GianGian2387
Apprentice
Joined: 03 Jun 2021
Posts: 157
|
 Posted: Mon Jan 24, 2022 9:38 am Post subject: Problema Aggiornamento |
 |
|
Buongirono a tutti,
ho eseguito l'aggiornmento di sistema, alla fine degli aggiornamenti mi consigliava di dare il comando: dispatch-conf, una volta dato ho ricevuto questo:
| Quote: |
-# Enable color output in genkernel
-NOCOLOR="false"
-
-# Clear build cache dir on gernkernel start
-#CLEAR_CACHEDIR="no"
-
-# Clear all tmp files and caches after genkernel has run
-#POSTCLEAR="no"
-
-# Check for x MB free disk space in BOOTDIR
-#CHECK_FREE_DISK_SPACE_BOOTDIR=0
-
-# Check for x MB free disk space in kernel outputdir
-#CHECK_FREE_DISK_SPACE_KERNELOUTPUTDIR=0
-
-# Genkernel uses an independent configuration for MAKEOPTS, and does not source
-# /etc/portage/make.conf . You can override the default setting by uncommenting
-# and tweaking the following line. Default setting is set up by
-# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
-# argument is: <number of processors>*<number of cores per processor>+1
-#MAKEOPTS="$(portageq envvar MAKEOPTS)"
-
-# Run the kernel make at the following NICE level
-#NICE=10
-
-# Add bcache support
-#BCACHE="no"
-
-# Add LVM support
-#LVM="no"
-
-# Add LUKS support
-#LUKS="no"
-
-# Add GnuPG support
-#GPG="no"
-
-# Add in early microcode support: this sets the kernel options for early microcode loading
-# Possible values: empty/"no", "all", "intel", "amd"
-#MICROCODE="all"
-
-# Include early microcode in generated initramfs.
-# Only needed if system cannot load multiple initramfs.
-# NOTE: >=sys-boot/grub-2 will detect and auto-load {amd,intel}-uc.img file
-# provided by sys-firmware/intel-microcode[initramfs] or
-# sys-kernel/linux-firmware[initramfs].
-#MICROCODE_INITRAMFS="no"
-
-# Add NFS support
-#NFS="no"
-
-# Add DMRAID support
-#DMRAID="no"
-
-# Add SSH support
-#SSH="no"
-
-# Add b2sum support
-#B2SUM="no"
-
-# Include busybox in the initramfs. If included, busybox is rebuilt
-# if the cached copy is out of date.
-#BUSYBOX="yes"
-
-# Add MDRAID support
-#MDADM="no"
-
-# Specify a custom mdadm.conf.
-# By default the initramfs will be built *without* an mdadm.conf and will auto-detect
-# arrays during bootup. Usually, this should not be needed.
-#MDADM_CONFIG="/etc/mdadm.conf"
-
-# Add Multipath support
-#MULTIPATH="no"
-
-# Add iSCSI support
-#ISCSI="no"
-
-# Add e2fsprogs support
-#E2FSPROGS="no"
-
-# Include support for unionfs
-#UNIONFS="no"
-
-# Include support for zfs volume management. If unset, genkernel will attempt
-# to autodetect and enable this when rootfs is on zfs.
-#ZFS="no"
-
-# Add BTRFS support
-#BTRFS="no"
-
-# Add xfsprogs support
-#XFSPROGS="no"
-
-# Install firmware onto root filesystem
-# Will conflict with sys-kernel/linux-firmware package
-#FIRMWARE_INSTALL="no"
-
-# Add firmware(s) to initramfs
-#FIRMWARE="no"
-
-# Specify directory to pull from
-#FIRMWARE_DIR="/lib/firmware"
-
-# Specify a comma-separated list of firmware files or directories to include,
-# relative to FIRMWARE_DIR. If empty or unset, the full contents of
-# FIRMWARE_DIR will be included (if FIRMWARE option above is set to YES).
-#FIRMWARE_FILES=""
-
-# Add new kernel to grub
-# Possible values: empty/"no", "grub", "grub2"
-#BOOTLOADER="no"
-
-# Use sandbox when building initramfs
-#SANDBOX="yes"
-
-# Embed and set font early on boot
-# Possible values: empty/"none", "current", <PSF file>
-#BOOTFONT="none"
-
-# Add boot splash using splashutils
-#SPLASH="no"
-
-# Use this splash theme. If commented out - the "default" name theme is used.
-# Also, SPLASH="yes" needs to be enabled for this one to work.
-# This supersedes the "SPLASH_THEME" option in '/etc/conf.d/splash'.
-#SPLASH_THEME="gentoo"
-
-# Run "emerge @module-rebuild" automatically when possible and necessary
-# after kernel and modules have been compiled
-#MODULEREBUILD="yes"
-
-# Run the specified command in the current environment after the kernel and
-# modules have been compiled, useful to rebuild external kernel module
-# (see MODULEREBUILD above) or installing additional
-# files (use 'copy_image_with_preserve dtb path/to/dtb dtb <kernelname>')
-#CMD_CALLBACK=""
-
-
-# =========Keymap Settings=========
-#
-# Force keymap selection at boot
-#DOKEYMAPAUTO="no"
-
-# Enables keymap selection support
-#KEYMAP="yes"
-
-
-# =========Low Level Compile Settings=========
-#
-# Assembler to use for the kernel. See also the --kernel-as command line
-# option.
-#KERNEL_AS="as"
-
-# Archiver to use for the kernel. See also the --kernel-ar command line
-# option.
-#KERNEL_AR="ar"
-
-# Compiler to use for the kernel (e.g. distcc). See also the --kernel-cc
-# command line option.
-#KERNEL_CC="gcc"
-
-# Linker to use for the kernel. See also the --kernel-ld command line option.
-#KERNEL_LD="ld"
-
-# NM utility to use for the kernel. See also the --kernel-nm command line option.
-#KERNEL_NM="nm"
-
-# GNU Make to use for kernel. See also the --kernel-make command line option.
-#KERNEL_MAKE="make"
-
-# Assembler to use for the utilities. See also the --utils-as command line
-# option.
-#UTILS_AS="as"
-
-# Archiver to use for the utilities. See also the --utils-ar command line
-# option.
-#UTILS_AR="ar"
-
-# C Compiler to use for the utilities (e.g. distcc). See also the --utils-cc
-# command line option.
-#UTILS_CC="gcc"
-
-# C++ Compiler to use for the utilities (e.g. distcc). See also the --utils-cxx
-# command line option.
-#UTILS_CXX="g++"
-
-# Linker to use for the utilities. See also the --utils-ld command line
-# option.
-#UTILS_LD="ld"
-
-# NM utility to use for the utilities. See also the --utils-nm command line option.
-#UTILS_NM="nm"
-
-# GNU Make to use for the utilities. See also the --utils-make command line
-# option.
-#UTILS_MAKE="make"
-
-# Target triple (i.e. aarch64-linux-gnu) to build for. If you do not
-# cross-compile, leave blank for auto detection.
-#CROSS_COMPILE=""
-
-# Override default make target (bzImage). See also the --kernel-target
-# command line option. Useful to build a uImage on arm.
-#KERNEL_MAKE_DIRECTIVE_OVERRIDE="fooImage"
-
-# Override default kernel binary path. See also the --kernel-binary
-# command line option. Useful to install a uImage on arm.
-#KERNEL_BINARY_OVERRIDE="arch/foo/boot/bar"
-
-
-# =========GENKERNEL LOCATION CONFIGURATION============
-#
-# Variables:
-# %%ARCH%% - Final determined architecture
-# %%CACHE%% - Final determined cache location
-
-# Set genkernel's temporary work directory
-#TMPDIR="/var/tmp/genkernel"
-
-# Set the boot directory, default is /boot
-#BOOTDIR="/boot"
-
-# Default share directory location
-GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
-
-# Location of the default cache
-CACHE_DIR="/var/cache/genkernel"
-
-# Location of DISTDIR, where our source tarballs are stored
-DISTDIR="${GK_SHARE}/distfiles"
-
-# Log output file
-LOGFILE="/var/log/genkernel.log"
-
-# Debug Level
-LOGLEVEL=1
-
-
-# =========COMPILED UTILS CONFIGURATION============
-#
-# Default location of kernel source
-DEFAULT_KERNEL_SOURCE="/usr/src/linux"
-
-# Default kernel config (only use to override using
-# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !)
-#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-config"
-
-# Specifies a user created busybox config
-#BUSYBOX_CONFIG="/path/to/file"
-
-# NOTE: Since genkernel 3.4.41 the version of
-# busybox, lvm, mdadm, ... have been moved to
-# /usr/share/genkernel/defaults/software.sh in order to
-# reduce the merging you have to do during etc-update.
-# You can still override these settings in here.
-
-
-# =========MISC KERNEL CONFIGURATION============
-#
-# Set kernel filename which will be used when kernel will be installed
-# into BOOTDIR. See man page to learn more about available placeholders.
-#KERNEL_FILENAME="vmlinuz-%%KV%%"
-
-# Set kernel symlink name which will be used when kernel will be installed
-# into BOOTDIR and SYMLINK option is enabled
-#KERNEL_SYMLINK_NAME="kernel"
-
-# This option will set kernel option CONFIG_LOCALVERSION.
-# Use special value "UNSET" to unset already set CONFIG_LOCALVERSION.
-#KERNEL_LOCALVERSION="-%%ARCH%%"
-
-# This option is only valid if kerncache is
-# defined. If there is a valid kerncache no checks
-# will be made against a kernel source tree.
-#KERNEL_SOURCES="yes"
-
-# Build a static (monolithic kernel)
-#BUILD_STATIC="no"
-
-# Make and install kernelz image (PowerPC)
-#GENZIMAGE="no"
-
-# Archive file created using tar containing kernel binary, content
-# of /lib/modules and the kernel config.
-# NOTE: Archive is created before the callbacks are run!
-#KERNCACHE="/path/to/file.tar.xz"
-
-# Prefix to kernel module destination, modules
-# will be installed in <prefix>/lib/modules
-#KERNEL_MODULES_PREFIX=""
-
-
-# =========MISC INITRAMFS CONFIGURATION============
-#
-# Set initramfs filename which will be used when initramfs will be
-# installed into BOOTDIR. See man page to learn more about available
-# placeholders.
-#INITRAMFS_FILENAME="initramfs-%%KV%%.img"
-
-# Set initramfs symlink name which will be used when initramfs will be
-# installed into BOOTDIR and SYMLINK option is enabled
-#INITRAMFS_SYMLINK_NAME="initramfs"
-
-# Copy all compiled kernel modules to the initramfs
-#ALLRAMDISKMODULES="no"
-
-# Copy selected modules to the initramfs based on arch-specific modules_load file
-#RAMDISKMODULES="yes"
-
-# Archive file created using tar containing kernel and initramfs.
-# NOTE: No modules outside of the initramfs will be included!
-#MINKERNPACKAGE="/path/to/file.tar.xz"
-
-# Add additional modules to the initramfs using the module groups defined
-# in /usr/share/genkernel/defaults/modules_load (see this file for
-# more details). This would be used if, for example, you
-# required an additional crypto module or network device at boot
-# time and did not want to statically compile these in the kernel.
-# Options take the form AMODULES_{group} where {group} is one of
-# the groups in modules_load (which are in the form MODULES_{group}).
-# Use this with caution.
-#AMODULES_group="module-to-include another-module"
-
-# Override the default modules in the initramfs, for a given group, as defined by
-# /usr/share/genkernel/defaults/modules_load and the per-arch modules_load
-# files. You PROBABLY want to use AMODULES_* above, and NOT MODULES_* here.
-# If you use MODULES_* here, the default and per-arch modules will NOT be used.
-#MODULES_group1="some-module"
-#MODULES_group2="" # Load no modules for this group
-
-# Override the default used linuxrc script.
-#LINUXRC="/path/to/custom/linuxrc"
-
-# Archive file created using tar containing modules after
-# the callbacks have run
-#MODULESPACKAGE="/path/to/file.tar.xz"
-
-# Directory structure to include in the initramfs,
-# only available on >=2.6 kernels
-#INITRAMFS_OVERLAY=""
-
-# Build the generated initramfs into the kernel instead of
-# keeping it as a separate file
-#INTEGRATED_INITRAMFS="no"
-
-# Compress generated initramfs
-#COMPRESS_INITRD="yes"
-
-# Types of compression: best, xz, lzma, bzip2, gzip, lzop, lz4, zstd, fastest
-# "best" selects the best available compression method
-# "fastest" selects the fastest available compression method
-#COMPRESS_INITRD_TYPE="best"
-
-# wrap initramfs using mkimage for u-boot bootloader
-# WRAP_INITRD=no
-
-# Create a self-contained env in the initramfs
-#NETBOOT="no"
-
-
-# =========MISC BOOT CONFIGURATION============
-#
-# Specify a default for real_root=
-#REAL_ROOT="/dev/one/two/gentoo"
>> (1 of 7) -- /etc/genkernel.conf
>> q quit, h help, n next, e edit-new, z zap-new, u use-new
m merge, t toggle-merge, l look-merge:
|
se premo "m":
| Quote: | <
# Embed and set font early on boot <
# Possible values: empty/"none", "current", <PSF file> <
#BOOTFONT="none" <
<
# Add boot splash using splashutils <
#SPLASH="no" <
<
# Use this splash theme. If commented out - the "default" nam <
# Also, SPLASH="yes" needs to be enabled for this one to work <
# This supersedes the "SPLASH_THEME" option in '/etc/conf.d/s <
#SPLASH_THEME="gentoo" <
<
# Run "emerge @module-rebuild" automatically when possible an <
# after kernel and modules have been compiled <
#MODULEREBUILD="yes" <
<
# Run the specified command in the current environment after <
# modules have been compiled, useful to rebuild external kern <
# (see MODULEREBUILD above) or installing additional <
# files (use 'copy_image_with_preserve dtb path/to/dtb dtb <k <
#CMD_CALLBACK="" <
<
<
# =========Keymap Settings========= <
# <
# Force keymap selection at boot <
#DOKEYMAPAUTO="no" <
<
# Enables keymap selection support <
#KEYMAP="yes" <
<
<
# =========Low Level Compile Settings========= <
# <
# Assembler to use for the kernel. See also the --kernel-as <
# option. <
#KERNEL_AS="as" <
<
# Archiver to use for the kernel. See also the --kernel-ar c <
# option. <
#KERNEL_AR="ar" <
<
# Compiler to use for the kernel (e.g. distcc). See also the <
# command line option. <
#KERNEL_CC="gcc" <
<
# Linker to use for the kernel. See also the --kernel-ld com <
#KERNEL_LD="ld" <
<
# NM utility to use for the kernel. See also the --kernel-nm <
#KERNEL_NM="nm" <
<
# GNU Make to use for kernel. See also the --kernel-make com <
#KERNEL_MAKE="make" <
<
# Assembler to use for the utilities. See also the --utils-a <
# option. <
#UTILS_AS="as" <
<
# Archiver to use for the utilities. See also the --utils-ar <
# option. <
#UTILS_AR="ar" <
<
# C Compiler to use for the utilities (e.g. distcc). See als <
# command line option. <
#UTILS_CC="gcc" <
<
# C++ Compiler to use for the utilities (e.g. distcc). See a <
# command line option. <
#UTILS_CXX="g++" <
<
# Linker to use for the utilities. See also the --utils-ld c <
# option. <
#UTILS_LD="ld" <
<
# NM utility to use for the utilities. See also the --utils- <
#UTILS_NM="nm" <
<
# GNU Make to use for the utilities. See also the --utils-ma <
# option. <
#UTILS_MAKE="make" <
<
# Target triple (i.e. aarch64-linux-gnu) to build for. If you <
# cross-compile, leave blank for auto detection. <
#CROSS_COMPILE="" <
<
# Override default make target (bzImage). See also the --kern <
# command line option. Useful to build a uImage on arm. <
#KERNEL_MAKE_DIRECTIVE_OVERRIDE="fooImage" <
<
# Override default kernel binary path. See also the --kernel- <
# command line option. Useful to install a uImage on arm. <
#KERNEL_BINARY_OVERRIDE="arch/foo/boot/bar" <
<
<
# =========GENKERNEL LOCATION CONFIGURATION============ <
# <
# Variables: <
# %%ARCH%% - Final determined architecture <
# %%CACHE%% - Final determined cache location <
<
# Set genkernel's temporary work directory <
#TMPDIR="/var/tmp/genkernel" <
<
# Set the boot directory, default is /boot <
#BOOTDIR="/boot" <
<
# Default share directory location <
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}" <
<
# Location of the default cache <
CACHE_DIR="/var/cache/genkernel" <
<
# Location of DISTDIR, where our source tarballs are stored <
DISTDIR="${GK_SHARE}/distfiles" <
<
# Log output file <
LOGFILE="/var/log/genkernel.log" <
<
# Debug Level <
LOGLEVEL=1 <
<
<
# =========COMPILED UTILS CONFIGURATION============ <
# <
# Default location of kernel source <
DEFAULT_KERNEL_SOURCE="/usr/src/linux" <
<
# Default kernel config (only use to override using <
# arch/%%ARCH%%/kernel-config-${VER}.${PAT} !) <
#DEFAULT_KERNEL_CONFIG="${GK_SHARE}/arch/%%ARCH%%/kernel-conf <
<
# Specifies a user created busybox config <
#BUSYBOX_CONFIG="/path/to/file" <
<
# NOTE: Since genkernel 3.4.41 the version of <
# busybox, lvm, mdadm, ... have been moved to <
# /usr/share/genkernel/defaults/software.sh in order to <
# reduce the merging you have to do during etc-update. <
# You can still override these settings in here. <
<
<
# =========MISC KERNEL CONFIGURATION============ <
# <
# Set kernel filename which will be used when kernel will be <
# into BOOTDIR. See man page to learn more about available pl <
#KERNEL_FILENAME="vmlinuz-%%KV%%" <
<
# Set kernel symlink name which will be used when kernel will <
# into BOOTDIR and SYMLINK option is enabled <
#KERNEL_SYMLINK_NAME="kernel" <
<
# This option will set kernel option CONFIG_LOCALVERSION. <
# Use special value "UNSET" to unset already set CONFIG_LOCAL <
#KERNEL_LOCALVERSION="-%%ARCH%%" <
<
# This option is only valid if kerncache is <
# defined. If there is a valid kerncache no checks <
# will be made against a kernel source tree. <
#KERNEL_SOURCES="yes" <
<
# Build a static (monolithic kernel) <
#BUILD_STATIC="no" <
<
# Make and install kernelz image (PowerPC) <
#GENZIMAGE="no" <
<
# Archive file created using tar containing kernel binary, co <
# of /lib/modules and the kernel config. <
# NOTE: Archive is created before the callbacks are run! <
#KERNCACHE="/path/to/file.tar.xz" <
<
# Prefix to kernel module destination, modules <
# will be installed in <prefix>/lib/modules <
#KERNEL_MODULES_PREFIX="" <
<
<
# =========MISC INITRAMFS CONFIGURATION============ <
# <
# Set initramfs filename which will be used when initramfs wi <
# installed into BOOTDIR. See man page to learn more about av <
# placeholders. <
#INITRAMFS_FILENAME="initramfs-%%KV%%.img" <
<
# Set initramfs symlink name which will be used when initramf <
# installed into BOOTDIR and SYMLINK option is enabled <
#INITRAMFS_SYMLINK_NAME="initramfs" <
<
# Copy all compiled kernel modules to the initramfs <
#ALLRAMDISKMODULES="no" <
<
# Copy selected modules to the initramfs based on arch-specif <
#RAMDISKMODULES="yes" <
<
# Archive file created using tar containing kernel and initra <
# NOTE: No modules outside of the initramfs will be included! <
#MINKERNPACKAGE="/path/to/file.tar.xz" <
<
# Add additional modules to the initramfs using the module gr <
# in /usr/share/genkernel/defaults/modules_load (see this fil <
# more details). This would be used if, for example, you <
# required an additional crypto module or network device at b <
# time and did not want to statically compile these in the ke <
# Options take the form AMODULES_{group} where {group} is one <
# the groups in modules_load (which are in the form MODULES_{ <
# Use this with caution. <
#AMODULES_group="module-to-include another-module" <
<
# Override the default modules in the initramfs, for a given <
# /usr/share/genkernel/defaults/modules_load and the per-arch <
# files. You PROBABLY want to use AMODULES_* above, and NOT M <
# If you use MODULES_* here, the default and per-arch modules <
#MODULES_group1="some-module" <
#MODULES_group2="" # Load no modules for this group <
<
# Override the default used linuxrc script. <
#LINUXRC="/path/to/custom/linuxrc" <
<
# Archive file created using tar containing modules after <
# the callbacks have run <
#MODULESPACKAGE="/path/to/file.tar.xz" <
<
# Directory structure to include in the initramfs, <
# only available on >=2.6 kernels <
#INITRAMFS_OVERLAY="" <
<
# Build the generated initramfs into the kernel instead of <
# keeping it as a separate file <
#INTEGRATED_INITRAMFS="no" <
<
# Compress generated initramfs <
#COMPRESS_INITRD="yes" <
<
# Types of compression: best, xz, lzma, bzip2, gzip, lzop, lz <
# "best" selects the best available compression method <
# "fastest" selects the fastest available compression method <
#COMPRESS_INITRD_TYPE="best" <
<
# wrap initramfs using mkimage for u-boot bootloader <
# WRAP_INITRD=no <
<
# Create a self-contained env in the initramfs <
#NETBOOT="no" <
<
<
# =========MISC BOOT CONFIGURATION============ <
# <
# Specify a default for real_root= <
#REAL_ROOT="/dev/one/two/gentoo" <
%
|
sapreste dirmi cosa dovrei fare? grazie |
|
Forum italiano (Italian)
