Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Scheda wireless non rilevata
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page Previous  1, 2, 3, 4  Next  
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Fri Sep 30, 2022 10:20 am    Post subject: Reply with quote

Il modulo lo ha caricato senza errori? L'interfaccia wireless ora è visibile?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Fri Sep 30, 2022 10:34 am    Post subject: Reply with quote

No, digitando ifconfig, non rileva alcuna scheda...
Back to top
View user's profile Send private message
oRDeX
Veteran
Veteran


Joined: 19 Oct 2003
Posts: 1325
Location: Italy

PostPosted: Tue Oct 04, 2022 8:18 pm    Post subject: Reply with quote

uhm...Puoi eseguire
Quote:
modprobe wl

e dopo postare l'output di
Code:
lsmod |grep wl

e
Code:
dmesg

?
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed Oct 05, 2022 6:20 am    Post subject: Reply with quote

Quote:
[ 0.158272] pci 0000:00:1c.5: bridge window [mem 0xb0700000-0xb07fffff]
[ 0.159189] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.159192] ACPI: PCI: Interrupt link LNKA disabled
[ 0.159230] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.159232] ACPI: PCI: Interrupt link LNKB disabled
[ 0.159267] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.159269] ACPI: PCI: Interrupt link LNKC disabled
[ 0.159304] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.159306] ACPI: PCI: Interrupt link LNKD disabled
[ 0.159340] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.159342] ACPI: PCI: Interrupt link LNKE disabled
[ 0.159377] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.159379] ACPI: PCI: Interrupt link LNKF disabled
[ 0.159413] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.159415] ACPI: PCI: Interrupt link LNKG disabled
[ 0.159450] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.159451] ACPI: PCI: Interrupt link LNKH disabled
[ 0.159653] ACPI: EC: interrupt unblocked
[ 0.159656] ACPI: EC: event unblocked
[ 0.159662] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.159664] ACPI: EC: GPE=0x4e
[ 0.159666] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.159669] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.159733] iommu: Default domain type: Translated
[ 0.159733] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.159733] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.159733] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.159733] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.159733] vgaarb: loaded
[ 0.159733] SCSI subsystem initialized
[ 0.159733] libata version 3.00 loaded.
[ 0.159733] ACPI: bus type USB registered
[ 0.159733] usbcore: registered new interface driver usbfs
[ 0.159733] usbcore: registered new interface driver hub
[ 0.159733] usbcore: registered new device driver usb
[ 0.159733] pps_core: LinuxPPS API ver. 1 registered
[ 0.159733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.159733] PTP clock support registered
[ 0.159733] EDAC MC: Ver: 3.0.0
[ 0.159733] Registered efivars operations
[ 0.159733] NetLabel: Initializing
[ 0.159733] NetLabel: domain hash size = 128
[ 0.159733] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.159733] NetLabel: unlabeled traffic allowed by default
[ 0.159733] PCI: Using ACPI for IRQ routing
[ 0.164299] PCI: pci_cache_line_size set to 64 bytes
[ 0.164429] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.164431] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.164432] e820: reserve RAM buffer [mem 0x8ad10000-0x8bffffff]
[ 0.164434] e820: reserve RAM buffer [mem 0x8ad62000-0x8bffffff]
[ 0.164436] e820: reserve RAM buffer [mem 0x8ae39000-0x8bffffff]
[ 0.164437] e820: reserve RAM buffer [mem 0x8aed2000-0x8bffffff]
[ 0.164439] e820: reserve RAM buffer [mem 0x8af84000-0x8bffffff]
[ 0.164440] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[ 0.164441] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[ 0.164445] clocksource: Switched to clocksource tsc-early
[ 0.172003] VFS: Disk quotas dquot_6.6.0
[ 0.172024] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.172104] pnp: PnP ACPI init
[ 0.172327] system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
[ 0.172394] system 00:01: [io 0xffff] has been reserved
[ 0.172399] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.172404] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.173397] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.173405] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.173411] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.173416] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.173421] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.173427] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.173432] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.173438] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.173443] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.173449] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.173526] system 00:04: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.173531] system 00:04: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.173696] pnp: PnP ACPI: found 5 devices
[ 0.179675] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.179753] NET: Registered PF_INET protocol family
[ 0.179849] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.181366] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.181384] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.181402] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.181517] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.181666] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.181732] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.181777] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.181804] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.181865] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.181874] NET: Registered PF_XDP protocol family
[ 0.181882] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.181894] pci 0000:06:00.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.181901] pci 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.181909] pci 0000:06:04.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 0.181915] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 0.181922] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000 add_align 100000
[ 0.181928] pci 0000:06:06.0: bridge window [io 0x1000-0x0fff] to [bus 6b] add_size 1000
[ 0.181934] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000 add_align 100000
[ 0.181940] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6b] add_size 200000 add_align 100000
[ 0.181953] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.181968] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.181975] pci 0000:00:1c.1: bridge window [mem 0xb0800000-0xb09fffff]
[ 0.181981] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.181990] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.181997] pci 0000:00:1c.2: bridge window [mem 0xb0400000-0xb06fffff]
[ 0.182015] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182021] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182026] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.182031] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.182037] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182042] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182047] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.182051] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.182057] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182062] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182067] pci 0000:06:00.0: BAR 13: no space for [io size 0x1000]
[ 0.182071] pci 0000:06:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182075] pci 0000:06:04.0: BAR 13: no space for [io size 0x1000]
[ 0.182080] pci 0000:06:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182084] pci 0000:06:06.0: BAR 13: no space for [io size 0x1000]
[ 0.182088] pci 0000:06:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182094] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.182098] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.182105] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182110] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182115] pci 0000:06:06.0: BAR 13: no space for [io size 0x1000]
[ 0.182119] pci 0000:06:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182123] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.182127] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.182133] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182138] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182143] pci 0000:06:04.0: BAR 13: no space for [io size 0x1000]
[ 0.182147] pci 0000:06:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182152] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.182157] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.182162] pci 0000:06:00.0: BAR 13: no space for [io size 0x1000]
[ 0.182166] pci 0000:06:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.182171] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.182179] pci 0000:06:00.0: bridge window [mem 0xb0b00000-0xb0bfffff]
[ 0.182192] pci 0000:06:03.0: PCI bridge to [bus 08-38]
[ 0.182197] pci 0000:06:03.0: bridge window [io 0x3000-0x3fff]
[ 0.182205] pci 0000:06:03.0: bridge window [mem 0xb0c00000-0xb4bfffff]
[ 0.182212] pci 0000:06:03.0: bridge window [mem 0xbcc00000-0xc0bfffff 64bit pref]
[ 0.182222] pci 0000:06:04.0: PCI bridge to [bus 39]
[ 0.182238] pci 0000:06:05.0: PCI bridge to [bus 3a-6a]
[ 0.182243] pci 0000:06:05.0: bridge window [io 0x4000-0x4fff]
[ 0.182250] pci 0000:06:05.0: bridge window [mem 0xb4c00000-0xb8bfffff]
[ 0.182257] pci 0000:06:05.0: bridge window [mem 0xc0c00000-0xc4bfffff 64bit pref]
[ 0.182267] pci 0000:06:06.0: PCI bridge to [bus 6b]
[ 0.182283] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
[ 0.182288] pci 0000:05:00.0: bridge window [io 0x3000-0x4fff]
[ 0.182296] pci 0000:05:00.0: bridge window [mem 0xb0b00000-0xb8bfffff]
[ 0.182303] pci 0000:05:00.0: bridge window [mem 0xbcc00000-0xc4bfffff 64bit pref]
[ 0.182313] pci 0000:00:1c.4: PCI bridge to [bus 05-9b]
[ 0.182317] pci 0000:00:1c.4: bridge window [io 0x3000-0x5fff]
[ 0.182323] pci 0000:00:1c.4: bridge window [mem 0xb0b00000-0xbcbfffff]
[ 0.182329] pci 0000:00:1c.4: bridge window [mem 0xbcc00000-0xc8bfffff 64bit pref]
[ 0.182338] pci 0000:04:00.0: BAR 6: assigned [mem 0xb0710000-0xb071ffff pref]
[ 0.182343] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.182350] pci 0000:00:1c.5: bridge window [mem 0xb0700000-0xb07fffff]
[ 0.182361] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182370] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182375] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.182379] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.182384] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.182388] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.182393] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.182397] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.182402] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.182406] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.182410] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.182415] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.182419] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.182424] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.182428] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.182433] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff window]
[ 0.182437] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.182442] pci_bus 0000:02: resource 1 [mem 0xb0800000-0xb09fffff]
[ 0.182446] pci_bus 0000:02: resource 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.182451] pci_bus 0000:03: resource 1 [mem 0xb0400000-0xb06fffff]
[ 0.182456] pci_bus 0000:05: resource 0 [io 0x3000-0x5fff]
[ 0.182460] pci_bus 0000:05: resource 1 [mem 0xb0b00000-0xbcbfffff]
[ 0.182464] pci_bus 0000:05: resource 2 [mem 0xbcc00000-0xc8bfffff 64bit pref]
[ 0.182469] pci_bus 0000:06: resource 0 [io 0x3000-0x4fff]
[ 0.182473] pci_bus 0000:06: resource 1 [mem 0xb0b00000-0xb8bfffff]
[ 0.182476] pci_bus 0000:06: resource 2 [mem 0xbcc00000-0xc4bfffff 64bit pref]
[ 0.182481] pci_bus 0000:07: resource 1 [mem 0xb0b00000-0xb0bfffff]
[ 0.182484] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.182488] pci_bus 0000:08: resource 1 [mem 0xb0c00000-0xb4bfffff]
[ 0.182491] pci_bus 0000:08: resource 2 [mem 0xbcc00000-0xc0bfffff 64bit pref]
[ 0.182496] pci_bus 0000:3a: resource 0 [io 0x4000-0x4fff]
[ 0.182499] pci_bus 0000:3a: resource 1 [mem 0xb4c00000-0xb8bfffff]
[ 0.182503] pci_bus 0000:3a: resource 2 [mem 0xc0c00000-0xc4bfffff 64bit pref]
[ 0.182508] pci_bus 0000:04: resource 1 [mem 0xb0700000-0xb07fffff]
[ 0.182920] PCI: CLS 256 bytes, default 64
[ 0.182965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.182968] software IO TLB: mapped [mem 0x0000000071921000-0x0000000075921000] (64MB)
[ 0.183004] Trying to unpack rootfs image as initramfs...
[ 0.194841] Initialise system trusted keyrings
[ 0.194852] Key type blacklist registered
[ 0.194886] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.196223] zbud: loaded
[ 0.208230] NET: Registered PF_ALG protocol family
[ 0.208236] xor: automatically using best checksumming function avx
[ 0.208241] Key type asymmetric registered
[ 0.208244] Asymmetric key parser 'x509' registered
[ 0.208271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.208305] io scheduler mq-deadline registered
[ 0.208308] io scheduler kyber registered
[ 0.208335] io scheduler bfq registered
[ 0.208661] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.209638] pcieport 0000:06:00.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.209797] pcieport 0000:06:03.0: enabling device (0000 -> 0003)
[ 0.209915] pcieport 0000:06:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.210174] pcieport 0000:06:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.210332] pcieport 0000:06:05.0: enabling device (0000 -> 0003)
[ 0.210437] pcieport 0000:06:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.210699] pcieport 0000:06:06.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.210878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.211465] ACPI: AC: AC Adapter [ADP1] (off-line)
[ 0.211524] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.211562] ACPI: button: Lid Switch [LID0]
[ 0.211588] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.211605] ACPI: button: Power Button [PWRB]
[ 0.211627] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.211643] ACPI: button: Sleep Button [SLPB]
[ 0.211666] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.211689] ACPI: button: Power Button [PWRF]
[ 0.212109] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.213267] hpet_acpi_add: no address or irqs in _CRS
[ 0.213301] Non-volatile memory driver v1.3
[ 0.213321] Linux agpgart interface v0.103
[ 0.213740] ahci 0000:04:00.0: version 3.0
[ 0.223912] ahci 0000:04:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.223920] ahci 0000:04:00.0: flags: 64bit ncq led clo only pio ccc
[ 0.224104] scsi host0: ahci
[ 0.224165] ata1: SATA max UDMA/133 abar m8192@0xb0700000 port 0xb0700100 irq 16
[ 0.224372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.224376] ehci-pci: EHCI PCI platform driver
[ 0.224387] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.224390] ohci-pci: OHCI PCI platform driver
[ 0.224398] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.224507] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.224550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.225600] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.225730] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.225765] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.225769] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.225852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.225861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.225867] usb usb1: Product: xHCI Host Controller
[ 0.225871] usb usb1: Manufacturer: Linux 5.15.69-gentoo-dist xhci-hcd
[ 0.225876] usb usb1: SerialNumber: 0000:00:14.0
[ 0.226005] hub 1-0:1.0: USB hub found
[ 0.226022] hub 1-0:1.0: 9 ports detected
[ 0.226433] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 0.226442] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.226447] usb usb2: Product: xHCI Host Controller
[ 0.226451] usb usb2: Manufacturer: Linux 5.15.69-gentoo-dist xhci-hcd
[ 0.226455] usb usb2: SerialNumber: 0000:00:14.0
[ 0.226573] hub 2-0:1.0: USB hub found
[ 0.226587] hub 2-0:1.0: 4 ports detected
[ 0.226757] usbcore: registered new interface driver usbserial_generic
[ 0.226763] usbserial: USB Serial support registered for generic
[ 0.226787] i8042: PNP: No PS/2 controller found.
[ 0.226816] mousedev: PS/2 mouse device common for all mice
[ 0.226914] rtc_cmos 00:02: RTC can wake from S4
[ 0.227117] rtc_cmos 00:02: registered as rtc0
[ 0.227151] rtc_cmos 00:02: setting system clock to 2022-10-05T06:09:09 UTC (1664950149)
[ 0.227165] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.227492] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.227510] device-mapper: uevent: version 1.0.3
[ 0.227561] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.227658] intel_pstate: Intel P-state driver initializing
[ 0.228058] efifb: probing for efifb
[ 0.228074] efifb: No BGRT, not showing boot graphics
[ 0.228076] efifb: framebuffer at 0xa0000000, using 16000k, total 16000k
[ 0.228080] efifb: mode is 2560x1600x32, linelength=10240, pages=1
[ 0.228084] efifb: scrolling: redraw
[ 0.228086] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.228175] Console: switching to colour frame buffer device 160x50
[ 0.241833] fb0: EFI VGA frame buffer device
[ 0.241940] hid: raw HID events driver (C) Jiri Kosina
[ 0.242082] usbcore: registered new interface driver usbhid
[ 0.242195] usbhid: USB HID core driver
[ 0.242382] drop_monitor: Initializing network drop monitor service
[ 0.242580] Initializing XFRM netlink socket
[ 0.242784] NET: Registered PF_INET6 protocol family
[ 0.474054] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 0.520624] Freeing initrd memory: 23248K
[ 0.524015] Segment Routing with IPv6
[ 0.524065] RPL Segment Routing with IPv6
[ 0.524118] In-situ OAM (IOAM) with IPv6
[ 0.524183] mip6: Mobile IPv6
[ 0.524216] NET: Registered PF_PACKET protocol family
[ 0.524474] microcode: sig=0x40651, pf=0x40, revision=0x26
[ 0.524545] microcode: Microcode Update Driver: v2.2.
[ 0.524550] IPI shorthand broadcast: enabled
[ 0.524652] AVX2 version of gcm_enc/dec engaged.
[ 0.524742] AES CTR mode by8 optimization enabled
[ 0.525094] sched_clock: Marking stable (523462694, 1625926)->(563017786, -37929166)
[ 0.525228] registered taskstats version 1
[ 0.525352] Loading compiled-in X.509 certificates
[ 0.525444] zswap: loaded using pool lzo/zbud
[ 0.525600] Key type ._fscrypt registered
[ 0.525644] Key type .fscrypt registered
[ 0.527833] Key type fscrypt-provisioning registered
[ 0.530240] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 0.532503] Key type big_key registered
[ 0.535968] Key type encrypted registered
[ 0.537031] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.538175] ima: No TPM chip found, activating TPM-bypass!
[ 0.540610] ata1.00: unexpected _GTF length (8)
[ 0.542644] ima: Allocated hash algorithm: sha256
[ 0.544910] ata1.00: ATA-8: APPLE SSD SM0512F, UXM2JA1Q, max UDMA/133
[ 0.547089] ima: No architecture policies found
[ 0.549364] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.551576] evm: Initialising EVM extended attributes:
[ 0.551576] evm: security.selinux
[ 0.551577] evm: security.SMACK64 (disabled)
[ 0.554009] ata1.00: unexpected _GTF length (8)
[ 0.556028] evm: security.SMACK64EXEC (disabled)
[ 0.556029] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.556030] evm: security.SMACK64MMAP (disabled)
[ 0.556030] evm: security.apparmor
[ 0.558282] ata1.00: configured for UDMA/133
[ 0.560341] evm: security.ima
[ 0.560342] evm: security.capability
[ 0.562611] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM0512 JA1Q PQ: 0 ANSI: 5
[ 0.566112] evm: HMAC attrs: 0x1
[ 0.566385] PM: Magic number: 10:649:164
[ 0.569860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.569934] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/466 GiB)
[ 0.569936] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.569944] sd 0:0:0:0: [sda] Write Protect is off
[ 0.569946] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.569960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.573399] RAS: Correctable Errors collector initialized.
[ 0.618583] usb 1-3: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 0.620838] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.622156] sda: sda1 sda2 sda3 sda4
[ 0.622911] usb 1-3: Product: BRCM20702 Hub
[ 0.627010] usb 1-3: Manufacturer: Apple Inc.
[ 0.629512] hub 1-3:1.0: USB hub found
[ 0.631793] hub 1-3:1.0: 3 ports detected
[ 0.640770] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.643855] Freeing unused decrypted memory: 2036K
[ 0.646159] Freeing unused kernel image (initmem) memory: 2832K
[ 0.648223] Write protecting the kernel read-only data: 22528k
[ 0.650634] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.652774] Freeing unused kernel image (rodata/data gap) memory: 144K
[ 0.697249] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.699267] x86/mm: Checking user space page tables
[ 0.742379] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.744407] Run /init as init process
[ 0.746425] with arguments:
[ 0.746426] /init
[ 0.746427] with environment:
[ 0.746427] HOME=/
[ 0.746428] TERM=linux
[ 0.746428] BOOT_IMAGE=/vmlinuz-5.15.69-gentoo-dist
[ 0.758089] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 0.776153] usb 2-3: New USB device found, idVendor=05ac, idProduct=8406, bcdDevice= 8.20
[ 0.778414] usb 2-3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 0.780521] usb 2-3: Product: Card Reader
[ 0.782640] usb 2-3: Manufacturer: Apple
[ 0.784953] usb 2-3: SerialNumber: 000000000820
[ 0.795276] dracut: Gentoo-2.8
[ 0.897376] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 0.957915] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 0.960973] scsi host1: usb-storage 2-3:1.0
[ 0.963147] usbcore: registered new interface driver usb-storage
[ 0.966286] usbcore: registered new interface driver uas
[ 1.040178] BTRFS: device fsid d3fc28f5-a2cd-46eb-9429-4deca0459c79 devid 1 transid 1071 /dev/sda4 scanned by systemd-udevd (345)
[ 1.053165] usb 1-5: New USB device found, idVendor=05ac, idProduct=025a, bcdDevice= 2.24
[ 1.053215] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.053240] usb 1-5: Product: Apple Internal Keyboard / Trackpad
[ 1.053258] usb 1-5: Manufacturer: Apple Inc.
[ 1.064460] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:05AC:025A.0001/input/input4
[ 1.121014] apple 0003:05AC:025A.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input0
[ 1.121244] apple 0003:05AC:025A.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input1
[ 1.124038] usb 1-3.1: new full-speed USB device number 4 using xhci_hcd
[ 1.200741] tsc: Refined TSC clocksource calibration: 2599.999 MHz
[ 1.200774] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns
[ 1.200832] clocksource: Switched to clocksource tsc
[ 1.215944] usb 1-3.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
[ 1.215977] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.217591] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:05AC:820A.0003/input/input5
[ 1.274217] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-3.1/input0
[ 1.347422] usb 1-3.2: new full-speed USB device number 5 using xhci_hcd
[ 1.439198] usb 1-3.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
[ 1.439235] usb 1-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.441444] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:820B.0004/input/input6
[ 1.441814] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-3.2/input0
[ 1.514158] usb 1-3.3: new full-speed USB device number 6 using xhci_hcd
[ 1.606565] usb 1-3.3: New USB device found, idVendor=05ac, idProduct=8289, bcdDevice= 1.50
[ 1.606674] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.606749] usb 1-3.3: Product: Bluetooth USB Host Controller
[ 1.606810] usb 1-3.3: Manufacturer: Apple Inc.
[ 1.664615] BTRFS info (device sda4): disk space caching is enabled
[ 1.664663] BTRFS info (device sda4): has skinny extents
[ 1.669616] BTRFS info (device sda4): enabling ssd optimizations
[ 1.693827] dracut: Remounting /dev/disk/by-uuid/d3fc28f5-a2cd-46eb-9429-4deca0459c79 with -o noatime,ro
[ 1.694805] BTRFS info (device sda4): disk space caching is enabled
[ 1.707384] dracut: Mounted root filesystem /dev/sda4
[ 1.741994] dracut: Switching root
[ 1.975878] scsi 1:0:0:0: Direct-Access APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
[ 1.976079] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.976513] sd 1:0:0:0: [sdb] Media removed, stopped polling
[ 1.977217] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 3.260981] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
[ 3.301182] usbcore: registered new device driver apple-mfi-fastcharge
[ 3.361141] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input7
[ 3.361231] usbcore: registered new interface driver bcm5974
[ 3.364330] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
[ 3.364380] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[ 3.364408] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[ 3.364455] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[ 3.364504] bcma-pci-bridge 0000:03:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[ 3.364531] bcma-pci-bridge 0000:03:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[ 3.421319] bcma: Unsupported SPROM revision: 11
[ 3.421325] bcma-pci-bridge 0000:03:00.0: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 3.421328] bcma-pci-bridge 0000:03:00.0: bus0: Using fallback SPROM failed (err -2)
[ 3.421330] bcma-pci-bridge 0000:03:00.0: bus0: No SPROM available
[ 3.422077] Bluetooth: Core ver 2.22
[ 3.422098] NET: Registered PF_BLUETOOTH protocol family
[ 3.422100] Bluetooth: HCI device and connection manager initialized
[ 3.422101] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 3.422104] Bluetooth: HCI socket layer initialized
[ 3.422106] Bluetooth: L2CAP socket layer initialized
[ 3.422109] Bluetooth: SCO socket layer initialized
[ 3.424091] ACPI: bus type thunderbolt registered
[ 3.424625] thunderbolt 0000:07:00.0: device link creation from 0000:06:00.0 failed
[ 3.424696] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.425912] snd_hda_codec_cirrus hdaudioC1D0: autoconfig for CS4208: line_outs=2 (0x12/0x13/0x0/0x0/0x0) type:speaker
[ 3.425919] snd_hda_codec_cirrus hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.425922] snd_hda_codec_cirrus hdaudioC1D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[ 3.425925] snd_hda_codec_cirrus hdaudioC1D0: mono: mono_out=0x0
[ 3.425926] snd_hda_codec_cirrus hdaudioC1D0: dig-out=0x21/0x0
[ 3.425928] snd_hda_codec_cirrus hdaudioC1D0: inputs:
[ 3.425929] snd_hda_codec_cirrus hdaudioC1D0: Internal Mic=0x1c
[ 3.425931] snd_hda_codec_cirrus hdaudioC1D0: Mic=0x18
[ 3.427166] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 3.434202] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.434285] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.434343] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.440860] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered
[ 3.467927] Console: switching to colour dummy device 80x25
[ 3.468060] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.472514] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.491674] usbcore: registered new interface driver btusb
[ 3.492010] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.493951] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.493964] Loading firmware: regulatory.db
[ 3.494646] Loading firmware: regulatory.db.p7s
[ 3.511408] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[ 3.514527] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.514531] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.514533] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.514534] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.514535] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.523433] usb 1-3.1: USB disconnect, device number 4
[ 3.535262] iTCO_vendor_support: vendor-support=0
[ 3.536280] wl: loading out-of-tree module taints kernel.
[ 3.536284] wl: module license 'MIXED/Proprietary' taints kernel.
[ 3.536285] Disabling lock debugging due to kernel taint
[ 3.536968] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 3.550311] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 3.551323] ACPI: video: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 3.552149] acpi device:02: registered as cooling_device4
[ 3.552893] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 3.576729] applesmc: key=571 fan=1 temp=32 index=31 acc=0 lux=2 kbd=1
[ 3.576852] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.587664] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_fence_ops [i915])
[ 3.591602] fbcon: i915drmfb (fb0) is primary device
[ 3.605433] Bluetooth: hci0: BCM: chip id 73 build 1127
[ 3.606415] Bluetooth: hci0: BCM: product 05ac:8289
[ 3.607348] Bluetooth: hci0: BCM: features 0x07
[ 3.623441] Bluetooth: hci0: MacBook Pro di Gianluca
[ 3.727735] usb 1-3.2: USB disconnect, device number 5
[ 5.030248] Console: switching to colour frame buffer device 160x50
[ 5.072163] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 5.098015] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 5.098073] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 5.099749] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 5.100627] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 5.100678] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 5.126429] intel_rapl_common: Found RAPL domain package
[ 5.126432] intel_rapl_common: Found RAPL domain core
[ 5.126434] intel_rapl_common: Found RAPL domain uncore
[ 5.126435] intel_rapl_common: Found RAPL domain dram
[ 5.130598] b43-phy0: Broadcom 4360 WLAN found (core revision 42)
[ 5.131016] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[ 5.131026] b43: probe of bcma0:1 failed with error -95
[ 5.131054] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 5.219997] BTRFS info (device sda4): disk space caching is enabled
[ 5.285352] Adding 4384764k swap on /dev/sda3. Priority:-2 extents:1 across:4384764k SSFS
[ 5.320615] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.927498] NET: Registered PF_QIPCRTR protocol family
nemo@Sparrow ~ $ modprobewl

nemo@Sparrow ~ $ lsmod | grep wl
wl 6373376 0
cfg80211 843776 3 wl,b43,mac80211
Back to top
View user's profile Send private message
oRDeX
Veteran
Veteran


Joined: 19 Oct 2003
Posts: 1325
Location: Italy

PostPosted: Wed Oct 05, 2022 9:18 pm    Post subject: Reply with quote

Quote:
[ 5.131016] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)

Questo é il driver b43 che cerca di rilevare la scheda, ma non riesce.
Mi domando se possa comunque creare un conflitto.

Se fai modprobe -r b43 wl e poi di nuovo modprobe wl cambia qualcosa?
dmesg |tail -n 50 dovrebbe mostrare l'esito.
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Thu Oct 06, 2022 4:50 am    Post subject: Reply with quote

oRDeX wrote:
Mi domando se possa comunque creare un conflitto.

Direi di sì visto che quando installi broadcom-sta alla fine ti riporta il messaggio
Code:
 *   B43: If you insist on building this, you must blacklist it!
 *   BCMA: If you insist on building this, you must blacklist it!
 *   SSB: If you insist on building this, you must blacklist it!
 *   MAC80211: If you insist on building this, you must blacklist it!

_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
sabayonino
Veteran
Veteran


Joined: 03 Jan 2012
Posts: 1008

PostPosted: Thu Oct 06, 2022 5:43 am    Post subject: Reply with quote

Salve

Mi intrometto :

Ma i drivers broadcom dovrebbero in qualche modo già essere inclusi nel kernel

kernel-bin
Code:
zcat /proc/config.gz | grep B43
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y


Probabilemente deve solo abilitare/disabilitare qualche voce blacklistando appunto il modulo indicato da Fedeliallalinea per il caricamento del firmware
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA
Back to top
View user's profile Send private message
oRDeX
Veteran
Veteran


Joined: 19 Oct 2003
Posts: 1325
Location: Italy

PostPosted: Thu Oct 06, 2022 8:15 am    Post subject: Reply with quote

sabayonino wrote:
Salve
Ma i drivers broadcom dovrebbero in qualche modo già essere inclusi nel kernel


La sua 4360 non é supportata dal driver b43, quindi richiederebbe il driver proprietario.
Come dice @fedeliallalinea probabilmente andrebbero messi in blacklist i moduli menzionati, onde evitare conflitti.

Come primo test si puó provare a fare un modprobe -r di tutti quei moduli e vedere se wl riesce a rilevare la scheda (occhio che alcuni moduli potrebbero ri-caricarsi in automatico).
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Thu Oct 06, 2022 4:22 pm    Post subject: Reply with quote

Scusate il ritardo nel rispondere... eseguendo questi comandi:

Code:
Se fai modprobe -r b43 wl e poi di nuovo modprobe wl cambia qualcosa?
dmesg |tail -n 50 dovrebbe mostrare l'esito.


finalmente visualizzo il modulo wifi e riesco a connettermi, una cosa... quando poi riavvio perde le impostazioni e devo digitare nuovamente i comandi, come faccio a rendere permanenti queste modifiche?
Grazie
Back to top
View user's profile Send private message
sabayonino
Veteran
Veteran


Joined: 03 Jan 2012
Posts: 1008

PostPosted: Thu Oct 06, 2022 6:58 pm    Post subject: Reply with quote

Aggiungi il modulo b43 in blacklist
Code:
# echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf


riavvia.

https://wiki.gentoo.org/wiki/Kernel_Modules#Blacklist_modules
_________________
LRS i586 on G.Drive
LRS x86-64 EFI on MEGA
Back to top
View user's profile Send private message
oRDeX
Veteran
Veteran


Joined: 19 Oct 2003
Posts: 1325
Location: Italy

PostPosted: Thu Oct 06, 2022 9:04 pm    Post subject: Reply with quote

GianGian2387 wrote:
Scusate il ritardo nel rispondere... eseguendo questi comandi:

Code:
Se fai modprobe -r b43 wl e poi di nuovo modprobe wl cambia qualcosa?
dmesg |tail -n 50 dovrebbe mostrare l'esito.


finalmente visualizzo il modulo wifi e riesco a connettermi, una cosa... quando poi riavvio perde le impostazioni e devo digitare nuovamente i comandi, come faccio a rendere permanenti queste modifiche?
Grazie


Ottimo!

Oltre a quanto suggerisce sabayonino (che é prassi corretta), potresti anche decidere di non compilare il modulo b43 la prossima volta che ricompili un nuovo kernel.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Thu Oct 06, 2022 9:29 pm    Post subject: Reply with quote

non funzionava, ho aggiunto anche: BCMA, SSB, MAC80211.
Ora quando eseguo il login la connessione risulta essere attiva, vi ringrazio per l'aiuto
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Sat Oct 08, 2022 2:01 pm    Post subject: Reply with quote

oRDeX wrote:
GianGian2387 wrote:
Scusate il ritardo nel rispondere... eseguendo questi comandi:

Code:
Se fai modprobe -r b43 wl e poi di nuovo modprobe wl cambia qualcosa?
dmesg |tail -n 50 dovrebbe mostrare l'esito.


finalmente visualizzo il modulo wifi e riesco a connettermi, una cosa... quando poi riavvio perde le impostazioni e devo digitare nuovamente i comandi, come faccio a rendere permanenti queste modifiche?
Grazie


Ottimo!

Oltre a quanto suggerisce sabayonino (che é prassi corretta), potresti anche decidere di non compilare il modulo b43 la prossima volta che ricompili un nuovo kernel.


Come faccio ad escludere questo modul durante la compilazione del kernel? (ho trovato la sezione Broadcom ma nello specifico non ho trovato i moduli che vorrei non compilare) kernel 5.15.69
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Sat Oct 08, 2022 2:06 pm    Post subject: Reply with quote

GianGian2387 wrote:
Come faccio ad escludere questo modul durante la compilazione del kernel? (ho trovato la sezione Broadcom ma nello specifico non ho trovato i moduli che vorrei non compilare) kernel 5.15.69

Se dal menuconfig del kernel premi il tasto '/' ti si apre una finestra di ricerca, inserendo il nome del modulo dovrebbe dirti in che menu si trova.
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 5:31 pm    Post subject: Reply with quote

Scusate se riprendo la discussione....
ho aggiornato il sistema (ha aggiornato anche il kernel) ora il modulo wifi è sparito nuovamente...

Quote:
Sparrow /home/nemo *# modprobe wl
modprobe: FATAL: Module wl not found in directory /lib/modules/6.1.24-gentoo-dist

sapreste aiutarmi?
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Wed May 10, 2023 6:06 pm    Post subject: Reply with quote

Hai provato a ricompilare il pacchetto net-wireless/broadcom-sta, se si riesce ancora a compilare con il kernel 6.1.xx.
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 6:23 pm    Post subject: Reply with quote

l'installazione la fa fare come sempre, poi quando do i comandi di sopra ricevo quei messaggi
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Wed May 10, 2023 6:26 pm    Post subject: Reply with quote

Puoi postare l'output dei comandi uname -a e eselect kernel list.
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 6:34 pm    Post subject: Reply with quote

Quote:
Sparrow /home/nemo *# uname -a
Linux nemo 6.1.24-gentoo-dist #1 SMP PREEMPT_DYNAMIC thu Apr 13 18:23:18 -00 2023 x86_64 Intel(R) Core(TM) i5-4288U CPU @ 2.60GHz GenuineIntel GNU/Linux
Sparrow /home/nemo *#
eselect kernel list
Available kernel symlink targets:
[1] linux-6.1.19-gentoo
[2] linux-6.1.24-gentoo-dist*
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Wed May 10, 2023 6:46 pm    Post subject: Reply with quote

La use flag dist-kernel è abilitata nel pacchetto net-wireless/broadcom-sta?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 6:50 pm    Post subject: Reply with quote

come faccio per verificarlo?
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Wed May 10, 2023 6:55 pm    Post subject: Reply with quote

Prova a lanciare il comando emerge -pv net-wireless/broadcom-sta.
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 7:23 pm    Post subject: Reply with quote

Quote:
Sparrow /home/nemo *# emerge -pv net-wireless/broadcomsta
these are the packages that would be merged, in order:

calculating dependencies... done!
Dependency resolutions took 1.90s.

[ebuild N ] net-wireless/broadcom-sta-6.30.223.2271-r6::gentoo USE="dist-kernel" 0 kib

Total: 1 package (1 new), size of downloads: 0kib
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30837
Location: here

PostPosted: Wed May 10, 2023 7:37 pm    Post subject: Reply with quote

Ma il pacchetto net-wireless/broadcom-sta oon sembra installato. Il pc è sempre lo stesso?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Wed May 10, 2023 7:41 pm    Post subject: Reply with quote

si, sempre lo stesso
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Goto page Previous  1, 2, 3, 4  Next
Page 2 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum