| View previous topic :: View next topic |
| Author |
Message |
Hieronymus Bosch
Tux's lil' helper
Joined: 29 Jan 2015
Posts: 83
Location: 31°45′33.14″N 106°29′24.63″W
|
 Posted: Sun Aug 07, 2022 4:26 pm Post subject: Black screen with underscore cursor |
 |
|
Hi everyone,
I upgraded to kernel version 5.18.6 and suddenly after a reboot lightdm does not start, it get stuck on a black screen with a white underscore.
I can access my data with another virtual terminal (ctrl + alt + f4). I verified that elongid, dbus and display-manager services are running.
Before this happened, I was modifying the kernel to enable a Dell Dock (following the wiki):
https://wiki.gentoo.org/wiki/Dell_DA200
https://wiki.gentoo.org/wiki/DisplayLink
Below are some of my configuration files, in case you need more information just ask me:
lspci -nnk
| Code: |
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5910] (rev 05)
Subsystem: Dell Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [1028:07e1]
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05)
Subsystem: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) [8086:2015]
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 630 [8086:591b] (rev 04)
DeviceName: Onboard IGD
Subsystem: Dell HD Graphics 630 [1028:07e1]
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 05)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [1028:07e1]
00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [1028:07e1]
Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal Subsystem [1028:07e1]
00:15.0 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 [8086:a160] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:07e1]
00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family MEI Controller [1028:07e1]
00:17.0 SATA controller [0106]: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] [8086:a103] (rev 31)
Subsystem: Dell HM170/QM170 Chipset SATA Controller [AHCI Mode] [1028:07e1]
Kernel driver in use: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1)
Subsystem: Dell 100 Series/C230 Series Chipset Family PCI Express Root Port [1028:07e1]
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #6 [8086:a115] (rev f1)
Subsystem: Dell 100 Series/C230 Series Chipset Family PCI Express Root Port [1028:07e1]
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1)
Kernel driver in use: pcieport
00:1e.0 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 [8086:a127] (rev 31)
00:1f.0 ISA bridge [0601]: Intel Corporation HM175 Chipset LPC/eSPI Controller [8086:a152] (rev 31)
Subsystem: Dell HM175 Chipset LPC/eSPI Controller [1028:07e1]
00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Power Management Controller [1028:07e1]
00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller [8086:a171] (rev 31)
Subsystem: Dell CM238 HD Audio Controller [1028:07e1]
Kernel driver in use: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus [1028:07e1]
Kernel driver in use: i801_smbus
01:00.0 3D controller [0302]: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] [10de:1c8d] (rev a1)
Subsystem: Dell GP107M [GeForce GTX 1050 Mobile] [1028:07e1]
Kernel driver in use: nvidia
Kernel modules: nvidia_drm, nvidia
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Subsystem: Dell RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1028:07e1]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Intel Corporation Wireless 3165 [8086:3165] (rev 79)
Subsystem: Intel Corporation Wireless 3165 [8086:4410]
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
04:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller 980 [144d:a809]
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller 980 [144d:a801]
Kernel driver in use: nvme
|
/var/log/lightdm/lightdm.log
| Code: |
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=1926
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.01s] DEBUG: Monitoring logind for seats
[+0.01s] DEBUG: New seat added from logind: seat0
[+0.01s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.01s] DEBUG: Seat seat0 has property CanMultiSession=no
[+0.01s] DEBUG: Seat seat0: Starting
[+0.01s] DEBUG: Seat seat0: Creating greeter session
[+0.01s] DEBUG: Seat seat0: Creating display server of type x
[+0.01s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.01s] DEBUG: Using VT 7
[+0.01s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.01s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+0.01s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0
[+0.01s] DEBUG: XServer 0: Launching X Server
[+0.01s] DEBUG: Launching process 1949: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.01s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.75s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.75s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+1.28s] DEBUG: Got signal 10 from process 1949
[+1.28s] DEBUG: XServer 0: Got signal from X server :0
[+1.28s] DEBUG: XServer 0: Connecting to XServer :0
[+1.28s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+1.28s] DEBUG: Session pid=1998: Started with service 'lightdm-greeter', username 'root'
[+1.35s] DEBUG: Session pid=1998: Authentication complete with return value 0: Success
[+1.35s] DEBUG: Seat seat0: Session authenticated, running command
[+1.35s] DEBUG: Session pid=1998: Running command /usr/sbin/lightdm-gtk-greeter
[+1.35s] DEBUG: Creating shared data directory /var/lib/lightdm-data/root
[+1.35s] DEBUG: Session pid=1998: Logging to /var/log/lightdm/seat0-greeter.log
[+1.36s] DEBUG: Activating VT 7
[+1.36s] DEBUG: Activating login1 session 1
[+1.36s] DEBUG: Seat seat0 changes active session to 1
[+1.36s] DEBUG: Session 1 is already active
[+1.55s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+2.01s] DEBUG: Greeter start authentication for grsn
[+2.01s] DEBUG: Session pid=2036: Started with service 'lightdm', username 'grsn'
[+2.02s] DEBUG: Session pid=2036: Got 1 message(s) from PAM
[+2.02s] DEBUG: Prompt greeter with 1 message(s)
[+38.52s] DEBUG: Seat seat0 changes active session to
[+46.57s] DEBUG: Seat seat0 changes active session to 2
|
Xorg.0.log
| Code: |
[ 7.705]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 7.705] Current Operating System: Linux berlin 5.17.9-gentoo #4 SMP PREEMPT Sat Aug 6 20:19:06 CDT 2022 x86_64
[ 7.705] Kernel command line: BOOT_IMAGE=/vmlinuz-5.17.9-gentoo root=/dev/nvme0n1p3 ro quiet
[ 7.705]
[ 7.705] Current version of pixman: 0.40.0
[ 7.705] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.705] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.705] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 7 10:01:05 2022
[ 7.707] (==) Using config file: "/etc/X11/xorg.conf"
[ 7.707] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.708] (==) ServerLayout "Layout0"
[ 7.708] (**) |-->Screen "Screen0" (0)
[ 7.708] (**) | |-->Monitor "Monitor0"
[ 7.708] (**) | |-->Device "Device0"
[ 7.708] (**) |-->Input Device "Keyboard0"
[ 7.709] (**) |-->Input Device "Mouse0"
[ 7.709] (==) Automatically adding devices
[ 7.709] (==) Automatically enabling devices
[ 7.709] (==) Automatically adding GPU devices
[ 7.709] (==) Automatically binding GPU devices
[ 7.709] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7.710] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 7.710] Entry deleted from font path.
[ 7.710] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 7.710] Entry deleted from font path.
[ 7.710] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 7.710] Entry deleted from font path.
[ 7.710] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 7.710] Entry deleted from font path.
[ 7.710] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 7.711] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi
[ 7.711] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 7.711] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 7.711] (WW) Disabling Keyboard0
[ 7.711] (WW) Disabling Mouse0
[ 7.711] (II) Module ABI versions:
[ 7.711] X.Org ANSI C Emulation: 0.4
[ 7.711] X.Org Video Driver: 25.2
[ 7.711] X.Org XInput driver : 24.4
[ 7.711] X.Org Server Extension : 10.0
[ 7.712] (++) using VT number 7
[ 7.712] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 7.712] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.712] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[ 7.712] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.712] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 7.731] (--) PCI:*(0@0:2:0) 8086:591b:1028:07e1 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 7.731] (--) PCI: (1@0:0:0) 10de:1c8d:1028:07e1 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.731] (II) LoadModule: "glx"
[ 7.731] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 7.736] (II) Module glx: vendor="X.Org Foundation"
[ 7.736] compiled for 1.21.1.4, module version = 1.0.0
[ 7.736] ABI class: X.Org Server Extension, version 10.0
[ 7.736] (II) LoadModule: "nvidia"
[ 7.737] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 7.739] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 7.739] compiled for 1.6.99.901, module version = 1.0.0
[ 7.739] Module class: X.Org Video Driver
[ 7.739] (II) NVIDIA dlloader X Driver 510.73.05 Sat May 7 05:29:47 UTC 2022
[ 7.739] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 7.758] (II) Loading sub module "fb"
[ 7.758] (II) LoadModule: "fb"
[ 7.758] (II) Module "fb" already built-in
[ 7.758] (II) Loading sub module "wfb"
[ 7.758] (II) LoadModule: "wfb"
[ 7.758] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 7.758] (II) Module wfb: vendor="X.Org Foundation"
[ 7.758] compiled for 1.21.1.4, module version = 1.0.0
[ 7.758] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.758] (II) Loading sub module "ramdac"
[ 7.758] (II) LoadModule: "ramdac"
[ 7.758] (II) Module "ramdac" already built-in
[ 7.759] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 7.760] (==) NVIDIA(0): RGB weight 888
[ 7.760] (==) NVIDIA(0): Default visual is TrueColor
[ 7.760] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.760] (**) NVIDIA(0): Enabling 2D acceleration
[ 7.760] (II) Loading sub module "glxserver_nvidia"
[ 7.760] (II) LoadModule: "glxserver_nvidia"
[ 7.760] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so
[ 7.784] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 7.784] compiled for 1.6.99.901, module version = 1.0.0
[ 7.784] Module class: X.Org Server Extension
[ 7.784] (II) NVIDIA GLX Module 510.73.05 Sat May 7 05:24:37 UTC 2022
[ 7.784] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 8.547] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1050 (GP107-A) at PCI:1:0:0
[ 8.547] (II) NVIDIA(0): (GPU-0)
[ 8.547] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 8.547] (--) NVIDIA(0): VideoBIOS: 86.07.3b.00.1f
[ 8.547] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 8.547] (II) NVIDIA(0): Validated MetaModes:
[ 8.547] (II) NVIDIA(0): "NULL"
[ 8.547] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 8.547] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 8.547] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 8.547] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 8.547] (II) NVIDIA: access.
[ 8.552] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 8.552] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 8.552] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 8.552] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 8.552] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 8.552] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 8.552] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 8.552] (II) NVIDIA(0): Config Options in the README.
[ 8.569] (II) NVIDIA(0): Setting mode "NULL"
[ 8.572] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 8.572] (==) NVIDIA(0): Backing store enabled
[ 8.572] (==) NVIDIA(0): Silken mouse enabled
[ 8.572] (**) NVIDIA(0): DPMS enabled
[ 8.572] (II) Loading sub module "dri2"
[ 8.572] (II) LoadModule: "dri2"
[ 8.572] (II) Module "dri2" already built-in
[ 8.572] (II) NVIDIA(0): [DRI2] Setup complete
[ 8.572] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 8.572] (II) Initializing extension Generic Event Extension
[ 8.572] (II) Initializing extension SHAPE
[ 8.572] (II) Initializing extension MIT-SHM
[ 8.572] (II) Initializing extension XInputExtension
[ 8.572] (II) Initializing extension XTEST
[ 8.572] (II) Initializing extension BIG-REQUESTS
[ 8.572] (II) Initializing extension SYNC
[ 8.572] (II) Initializing extension XKEYBOARD
[ 8.572] (II) Initializing extension XC-MISC
[ 8.572] (II) Initializing extension XFIXES
[ 8.572] (II) Initializing extension RENDER
[ 8.572] (II) Initializing extension RANDR
[ 8.572] (II) Initializing extension COMPOSITE
[ 8.572] (II) Initializing extension DAMAGE
[ 8.572] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.572] (II) Initializing extension DOUBLE-BUFFER
[ 8.572] (II) Initializing extension RECORD
[ 8.572] (II) Initializing extension DPMS
[ 8.572] (II) Initializing extension Present
[ 8.572] (II) Initializing extension DRI3
[ 8.572] (II) Initializing extension X-Resource
[ 8.572] (II) Initializing extension XVideo
[ 8.572] (II) Initializing extension XVideo-MotionCompensation
[ 8.572] (II) Initializing extension GLX
[ 8.572] (II) Initializing extension GLX
[ 8.573] (II) Indirect GLX disabled.
[ 8.573] (II) GLX: Another vendor is already registered for screen 0
[ 8.573] (II) Initializing extension XFree86-VidModeExtension
[ 8.573] (II) Initializing extension XFree86-DGA
[ 8.573] (II) Initializing extension XFree86-DRI
[ 8.573] (II) Initializing extension DRI2
[ 8.573] (II) Initializing extension NV-GLX
[ 8.573] (II) Initializing extension NV-CONTROL
[ 8.616] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 8.616] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.616] (II) LoadModule: "libinput"
[ 8.617] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 8.618] (II) Module libinput: vendor="X.Org Foundation"
[ 8.618] compiled for 1.21.1.4, module version = 1.2.1
[ 8.618] Module class: X.Org XInput Driver
[ 8.618] ABI class: X.Org XInput driver, version 24.4
[ 8.618] (II) Using input driver 'libinput' for 'Power Button'
[ 8.618] (**) Power Button: always reports core events
[ 8.618] (**) Option "Device" "/dev/input/event3"
[ 8.623] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 8.623] (II) event3 - Power Button: device is a keyboard
[ 8.623] (II) event3 - Power Button: device removed
[ 8.631] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 8.631] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.631] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 8.631] (II) event3 - Power Button: device is a keyboard
[ 8.632] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.632] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.632] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.632] (**) Video Bus: always reports core events
[ 8.632] (**) Option "Device" "/dev/input/event4"
[ 8.632] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 8.632] (II) event4 - Video Bus: device is a keyboard
[ 8.632] (II) event4 - Video Bus: device removed
[ 8.650] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 8.650] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.650] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 8.651] (II) event4 - Video Bus: device is a keyboard
[ 8.651] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 8.651] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.651] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.651] (**) Video Bus: always reports core events
[ 8.651] (**) Option "Device" "/dev/input/event5"
[ 8.652] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 8.652] (II) event5 - Video Bus: device is a keyboard
[ 8.652] (II) event5 - Video Bus: device removed
[ 8.666] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input5/event5"
[ 8.666] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 8.667] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 8.667] (II) event5 - Video Bus: device is a keyboard
[ 8.668] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8.668] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.668] (II) Using input driver 'libinput' for 'Power Button'
[ 8.668] (**) Power Button: always reports core events
[ 8.668] (**) Option "Device" "/dev/input/event1"
[ 8.670] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.670] (II) event1 - Power Button: device is a keyboard
[ 8.670] (II) event1 - Power Button: device removed
[ 8.680] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 8.680] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 8.682] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.682] (II) event1 - Power Button: device is a keyboard
[ 8.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 8.683] (II) No input driver specified, ignoring this device.
[ 8.683] (II) This device may have been added with another device file.
[ 8.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 8.684] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 8.684] (II) Using input driver 'libinput' for 'Sleep Button'
[ 8.684] (**) Sleep Button: always reports core events
[ 8.684] (**) Option "Device" "/dev/input/event0"
[ 8.686] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.686] (II) event0 - Sleep Button: device is a keyboard
[ 8.686] (II) event0 - Sleep Button: device removed
[ 8.694] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 8.694] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 8.696] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.696] (II) event0 - Sleep Button: device is a keyboard
[ 8.699] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15)
[ 8.699] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 8.699] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 8.699] (**) Logitech USB Receiver: always reports core events
[ 8.699] (**) Option "Device" "/dev/input/event15"
[ 8.702] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 8.703] (II) event15 - Logitech USB Receiver: device is a keyboard
[ 8.703] (II) event15 - Logitech USB Receiver: device removed
[ 8.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:046D:C52B.0001/input/input16/event15"
[ 8.712] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 8.715] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 8.716] (II) event15 - Logitech USB Receiver: device is a keyboard
[ 8.718] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event16)
[ 8.718] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 8.718] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 8.718] (**) Logitech USB Receiver Mouse: always reports core events
[ 8.718] (**) Option "Device" "/dev/input/event16"
[ 8.721] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 8.722] (II) event16 - Logitech USB Receiver Mouse: device is a pointer
[ 8.722] (II) event16 - Logitech USB Receiver Mouse: device removed
[ 8.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:046D:C52B.0002/input/input17/event16"
[ 8.740] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 12)
[ 8.740] (**) Option "AccelerationScheme" "none"
[ 8.740] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 8.740] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 8.740] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 8.744] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 8.744] (II) event16 - Logitech USB Receiver Mouse: device is a pointer
[ 8.746] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse1)
[ 8.746] (II) No input driver specified, ignoring this device.
[ 8.746] (II) This device may have been added with another device file.
[ 8.748] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event17)
[ 8.748] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.748] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 8.748] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 8.748] (**) Option "Device" "/dev/input/event17"
[ 8.751] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 8.751] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 8.752] (II) event17 - Logitech USB Receiver Consumer Control: device removed
[ 8.762] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 8.762] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:046D:C52B.0002/input/input18/event17"
[ 8.762] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 13)
[ 8.762] (**) Option "AccelerationScheme" "none"
[ 8.762] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 8.762] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 8.762] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 8.765] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 8.766] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 8.768] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event18)
[ 8.768] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 8.768] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 8.768] (**) Logitech USB Receiver System Control: always reports core events
[ 8.768] (**) Option "Device" "/dev/input/event18"
[ 8.771] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 8.771] (II) event18 - Logitech USB Receiver System Control: device is a keyboard
[ 8.772] (II) event18 - Logitech USB Receiver System Control: device removed
[ 8.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:046D:C52B.0002/input/input19/event18"
[ 8.784] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 14)
[ 8.787] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 8.788] (II) event18 - Logitech USB Receiver System Control: device is a keyboard
[ 8.790] (II) config/udev: Adding input device Keychron Keychron K2 (/dev/input/event19)
[ 8.790] (**) Keychron Keychron K2: Applying InputClass "libinput keyboard catchall"
[ 8.790] (II) Using input driver 'libinput' for 'Keychron Keychron K2'
[ 8.790] (**) Keychron Keychron K2: always reports core events
[ 8.790] (**) Option "Device" "/dev/input/event19"
[ 8.793] (II) event19 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 8.793] (II) event19 - Keychron Keychron K2: device is a keyboard
[ 8.794] (II) event19 - Keychron Keychron K2: device removed
[ 8.806] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:05AC:024F.0004/input/input21/event19"
[ 8.806] (II) XINPUT: Adding extended input device "Keychron Keychron K2" (type: KEYBOARD, id 15)
[ 8.809] (II) event19 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 8.810] (II) event19 - Keychron Keychron K2: device is a keyboard
[ 8.812] (II) config/udev: Adding input device Keychron Keychron K2 (/dev/input/event20)
[ 8.812] (**) Keychron Keychron K2: Applying InputClass "libinput keyboard catchall"
[ 8.812] (II) Using input driver 'libinput' for 'Keychron Keychron K2'
[ 8.812] (**) Keychron Keychron K2: always reports core events
[ 8.812] (**) Option "Device" "/dev/input/event20"
[ 8.815] (II) event20 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 8.816] (II) event20 - Keychron Keychron K2: device is a keyboard
[ 8.816] (II) event20 - Keychron Keychron K2: device removed
[ 8.828] (II) libinput: Keychron Keychron K2: needs a virtual subdevice
[ 8.828] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:05AC:024F.0005/input/input22/event20"
[ 8.828] (II) XINPUT: Adding extended input device "Keychron Keychron K2" (type: MOUSE, id 16)
[ 8.828] (**) Option "AccelerationScheme" "none"
[ 8.828] (**) Keychron Keychron K2: (accel) selected scheme none/0
[ 8.828] (**) Keychron Keychron K2: (accel) acceleration factor: 2.000
[ 8.828] (**) Keychron Keychron K2: (accel) acceleration threshold: 4
[ 8.831] (II) event20 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 8.832] (II) event20 - Keychron Keychron K2: device is a keyboard
[ 8.834] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event14)
[ 8.834] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[ 8.834] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[ 8.834] (**) Integrated_Webcam_HD: Integrate: always reports core events
[ 8.834] (**) Option "Device" "/dev/input/event14"
[ 8.836] (II) event14 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 8.836] (II) event14 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 8.837] (II) event14 - Integrated_Webcam_HD: Integrate: device removed
[ 8.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15/event14"
[ 8.852] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 17)
[ 8.855] (II) event14 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 8.855] (II) event14 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 8.856] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 8.856] (II) No input driver specified, ignoring this device.
[ 8.856] (II) This device may have been added with another device file.
[ 8.857] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10)
[ 8.857] (II) No input driver specified, ignoring this device.
[ 8.857] (II) This device may have been added with another device file.
[ 8.858] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11)
[ 8.858] (II) No input driver specified, ignoring this device.
[ 8.858] (II) This device may have been added with another device file.
[ 8.858] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event12)
[ 8.858] (II) No input driver specified, ignoring this device.
[ 8.858] (II) This device may have been added with another device file.
[ 8.859] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event13)
[ 8.859] (II) No input driver specified, ignoring this device.
[ 8.859] (II) This device may have been added with another device file.
[ 8.860] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event8)
[ 8.860] (II) No input driver specified, ignoring this device.
[ 8.860] (II) This device may have been added with another device file.
[ 8.861] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 8.861] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.861] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 8.861] (**) AT Translated Set 2 keyboard: always reports core events
[ 8.861] (**) Option "Device" "/dev/input/event6"
[ 8.863] (II) event6 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 8.864] (II) event6 - AT Translated Set 2 keyboard: device is a keyboard
[ 8.866] (II) event6 - AT Translated Set 2 keyboard: device removed
[ 8.878] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[ 8.878] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 8.880] (II) event6 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 8.880] (II) event6 - AT Translated Set 2 keyboard: device is a keyboard
[ 8.884] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 8.884] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 8.884] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 8.884] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 8.884] (II) LoadModule: "synaptics"
[ 8.884] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 8.893] (II) Module synaptics: vendor="X.Org Foundation"
[ 8.893] compiled for 1.21.1.4, module version = 1.9.2
[ 8.893] Module class: X.Org XInput Driver
[ 8.893] ABI class: X.Org XInput driver, version 24.4
[ 8.893] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 8.893] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 8.893] (**) Option "Device" "/dev/input/event7"
[ 8.905] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3220 (res 31)
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2422 (res 31)
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 8.905] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 8.905] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 8.905] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 8.917] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[ 8.917] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[ 8.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 8.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 8.917] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.050
[ 8.917] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 8.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 8.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 8.917] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 8.917] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 8.918] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 8.918] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 8.928] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.928] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 8.928] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 8.928] (**) Option "Device" "/dev/input/event17"
[ 8.928] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 8.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.1/0003:046D:C52B.0002/input/input18/event17"
[ 8.928] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 20)
[ 8.928] (**) Keychron Keychron K2: Applying InputClass "libinput keyboard catchall"
[ 8.928] (II) Using input driver 'libinput' for 'Keychron Keychron K2'
[ 8.929] (**) Keychron Keychron K2: always reports core events
[ 8.929] (**) Option "Device" "/dev/input/event20"
[ 8.929] (II) libinput: Keychron Keychron K2: is a virtual subdevice
[ 8.929] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:05AC:024F.0005/input/input22/event20"
[ 8.929] (II) XINPUT: Adding extended input device "Keychron Keychron K2" (type: KEYBOARD, id 21)
[ 18.901] (II) event3 - Power Button: device removed
[ 18.906] (II) event4 - Video Bus: device removed
[ 18.918] (II) event5 - Video Bus: device removed
[ 18.930] (II) event1 - Power Button: device removed
[ 18.936] (II) event0 - Sleep Button: device removed
[ 18.942] (II) event15 - Logitech USB Receiver: device removed
[ 18.948] (II) event16 - Logitech USB Receiver Mouse: device removed
[ 18.960] (II) event18 - Logitech USB Receiver System Control: device removed
[ 18.967] (II) event19 - Keychron Keychron K2: device removed
[ 18.976] (II) event14 - Integrated_Webcam_HD: Integrate: device removed
[ 18.988] (II) event6 - AT Translated Set 2 keyboard: device removed
[ 19.006] (II) event17 - Logitech USB Receiver Consumer Control: device removed
[ 19.012] (II) event20 - Keychron Keychron K2: device removed
[ 3316.761] (II) NVIDIA(0): Setting mode "NULL"
[ 3316.764] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3316.764] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3316.764] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3316.764] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3316.764] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3316.764] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3316.764] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3316.764] (II) NVIDIA(0): Config Options in the README.
[ 3316.768] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 3316.769] (II) event3 - Power Button: device is a keyboard
[ 3316.769] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 3316.769] (II) event4 - Video Bus: device is a keyboard
[ 3316.770] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 3316.770] (II) event5 - Video Bus: device is a keyboard
[ 3316.770] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 3316.771] (II) event1 - Power Button: device is a keyboard
[ 3316.771] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 3316.771] (II) event0 - Sleep Button: device is a keyboard
[ 3316.772] (II) event15 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 3316.772] (II) event15 - Logitech USB Receiver: device is a keyboard
[ 3316.773] (II) event16 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 3316.773] (II) event16 - Logitech USB Receiver Mouse: device is a pointer
[ 3316.774] (II) event17 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 3316.774] (II) event17 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 3316.776] (II) event18 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 3316.776] (II) event18 - Logitech USB Receiver System Control: device is a keyboard
[ 3316.777] (II) event19 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 3316.777] (II) event19 - Keychron Keychron K2: device is a keyboard
[ 3316.778] (II) event20 - Keychron Keychron K2: is tagged by udev as: Keyboard
[ 3316.778] (II) event20 - Keychron Keychron K2: device is a keyboard
[ 3316.779] (II) event14 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 3316.779] (II) event14 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 3316.780] (II) event6 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 3316.780] (II) event6 - AT Translated Set 2 keyboard: device is a keyboard
[ 3316.780] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
|
Kind Regards,
_________________
Details fueled any investigation ... |
|
| Back to top |
|
 |
Zucca
Moderator
Joined: 14 Jun 2007
Posts: 3355
Location: Rasi, Finland
|
| Posted: Mon Aug 08, 2022 8:58 am Post subject: |
|
|
Make sure elogind starts at boot runlevel.
I remember having similar issues some time back.
_________________
..: Zucca :..
Gentoo IRC channels reside on Libera.Chat.
--
| Quote: | | I am NaN! I am a man! |
|
|
| Back to top |
|
|
Hieronymus Bosch
Tux's lil' helper
Joined: 29 Jan 2015
Posts: 83
Location: 31°45′33.14″N 106°29′24.63″W
|
| Posted: Mon Aug 08, 2022 12:03 pm Post subject: |
|
|
I changed the elogind service to boot, it was in default. My "quick" fix was to install gnome/wayland, I can start the graphical interface without issue but the ones that uses X like awesome or even xfce4 are not working.
I will continue checking the logs after work.
_________________
Details fueled any investigation ... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
