| View previous topic :: View next topic |
| Author |
Message |
doskanoness
n00b
Joined: 06 Oct 2021
Posts: 45
|
 Posted: Sat Nov 06, 2021 5:58 pm Post subject: NetworkManager has started, but is inactive |
 |
|
| Hello, I have a problem with the lxd service not starting until I connect to the Wi-Fi or to the LAN network. I use OpenRC as the init system. When NetworkManager is started at system boot, I'm getting a warning "NetworkManager has started, but is inactive". What can I do to be able to use services dependent on the NetworkManager when I'm not connected yet to any network? Thanks. |
|
| Back to top |
|
 |
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3879
|
| Posted: Sat Nov 06, 2021 6:04 pm Post subject: |
|
|
Hi
if you have also netifrc ie the traditional Gentoo network config then at least disable ALL net.<iface-name> services you have enabled.
If not plz try
| Code: |
nmcli con show
and
ip a
|
Do you see any connections and ifaces?
_________________
 |
|
| Back to top |
|
|
doskanoness
n00b
Joined: 06 Oct 2021
Posts: 45
|
| Posted: Sat Nov 06, 2021 6:15 pm Post subject: |
|
|
| alamahant wrote: | Hi
if you have also netifrc ie the traditional Gentoo network config then at least disable ALL net.<iface-name> services you have enabled.
|
I have disabled them.
| alamahant wrote: |
If not plz try
| Code: |
nmcli con show
and
ip a
|
|
| Code: | doskanoness@gentoo ~ $ nmcli con show
NAME UUID TYPE DEVICE
mlvd-bg4 90bacea0-51e6-4254-8b89-3448fb88f6c7 wireguard --
NETIASPOT-761BF0 72ff5635-a54d-473d-ae7a-3990c69aa598 wifi --
NETIASPOT-761BF0 b7330cc9-4ccd-43b2-b0a7-889730865bcc wifi --
Wired connection 1 f090c7a2-410f-3eeb-bc23-75e980b75b74 ethernet --
doskanoness@gentoo ~ $ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp5s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:d8:61:05:9b:29 brd ff:ff:ff:ff:ff:ff
3: wlo1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether c6:d8:5a:1f:7f:ac brd ff:ff:ff:ff:ff:ff permaddr 48:a4:72:af:6e:d2
altname wlp0s20f3 |
| alamahant wrote: |
Do you see any connections and ifaces?
|
I don't see lxdbr0 interface. |
|
| Back to top |
|
|
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3879
|
| Posted: Sat Nov 06, 2021 6:34 pm Post subject: |
|
|
Your eth interface is down.
What happens if you run
| Code: |
ip link set enp5s0 up
ip a add <some-lan-ip>/24 dev enp5s0
ip route add default via <router-ip>
ping 8.8.8.8
|
Does it work?
Also
| Code: |
rc-status boot default
|
_________________
|
|
| Back to top |
|
|
doskanoness
n00b
Joined: 06 Oct 2021
Posts: 45
|
| Posted: Sat Nov 06, 2021 6:43 pm Post subject: |
|
|
| alamahant wrote: | | What happens if you run |
| Code: |
┌─[doskanoness@gentoo] - [~] - [2021-11-06 07:59:15]
└─[0] <> sudo ip link set enp5s0 up ⚡[▶▶▶▶▶▶▶▶▶▷]
┌─[doskanoness@gentoo] - [~] - [2021-11-06 07:59:18]
└─[0] <> sudo ip a add 192.168.1.12/24 dev enp5s0 ⚡[▶▶▶▶▶▶▶▶▶▷]
┌─[doskanoness@gentoo] - [~] - [2021-11-06 07:59:40]
└─[0] <> sudo ip route add default via 192.168.1.254 ⚡[▶▶▶▶▶▶▶▶▶▷]
┌─[doskanoness@gentoo] - [~] - [2021-11-06 08:00:18]
└─[1] <> ping 8.8.8.8 ⚡[▶▶▶▶▶▶▶▶▶▷]
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=56 time=116 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=56 time=10.1 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=56 time=10.7 ms
^C
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 10.062/45.661/116.255/49.917 ms
|
| alamahant wrote: |
Also
| Code: |
rc-status boot default
|
|
| Code: | ┌─[doskanoness@gentoo] - [~] - [2021-11-06 07:42:06]
└─[0] <> rc-status boot default ⚡[▶▶▶▶▶▶▶▶▶▷]
Runlevel: boot
zfs-import [ started ]
hwclock [ started ]
modules [ started ]
fsck [ started ]
root [ started ]
mtab [ started ]
swap [ started ]
zfs-mount [ started ]
localmount [ started ]
ip6tables [ started ]
termencoding [ started ]
sysctl [ started ]
bootmisc [ started ]
keymaps [ started ]
save-keymaps [ started ]
save-termencoding [ started ]
procfs [ started ]
consolefont [ started ]
urandom [ started ]
stmpfiles-setup [ started ]
loopback [ started ]
binfmt [ started ]
iptables [ started ]
hostname [ started ]
Runlevel: default
hdparm [ started ]
sysklogd [ started ]
cronie [ started ]
haveged [ started ]
NetworkManager [ started ]
acpid [ started ]
laptop_mode [ started ]
zfs-zed [ started ]
zfs-share [ started ]
thermald [ started ]
cupsd [ started ]
netmount [ started ]
gpm [ started ]
display-manager [ started ]
lm_sensors [ started ]
lxd [ started ]
modemmanager [ crashed ]
local |
|
|
| Back to top |
|
|
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3879
|
| Posted: Sat Nov 06, 2021 7:07 pm Post subject: |
|
|
Ok perfect you can bring your iface up and ping outside.
Maybe try restarting NM.
What does
| Code: |
grep -i networkmanager /var/log/messages
dmesg | grep -i networkmanager
|
say?
Was is ever working properly?
Maybe recreate the NM connections
| Code: |
nmcli con add type ethernet autoconnect yes con-name eth0 ifname enp5s0 ip4 <any-lan-ip>/24 gw4 <router-ip>
nmcli con mod eth0 ipv4.dns <preferred-dns-server-ip> ipv4.method manual
nmcli con up eth0
|
If you want to use dhcp I am not sure if NM has its own dhcp client by default OR you need to build it with USE="dhcpcd OR dhclient".
_________________
|
|
| Back to top |
|
|
doskanoness
n00b
Joined: 06 Oct 2021
Posts: 45
|
| Posted: Thu Nov 11, 2021 7:19 pm Post subject: |
|
|
| Code: | ┌─[doskanoness@gentoo] - [~] - [2021-11-11 08:11:19]
└─[0] <> grep -i networkmanager /var/log/messages ⚡[▶▶▶▶▶▶▶▶▶▷]
Nov 11 14:00:39 gentoo kernel: [ 8417] 0 8417 62426 699 106496 0 0 NetworkManager
Nov 11 14:00:39 gentoo kernel: [ 8417] 0 8417 62426 699 106496 0 0 NetworkManager
Nov 11 14:00:39 gentoo kernel: [ 8417] 0 8417 62426 699 106496 0 0 NetworkManager
Nov 11 14:15:26 gentoo kernel: [ 8417] 0 8417 62426 738 106496 0 0 NetworkManager
Nov 11 14:32:45 gentoo kernel: [ 8417] 0 8417 62459 771 106496 0 0 NetworkManager
Nov 11 15:35:20 gentoo kernel: [ 9113] 0 9113 62426 724 114688 0 0 NetworkManager
Nov 11 15:35:20 gentoo kernel: [ 9113] 0 9113 62426 724 114688 0 0 NetworkManager
Nov 11 15:39:01 gentoo kernel: [ 11774] 0 11774 62351 619 118784 0 0 NetworkManager
Nov 11 15:39:01 gentoo kernel: [ 11774] 0 11774 62351 619 118784 0 0 NetworkManager
Nov 11 19:20:09 gentoo kernel: [ 8444] 0 8444 62448 757 110592 0 0 NetworkManager
Nov 11 19:24:10 gentoo kernel: [ 8444] 0 8444 62448 765 110592 0 0 NetworkManager
┌─[doskanoness@gentoo] - [~] - [2021-11-11 08:18:14]
└─[0] <> dmesg | grep -i networkmanager ⚡[▶▶▶▶▶▶▶▶▶▷]
┌─[doskanoness@gentoo] - [~] - [2021-11-11 08:18:23]
└─[1] <> |
manually adding nm connections work |
|
| Back to top |
|
|
alamahant
Advocate
Joined: 23 Mar 2019
Posts: 3879
|
| Posted: Thu Nov 11, 2021 8:08 pm Post subject: |
|
|
| doskanoness wrote: |
manually adding nm connections work
|
Then recreate them vua nmcli and delete the old ones at least for ethernet.
You have a duplicate wifi con.
_________________
|
|
| Back to top |
|
|
|
Networking & Security
