| View previous topic :: View next topic |
| Author |
Message |
P3nP3n
n00b
Joined: 21 Nov 2022
Posts: 5
|
 Posted: Mon Nov 21, 2022 8:46 am Post subject: [Current] Gnome 43 : Issues with Gnome applications |
 |
|
Hi everyone,
I've an issue with the last update who pushed Gnome 43.
I can launch gnome applications at start, but after that, it's impossible.
I try many things, like create a new profile, rebuild gnome dependencies, downgrading gnome-shell without success.
I checked the dmesg file, here's the output :
| Code: |
[ 5035.239987] pool-gnome-cont[8197]: segfault at 401 ip 00007fef8295f8f6 sp 00007fef71bedd40 error 4 in libglib-2.0.so.0.7400.1[7fef82909000+8f000]
[ 5035.240002] Code: 48 8b 0b 44 8d 78 ff 48 89 c5 4d 89 fe 49 c1 e6 04 4c 01 f1 4c 8b 21 4d 85 e4 0f 84 e4 00 00 00 49 8b 44 24 08 48 85 c0 74 4a <48> 8b 10 49 89 54 24 08 49 89 c4 48 8b 41 08 48 85 c0 75 26 66 0f
[ 5264.409157] pool-gnome-cont[8699]: segfault at 9500000095 ip 00007ff5a89e98f6 sp 00007ff58d4d5ed0 error 4 in libglib-2.0.so.0.7400.1[7ff5a8993000+8f000]
[ 5264.409172] Code: 48 8b 0b 44 8d 78 ff 48 89 c5 4d 89 fe 49 c1 e6 04 4c 01 f1 4c 8b 21 4d 85 e4 0f 84 e4 00 00 00 49 8b 44 24 08 48 85 c0 74 4a <48> 8b 10 49 89 54 24 08 49 89 c4 48 8b 41 08 48 85 c0 75 26 66 0f
[ 5302.451969] gnome-control-c[12241]: segfault at 0 ip 00007f3eb7eb59b0 sp 00007fff558846c8 error 4 in libglib-2.0.so.0.7400.1[7f3eb7e90000+8f000]
[ 5302.451985] Code: 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec 08 e8 27 ad fd ff 85 c0 0f 94 c0 48 83 c4 08 0f b6 c0 c3 66 2e 0f 1f 84 00 00 00 00 00 <0f> be 17 b8 05 15 00 00 84 d2 74 1c 0f 1f 40 00 89 c1 48 ff c7 c1
[ 5328.066539] pool-gnome-cont[13319]: segfault at 0 ip 00007fecfae47cb0 sp 00007fecc4ff80a0 error 4 in libglib-2.0.so.0.7400.1[7fecfadf2000+8f000]
[ 5328.066554] Code: 4a 89 2c e0 48 8b 05 0f 89 0c 00 31 ed 8b 0d 1f 89 0c 00 4a 8b 04 e0 4c 8b 60 08 eb 66 0f 1f 44 00 00 49 8b 44 24 08 48 8b 16 <48> 8b 30 48 8b 52 08 48 8b 36 48 89 56 08 48 89 42 08 49 8b 14 24
[ 5334.280252] gnome-control-c[13347]: segfault at 6c0000006c ip 00007f77b14d88f6 sp 00007ffd4ff9b5a0 error 4 in libglib-2.0.so.0.7400.1[7f77b1482000+8f000]
[ 5334.280271] Code: 48 8b 0b 44 8d 78 ff 48 89 c5 4d 89 fe 49 c1 e6 04 4c 01 f1 4c 8b 21 4d 85 e4 0f 84 e4 00 00 00 49 8b 44 24 08 48 85 c0 74 4a <48> 8b 10 49 89 54 24 08 49 89 c4 48 8b 41 08 48 85 c0 75 26 66 0f
[ 5413.986736] gnome-control-c[15513]: segfault at 7fbd0000000c ip 00007fbdfe8da8f6 sp 00007ffd30a44030 error 4 in libglib-2.0.so.0.7400.1[7fbdfe884000+8f000]
[ 5413.986754] Code: 48 8b 0b 44 8d 78 ff 48 89 c5 4d 89 fe 49 c1 e6 04 4c 01 f1 4c 8b 21 4d 85 e4 0f 84 e4 00 00 00 49 8b 44 24 08 48 85 c0 74 4a <48> 8b 10 49 89 54 24 08 49 89 c4 48 8b 41 08 48 85 c0 75 26 66 0f
[ 5422.703262] gnome-control-c[15570]: segfault at 400800000455 ip 00007f95173148f6 sp 00007ffff1311ad0 error 4 in libglib-2.0.so.0.7400.1[7f95172be000+8f000]
[ 5422.703278] Code: 48 8b 0b 44 8d 78 ff 48 89 c5 4d 89 fe 49 c1 e6 04 4c 01 f1 4c 8b 21 4d 85 e4 0f 84 e4 00 00 00 49 8b 44 24 08 48 85 c0 74 4a <48> 8b 10 49 89 54 24 08 49 89 c4 48 8b 41 08 48 85 c0 75 26 66 0f
|
grep -i libglib /var/log/messages
| Code: |
1 Nov 19 23:28:07 MSI-GE70-2PC kernel: pool-gnome-cont[9476]: segfault at fa ip 00007f6ad7f6f8f6 sp 00007f6abccd4ef0 error 4 in libglib-2.0.so.0.7400.1[7f6ad7f19000+8f000]
2 Nov 19 23:28:12 MSI-GE70-2PC kernel: pool-gnome-cont[9530]: segfault at 2 ip 00007fc4cd1c98f6 sp 00007fc4b14c4f90 error 4 in libglib-2.0.so.0.7400.1[7fc4cd173000+8f000]
3 Nov 19 23:28:29 MSI-GE70-2PC kernel: pool-gnome-cont[9624]: segfault at 6 ip 00007f2a83f508f6 sp 00007f2a47fedd30 error 4 in libglib-2.0.so.0.7400.1[7f2a83efa000+8f000]
4 Nov 20 09:44:53 MSI-GE70-2PC kernel: gnome-control-c[13396]: segfault at 0 ip 00007eff747ec9b0 sp 00007ffe9db49f18 error 4 in libglib-2.0.so.0.7400.1[7eff747c7000+8f000]
5 Nov 20 09:44:59 MSI-GE70-2PC kernel: pool-gnome-cont[13479]: segfault at 5b ip 00007fe3dbdf38f6 sp 00007fe3b8dbeef0 error 4 in libglib-2.0.so.0.7400.1[7fe3dbd9d000+8f000]
6 Nov 20 09:46:36 MSI-GE70-2PC kernel: gnome-control-c[13502]: segfault at 0 ip 00007fb6ea2869b0 sp 00007ffef42e1528 error 4 in libglib-2.0.so.0.7400.1[7fb6ea261000+8f000]
7 Nov 20 09:52:17 MSI-GE70-2PC kernel: gnome-control-c[14500]: segfault at 0 ip 00007faae25589b0 sp 00007ffc84df0118 error 4 in libglib-2.0.so.0.7400.1[7faae2533000+8f000]
8 Nov 20 09:52:22 MSI-GE70-2PC kernel: gnome-control-c[14552]: segfault at 0 ip 00007fa51b88a9b0 sp 00007fff15f601e8 error 4 in libglib-2.0.so.0.7400.1[7fa51b865000+8f000]
9 Nov 20 09:52:31 MSI-GE70-2PC kernel: gnome-control-c[14598]: segfault at 0 ip 00007f33be59d9b0 sp 00007ffc0a39cb28 error 4 in libglib-2.0.so.0.7400.1[7f33be578000+8f000]
10 Nov 20 12:13:17 MSI-GE70-2PC kernel: pool-gnome-cont[8197]: segfault at 401 ip 00007fef8295f8f6 sp 00007fef71bedd40 error 4 in libglib-2.0.so.0.7400.1[7fef82909000+8f000]
11 Nov 20 12:17:06 MSI-GE70-2PC kernel: pool-gnome-cont[8699]: segfault at 9500000095 ip 00007ff5a89e98f6 sp 00007ff58d4d5ed0 error 4 in libglib-2.0.so.0.7400.1[7ff5a8993000+8f000]
12 Nov 20 12:17:44 MSI-GE70-2PC kernel: gnome-control-c[12241]: segfault at 0 ip 00007f3eb7eb59b0 sp 00007fff558846c8 error 4 in libglib-2.0.so.0.7400.1[7f3eb7e90000+8f000]
13 Nov 20 12:18:10 MSI-GE70-2PC kernel: pool-gnome-cont[13319]: segfault at 0 ip 00007fecfae47cb0 sp 00007fecc4ff80a0 error 4 in libglib-2.0.so.0.7400.1[7fecfadf2000+8f000]
14 Nov 20 12:18:16 MSI-GE70-2PC kernel: gnome-control-c[13347]: segfault at 6c0000006c ip 00007f77b14d88f6 sp 00007ffd4ff9b5a0 error 4 in libglib-2.0.so.0.7400.1[7f77b1482000+8f000]
15 Nov 20 12:19:36 MSI-GE70-2PC kernel: gnome-control-c[15513]: segfault at 7fbd0000000c ip 00007fbdfe8da8f6 sp 00007ffd30a44030 error 4 in libglib-2.0.so.0.7400.1[7fbdfe884000+8f000]
16 Nov 20 12:19:45 MSI-GE70-2PC kernel: gnome-control-c[15570]: segfault at 400800000455 ip 00007f95173148f6 sp 00007ffff1311ad0 error 4 in libglib-2.0.so.0.7400.1[7f95172be000+8f000]
17 Nov 21 08:50:01 MSI-GE70-2PC kernel: gnome-control-c[7728]: segfault at 0 ip 00007f71813d99b0 sp 00007ffedbe7eea8 error 4 in libglib-2.0.so.0.7400.1[7f71813b4000+8f000]
18 Nov 21 08:50:06 MSI-GE70-2PC kernel: gnome-control-c[7782]: segfault at 0 ip 00007f2f241df9b0 sp 00007ffe5eead718 error 4 in libglib-2.0.so.0.7400.1[7f2f241ba000+8f000]
19 Nov 21 08:51:03 MSI-GE70-2PC kernel: gnome-control-c[7901]: segfault at 7200000054 ip 00007f4e4ba668f6 sp 00007ffdee6e9510 error 4 in libglib-2.0.so.0.7400.1[7f4e4ba10000+8f000]
20 Nov 21 09:17:22 MSI-GE70-2PC kernel: pool-gnome-cont[29020]: segfault at 12300000123 ip 00007fe6eedffbd9 sp 00007fe6de8280a0 error 4 in libglib-2.0.so.0.7400.1[7fe6eedaa000+8f000]
21 Nov 21 09:28:21 MSI-GE70-2PC kernel: gnome-control-c[4849]: segfault at 6d0000006d ip 00007f6c4a1458f6 sp 00007ffef332b240 error 4 in libglib-2.0.so.0.7400.1[7f6c4a0ef000+8f000]
22 Nov 21 15:42:07 MSI-GE70-2PC kernel: gnome-control-c[9497]: segfault at 0 ip 00007f6f5ff6c9b0 sp 00007ffe9c866308 error 4 in libglib-2.0.so.0.7400.1[7f6f5ff47000+8f000]
23 Nov 21 17:21:21 MSI-GE70-2PC kernel: gnome-text-edit[9315]: segfault at 0 ip 00007f46fdb7a9b0 sp 00007ffd5d5868d8 error 4 in libglib-2.0.so.0.7400.1[7f46fdb55000+8f000]
24 Nov 21 17:43:24 MSI-GE70-2PC kernel: gnome-text-edit[9435]: segfault at 0 ip 00007f02cac259b0 sp 00007ffc94247708 error 4 in libglib-2.0.so.0.7400.1[7f02cac00000+8f000]
25 Nov 21 23:36:06 MSI-GE70-2PC kernel: gnome-control-c[24266]: segfault at 0 ip 00007f05e38979b0 sp 00007ffc8d20b708 error 4 in libglib-2.0.so.0.7400.1[7f05e3872000+8f000]
26 Nov 21 23:36:11 MSI-GE70-2PC kernel: gnome-control-c[24315]: segfault at 0 ip 00007f4f7dedf9b0 sp 00007ffe6a3e7de8 error 4 in libglib-2.0.so.0.7400.1[7f4f7deba000+8f000]
|
find / -iname "*.so.*" | grep -i libglib
| Code: |
/usr/lib64/libglib-2.0.so.0.7400.1
/usr/lib64/libglib-2.0.so.0
find: ‘/run/user/1002/doc’/usr/share/gdb/auto-load/usr/lib64/libglib-2.0.so.0.7400.1-gdb.py
|
ls -lha /usr/lib64/libglib-2.0.so
| Code: | | lrwxrwxrwx 1 root root 16 21 nov. 23:56 /usr/lib64/libglib-2.0.so -> libglib-2.0.so.0 |
It seems it's a problem with glib libraries, but i can't resolve the issue by myself.
Fun fact, the applications start if I launch them with the terminal (nautilus won't crash, but gnome-control-center yes).
if I run the gnome text editor through the terminal (while the icon does not allow launching), the following messages appears. I don't know if it's relevant.
| Code: |
(gnome-text-editor:9435): GLib-GIO-CRITICAL **: 17:24:39.059: g_dbus_connection_emit_signal: assertion 'object_path != NULL && g_variant_is_object_path (object_path)' failed
|
If someone has the same problem, or a solution for it, i would be grateful.
Thanks for the help.
Additional infos :
| Code: |
Portage 3.0.38.1 (python 3.10.8-final-0, default/linux/amd64/17.1/desktop/gnome, gcc-11.3.0, glibc-2.36-r5, 5.15.75-gentoo x86_64)
=================================================================
System uname: Linux-5.15.75-gentoo-x86_64-Intel-R-_Core-TM-_i5-4210H_CPU_@_2.90GHz-with-glibc2.36
KiB Mem: 8073092 total, 6860088 free
KiB Swap: 4194300 total, 4194300 free
Timestamp of repository gentoo: Sun, 20 Nov 2022 13:30:01 +0000
Head commit of repository gentoo: 9b6a50314506798fce70a44e8dc22680b1879917
sh bash 5.1_p16-r2
ld GNU ld (Gentoo 2.38 p4) 2.38
app-misc/pax-utils: 1.3.5::gentoo
app-shells/bash: 5.1_p16-r2::gentoo
dev-lang/perl: 5.34.1-r4::gentoo
dev-lang/python: 3.10.8_p3::gentoo, 3.11.0_p2::gentoo
dev-lang/rust: 1.65.0::gentoo
dev-util/cmake: 3.24.2::gentoo
dev-util/meson: 0.63.2-r1::gentoo
sys-apps/baselayout: 2.9::gentoo
sys-apps/openrc: 0.45.2-r1::gentoo
sys-apps/sandbox: 2.29::gentoo
sys-devel/autoconf: 2.13-r2::gentoo, 2.71-r1::gentoo
sys-devel/automake: 1.16.5::gentoo
sys-devel/binutils: 2.38-r2::gentoo
sys-devel/binutils-config: 5.4.1::gentoo
sys-devel/clang: 15.0.3::gentoo
sys-devel/gcc: 11.3.0::gentoo
sys-devel/gcc-config: 2.8::gentoo
sys-devel/libtool: 2.4.7::gentoo
sys-devel/lld: 15.0.3::gentoo
sys-devel/llvm: 14.0.6-r2::gentoo, 15.0.3::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 5.15-r3::gentoo (virtual/os-headers)
sys-libs/glibc: 2.36-r5::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-verify-jobs: 1
sync-rsync-extra-opts:
sync-rsync-verify-max-age: 24
sync-rsync-verify-metamanifest: yes
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=haswell -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-march=haswell -O2 -pipe"
DISTDIR="/var/cache/distfiles"
EMERGE_DEFAULT_OPTS=" --quiet-build=y"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR XDG_STATE_HOME"
FCFLAGS="-march=haswell -O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs buildpkg-live config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-march=haswell -O2 -pipe"
GENTOO_MIRRORS="https://mirrors.ircam.fr/pub/gentoo-distfiles/"
LANG="fr_FR.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j4"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
SHELL="/bin/bash"
USE="X a52 aac acl acpi alsa amd64 branding bzip2 cairo cdda cdr cli colord crypt cups dbus dri dts dvd dvdr eds elogind encode evo exif flac fortran gdbm gif gnome gnome-keyring gnome-online-accounts gpm gstreamer gtk gui iconv icu initramfs introspection jpeg lcms libglvnd libnotify libsecret libtirpc mad mng mp3 mp4 mpeg mtp multilib nautilus ncurses networkmanager nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds pulseaudio python readline sdl seccomp spell split-usr ssl startup-notification svg sysprof test-rust tiff truetype udev udisks unicode upower usb vorbis wayland wxwidgets x264 xattr xcb xml xv xvid zlib" ABI_X86="64" ADA_TARGET="gnat_2021" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 f16c fma3 mmx mmxext pclmul popcnt rdrand sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux" L10N="fr" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-4 php8-0" POSTGRES_TARGETS="postgres12 postgres13" PYTHON_SINGLE_TARGET="python3_10" PYTHON_TARGETS="python3_10" RUBY_TARGETS="ruby27" USERLAND="GNU" VIDEO_CARDS="intel i965 nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: ADDR2LINE, AR, ARFLAGS, AS, ASFLAGS, CC, CCLD, CONFIG_SHELL, CPP, CPPFLAGS, CTARGET, CXX, CXXFILT, ELFEDIT, EXTRA_ECONF, F77FLAGS, FC, GCOV, GPROF, INSTALL_MASK, LC_ALL, LD, LEX, LFLAGS, LIBTOOL, LINGUAS, MAKE, MAKEFLAGS, NM, OBJCOPY, OBJDUMP, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RANLIB, READELF, RUSTFLAGS, SIZE, STRINGS, STRIP, YACC, YFLAGS
|
Last edited by P3nP3n on Tue Nov 29, 2022 3:29 pm; edited 1 time in total |
|
| Back to top |
|
 |
P3nP3n
n00b
Joined: 21 Nov 2022
Posts: 5
|
| Posted: Tue Nov 29, 2022 10:19 am Post subject: |
|
|
To those who will read, i can't find a solution.
I've read the logs, deactivate all extensions, try with a new user account, recompile my entire system, recreated a kernel file from scratch, even did a fresh install, but the problem persists.
I don't know if the problem will be solved by a future update (which I hope it will). I'll give it a month in case an update fixes it, otherwise I'll have to change distribution unfortunately. I don't want to login in/log out every 30 minutes.
Thanks to those who took the time to read. |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21607
|
| Posted: Tue Nov 29, 2022 1:39 pm Post subject: |
|
|
| Why does logging in and out help? If you use a simpler environment, such as XFCE, is that stable? When an application crashes, what does the backtrace show? You may need to rebuild with debugging symbols before collecting the backtrace. |
|
| Back to top |
|
|
P3nP3n
n00b
Joined: 21 Nov 2022
Posts: 5
|
| Posted: Tue Nov 29, 2022 3:28 pm Post subject: |
|
|
| Hu wrote: | | Why does logging in and out help? If you use a simpler environment, such as XFCE, is that stable? When an application crashes, what does the backtrace show? You may need to rebuild with debugging symbols before collecting the backtrace. |
I haven't tried with XFCE. I will do the test tonight.
Log out/log in again to re-launch the applications.
I rebuild gnome-control-center with "debug" USE flag, so i must wait for the issue occurs. When it will done, i post here the output.
I found that the whole desktop environment is not working because, after trying to restart Gnome by pressing "ALT-F2" and "r" (under Xorg), it freezes completely. Always with "ALT-F2" prompt, i can launch Gnome-control-manager and Nautilus but not Gnome-terminal when "bugged". |
|
| Back to top |
|
|
P3nP3n
n00b
Joined: 21 Nov 2022
Posts: 5
|
| Posted: Wed Nov 30, 2022 8:12 am Post subject: |
|
|
Hi,
Here the logs for gnome-control-center with -debug flag :
| Code: |
gnome-control-center -v
network-cc-panel-LOG-0x100: 17:54:29.842: MSG: update_panel_visibility():103: Updating Wi-Fi panel visibility
cc-wwan-panel-LOG-0x100: 17:54:29.844: MSG: wwan_update_panel_visibility():768: Updating WWAN panel visibility
cc-panel-list-LOG-0x100: 17:54:29.870: ENTRY: switch_to_view():171
cc-panel-list-LOG-0x100: 17:54:29.870: EXIT: switch_to_view():174
cc-window-LOG-0x100: 17:54:29.870: ENTRY: set_active_panel_from_id():379
cc-window-LOG-0x100: 17:54:29.870: ENTRY: activate_panel():140
(gnome-control-center:15814): dconf-WARNING **: 17:54:29.870: failed to commit changes to dconf: Could not connect: No such file or directory
(gnome-control-center:15814): power-cc-panel-WARNING **: 17:54:29.900: session bus not available: Could not connect: No such file or directory
cc-window-LOG-0x100: 17:54:29.924: EXIT: activate_panel():180
cc-window-LOG-0x100: 17:54:29.924: MSG: set_active_panel_from_id():438: Current panel id: power
cc-panel-list-LOG-0x100: 17:54:29.924: ENTRY: switch_to_view():171
cc-panel-list-LOG-0x100: 17:54:29.924: EXIT: switch_to_view():174
cc-window-LOG-0x100: 17:54:29.924: ENTRY: set_active_panel_from_id():379
cc-window-LOG-0x100: 17:54:29.924: EXIT: set_active_panel_from_id():390
cc-window-LOG-0x100: 17:54:29.924: ENTRY: update_headerbar_buttons():350
cc-window-LOG-0x100: 17:54:29.924: ENTRY: update_list_title():234
cc-window-LOG-0x100: 17:54:29.924: EXIT: update_list_title():265
cc-window-LOG-0x100: 17:54:29.924: EXIT: update_headerbar_buttons():360
cc-window-LOG-0x100: 17:54:29.924: EXIT: set_active_panel_from_id():444
cc-window-LOG-0x100: 17:54:29.924: ENTRY: update_headerbar_buttons():350
cc-window-LOG-0x100: 17:54:29.924: ENTRY: update_list_title():234
cc-window-LOG-0x100: 17:54:29.924: EXIT: update_list_title():265
cc-window-LOG-0x100: 17:54:29.924: EXIT: update_headerbar_buttons():360
17:54:30.0136 diagnostics-cc-panel: DEBUG: ABRT vanished
17:54:30.0136 power-cc-panel: DEBUG: ALS enabled: on
17:54:35.0612 cc-panel-list: TRACE: ENTRY: switch_to_view():171
17:54:35.0612 cc-panel-list: TRACE: EXIT: switch_to_view():174
17:54:35.0612 cc-window: TRACE: ENTRY: set_active_panel_from_id():379
17:54:35.0612 cc-window: TRACE: ENTRY: activate_panel():140
(gnome-control-center:15814): dconf-DEBUG: 17:54:35.612: change_fast
(gnome-control-center:15814): dconf-DEBUG: 17:54:35.612: change_notify: /org/gnome/control-center/last-panel
(gnome-control-center:15814): dconf-WARNING **: 17:54:35.612: failed to commit changes to dconf: Could not connect: No such file or directory
(gnome-control-center:15814): dconf-DEBUG: 17:54:35.612: change_notify: /org/gnome/control-center/last-panel
17:54:35.0638 cc-object-storage: DEBUG: Asynchronously creating D-Bus proxy for CcObjectStorage::dbus-proxy(org.gnome.Shell,/org/gnome/Shell,org.gnome.Shell)
17:54:35.0639 info-overview-cc-panel: DEBUG: Unable to retrieve org.freedesktop.hostname1.HardwareVendor property
17:54:35.0653 info-overview-cc-panel: DEBUG: Unable to retrieve net.hadess.SwitcherooControl.GPUs property, the daemon is likely not running
17:54:35.0653 info-overview-cc-panel: WARNING: Unable to connect to create a proxy for org.gnome.SessionManager: Could not connect: No such file or directory
17:54:35.0653 info-overview-cc-panel: DEBUG: About to launch '/usr/libexec/gnome-control-center-print-renderer'
17:54:35.0653 info-overview-cc-panel: DEBUG: No additional environment variables
17:54:35.0840 info-overview-cc-panel: DEBUG: Failed to get property 'Virtualization': GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.systemd1 was not provided by any .service files
17:54:35.0844 cc-window: TRACE: ENTRY: on_stack_transition_running_changed_cb():599
17:54:35.0844 cc-window: TRACE: EXIT: on_stack_transition_running_changed_cb():606
17:54:35.0844 cc-window: DEBUG: Time to open panel 'About': 0.231897s
17:54:35.0844 cc-window: TRACE: EXIT: activate_panel():180
17:54:35.0844 cc-window: DEBUG: Added 'power' to the previous panels
17:54:35.0844 cc-window: TRACE: MSG: set_active_panel_from_id():438: Current panel id: info-overview
17:54:35.0844 cc-panel-list: TRACE: ENTRY: switch_to_view():171
17:54:35.0844 cc-panel-list: TRACE: EXIT: switch_to_view():174
17:54:35.0844 cc-window: TRACE: ENTRY: set_active_panel_from_id():379
17:54:35.0845 cc-window: TRACE: EXIT: set_active_panel_from_id():390
17:54:35.0845 cc-window: TRACE: ENTRY: update_headerbar_buttons():350
17:54:35.0845 cc-window: TRACE: ENTRY: update_list_title():234
17:54:35.0845 cc-window: TRACE: EXIT: update_list_title():265
17:54:35.0845 cc-window: TRACE: EXIT: update_headerbar_buttons():360
17:54:35.0845 cc-window: TRACE: EXIT: set_active_panel_from_id():444
17:54:35.0845 cc-object-storage: DEBUG: Finished creating D-Bus proxy for CcObjectStorage::dbus-proxy(org.gnome.Shell,/org/gnome/Shell,org.gnome.Shell)
17:54:35.0845 info-overview-cc-panel: WARNING: Failed to contact gnome-shell: (null)
17:54:36.0087 cc-window: TRACE: ENTRY: on_stack_transition_running_changed_cb():599
(gnome-control-center:15814): dconf-DEBUG: 17:54:36.088: unwatch_fast: "/org/gnome/desktop/session/" (active: 1, establishing: 0)
(gnome-control-center:15814): dconf-DEBUG: 17:54:36.091: unwatch_fast: "/org/gnome/settings-daemon/plugins/power/" (active: 1, establishing: 0)
(gnome-control-center:15814): dconf-DEBUG: 17:54:36.092: unwatch_fast: "/org/gnome/desktop/interface/" (active: 3, establishing: 0)
17:54:36.0093 cc-window: TRACE: EXIT: on_stack_transition_running_changed_cb():606
17:54:41.0129 cc-panel-list: TRACE: ENTRY: switch_to_view():171
17:54:41.0129 cc-panel-list: TRACE: EXIT: switch_to_view():174
17:54:41.0129 cc-window: TRACE: ENTRY: set_active_panel_from_id():379
17:54:41.0129 cc-window: TRACE: ENTRY: activate_panel():140
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.129: change_fast
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.129: change_notify: /org/gnome/control-center/last-panel
(gnome-control-center:15814): dconf-WARNING **: 17:54:41.129: failed to commit changes to dconf: Could not connect: No such file or directory
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.129: change_notify: /org/gnome/control-center/last-panel
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.135: watch_fast: "/org/gnome/desktop/interface/" (establishing: 0, active: 2)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.135: watch_fast: "/org/gtk/settings/file-chooser/" (establishing: 0, active: 0)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.135: watch_established: "/org/gtk/settings/file-chooser/" (establishing: 1)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.159: watch_fast: "/org/gnome/system/location/" (establishing: 0, active: 0)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.159: watch_established: "/org/gnome/system/location/" (establishing: 1)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.172: watch_fast: "/org/gnome/desktop/datetime/" (establishing: 0, active: 0)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.172: watch_fast: "/org/gnome/desktop/interface/" (establishing: 0, active: 3)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.172: watch_established: "/org/gnome/desktop/datetime/" (establishing: 1)
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.172: watch_fast: "/org/gnome/desktop/interface/" (establishing: 0, active: 4)
17:54:41.0172 GnomeDesktop: DEBUG: clock_format: 24h
17:54:41.0172 GnomeDesktop: DEBUG: show_weekday: TRUE
17:54:41.0172 GnomeDesktop: DEBUG: show_full_date: TRUE
17:54:41.0172 GnomeDesktop: DEBUG: show_seconds: FALSE
17:54:41.0172 GnomeDesktop: DEBUG: format_string: %a %b %-e_%R
17:54:41.0172 GnomeDesktop: DEBUG: no_enspace: %a %b %-e_%R
17:54:41.0172 GnomeDesktop: DEBUG: replaced_format: Tue Nov 29_17:54
17:54:41.0172 GnomeDesktop: DEBUG: is_utf8: FALSE
17:54:41.0172 GnomeDesktop: DEBUG: ret: Tue Nov 29 17:54
17:54:41.0003 datetime-cc-panel: WARNING: Timezone '' is unhandled, setting Europe/London as default
(gnome-control-center:15814): dconf-DEBUG: 17:54:41.004: watch_fast: "/org/gtk/settings/file-chooser/" (establishing: 0, active: 1)
17:54:41.0005 cc-window: TRACE: ENTRY: on_stack_transition_running_changed_cb():599
17:54:41.0005 cc-window: TRACE: EXIT: on_stack_transition_running_changed_cb():606
17:54:41.0005 cc-window: DEBUG: Time to open panel 'Date & Time': 0.055961s
17:54:41.0005 cc-window: TRACE: EXIT: activate_panel():180
17:54:41.0005 cc-window: DEBUG: Added 'info-overview' to the previous panels
17:54:41.0005 cc-window: TRACE: MSG: set_active_panel_from_id():438: Current panel id: datetime
17:54:41.0005 cc-panel-list: TRACE: ENTRY: switch_to_view():171
17:54:41.0005 cc-panel-list: TRACE: EXIT: switch_to_view():174
17:54:41.0005 cc-window: TRACE: ENTRY: set_active_panel_from_id():379
17:54:41.0005 cc-window: TRACE: EXIT: set_active_panel_from_id():390
17:54:41.0005 cc-window: TRACE: ENTRY: update_headerbar_buttons():350
17:54:41.0005 cc-window: TRACE: ENTRY: update_list_title():234
17:54:41.0005 cc-window: TRACE: EXIT: update_list_title():265
17:54:41.0005 cc-window: TRACE: EXIT: update_headerbar_buttons():360
17:54:41.0005 cc-window: TRACE: EXIT: set_active_panel_from_id():444
17:54:41.0005 GnomeDesktop: DEBUG: clock_format: 24h
17:54:41.0005 GnomeDesktop: DEBUG: show_weekday: TRUE
17:54:41.0005 GnomeDesktop: DEBUG: show_full_date: TRUE
17:54:41.0005 GnomeDesktop: DEBUG: show_seconds: FALSE
17:54:41.0005 GnomeDesktop: DEBUG: format_string: %a %b %-e_%R
17:54:41.0005 GnomeDesktop: DEBUG: no_enspace: %a %b %-e_%R
17:54:41.0005 GnomeDesktop: DEBUG: replaced_format: Tue Nov 29_17:54
17:54:41.0005 GnomeDesktop: DEBUG: is_utf8: FALSE
17:54:41.0005 GnomeDesktop: DEBUG: ret: Tue Nov 29 17:54
Segmentation fault
|
I found something, but i don't think it's relevant here. On my other computer (Gentoo too), the issue isn't here and the same messages are present. When i checked the file "/var/log/portage/elog/summary.log", several warnings have been here, like :
| Code: |
>>> Messages generated by process 16294 on 2022-11-21 01:28:42 CET for package x11-libs/gtk+-3.24.34-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/usr/include/glib-2.0/glib/gatomic.h:131:5: warning: argument 2 of '__atomic_load' discards 'volatile' qualifier [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/gtk/gtklabel.c:4235:32: warning: passing argument 1 of 'gtk_widget_queue_resize' from incompatible pointer type [-Wincompatible-pointer-types]
/usr/include/glib-2.0/glib/gatomic.h:131:5: warning: argument 2 of '__atomic_load' discards 'volatile' qualifier [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:197:79: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:242:87: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:245:56: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:255:83: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://www.gtk.org/
>>> Messages generated by process 14329 on 2022-11-22 12:40:53 CET for package dev-libs/icu-71.1-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
cc1plus: warning: function may return address of local variable [-Wreturn-local-addr]
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned int*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSe>
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned char*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantS>
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned int*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSe>
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned char*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantS>
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://icu.unicode.org/
>>> Messages generated by process 14329 on 2022-11-22 20:40:01 CET for package dev-libs/libcdio-paranoia-2.0.1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1325:57: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1328:57: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1331:58: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1334:58: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1360:53: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1363:53: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1366:54: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
/var/tmp/portage/dev-libs/libcdio-paranoia-2.0.1/work/libcdio-paranoia-10.2+2.0.1/src/cd-paranoia.c:1369:54: warning: argument to ‘sizeof’ in ‘strncat’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://www.gnu.org/software/libcdio/
>>> Messages generated by process 14329 on 2022-11-22 23:55:10 CET for package sys-devel/llvm-14.0.6-r2:
LOG: postinst
You can find additional opt-viewer utility scripts in:
/usr/lib/llvm/14/share/opt-viewer
To use these scripts, you will need Python along with the following
packages:
dev-python/pygments (for opt-viewer)
dev-python/pyyaml (for all of them)
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:130:15: warning: array subscript 2 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:139:15: warning: array subscript 4294967295 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:130:15: warning: array subscript 2 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:139:15: warning: array subscript 4294967295 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:130:15: warning: array subscript 2 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:139:15: warning: array subscript 4294967295 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
/var/tmp/portage/sys-devel/llvm-14.0.6-r2/work/llvm/include/llvm/ADT/SparseBitVector.h:130:15: warning: array subscript 2 is above array bounds of ‘const BitWord [2]’ {aka ‘const long unsigned int [2]’} [-Warray-bounds]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://llvm.org/
>>> Messages generated by process 14329 on 2022-11-23 02:41:24 CET for package x11-libs/cairo-1.16.0-r6:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/var/tmp/portage/x11-libs/cairo-1.16.0-r6/work/cairo-1.16.0/src/cairo-recording-surface.c:248:5: warning: 'free' called on pointer 'surface' with nonzero offset 432 [-Wfree-nonheap-object]
/var/tmp/portage/x11-libs/cairo-1.16.0-r6/work/cairo-1.16.0/src/cairo-truetype-subset.c:1402:35: warning: array subscript 'tt_cmap_t {aka struct _tt_cmap}[0]' is partly outside array bounds of 'char[4]' [-Warray-bounds]
/var/tmp/portage/x11-libs/cairo-1.16.0-r6/work/cairo-1.16.0/src/cairo-truetype-subset.c:1295:25: warning: array subscript 'tt_segment_map_t {aka struct _segment_map}[0]' is partly outside array bounds of 'char[4]' [-Warray-bounds]
/var/tmp/portage/x11-libs/cairo-1.16.0-r6/work/cairo-1.16.0/src/cairo-truetype-subset.c:1298:28: warning: array subscript 'tt_segment_map_t {aka struct _segment_map}[0]' is partly outside array bounds of 'char[4]' [-Warray-bounds]
/usr/include/glib-2.0/glib/gatomic.h:131:5: warning: argument 2 of '__atomic_load' discards 'volatile' qualifier [-Wincompatible-pointer-types]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://www.cairographics.org/ https://gitlab.freedesktop.org/cairo/cairo
>>> Messages generated by process 14329 on 2022-11-23 03:14:16 CET for package x11-libs/gtk+-3.24.34-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/usr/include/glib-2.0/glib/gatomic.h:131:5: warning: argument 2 of '__atomic_load' discards 'volatile' qualifier [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/gtk/gtklabel.c:4235:32: warning: passing argument 1 of 'gtk_widget_queue_resize' from incompatible pointer type [-Wincompatible-pointer-types]
/usr/include/glib-2.0/glib/gatomic.h:131:5: warning: argument 2 of '__atomic_load' discards 'volatile' qualifier [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:197:79: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:242:87: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:245:56: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
/var/tmp/portage/x11-libs/gtk+-3.24.34-r1/work/gtk+-3.24.34/tests/testinput.c:255:83: warning: passing argument 1 of ‘gdk_event_get_source_device’ from incompatible pointer type [-Wincompatible-pointer-types]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://www.gtk.org/
>>> Messages generated by process 14329 on 2022-11-23 06:48:45 CET for package dev-libs/zziplib-0.13.72-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/zzip/fetch.h:230:43: warning: initialization of ‘struct zzip_extra_zip64 *’ from incompatible pointer type ‘char *’ [-Wincompatible-pointer-types]
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:57:17: warning: assignment to ‘size_t (*)(struct SDL_RWops *, void *, size_t, size_t)’ {aka ‘long unsigned int (*)(struct SDL_RWops *, void *, long unsigned int, long unsigned int)’} from i>
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:58:18: warning: assignment to ‘size_t (*)(struct SDL_RWops *, const void *, size_t, size_t)’ {aka ‘long unsigned int (*)(struct SDL_RWops *, const void *, long unsigned int, long unsigned i>
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:59:17: warning: assignment to ‘Sint64 (*)(struct SDL_RWops *, Sint64, int)’ {aka ‘long int (*)(struct SDL_RWops *, long int, int)’} from incompatible pointer type ‘int (*)(SDL_RWops *, int,>
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://github.com/gdraheim/zziplib http://zziplib.sourceforge.net/
|
With XFCE, after booting the computer for one hour, no issue. All applications launch correctly.
I completely uninstall gnome properly, switch to desktop profile with "eselect profile set 5", "emerge -avuDN @world" and "dispatch-conf; emerge -ac; emerge @module-rebuild; emerge @preserved-rebuild; revdep-rebuild -iq; eclean -d distfiles". After that, i installed XFCE with the Gentoo's wiki.
It seems it's relative to Gnome. |
|
| Back to top |
|
|
Hu
Moderator
Joined: 06 Mar 2007
Posts: 21607
|
| Posted: Wed Nov 30, 2022 4:13 pm Post subject: |
|
|
| P3nP3n wrote: | | Code: | >>> Messages generated by process 16294 on 2022-11-21 01:28:42 CET for package x11-libs/gtk+-3.24.34-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
>>> Messages generated by process 14329 on 2022-11-22 12:40:53 CET for package dev-libs/icu-71.1-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
>>> Messages generated by process 14329 on 2022-11-22 20:40:01 CET for package dev-libs/libcdio-paranoia-2.0.1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
>>> Messages generated by process 14329 on 2022-11-22 23:55:10 CET for package sys-devel/llvm-14.0.6-r2:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
>>> Messages generated by process 14329 on 2022-11-23 02:41:24 CET for package x11-libs/cairo-1.16.0-r6:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
>>> Messages generated by process 14329 on 2022-11-23 06:48:45 CET for package dev-libs/zziplib-0.13.72-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures. |
|
The wording of that Portage notice was not picked lightly. I would have serious concerns about the stability of any package which triggers "severe warnings which indicate that it may exhibit random runtime failures."
Of the ones shown, the LLVM warnings I might dismiss, because I know they do some weird things that walk on the edge of validity. None of the others seem worth dismissing. In particular, returning the address of a local variable is wrong unless the return value is ignored, the strncat will probably not do what is desired, freeing a non-heap object is very wrong, and the incompatible pointer type ones may be wrong, depending on the underlying types. Some of your warnings appear to have been truncated. long unsigned i> looks wrong in the zziplib warnings. |
|
| Back to top |
|
|
P3nP3n
n00b
Joined: 21 Nov 2022
Posts: 5
|
| Posted: Wed Nov 30, 2022 4:55 pm Post subject: |
|
|
Thanks for your answer.
Here the full-version for "dev-libs/icu" and "dev-libs/zziplib".
| Code: | >>> Messages generated by process 14329 on 2022-11-22 12:40:53 CET for package dev-libs/icu-71.1-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
cc1plus: warning: function may return address of local variable [-Wreturn-local-addr]
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned int*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSettings::fPriority))’ is used uninitialized [-Wuninitialized]
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned char*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSettings::fRetain))’ is used uninitialized [-Wuninitialized]
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned int*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSettings::fPriority))’ is used uninitialized [-Wuninitialized]
/var/tmp/portage/dev-libs/icu-71.1-r1/work/icu/source/i18n/unicode/numberformatter.h:764:28: warning: ‘*(unsigned char*)((char*)&settings + offsetof(icu::number::Precision::PrecisionUnion::FractionSignificantSettings, icu::number::Precision::PrecisionUnion::FractionSignificantSettings::fRetain))’ is used uninitialized [-Wuninitialized]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://icu.unicode.org/ |
| Code: | >>> Messages generated by process 14329 on 2022-11-23 06:48:45 CET for package dev-libs/zziplib-0.13.72-r1:
QA: other
QA Notice: Package triggers severe warnings which indicate that it
may exhibit random runtime failures.
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/zzip/fetch.h:230:43: warning: initialization of ‘struct zzip_extra_zip64 *’ from incompatible pointer type ‘char *’ [-Wincompatible-pointer-types]
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:57:17: warning: assignment to ‘size_t (*)(struct SDL_RWops *, void *, size_t, size_t)’ {aka ‘long unsigned int (*)(struct SDL_RWops *, void *, long unsigned int, long unsigned int)’} from incompatible pointer type ‘int (*)(SDL_RWops *, void *, int, int)’ [-Wincompatible-pointer-types]
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:58:18: warning: assignment to ‘size_t (*)(struct SDL_RWops *, const void *, size_t, size_t)’ {aka ‘long unsigned int (*)(struct SDL_RWops *, const void *, long unsigned int, long unsigned int)’} from incompatible pointer type ‘int (*)(SDL_RWops *, const void *, int, int)’ [-Wincompatible-pointer-types]
/var/tmp/portage/dev-libs/zziplib-0.13.72-r1/work/zziplib-0.13.72/SDL/SDL_rwops_zzip.c:59:17: warning: assignment to ‘Sint64 (*)(struct SDL_RWops *, Sint64, int)’ {aka ‘long int (*)(struct SDL_RWops *, long int, int)’} from incompatible pointer type ‘int (*)(SDL_RWops *, int, int)’ [-Wincompatible-pointer-types]
Please do not file a Gentoo bug and instead report the above QA
issues directly to the upstream developers of this software.
Homepage: https://github.com/gdraheim/zziplib http://zziplib.sourceforge.net/ |
It would be interesting to know if other users' logs show the same messages.
Thanks for your help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
