| View previous topic :: View next topic |
| Author |
Message |
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2961
Location: Edge of marsh USA
|
 Posted: Thu Sep 16, 2021 4:17 pm Post subject: What's going on this older hard drive? [ANSWERED] |
 |
|
Drive is an WDC WD5000AAKS-00UU3A0, 8.83 years running time (almost never off).
This was two days ago. It's been fine since. Passes self-tests, no SMART errors. Fully backed up nightly.
Next time I shut it off, I will re-seat the cables.
| Code: | [56749.868641] ata1.00: exception Emask 0x50 SAct 0x3e000000 SErr 0x400800 action 0x6 frozen
[56749.868643] ata1.00: irq_stat 0x08000000, interface fatal error
[56749.868646] ata1: SError: { HostInt Handshk }
[56749.868649] ata1.00: failed command: WRITE FPDMA QUEUED
[56749.868654] ata1.00: cmd 61/00:c8:00:c8:36/08:00:0e:00:00/40 tag 25 ncq dma 1048576 ou
res 40/00:ec:00:e8:36/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56749.868655] ata1.00: status: { DRDY }
[56749.868656] ata1.00: failed command: WRITE FPDMA QUEUED
[56749.868660] ata1.00: cmd 61/00:d0:00:d0:36/08:00:0e:00:00/40 tag 26 ncq dma 1048576 ou
res 40/00:ec:00:e8:36/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56749.868661] ata1.00: status: { DRDY }
[56749.868662] ata1.00: failed command: WRITE FPDMA QUEUED
[56749.868665] ata1.00: cmd 61/00:d8:00:d8:36/08:00:0e:00:00/40 tag 27 ncq dma 1048576 ou
res 40/00:ec:00:e8:36/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56749.868666] ata1.00: status: { DRDY }
[56749.868667] ata1.00: failed command: WRITE FPDMA QUEUED
[56749.868673] ata1.00: cmd 61/00:e0:00:e0:36/08:00:0e:00:00/40 tag 28 ncq dma 1048576 ou
res 40/00:ec:00:e8:36/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56749.868674] ata1.00: status: { DRDY }
[56749.868675] ata1.00: failed command: WRITE FPDMA QUEUED
[56749.868678] ata1.00: cmd 61/e8:e8:00:e8:36/09:00:0e:00:00/40 tag 29 ncq dma 1298432 ou
res 40/00:ec:00:e8:36/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56749.868679] ata1.00: status: { DRDY }
[56749.868682] ata1: hard resetting link
[56750.176920] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[56750.179177] ata1.00: configured for UDMA/133
[56750.179214] ata1: EH complete
[56751.142689] ata1.00: exception Emask 0x50 SAct 0x1c0 SErr 0x400800 action 0x6 frozen
[56751.142693] ata1.00: irq_stat 0x08000000, interface fatal error
[56751.142697] ata1: SError: { HostInt Handshk }
[56751.142701] ata1.00: failed command: WRITE FPDMA QUEUED
[56751.142710] ata1.00: cmd 61/00:30:00:b8:ac/08:00:0e:00:00/40 tag 6 ncq dma 1048576 ou
res 40/00:44:00:c8:ac/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56751.142712] ata1.00: status: { DRDY }
[56751.142715] ata1.00: failed command: WRITE FPDMA QUEUED
[56751.142722] ata1.00: cmd 61/00:38:00:c0:ac/08:00:0e:00:00/40 tag 7 ncq dma 1048576 ou
res 40/00:44:00:c8:ac/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56751.142724] ata1.00: status: { DRDY }
[56751.142726] ata1.00: failed command: WRITE FPDMA QUEUED
[56751.142733] ata1.00: cmd 61/90:40:00:c8:ac/06:00:0e:00:00/40 tag 8 ncq dma 860160 out
res 40/00:44:00:c8:ac/00:00:0e:00:00/40 Emask 0x50 (ATA bus error)
[56751.142739] ata1.00: status: { DRDY }
[56751.142744] ata1: hard resetting link
[56751.449013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[56751.451231] ata1.00: configured for UDMA/133
[56751.451259] ata1: EH complete |
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi
Last edited by figueroa on Sat Sep 18, 2021 1:47 am; edited 2 times in total |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54216
Location: 56N 3W
|
| Posted: Thu Sep 16, 2021 9:30 pm Post subject: |
|
|
figueroa,
That says its a communication problem.
It could be on the motherboard, on the drive, or a failed SATA data cable.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
figueroa
Advocate
Joined: 14 Aug 2005
Posts: 2961
Location: Edge of marsh USA
|
| Posted: Fri Sep 17, 2021 1:57 am Post subject: |
|
|
Thanks for the reply. A couple of hours ago, I shut it down, reseated the cables on both drives, started it up again. So far so good. If it recurs, I'll switch SATA cables and keep watching.
_________________
Andy Figueroa
hp pavilion hpe h8-1260t/2AB5; spinning rust x3
i7-2600 @ 3.40GHz; 16 gb; Radeon HD 7570
amd64/23.0/split-usr/desktop (stable), OpenRC, -systemd -pulseaudio -uefi |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Other Things Gentoo
