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.122607] ACPI: button: Sleep Button [SLPB]
[ 1.122631] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.122654] ACPI: button: Lid Switch [LID0]
[ 1.122676] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.122698] ACPI: button: Power Button [PWRF]
[ 1.126116] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.126120] ACPI: thermal: Thermal Zone [TZ0] (61 C)
[ 1.126334] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.126924] ACPI: battery: Slot [BAT0] (battery present)
[ 1.127707] Non-volatile memory driver v1.3
[ 1.127714] Linux agpgart interface v0.103
[ 1.136161] ACPI: bus type drm_connector registered
[ 1.148067] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 1.165272] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[ 1.170714] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 1.170743] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
[ 1.171803] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 1.171962] xhci_hcd 0000:00:0d.0: xHCI Host Controller
[ 1.172155] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[ 1.172169] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 1.172206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.172210] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172213] usb usb1: Product: xHCI Host Controller
[ 1.172216] usb usb1: Manufacturer: Linux 6.1.69-gentoo-dist xhci-hcd
[ 1.172218] usb usb1: SerialNumber: 0000:00:0d.0
[ 1.172401] hub 1-0:1.0: USB hub found
[ 1.172414] hub 1-0:1.0: 1 port detected
[ 1.172631] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.172637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172640] usb usb2: Product: xHCI Host Controller
[ 1.172642] usb usb2: Manufacturer: Linux 6.1.69-gentoo-dist xhci-hcd
[ 1.172644] usb usb2: SerialNumber: 0000:00:0d.0
[ 1.172910] hub 2-0:1.0: USB hub found
[ 1.172925] hub 2-0:1.0: 1 port detected
[ 1.173669] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.173796] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.174954] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
[ 1.175252] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.175448] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.175462] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.175512] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.175516] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.175519] usb usb3: Product: xHCI Host Controller
[ 1.175522] usb usb3: Manufacturer: Linux 6.1.69-gentoo-dist xhci-hcd
[ 1.175524] usb usb3: SerialNumber: 0000:00:14.0
[ 1.175748] hub 3-0:1.0: USB hub found
[ 1.175781] hub 3-0:1.0: 12 ports detected
[ 1.177562] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.177568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.177571] usb usb4: Product: xHCI Host Controller
[ 1.177573] usb usb4: Manufacturer: Linux 6.1.69-gentoo-dist xhci-hcd
[ 1.177575] usb usb4: SerialNumber: 0000:00:14.0
[ 1.177733] hub 4-0:1.0: USB hub found
[ 1.177756] hub 4-0:1.0: 4 ports detected
[ 1.178286] usb: port power management may be unreliable
[ 1.178410] usbcore: registered new interface driver usbserial_generic
[ 1.178416] usbserial: USB Serial support registered for generic
[ 1.178447] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.184246] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.184252] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.184407] mousedev: PS/2 mouse device common for all mice
[ 1.184561] rtc_cmos 00:01: RTC can wake from S4
[ 1.186473] rtc_cmos 00:01: registered as rtc0
[ 1.186851] rtc_cmos 00:01: setting system clock to 2024-01-21T15:08:32 UTC (1705849712)
[ 1.186885] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 1.187986] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.188007] device-mapper: uevent: version 1.0.3
[ 1.188095] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 1.188351] intel_pstate: Intel P-state driver initializing
[ 1.190875] intel_pstate: HWP enabled
[ 1.190992] efifb: probing for efifb
[ 1.191001] efifb: framebuffer at 0x4000000000, using 8128k, total 8128k
[ 1.191003] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.191005] efifb: scrolling: redraw
[ 1.191006] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.191151] Console: switching to colour frame buffer device 240x67
[ 1.192636] fb0: EFI VGA frame buffer device
[ 1.192680] hid: raw HID events driver (C) Jiri Kosina
[ 1.192702] usbcore: registered new interface driver usbhid
[ 1.192707] usbhid: USB HID core driver
[ 1.192798] intel_pmc_core INT33A1:00: initialized
[ 1.192909] drop_monitor: Initializing network drop monitor service
[ 1.192959] Initializing XFRM netlink socket
[ 1.193005] NET: Registered PF_INET6 protocol family
[ 1.193394] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.195008] Segment Routing with IPv6
[ 1.195014] RPL Segment Routing with IPv6
[ 1.195023] In-situ OAM (IOAM) with IPv6
[ 1.195040] mip6: Mobile IPv6
[ 1.195044] NET: Registered PF_PACKET protocol family
[ 1.196299] microcode: sig=0x906a3, pf=0x80, revision=0x41e
[ 1.196761] microcode: Microcode Update Driver: v2.2.
[ 1.196764] IPI shorthand broadcast: enabled
[ 1.196777] AVX2 version of gcm_enc/dec engaged.
[ 1.197481] AES CTR mode by8 optimization enabled
[ 1.197638] sched_clock: Marking stable (1189769264, 7858317)->(1215898740, -18271159)
[ 1.197700] registered taskstats version 1
[ 1.197846] Loading compiled-in X.509 certificates
[ 1.197924] zswap: loaded using pool lzo/zbud
[ 1.197975] Key type .fscrypt registered
[ 1.197979] Key type fscrypt-provisioning registered
[ 1.198149] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 1.198163] Key type big_key registered
[ 1.198171] Key type trusted registered
[ 1.198946] Key type encrypted registered
[ 1.198956] ima: Allocated hash algorithm: sha256
[ 1.237985] ima: No architecture policies found
[ 1.238007] evm: Initialising EVM extended attributes:
[ 1.238020] evm: security.selinux
[ 1.238030] evm: security.SMACK64 (disabled)
[ 1.238041] evm: security.SMACK64EXEC (disabled)
[ 1.238053] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.238065] evm: security.SMACK64MMAP (disabled)
[ 1.238076] evm: security.apparmor
[ 1.238085] evm: security.ima
[ 1.238093] evm: security.capability
[ 1.238104] evm: HMAC attrs: 0x1
[ 1.241504] PM: Magic number: 8:203:134
[ 1.242176] acpi device:09: hash matches
[ 1.242793] RAS: Correctable Errors collector initialized.
[ 1.253160] Freeing unused decrypted memory: 2036K
[ 1.253912] Freeing unused kernel image (initmem) memory: 2824K
[ 1.278053] Write protecting the kernel read-only data: 26624k
[ 1.279936] Freeing unused kernel image (text/rodata gap) memory: 2032K
[ 1.280819] Freeing unused kernel image (rodata/data gap) memory: 272K
[ 1.289353] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.289728] Run /init as init process
[ 1.290081] with arguments:
[ 1.290082] /init
[ 1.290082] with environment:
[ 1.290083] HOME=/
[ 1.290083] TERM=linux
[ 1.290083] BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist
[ 1.321085] dracut: Gentoo-2.14
[ 1.424682] usb 3-6: new full-speed USB device number 2 using xhci_hcd
[ 1.566364] usb 3-6: New USB device found, idVendor=1038, idProduct=1720, bcdDevice= 1.24
[ 1.568797] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.570667] usb 3-6: Product: SteelSeries Rival 310 eSports Mouse
[ 1.572107] usb 3-6: Manufacturer: SteelSeries
[ 1.576236] hid-generic 0003:1038:1720.0001: hiddev96,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:00:14.0-6/input0
[ 1.578801] input: SteelSeries SteelSeries Rival 310 eSports Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:1038:1720.0002/input/input7
[ 1.580230] hid-generic 0003:1038:1720.0002: input,hidraw1: USB HID v1.11 Mouse [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:00:14.0-6/input1
[ 1.582218] input: SteelSeries SteelSeries Rival 310 eSports Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:1038:1720.0003/input/input8
[ 1.608479] input: FTCS1000:01 2808:0101 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-FTCS1000:01/0018:2808:0101.0004/input/input9
[ 1.638707] hid-generic 0003:1038:1720.0003: input,hidraw2: USB HID v1.11 Keyboard [SteelSeries SteelSeries Rival 310 eSports Mouse] on usb-0000:00:14.0-6/input2
[ 1.639012] input: FTCS1000:01 2808:0101 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-FTCS1000:01/0018:2808:0101.0004/input/input10
[ 1.644692] hid-generic 0018:2808:0101.0004: input,hidraw3: I2C HID v1.00 Mouse [FTCS1000:01 2808:0101] on i2c-FTCS1000:01
[ 1.649798] sdhci: Secure Digital Host Controller Interface driver
[ 1.649929] nvme nvme0: pci function 0000:02:00.0
[ 1.651679] sdhci: Copyright(c) Pierre Ossman
[ 1.655811] nvme nvme1: pci function 0000:2d:00.0
[ 1.660126] nvme nvme0: Shutdown timeout set to 10 seconds
[ 1.663094] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.665797] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 1.667230] Alternate GPT is invalid, using primary GPT.
[ 1.667292] nvme nvme1: allocated 32 MiB host memory buffer.
[ 1.667812] nvme0n1: p1 p2 p3 p4 p5
[ 1.670222] nvme nvme1: 16/0/0 default/read/poll queues
[ 1.674830] nvme1n1: p1 p2 p3
[ 1.678525] sdhci-pci 0000:2c:00.0: SDHCI controller found [1217:8621] (rev 1)
[ 1.680810] sdhci-pci 0000:2c:00.0: enabling device (0000 -> 0002)
[ 1.684413] mmc0: SDHCI controller on PCI [0000:2c:00.0] using ADMA
[ 1.687931] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.708909] usb 4-1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[ 1.711128] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.712751] usb 4-1: Product: Ultra USB 3.0
[ 1.714012] usb 4-1: Manufacturer: SanDisk
[ 1.715100] usb 4-1: SerialNumber: 4C530000200120115115
[ 1.719506] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1.720735] scsi host0: usb-storage 4-1:1.0
[ 1.721781] usbcore: registered new interface driver usb-storage
[ 1.722766] usbcore: registered new interface driver uas
[ 1.825193] input: FTCS1000:01 2808:0101 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-FTCS1000:01/0018:2808:0101.0004/input/input12
[ 1.826862] input: FTCS1000:01 2808:0101 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-FTCS1000:01/0018:2808:0101.0004/input/input13
[ 1.828530] hid-multitouch 0018:2808:0101.0004: input,hidraw3: I2C HID v1.00 Mouse [FTCS1000:01 2808:0101] on i2c-FTCS1000:01
[ 1.831227] usb 3-8: new high-speed USB device number 3 using xhci_hcd
[ 1.974199] usb 3-8: New USB device found, idVendor=04f2, idProduct=b729, bcdDevice=27.39
[ 1.977525] usb 3-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.979973] usb 3-8: Product: Chicony USB2.0 Camera
[ 1.981026] usb 3-8: Manufacturer: CHICONY
[ 1.981970] usb 3-8: SerialNumber: 200901010001
[ 2.108121] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[ 2.254467] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[ 2.259243] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.296228] XFS (nvme1n1p3): Mounting V5 Filesystem
[ 2.305833] XFS (nvme1n1p3): Ending clean mount
[ 2.344992] dracut: Mounted root filesystem /dev/nvme1n1p3
[ 2.384918] dracut: Switching root
[ 2.735720] scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 2.736590] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.736791] sd 0:0:0:0: [sda] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)[code]
[ 2.738121] sd 0:0:0:0: [sda] Write Protect is off
[ 2.738666] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.738986] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.742276] sda: sda1 sda2
[ 2.743063] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.258666] Consider using thermal netlink events interface
[ 3.261655] input: Intel HID events as /devices/platform/INTC1051:00/input/input15
[ 3.265127] resource sanity check: requesting [mem 0xfedc0000-0xfedcffff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff]
[ 3.265132] caller 0xffffffffc05b37e3 mapping multiple BARs
[ 3.266118] ACPI: bus type thunderbolt registered
[ 3.266202] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
[ 3.266837] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 3.266915] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 3.267185] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.267186] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.267529] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.267726] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
[ 3.267744] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
[ 3.267745] EDAC igen6 MC1: ADDR 0x7fffffffe0
[ 3.267746] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
[ 3.267747] EDAC igen6 MC0: ADDR 0x7fffffffe0
[ 3.268062] EDAC igen6: v2.5.1
[ 3.268660] i2c i2c-2: 2/2 memory slots populated (from DMI)
[ 3.269934] i2c i2c-2: Successfully instantiated SPD at 0x50
[ 3.273571] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.275456] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 3.278120] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.281600] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.282093] mc: Linux media interface: v0.10
[ 3.282092] Bluetooth: Core ver 2.22
[ 3.282104] NET: Registered PF_BLUETOOTH protocol family
[ 3.282105] Bluetooth: HCI device and connection manager initialized
[ 3.282107] Bluetooth: HCI socket layer initialized
[ 3.282109] Bluetooth: L2CAP socket layer initialized
[ 3.282111] Bluetooth: SCO socket layer initialized
[ 3.283146] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.283161] Loading firmware: regulatory.db
[ 3.284278] Loading firmware: regulatory.db.p7s
[ 3.290454] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 3.332199] iTCO_vendor_support: vendor-support=0
[ 3.332644] intel_rapl_msr: PL4 support detected.
[ 3.334688] intel_rapl_common: Found RAPL domain package
[ 3.334690] intel_rapl_common: Found RAPL domain core
[ 3.334691] intel_rapl_common: Found RAPL domain uncore
[ 3.334692] intel_rapl_common: Found RAPL domain psys
[ 3.334740] ee1004 2-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 3.399691] intel_rapl_common: Found RAPL domain package
[ 3.400269] videodev: Linux video capture interface: v2.00
[ 3.401887] Intel(R) Wireless WiFi driver for Linux
[ 3.401893] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 3.402037] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.404036] usbcore: registered new interface driver btusb
[ 3.405247] Loading firmware: iwlwifi-so-a0-gf-a0-72.ucode
[ 3.405859] usb 3-8: Found UVC 1.10 device Chicony USB2.0 Camera (04f2:b729)
[ 3.406198] Bluetooth: hci0: Device revision is 0
[ 3.406200] Bluetooth: hci0: Secure boot is enabled
[ 3.406201] Bluetooth: hci0: OTP lock is enabled
[ 3.406201] Bluetooth: hci0: API lock is enabled
[ 3.406201] Bluetooth: hci0: Debug lock is disabled
[ 3.406202] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3.406203] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 3.406205] Loading firmware: intel/ibt-0040-0041.sfi
[ 3.406973] input: Chicony USB2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input17
[ 3.407004] usbcore: registered new interface driver uvcvideo
[ 3.408802] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[ 3.408814] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36
[ 3.409023] Loading firmware: iwl-debug-yoyo.bin
[ 3.409037] iwlwifi 0000:00:14.3: loaded firmware version 72.a764baac.0 so-a0-gf-a0-72.ucode op_mode iwlmvm
[ 3.409764] Bluetooth: hci0: Found device firmware: intel/ibt-0040-0041.sfi
[ 3.409816] Bluetooth: hci0: Boot Address: 0x100800
[ 3.409818] Bluetooth: hci0: Firmware Version: 151-42.23
[ 3.410300] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.410515] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.410567] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.410577] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.446640] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.446643] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.446644] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.446645] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.446645] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.447395] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 3.447438] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 3.447550] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 3.447592] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 3.452644] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 3.452742] Console: switching to colour dummy device 80x25
[ 3.452765] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.452798] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 3.453167] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.453550] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i9xx_always_on_power_well_ops [i915])
[ 3.453759] Loading firmware: i915/adlp_dmc_ver2_16.bin
[ 3.455932] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16)
[ 3.469452] Loading firmware: i915/adlp_guc_70.bin
[ 3.470070] Loading firmware: i915/tgl_huc.bin
[ 3.477266] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x370
[ 3.477307] thermal thermal_zone5: failed to read out thermal zone (-61)
[ 3.482432] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 3.564187] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.bin version 70.13.1
[ 3.564193] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin version 7.9.3
[ 3.565588] intel_tcc_cooling: Programmable TCC Offset detected
[ 3.572660] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 3.620311] i915 0000:00:02.0: [drm] HuC authenticated
[ 3.620949] i915 0000:00:02.0: [drm] GuC submission enabled
[ 3.620951] i915 0000:00:02.0: [drm] GuC SLPC enabled
[ 3.621455] i915 0000:00:02.0: [drm] GuC RC: enabled
[ 3.623083] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops tfp410_ops [i915])
[ 3.623137] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 3.648367] Loading firmware: iwlwifi-so-a0-gf-a0.pnvm
[ 3.649033] iwlwifi 0000:00:14.3: loaded PNVM version e28bb9d7
[ 3.664617] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
[ 3.734639] iwlwifi 0000:00:14.3: base HW address: 2c:0d:a7:6e:11:d0
[ 3.750125] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d4:93:90:1c:d4:d2
[ 3.750132] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 3.750365] e1000e 0000:00:1f.6 eth0: MAC: 15, PHY: 12, PBA No: FFFFFF-0FF
[ 3.752535] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[ 3.792025] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[/code] |
|
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 3:50 am Post subject: |
|
|
lspci -k output, says kernel module nouveau but I disabled it when installing the official nvidia driver?:
| Code: |
00:00.0 Host bridge: Intel Corporation Device 4621 (rev 02)
Subsystem: CLEVO/KAPOK Computer Device 866c
Kernel driver in use: igen6_edac
Kernel modules: igen6_edac
00:01.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x16 Controller #1 (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor PCI Express x16 Controller
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P GT2 [Iris Xe Graphics] (rev 0c)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P GT2 [Iris Xe Graphics]
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Alder Lake Innovation Platform Framework Processor Participant (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake Innovation Platform Framework Processor Participant
Kernel driver in use: proc_thermal_pci
Kernel modules: processor_thermal_device_pci
00:06.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x4 Controller #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor PCI Express x4 Controller
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 PCI Express Root Port
Kernel driver in use: pcieport
00:08.0 System peripheral: Intel Corporation 12th Gen Core Processor Gaussian & Neural Accelerator (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor Gaussian & Neural Accelerator
00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01)
Subsystem: CLEVO/KAPOK Computer Platform Monitoring Technology
Kernel driver in use: intel_vsec
Kernel modules: intel_vsec
00:0d.0 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 USB Controller (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 USB Controller
Kernel driver in use: xhci_hcd
00:0d.2 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 NHI
Kernel driver in use: thunderbolt
Kernel modules: thunderbolt
00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH USB 3.2 xHCI Host Controller
Kernel driver in use: xhci_hcd
00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Alder Lake-P PCH CNVi WiFi (rev 01)
Subsystem: Intel Corporation Wi-Fi 6E AX211 160MHz
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Serial IO I2C Controller
Kernel driver in use: intel-lpss
00:15.1 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #1 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Serial IO I2C Controller
Kernel driver in use: intel-lpss
00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH HECI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge: Intel Corporation Device 51bd (rev 01)
Subsystem: CLEVO/KAPOK Computer Device 866c
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Alder Lake PCI Express Root Port #9 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCI Express Root Port
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Alder Lake PCH eSPI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH eSPI Controller
00:1f.3 Audio device: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Alder Lake PCH-P High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_sof_pci_intel_tgl
00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH-P SMBus Host Controller
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P PCH SPI Controller
Kernel driver in use: intel-spi
Kernel modules: spi_intel_pci
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (16) I219-V (rev 01)
Subsystem: Intel Corporation Ethernet Connection (16) I219-V
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 VGA compatible controller: NVIDIA Corporation GA106M [GeForce RTX 3060 Mobile / Max-Q] (rev a1) <======= See here
Subsystem: CLEVO/KAPOK Computer GA106M [GeForce RTX 3060 Mobile / Max-Q]
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation GA106 High Definition Audio Controller (rev a1)
Subsystem: NVIDIA Corporation GA106 High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Non-Volatile memory controller: Phison Electronics Corporation E16 PCIe4 NVMe Controller (rev 01)
Subsystem: Phison Electronics Corporation E16 PCIe4 NVMe Controller
Kernel driver in use: nvme
Kernel modules: nvme
2c:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer SD/MMC Card Reader Controller
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
2d:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD Blue SN550 NVMe SSD (rev 01)
Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
Kernel driver in use: nvme
Kernel modules: nvme
|
Last edited by nzPenguin on Sun Jan 21, 2024 4:22 am; edited 1 time in total |
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 3:57 am Post subject: |
|
|
Eselect show manually configured kernel selected:
| Code: |
eselect kernel list
Available kernel symlink targets:
[1] linux-6.1.67-gentoo *
[2] linux-6.1.69-gentoo-dist
|
but dmesg indicates 6.1.69-gentoo-dist booted?:
| Code: |
[ 0.000000] Linux version 6.1.69-gentoo-dist (portage@localhost) (x86_64-pc-linux-gnu-gcc (Gentoo 13.2.1_p20230826 p7) 13.2.1 20230826, GNU ld (Gentoo 2.41 p4) 2.41.0) #1 SMP PREEMPT_DYNAMIC Fri Jan 12 11:41:55 NZDT 2024
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.69-gentoo-dist root=UUID=da0cc97f-43fa-4f24-897b-80329724ad23 ro
[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
|
|
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 4:03 am Post subject: |
|
|
Kernel Device Drivers --------> Graphic Support settings:
| Code: |
<M> /dev/agpgart (AGP Support) --->
│ │ [*] Laptop Hybrid Graphics - GPU switching support
│ │ <M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ----
│ │ [*] Enable legacy fbdev support for your modesetting driver
│ │ (100) Overallocation of the fbdev buffer
│ │ [ ] Allow to specify an EDID data set instead of probing for it
│ │ [ ] DRM DP AUX Interface
│ │ [*] Enable DisplayPort CEC-Tunneling-over-AUX HDMI support
│ │ I2C encoder or helper chips --->
│ │ ARM devices ----
│ │ < > ATI Radeon
│ │ < > AMD GPU
│ │ < > Nouveau (NVIDIA) cards
│ │ <M> Intel 8xx/9xx/G3x/G4x/HD Graphics
│ │ () Force probe i915 for selected Intel hardware IDs
│ │ [*] Enable capturing GPU state following a hang
│ │ [*] Compress GPU error state
│ │ [*] Always enable userptr support
│ │ < > Virtual GEM provider
│ │ < > Virtual KMS (EXPERIMENTAL)
│ │ < > DRM driver for VMware Virtual GPU
│ │ < > Intel GMA500/600/3600/3650 KMS Framebuffer
│ │ < > DisplayLink
│ │ < > AST server chips
│ │ < > Matrox G200
│ │ < > QXL virtual GPU
│ │ <M> Virtio GPU driver
│ │ Display Panels --->
│ │ Display Interface Bridges --->
│ │ < > ETNAVIV (DRM support for Vivante GPU IP cores)
│ │ < > DRM Support for bochs dispi vga interface (qemu stdvga)
│ │ < > Cirrus driver for QEMU emulated device
│ │ < > GM12U320 driver for USB projectors
│ │ < > Simple framebuffer driver
│ │ < > Virtual Box Graphics Card
│ │ < > GUD USB Display
│ │ < > DRM support for Solomon SSD130x OLED displays
│ │ [*] Enable legacy drivers (DANGEROUS) --->
│ │ Frame buffer Devices --->
|
|
|
| Back to top |
|
|
nzPenguin
n00b
Joined: 24 Feb 2012
Posts: 32
|
| Posted: Sun Jan 21, 2024 4:20 am Post subject: |
|
|
Booting the manually configured kernel from GRUB lspci -k output, seems to load correct modules but I lose WiFi (No time to test dual monitor functionality at this time will update when I do):
| Code: |
00:00.0 Host bridge: Intel Corporation Device 4621 (rev 02)
Subsystem: CLEVO/KAPOK Computer Device 866c
00:01.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x16 Controller #1 (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor PCI Express x16 Controller
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P GT2 [Iris Xe Graphics] (rev 0c)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P GT2 [Iris Xe Graphics]
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Alder Lake Innovation Platform Framework Processor Participant (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake Innovation Platform Framework Processor Participant
00:06.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x4 Controller #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor PCI Express x4 Controller
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 PCI Express Root Port
Kernel driver in use: pcieport
00:08.0 System peripheral: Intel Corporation 12th Gen Core Processor Gaussian & Neural Accelerator (rev 02)
Subsystem: CLEVO/KAPOK Computer 12th Gen Core Processor Gaussian & Neural Accelerator
00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01)
Subsystem: CLEVO/KAPOK Computer Platform Monitoring Technology
00:0d.0 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 USB Controller (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 USB Controller
Kernel driver in use: xhci_hcd
00:0d.2 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #0 (rev 02)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P Thunderbolt 4 NHI
Kernel driver in use: thunderbolt
00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH USB 3.2 xHCI Host Controller
Kernel driver in use: xhci_hcd
00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Shared SRAM
00:14.3 Network controller: Intel Corporation Alder Lake-P PCH CNVi WiFi (rev 01)
Subsystem: Intel Corporation Wi-Fi 6E AX211 160MHz
Kernel modules: iwlwifi
00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Serial IO I2C Controller
00:15.1 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #1 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH Serial IO I2C Controller
00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH HECI Controller
00:1c.0 PCI bridge: Intel Corporation Device 51bd (rev 01)
Subsystem: CLEVO/KAPOK Computer Device 866c
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Alder Lake PCI Express Root Port #9 (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCI Express Root Port
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Alder Lake PCH eSPI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH eSPI Controller
00:1f.3 Audio device: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Alder Lake PCH-P High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_sof_pci_intel_tgl
00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake PCH-P SMBus Host Controller
Kernel driver in use: i801_smbus
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer Alder Lake-P PCH SPI Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (16) I219-V (rev 01)
Subsystem: Intel Corporation Ethernet Connection (16) I219-V
Kernel driver in use: e1000e
01:00.0 VGA compatible controller: NVIDIA Corporation GA106M [GeForce RTX 3060 Mobile / Max-Q] (rev a1) <==== Seem to be booting correct modules?
Subsystem: CLEVO/KAPOK Computer GA106M [GeForce RTX 3060 Mobile / Max-Q]
Kernel modules: nvidia_drm, nvidia
01:00.1 Audio device: NVIDIA Corporation GA106 High Definition Audio Controller (rev a1)
Subsystem: NVIDIA Corporation GA106 High Definition Audio Controller
Kernel driver in use: snd_hda_intel
02:00.0 Non-Volatile memory controller: Phison Electronics Corporation E16 PCIe4 NVMe Controller (rev 01)
Subsystem: Phison Electronics Corporation E16 PCIe4 NVMe Controller
Kernel driver in use: nvme
2c:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer SD/MMC Card Reader Controller
2d:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD Blue SN550 NVMe SSD (rev 01)
Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
Kernel driver in use: nvme
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
