Question about installing the kernel on the Pi 4

jgaz · n00b Joined: 14 Feb 2021 Posts: 42

So, the quick install instructions for the Raspberry Pi https://wiki.gentoo.org/wiki/Raspberry_Pi/Quick_Install_Guide say to git clone the official kernel from the upstream git project. But, I see sys-boot/raspberrypi-firmware exists. Isn't the kernel already rolled up into that ebuild? Can't I just emerge that instead?

alamahant · Advocate Joined: 23 Mar 2019 Posts: 3879

Yes
I looked into the ebuild and it apparently installs the files in /boot.
But i couldnt find anything about the actual kernel and the "modules" directory which contains the kernel modules.
Maybe I am mistaken.

The way I do it is

NeddySeagoon · Posted: Wed Dec 01, 2021 5:42 pm Post subject:

Moved from Installing Gentoo to Gentoo on ARM.

The Default kernel uses the Powersave CPU governor by default. That clocks the Pi at 600MHz.
You probably want Ondemand.

Firmware means two different things on the Pi4 on all tho other PIs, is means the content of /boot which mostly runs on the GPU before the ARM CPU is allowed to do anything.
It even loads the kernel and initrd, if there is one.

The PI 4 still need most of that but not bootcode.bin.
On the Pi4, bootcode.bin has been replaced with real firmware is an SPI PROM, so the term is ambiguous.

dev-embedded/rpi-eeprom is about updating the SPI PROM 'firmware'.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.