Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
G4 12" display turns off after ~1min
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
Daytona
n00b
n00b


Joined: 01 Aug 2005
Posts: 55
Location: EN51vt

PostPosted: Sun Sep 12, 2021 10:35 pm    Post subject: G4 12" display turns off after ~1min Reply with quote

Hi all,

About a year ago, I finally got around to putting Gentoo on this G4 12" (Powerbook6,2) I've had for a while. After some battles mostly related to cross-compiling, it was a success.

Then it went on the shelf.

Now I want to use it, but am encountering a problem- the display turns itself off after around a minute, and does not come back on. It's still running as I can connect to it over SSH, but the display is totally dark.

The machine boots to console. X is not even installed.

This wasn't happening before as I did boot it on its' own, do an 'emerge --sync', and some other things when I last used it- all locally on the 'Book.

I've looked through the kernel config for something I missed, removed OF Framebuffer option per one post I found, and looking in dmesg nvidiafb appears to be working:
Code:

g4 ~ # dmesg|grep nvidiafb
[    0.543806] nvidiafb: Device ID: 10de0329
[    0.564739] nvidiafb: CRTC0 analog not found
[    0.588734] nvidiafb: CRTC1 analog not found
[    1.140763] nvidiafb: Found OF EDID for head 1
[    1.140778] nvidiafb: EDID found from BUS1
[    1.692764] nvidiafb: CRTC 1 is currently programmed for DFP
[    1.692777] nvidiafb: Using DFP on CRTC 1
[    1.692788] nvidiafb: Panel size is 1024 x 768
[    1.692797] nvidiafb: Panel is TMDS
[    1.694505] nvidiafb: Flat panel dithering enabled
[    1.700369] nvidiafb: PCI nVidia NV32 framebuffer (32MB @ 0xA0000000)


I also added 'video=nvidiafb:1024x768-32@60' to the kernel command line to no avail.

I found the Working 5.4.x kernel-config for PowerMac/PowerBook G4 thread and applied that config to 5.4.48 (the closest 5.4 I have available), but still the same.

Even the original 4.19.57 kernel exhibits the problem. So, I'm at a loss. Anybody have any ideas?
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Mon Sep 13, 2021 2:11 am    Post subject: Reply with quote

Typical for CCFL backlights when they age. In other words, hardware issue.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Daytona
n00b
n00b


Joined: 01 Aug 2005
Posts: 55
Location: EN51vt

PostPosted: Wed Sep 15, 2021 12:05 am    Post subject: Reply with quote

That did occur to me, but I discounted it because
(a) while I haven't sat with a stopwatch and timed it, it does seem to be incredibly consistent- like 1 minute exactly. If I'm quick, I can log in and maybe run 1 command before it shuts off.
(b) If I shutdown -r now, the backlight comes back on

However, I just tried another test by booting into OpenFirmware and letting it sit, and sure enough the backlight shut off in the same amount of time. :(

I typed in mac-boot and by shining a flashlight down the screen I could see it booting.

So yes, unfortunately appears to be a hardware issue.

Any thoughts on whether it's the inverter board or the CCFL tube itself? If I can pick up one or the other cheap enough, might go for it.
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana

PostPosted: Wed Sep 15, 2021 12:32 am    Post subject: Reply with quote

Lights, I think. Blown inverter won't come on at all. You may consider LED conversion. Takes less power and lasts forever.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum