<SOLVED> files for graph.card different to loaded modules

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

Problem with graphical driver (?) for INTEL, all times different to loaded modules !

A newbie inside the gentoo world (since 1 week) with "Acer Emachines 725"-Laptop, built in graphicals card is INTEL GM4500M. Gentoo Linux Version is 5.10.68-distx86_64 Kernel cli: "autoBoot_IMAGE=gentoo ro root=803" Current vers. pixman: 0.40.0 config directory= /usr/share/X11/xorg.conf.d Xorg-Server version: 1.20.13 Xorg ANSI C (Module ABI) = 0.4 XorgVideo-Driver 24.1 Xorg using VT2 Kernel module driver= i915 (vers. 1.6.0) Intel depth= 24 (frame buffer bpp32) Enabled DP1 & VIRTUAL1, set DPI to 96,96 Initial output 1366x768 Output has no monitor: LVDS1,VGA1 VDPAU driver=va-gl setting LVDS1 to 361x203 VideoBus is tagged by udev as Keyboard UNKNOWN OBJECT /org/freedesktop/login1/session/_32 XF86CloseConsole: KDSETMODE failed, VT_GETMODE failed
................................................................................................................................................................................................................................

After "startx" in CLI comes immediately a bright monitor output, without anything, no command line. TTY2 does work for new login (as root).

Checked /var/log/ the xorg.1.log, this says:
XKEYBOARD reported: could not resolve keysym XF86Brightness ................. after study of some discussion I think it is an harmless only info.
Also due to Brightness is given (see former sentence).
But then a lot of RED MARKED lines (more than 200), a conclusion in short follows now:

Load Module INTEL: intel_drv.so compiled for 1.20.13, module version 2.99.917
Load Module GLX: libglx.so compiled for 1.20.13, module version 1.0.0
Load fbdev: fbdev_drv.so compiled for 1.20.13, module version 0.5.0
Load vesa: vesa_drv.so compiled for 1.20.13, module version 2.5.0
Load fbdevhw: fbdevhw.so compiled for 1.20.13, module version 0.0.2
Load Input: libinput_drv.so compiled for 1.20.13, module version 1.1.0
Load Touchpad: synaptics.so compiled for 1.20.13, module version 1.9.1

So finally all 7 so-files which are new compiled >>> are with very different version numbers, partially dramatically different --> high difference

So first question: must I change this 7 so-files by hand with other data? or the version difference equal?
and second question: these different version are the reason why "startx" failed ?
or other (in header) mentioned error messages are a reason for the failure ????

PS: it is a fresh new gentoo system, only "emerge --update --deep system and --deep @world and --depclean were entered.

thank you for any idea or suggestion !!!!!!!!!!!!!!!!!!!!!!!

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

new try after emerging of some ebuilds, check of /var/log/ and now it exists a new Xorg.2.log

Says the following in last lines:
"VideoBus": device removed
systemd-logind: failed to release device: "unknown object" '/org/freedesktop/login1/session/_33'
Unload Module "libinput"
systemd-logind: releasing fd
xfc86CloseConsole: KDSETMODE failed VT-SETMODE failed VT_ACTIVATE failed
Server terminated successfully (0)
Closing log file

Seems to be a missing connection to "freedesktop" or I am wrong..... the other messages from former posting (different versions ....) are still there inside the first part of the Xorg.log-file.

What is the problem? question of an old man -------- PS: didn't found any solution via Google or other sources.
Thank you for reply

PS PS: this system was compiled in "OpenRC"-Version, not with systemd. So I am confused about "systemd-logind"......................

NeddySeagoon · Posted: Sat Oct 02, 2021 2:45 pm Post subject:

klausyaesu,

Install wgetpaste.
Reboot to get to a known state.
Run startx.
Use wgetpaste to put the entire Xorg.0.log onto a pastebin.
Post the link, so we can see the entire file.

It will either be in /var/log on in /home/<username>/ somewhere, depending on how Xorg is compiled and run.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

Dear Sir,

thank you for the advice, will work in this way. You are always helpful. Thank you from Klaus in the far Germany (Klaus in german means from the origin "Nicolaus" or Santa Claus). Till later.

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

remember please, it is a nearly fresh system. "startx" command was given from root. I checked the home of the user, no log. So her is the link of pastebin for > /var/log/Xorg.0.log

https://dpaste.com/AHTAC6YMY

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

[ 1514.650]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 1514.656] Build Operating System: Linux 5.10.68-gentoo-dist x86_64 Gentoo
[ 1514.659] Current Operating System: Linux klaus 5.10.68-gentoo-dist #1 SMP Mon Sep 27 00:28:17 CEST 2021 x86_64
[ 1514.659] Kernel command line: auto BOOT_IMAGE=gentoo ro root=803
[ 1514.664] Build Date: 02 October 2021 09:41:00AM
[ 1514.666]
[ 1514.669] Current version of pixman: 0.40.0
[ 1514.674] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1514.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1514.684] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 2 16:10:31 2021
[ 1514.770] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1514.844] (==) No Layout section. Using the first Screen section.
[ 1514.844] (==) No screen section available. Using defaults.
[ 1514.844] (**) |-->Screen "Default Screen Section" (0)
[ 1514.844] (**) | |-->Monitor "<default monitor>"
[ 1514.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1514.855] (==) Automatically adding devices
[ 1514.855] (==) Automatically enabling devices
[ 1514.855] (==) Automatically adding GPU devices
[ 1514.855] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1514.899] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1514.899] Entry deleted from font path.
[ 1514.899] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1514.899] Entry deleted from font path.
[ 1514.899] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1514.899] Entry deleted from font path.
[ 1514.899] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1514.899] Entry deleted from font path.
[ 1514.899] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1514.904] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/75dpi/
[ 1514.904] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1514.904] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1514.904] (II) Loader magic: 0x55e511ca4d00
[ 1514.904] (II) Module ABI versions:
[ 1514.904] X.Org ANSI C Emulation: 0.4
[ 1514.905] X.Org Video Driver: 24.1
[ 1514.905] X.Org XInput driver : 24.1
[ 1514.905] X.Org Server Extension : 10.0
[ 1514.906] (++) using VT number 1

[ 1514.909] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 1514.911] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1514.912] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 1514.919] (--) PCI:*(0@0:2:0) 8086:2a42:1025:0212 rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8, BIOS @ 0x????????/131072
[ 1514.919] (--) PCI: (0@0:2:1) 8086:2a43:1025:0212 rev 7, Mem @ 0xd3400000/1048576
[ 1514.931] (II) LoadModule: "glx"
[ 1514.992] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1515.075] (II) Module glx: vendor="X.Org Foundation"
[ 1515.075] compiled for 1.20.13, module version = 1.0.0
[ 1515.075] ABI class: X.Org Server Extension, version 10.0
[ 1515.076] (==) Matched intel as autoconfigured driver 0
[ 1515.076] (==) Matched modesetting as autoconfigured driver 1
[ 1515.076] (==) Matched fbdev as autoconfigured driver 2
[ 1515.076] (==) Matched vesa as autoconfigured driver 3
[ 1515.076] (==) Assigned the driver to the xf86ConfigLayout
[ 1515.076] (II) LoadModule: "intel"
[ 1515.076] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 1515.119] (II) Module intel: vendor="X.Org Foundation"
[ 1515.119] compiled for 1.20.13, module version = 2.99.917
[ 1515.119] Module class: X.Org Video Driver
[ 1515.119] ABI class: X.Org Video Driver, version 24.1
[ 1515.119] (II) LoadModule: "modesetting"
[ 1515.120] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 1515.135] (II) Module modesetting: vendor="X.Org Foundation"
[ 1515.135] compiled for 1.20.13, module version = 1.20.13
[ 1515.135] Module class: X.Org Video Driver
[ 1515.135] ABI class: X.Org Video Driver, version 24.1
[ 1515.135] (II) LoadModule: "fbdev"
[ 1515.135] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 1515.145] (II) Module fbdev: vendor="X.Org Foundation"
[ 1515.145] compiled for 1.20.13, module version = 0.5.0
[ 1515.145] Module class: X.Org Video Driver
[ 1515.145] ABI class: X.Org Video Driver, version 24.1
[ 1515.145] (II) LoadModule: "vesa"
[ 1515.145] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 1515.154] (II) Module vesa: vendor="X.Org Foundation"
[ 1515.154] compiled for 1.20.13, module version = 2.5.0
[ 1515.154] Module class: X.Org Video Driver
[ 1515.154] ABI class: X.Org Video Driver, version 24.1
[ 1515.154] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1515.155] (II) intel: Driver for Intel(R) HD Graphics
[ 1515.155] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 1515.155] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 1515.155] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1515.155] (II) FBDEV: driver for framebuffer: fbdev
[ 1515.155] (II) VESA: driver for VESA chipsets: vesa
[ 1515.170] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200917
[ 1515.188] (WW) Falling back to old probe method for modesetting
[ 1515.188] (WW) Falling back to old probe method for fbdev
[ 1515.188] (II) Loading sub module "fbdevhw"
[ 1515.188] (II) LoadModule: "fbdevhw"
[ 1515.188] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 1515.202] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1515.202] compiled for 1.20.13, module version = 0.0.2
[ 1515.202] ABI class: X.Org Video Driver, version 24.1
[ 1515.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 1515.213] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[ 1515.213] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1515.214] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1515.214] (==) intel(0): RGB weight 888
[ 1515.214] (==) intel(0): Default visual is TrueColor
[ 1515.215] (II) intel(0): Output LVDS1 has no monitor section
[ 1515.215] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 1515.215] (II) intel(0): Enabled output LVDS1
[ 1515.215] (II) intel(0): Output VGA1 has no monitor section
[ 1515.216] (II) intel(0): Enabled output VGA1
[ 1515.216] (II) intel(0): Output DP1 has no monitor section
[ 1515.216] (II) intel(0): Enabled output DP1
[ 1515.216] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 1515.216] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 1515.216] (II) intel(0): Enabled output VIRTUAL1
[ 1515.216] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 1515.216] (==) intel(0): TearFree disabled
[ 1515.217] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1515.217] (==) intel(0): DPI set to (96, 96)
[ 1515.217] (II) Loading sub module "dri3"
[ 1515.217] (II) LoadModule: "dri3"
[ 1515.217] (II) Module "dri3" already built-in
[ 1515.217] (II) Loading sub module "dri2"
[ 1515.217] (II) LoadModule: "dri2"
[ 1515.217] (II) Module "dri2" already built-in
[ 1515.217] (II) Loading sub module "present"
[ 1515.217] (II) LoadModule: "present"
[ 1515.217] (II) Module "present" already built-in
[ 1515.217] (II) UnloadModule: "modesetting"
[ 1515.217] (II) Unloading modesetting
[ 1515.217] (II) UnloadModule: "fbdev"
[ 1515.217] (II) Unloading fbdev
[ 1515.217] (II) UnloadSubModule: "fbdevhw"
[ 1515.217] (II) Unloading fbdevhw
[ 1515.217] (II) UnloadModule: "vesa"
[ 1515.217] (II) Unloading vesa
[ 1515.248] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[ 1515.248] (==) intel(0): Backing store enabled
[ 1515.248] (==) intel(0): Silken mouse enabled
[ 1515.249] (II) intel(0): HW Cursor enabled
[ 1515.268] (==) intel(0): DPMS enabled
[ 1515.268] (==) intel(0): Display hotplug detection enabled
[ 1515.268] (II) intel(0): [DRI2] Setup complete
[ 1515.268] (II) intel(0): [DRI2] DRI driver: i965
[ 1515.268] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 1515.268] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 1515.268] (II) intel(0): hardware support for Present enabled
[ 1515.268] (II) Initializing extension Generic Event Extension
[ 1515.268] (II) Initializing extension SHAPE
[ 1515.268] (II) Initializing extension MIT-SHM
[ 1515.269] (II) Initializing extension XInputExtension
[ 1515.271] (II) Initializing extension XTEST
[ 1515.271] (II) Initializing extension BIG-REQUESTS
[ 1515.271] (II) Initializing extension SYNC
[ 1515.271] (II) Initializing extension XKEYBOARD
[ 1515.271] (II) Initializing extension XC-MISC
[ 1515.272] (II) Initializing extension XFIXES
[ 1515.272] (II) Initializing extension RENDER
[ 1515.272] (II) Initializing extension RANDR
[ 1515.272] (II) Initializing extension COMPOSITE
[ 1515.272] (II) Initializing extension DAMAGE
[ 1515.272] (II) Initializing extension MIT-SCREEN-SAVER
[ 1515.272] (II) Initializing extension DOUBLE-BUFFER
[ 1515.272] (II) Initializing extension RECORD
[ 1515.272] (II) Initializing extension DPMS
[ 1515.272] (II) Initializing extension Present
[ 1515.272] (II) Initializing extension DRI3
[ 1515.272] (II) Initializing extension X-Resource
[ 1515.272] (II) Initializing extension XVideo
[ 1515.272] (II) Initializing extension XVideo-MotionCompensation
[ 1515.272] (II) Initializing extension GLX
[ 1515.757] (II) AIGLX: Loaded and initialized i965
[ 1515.757] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1515.757] (II) Initializing extension XFree86-VidModeExtension
[ 1515.757] (II) Initializing extension XFree86-DGA
[ 1515.757] (II) Initializing extension XFree86-DRI
[ 1515.773] (II) Initializing extension DRI2
[ 1515.779] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1515.791] (II) intel(0): Setting screen physical size to 361 x 203
[ 1516.386] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1516.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1516.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1516.386] (II) LoadModule: "libinput"
[ 1516.386] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 1516.445] (II) Module libinput: vendor="X.Org Foundation"
[ 1516.445] compiled for 1.20.13, module version = 1.1.0
[ 1516.445] Module class: X.Org XInput Driver
[ 1516.445] ABI class: X.Org XInput driver, version 24.1
[ 1516.445] (II) Using input driver 'libinput' for 'Power Button'
[ 1516.447] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[ 1516.447] (**) Power Button: always reports core events
[ 1516.447] (**) Option "Device" "/dev/input/event3"
[ 1516.447] (**) Option "_source" "server/udev"
[ 1516.546] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 1516.547] (II) event3 - Power Button: device is a keyboard
[ 1516.547] (II) event3 - Power Button: device removed
[ 1516.547] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1516.547] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1516.548] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 1516.549] (II) event3 - Power Button: device is a keyboard
[ 1516.550] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 1516.550] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1516.550] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 1516.550] (II) Using input driver 'libinput' for 'Video Bus'
[ 1516.551] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 27 paused 0
[ 1516.551] (**) Video Bus: always reports core events
[ 1516.551] (**) Option "Device" "/dev/input/event9"
[ 1516.551] (**) Option "_source" "server/udev"
[ 1516.552] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 1516.552] (II) event9 - Video Bus: device is a keyboard
[ 1516.553] (II) event9 - Video Bus: device removed
[ 1516.553] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 1516.553] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1516.554] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 1516.555] (II) event9 - Video Bus: device is a keyboard
[ 1516.556] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 1516.556] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1516.556] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1516.556] (II) Using input driver 'libinput' for 'Power Button'
[ 1516.557] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[ 1516.557] (**) Power Button: always reports core events
[ 1516.557] (**) Option "Device" "/dev/input/event0"
[ 1516.557] (**) Option "_source" "server/udev"
[ 1516.559] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1516.559] (II) event0 - Power Button: device is a keyboard
[ 1516.559] (II) event0 - Power Button: device removed
[ 1516.559] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input0/event0"
[ 1516.559] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id

[ 1516.561] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 1516.561] (II) event0 - Power Button: device is a keyboard
[ 1516.563] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1516.563] (II) No input driver specified, ignoring this device.
[ 1516.563] (II) This device may have been added with another device file.
[ 1516.564] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1516.564] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1516.564] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 1516.564] (II) Using input driver 'libinput' for 'Sleep Button'
[ 1516.565] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
[ 1516.565] (**) Sleep Button: always reports core events
[ 1516.565] (**) Option "Device" "/dev/input/event2"
[ 1516.565] (**) Option "_source" "server/udev"
[ 1516.567] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 1516.567] (II) event2 - Sleep Button: device is a keyboard
[ 1516.567] (II) event2 - Sleep Button: device removed
[ 1516.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input2/event2"
[ 1516.567] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 1516.569] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 1516.569] (II) event2 - Sleep Button: device is a keyboard
[ 1516.571] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[ 1516.571] (II) No input driver specified, ignoring this device.
[ 1516.571] (II) This device may have been added with another device file.
[ 1516.572] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[ 1516.572] (II) No input driver specified, ignoring this device.
[ 1516.572] (II) This device may have been added with another device file.
[ 1516.573] (II) config/udev: Adding input device Video WebCam: Video WebCam (/dev/input/event10)
[ 1516.573] (**) Video WebCam: Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 1516.573] (**) Video WebCam: Video WebCam: Applying InputClass "libinput keyboard catchall"
[ 1516.573] (II) Using input driver 'libinput' for 'Video WebCam: Video WebCam'
[ 1516.574] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 30 paused 0
[ 1516.574] (**) Video WebCam: Video WebCam: always reports core events
[ 1516.574] (**) Option "Device" "/dev/input/event10"
[ 1516.574] (**) Option "_source" "server/udev"
[ 1516.578] (II) event10 - Video WebCam: Video WebCam: is tagged by udev as: Keyboard
[ 1516.578] (II) event10 - Video WebCam: Video WebCam: device is a keyboard
[ 1516.578] (II) event10 - Video WebCam: Video WebCam: device removed
[ 1516.578] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11/event10"
[ 1516.578] (II) XINPUT: Adding extended input device "Video WebCam: Video WebCam" (type: KEYBOARD, id 10)
[ 1516.582] (II) event10 - Video WebCam: Video WebCam: is tagged by udev as: Keyboard
[ 1516.582] (II) event10 - Video WebCam: Video WebCam: device is a keyboard
[ 1516.584] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 1516.584] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1516.584] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 1516.584] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 1516.586] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 31 paused 0
[ 1516.586] (**) AT Translated Set 2 keyboard: always reports core events
[ 1516.586] (**) Option "Device" "/dev/input/event4"
[ 1516.586] (**) Option "_source" "server/udev"
[ 1516.588] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 1516.589] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 1516.590] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 1516.590] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 1516.590] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 1516.593] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 1516.593] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 1516.597] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 1516.597] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1516.597] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 1516.597] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1516.597] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 1516.597] (II) LoadModule: "synaptics"
[ 1516.597] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 1516.610] (II) Module synaptics: vendor="X.Org Foundation"
[ 1516.610] compiled for 1.20.13, module version = 1.9.1
[ 1516.610] Module class: X.Org XInput Driver
[ 1516.610] ABI class: X.Org XInput driver, version 24.1
[ 1516.610] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1516.612] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[ 1516.612] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1516.612] (**) Option "Device" "/dev/input/event5"
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772 (res 69)
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086 (res 118)
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1516.612] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1516.612] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1516.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 1516.612] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 1516.612] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1516.613] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 1516.613] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 1516.613] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1516.613] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1516.613] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1516.613] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1516.613] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1516.615] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1516.615] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 1516.616] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 1516.616] (II) No input driver specified, ignoring this device.
[ 1516.616] (II) This device may have been added with another device file.
[ 1517.268] (II) intel(0): EDID vendor "CPT", prod id 5301
[ 1517.268] (II) intel(0): Printing DDC gathered Modelines:
[ 1517.268] (II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1425 1464 1560 768 773 783 806 -hsync -vsync (48.4 kHz eP)
[ 1528.295] (**) Option "fd" "24"
[ 1528.295] (II) event3 - Power Button: device removed
[ 1528.295] (**) Option "fd" "27"
[ 1528.295] (II) event9 - Video Bus: device removed
[ 1528.295] (**) Option "fd" "28"
[ 1528.295] (II) event0 - Power Button: device removed
[ 1528.295] (**) Option "fd" "29"
[ 1528.295] (II) event2 - Sleep Button: device removed
[ 1528.296] (**) Option "fd" "30"
[ 1528.296] (II) event10 - Video WebCam: Video WebCam: device removed
[ 1528.296] (**) Option "fd" "31"
[ 1528.296] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 1528.296] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1528.374] (II) systemd-logind: got pause for 13:69
[ 1528.374] (II) systemd-logind: got pause for 226:0
[ 1528.374] (II) systemd-logind: got pause for 13:64
[ 1528.374] (II) systemd-logind: got pause for 13:68
[ 1528.374] (II) systemd-logind: got pause for 13:74
[ 1528.374] (II) systemd-logind: got pause for 13:67
[ 1528.375] (II) systemd-logind: got pause for 13:66
[ 1528.375] (II) systemd-logind: got pause for 13:73

NeddySeagoon · Posted: Sat Oct 02, 2021 4:36 pm Post subject:

klausyaesu,

There are no errors there but the log looks truncated. The maximum post size is 64kB and I suspect that your log is bigger than that.
That's why I asked for a pastebin.

Do

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

wgetpaste is installed and gave me the output:
your pastebin can be seen here: https://dpaste.com/AHTAC6YMY

is it not the right one ?

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

wgetpaste /var/log/Xorg1.log

your paste can be seen here: http://dpaste.com/GY7SW5JUQ

NeddySeagoon · Posted: Sat Oct 02, 2021 4:54 pm Post subject:

klausyaesu,

That ends in the same place with

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

I entered startx in the hope that a GUI will start. Wrong?

after this command, the screen is changed and is black with a background-light, nothing to see, no command-line, no graphical GUI

So next I changed to tty2 and have to new login as root, than comes the commandline back.

That is all. I am searchin for the graphical Interface which I saw on the live-cd. Thank you

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

and "emerge gnome" was done yesterday

If I enter now: startx gnome

system replies:
"using system config directory /usr/share/X11/xorg.conf.d"

I checked and this is a directory with six conf.-files

what to do? 1 file is named: 10-evdev.conf

........................................................................................................................................................... ok, have a break now. Brain storming.

NeddySeagoon · Posted: Sat Oct 02, 2021 5:38 pm Post subject:

klausyaesu,

Without any configuration at all, by default, startx starts end exits because it finds nothing to do.
That's exactly what your startx is doing.

More exactly the default is to do

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

okay, Sir, with deep respect:

it is my first gentoo system and no one had me told like you NOW in the last message. I have to thank you very very much and you are helpful for to send me "in the correct direction" without more failure. So all fine and I will work on it and report the outcome tomorrow.

Again thank you. Great to be here. Greetings!

klausyaesu · n00b Joined: 29 Sep 2021 Posts: 52

Result: the warnings about different versions in the loaded modules are equal and NOT errors, only information.

And now I am able to handle the "wgetpaste"-Command.

Finally twm does work and all is fine. Case closed.

Big Thank you from Klaus

..............................................................................................................................................................................................

S O L V E D