Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Network Printer
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2  
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Thu Oct 21, 2021 10:16 pm    Post subject: Reply with quote

yes, I used the link you posted, these are the commands:

Quote:
jean@gentoo ~ $ lsusb
Bus 001 Device 004: ID 0dda:2026 Integrated Circuit Solution, Inc. USB2.0 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 25a7:fa67 Areson Technology Corp 2.4G Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04d9:048e Holtek Semiconductor, Inc. Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[ 2.535035] ima: Allocated hash algorithm: sha256
[ 2.535099] ima: No architecture policies found
[ 2.535199] evm: Initialising EVM extended attributes:
[ 2.535250] evm: security.selinux
[ 2.535295] evm: security.ima
[ 2.535340] evm: security.capability
[ 2.535386] evm: HMAC attrs: 0x1
[ 2.535983] PM: Magic number: 9:451:98
[ 2.536213] RAS: Correctable Errors collector initialized.
[ 2.539122] Freeing unused decrypted memory: 2036K
[ 2.540543] Freeing unused kernel image (initmem) memory: 2460K
[ 2.551855] Write protecting the kernel read-only data: 20480k
[ 2.553268] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 2.554224] Freeing unused kernel image (rodata/data gap) memory: 1596K
[ 2.615213] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.615276] rodata_test: all tests were successful
[ 2.615351] x86/mm: Checking user space page tables
[ 2.671832] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.671895] Run /init as init process
[ 2.671942] with arguments:
[ 2.671943] /init
[ 2.671945] with environment:
[ 2.671946] HOME=/
[ 2.671947] TERM=linux
[ 2.671949] BOOT_IMAGE=/vmlinuz-5.10.61-gentoo-x86_64
[ 2.965924] udevd[598]: starting version 3.2.10
[ 2.966328] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.966396] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.966417] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.969031] udevd[599]: starting eudev-3.2.10
[ 3.050767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.054357] ehci-pci: EHCI PCI platform driver
[ 3.054614] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.059727] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.060757] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.060787] ehci-pci 0000:00:1d.7: debug port 1
[ 3.064696] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 3.064927] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfea77c00
[ 3.068709] libphy: r8169: probed
[ 3.068960] r8169 0000:01:00.0 eth0: RTL8102e/RTL8103e, 00:26:18:e0:a3:ea, XID 24c, IRQ 17
[ 3.069623] ata_piix 0000:00:1f.1: version 2.13
[ 3.075258] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.075361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 3.075365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.075367] usb usb1: Product: EHCI Host Controller
[ 3.075369] usb usb1: Manufacturer: Linux 5.10.61-gentoo-x86_64 ehci_hcd
[ 3.075371] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.075649] hub 1-0:1.0: USB hub found
[ 3.075673] hub 1-0:1.0: 8 ports detected
[ 3.081706] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.090732] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.090880] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.090892] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.090923] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 3.091045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 3.091049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.091051] usb usb2: Product: UHCI Host Controller
[ 3.091053] usb usb2: Manufacturer: Linux 5.10.61-gentoo-x86_64 uhci_hcd
[ 3.091055] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.091555] hub 2-0:1.0: USB hub found
[ 3.091585] hub 2-0:1.0: 2 ports detected
[ 3.092194] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.092317] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.092331] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.092375] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 3.092481] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 3.092485] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.092487] usb usb3: Product: UHCI Host Controller
[ 3.092489] usb usb3: Manufacturer: Linux 5.10.61-gentoo-x86_64 uhci_hcd
[ 3.092491] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.093605] hub 3-0:1.0: USB hub found
[ 3.093625] hub 3-0:1.0: 2 ports detected
[ 3.094249] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.094395] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.094407] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.094461] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 3.094993] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 3.094998] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.095000] usb usb4: Product: UHCI Host Controller
[ 3.095002] usb usb4: Manufacturer: Linux 5.10.61-gentoo-x86_64 uhci_hcd
[ 3.095004] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.095289] hub 4-0:1.0: USB hub found
[ 3.095312] hub 4-0:1.0: 2 ports detected
[ 3.095803] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.095942] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.095955] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.095997] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 3.096109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 3.096113] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.096115] usb usb5: Product: UHCI Host Controller
[ 3.096117] usb usb5: Manufacturer: Linux 5.10.61-gentoo-x86_64 uhci_hcd
[ 3.096119] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.096370] hub 5-0:1.0: USB hub found
[ 3.096390] hub 5-0:1.0: 2 ports detected
[ 3.097753] scsi host0: ata_piix
[ 3.098186] scsi host1: ata_piix
[ 3.098293] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.098296] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.098520] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.101872] scsi host2: ata_piix
[ 3.102286] scsi host3: ata_piix
[ 3.102394] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
[ 3.102397] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
[ 3.274952] ata3.00: supports DRM functions and may not be fully accessible
[ 3.274961] ata3.00: ATA-10: CT250MX500SSD1, M3CR023, max UDMA/133
[ 3.274965] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 3.276035] ata3.00: supports DRM functions and may not be fully accessible
[ 3.276954] scsi 2:0:0:0: Direct-Access ATA CT250MX500SSD1 023 PQ: 0 ANSI: 5
[ 3.289541] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.289547] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 3.289576] sd 2:0:0:0: [sda] Write Protect is off
[ 3.289581] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.289623] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.306167] sda: sda1 sda2 sda3
[ 3.318981] sd 2:0:0:0: [sda] supports TCG Opal
[ 3.318987] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.441852] tsc: Refined TSC clocksource calibration: 2199.999 MHz
[ 3.441863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb631c647b, max_idle_ns: 440795226700 ns
[ 3.446563] clocksource: Switched to clocksource tsc
[ 3.458511] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 3.474903] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.579307] random: fast init done
[ 3.659558] usb 2-2: New USB device found, idVendor=04d9, idProduct=048e, bcdDevice= 8.00
[ 3.659642] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.698178] input: HID 04d9:048e as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:04D9:048E.0001/input/input5
[ 3.698523] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.0-2/input0
[ 4.100658] urandom_read: 6 callbacks suppressed
[ 4.100661] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.285201] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 4.458274] usb 3-1: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.10
[ 4.458374] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.458440] usb 3-1: Product: 2.4G Receiver
[ 4.458518] usb 3-1: Manufacturer: CX
[ 4.464915] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:25A7:FA67.0002/input/input6
[ 4.518854] hid-generic 0003:25A7:FA67.0002: input,hidraw1: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:1d.1-1/input0
[ 4.525663] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:25A7:FA67.0003/input/input7
[ 4.526042] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:25A7:FA67.0003/input/input8
[ 4.526305] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:25A7:FA67.0003/input/input9
[ 4.582069] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:25A7:FA67.0003/input/input10
[ 4.582452] hid-generic 0003:25A7:FA67.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:1d.1-1/input1
[ 4.978544] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 5.131106] usb 1-8: New USB device found, idVendor=0dda, idProduct=2026, bcdDevice= 1.4f
[ 5.131111] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.131114] usb 1-8: Product: USB2.0 Card Reader
[ 5.131116] usb 1-8: Manufacturer: ICSI
[ 5.131118] usb 1-8: SerialNumber: 0000001
[ 5.222235] udevd[1208]: starting version 3.2.10
[ 5.265070] udevd[1208]: starting eudev-3.2.10
[ 5.564519] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 5.592063] intel_rng: FWH not detected
[ 5.672517] leds_ss4200: no LED devices found
[ 5.740484] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 5.743355] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.743442] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 5.752759] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 5.755310] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 5.759438] scsi host4: usb-storage 1-8:1.0
[ 5.759679] usbcore: registered new interface driver usb-storage
[ 5.769592] usbcore: registered new interface driver uas
[ 5.808609] coretemp coretemp.0: Using relative temperature scale!
[ 5.809804] coretemp coretemp.0: Using relative temperature scale!
[ 5.817557] intel_powerclamp: No package C-state available
[ 5.844178] intel_powerclamp: No package C-state available
[ 5.908714] iTCO_vendor_support: vendor-support=0
[ 5.918218] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.918284] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 5.942043] gpio_ich gpio_ich.2.auto: GPIO from 462 to 511
[ 5.942702] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.967894] at24 0-0050: supply vcc not found, using dummy regulator
[ 5.971932] at24 0-0050: 256 byte spd EEPROM, read-only
[ 6.040019] pci 0000:00:00.0: Intel G33 Chipset
[ 6.040040] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 6.040165] pci 0000:00:00.0: detected 8192K stolen memory
[ 6.040216] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.040787] Console: switching to colour dummy device 80x25
[ 6.044002] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.054030] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 6.054037] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.054042] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.054045] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.054048] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.054053] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.054057] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.054060] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.059396] i915 0000:00:02.0: [drm] Initialized overlay support.
[ 6.062164] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 6.072731] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.072875] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.073011] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.073153] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.073281] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.077606] fbcon: i915drmfb (fb0) is primary device
[ 6.132668] Console: switching to colour frame buffer device 128x48
[ 6.151533] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 6.630523] EXT4-fs (sda3): re-mounted. Opts: discard
[ 6.773397] scsi 4:0:0:0: Direct-Access ICSI IC1210 CF 1.4F PQ: 0 ANSI: 0 CCS
[ 6.774768] scsi 4:0:0:1: Direct-Access ICSI IC1210 MS 1.4F PQ: 0 ANSI: 0 CCS
[ 6.776040] scsi 4:0:0:2: Direct-Access ICSI IC1210 MMC/SD 1.4F PQ: 0 ANSI: 0 CCS
[ 6.777271] scsi 4:0:0:3: Direct-Access ICSI IC1210 SM 1.4F PQ: 0 ANSI: 0 CCS
[ 6.813175] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.814142] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 6.817763] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 6.824018] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 6.838534] Adding 4198396k swap on /dev/sda2. Priority:-2 extents:1 across:4198396k SSFS
[ 6.938122] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7.442384] elogind-daemon[1764]: New seat seat0.
[ 7.445486] elogind-daemon[1764]: Watching system buttons on /dev/input/event1 (Power Button)
[ 7.445745] elogind-daemon[1764]: Watching system buttons on /dev/input/event0 (Power Button)
[ 7.447967] elogind-daemon[1764]: Watching system buttons on /dev/input/event3 (CX 2.4G Receiver)
[ 7.448337] elogind-daemon[1764]: Watching system buttons on /dev/input/event7 (CX 2.4G Receiver System Control)
[ 7.448721] elogind-daemon[1764]: Watching system buttons on /dev/input/event6 (CX 2.4G Receiver Consumer Control)
[ 8.487328] 8021q: 802.1Q VLAN Support v1.8
[ 8.545476] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.545906] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.545937] Loading firmware: regulatory.db
[ 8.549465] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.549474] cfg80211: failed to load regulatory.db
[ 8.587554] RTL8201CP Ethernet r8169-0-100:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-0-100:00, irq=IGNORE)
[ 8.651070] r8169 0000:01:00.0 enp1s0: Link is Down
[ 10.273725] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 10.273745] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 11.755171] random: crng init done
[ 12.604172] elogind-daemon[1764]: New session c1 of user sddm.
[ 233.918723] elogind-daemon[1764]: New session 1 of user jean.
[ 233.986014] elogind-daemon[1764]: Removed session c1.
[ 266.657377] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 304.744901] perf: interrupt took too long (3147 > 3135), lowering kernel.perf_event_max_sample_rate to 63300
[ 387.100268] perf: interrupt took too long (3940 > 3933), lowering kernel.perf_event_max_sample_rate to 50700
jean@gentoo ~ $

Back to top
View user's profile Send private message
figueroa
Advocate
Advocate


Joined: 14 Aug 2005
Posts: 2913
Location: Edge of marsh USA

PostPosted: Sat Oct 23, 2021 3:22 am    Post subject: Reply with quote

I don't see any Epson or scanner. If you scanner isn't detected by your hardware, there is no way forward.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/17.1/desktop (stable), OpenRC, -systemd -pulseaudio -uefi
Back to top
View user's profile Send private message
GianGian2387
Apprentice
Apprentice


Joined: 03 Jun 2021
Posts: 155

PostPosted: Mon Oct 25, 2021 7:50 pm    Post subject: Reply with quote

I tried to unplug and reattach the printer / scanner cable, now it is recognized thanks for your help and patience
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum