View previous topic :: View next topic |
Author |
Message |
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 7:58 am Post subject: KDE-plasma installation problem: `sys-devel/llvm-11.1.0` |
|
|
Greetings, I am new to Gentoo and just finish a Gentoo basic installation from another Linux host by `chroot`, my stage3 is of `systemd` version and eselect the profile as `default/linux/amd64/17.1/systemd (stable)` when I configured the system. I ebuild a Linux 5.4.109 kernel to avoid Nvidia conflict against kernel and `make menuconfig` without `nouveau` nvidia driver since by which I experienced a failure when my system had been compiling it. This Issue appeared during I run the command line Code: | emerge --ask kde-plasma/plasma-meta | from https://wiki.gentoo.org/wiki/KDE/pl, which had been failed at `sys-devel/lvm-11.10` compiling.
The output of `emerge --info`:
saito / # emerge --info '=sys-devel/llvm-11.1.0::gentoo'
Portage 3.0.18 (python 3.9.4-final-0, default/linux/amd64/17.1/desktop/plasma/systemd, gcc-10.3.0, glibc-2.33, 5.4.0-74-generic x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-5.4.0-74-generic-x86_64-Intel-R-_Core-TM-_i9-9900K_CPU_@_3.60GHz-with-glibc2.33
KiB Mem: 65769200 total, 43385664 free
KiB Swap: 2097148 total, 2097148 free
Timestamp of repository gentoo: Thu, 10 Jun 2021 00:45:01 +0000
Head commit of repository gentoo: d94898411a2c2661bd3fffb5c84dd72e3546f97b
sh bash 5.1_p8
ld GNU ld (Gentoo 2.35.2 p1) 2.35.2
app-shells/bash: 5.1_p8::gentoo
dev-lang/perl: 5.32.1::gentoo
dev-lang/python: 3.9.4_p1::gentoo
dev-util/cmake: 3.18.5::gentoo
sys-apps/baselayout: 2.7::gentoo
sys-apps/sandbox: 2.24::gentoo
sys-devel/autoconf: 2.13-r1::gentoo, 2.69-r5::gentoo
sys-devel/automake: 1.16.3-r1::gentoo
sys-devel/binutils: 2.35.2::gentoo
sys-devel/gcc: 10.3.0::gentoo
sys-devel/gcc-config: 2.4::gentoo
sys-devel/libtool: 2.4.6-r6::gentoo
sys-devel/make: 4.3::gentoo
sys-kernel/linux-headers: 5.10::gentoo (virtual/os-headers)
sys-libs/glibc: 2.33::gentoo
Repositories:
gentoo
location: /var/db/repos/gentoo
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-extra-opts:
sync-rsync-verify-jobs: 1
sync-rsync-verify-max-age: 24
sync-rsync-verify-metamanifest: yes
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="@FREE"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe"
DISTDIR="/var/cache/distfiles"
ENV_UNSET="CARGO_HOME DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned qa-unresolved-soname-deps sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/var/cache/binpkgs"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl acpi activities alsa amd64 berkdb bluetooth branding bzip2 cairo cdda cdr cli crypt cups dbus declarative dri driver dts dvd dvdr emboss encode exif flac fortran gdbm gif gpm gtk gui iconv icu ipv6 jpeg kde kipi kwallet lcms libglvnd libnotify libtirpc mad mng mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf phonon plasma png policykit ppds qml qt5 readline sdl seccomp semantic-desktop spell split-usr ssl startup-notification svg systemd tcpd tiff truetype udev udisks unicode upower usb vorbis widgets wxwidgets x264 xattr xcb xml xv xvid zlib" ABI_X86="64" ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LUA_SINGLE_TARGET="lua5-1" LUA_TARGETS="lua5-1" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-3 php7-4" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_9" PYTHON_TARGETS="python3_9" RUBY_TARGETS="ruby26" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq proto steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, RUSTFLAGS
The Error Report after compile stop:
Code: | >>> Failed to emerge sys-devel/llvm-11.1.0, Log file:
>>> '/var/tmp/portage/sys-devel/llvm-11.1.0/temp/build.log'
* Messages for package sys-devel/llvm-11.1.0:
* ERROR: sys-devel/llvm-11.1.0::gentoo failed (compile phase):
* ninja -v -j16 -l0 distribution failed
*
* Call stack:
* ebuild.sh, line 125: Called src_compile
* environment, line 3861: Called multilib-minimal_src_compile
* environment, line 2631: Called multilib_foreach_abi 'multilib-minimal_abi_src_compile'
* environment, line 2901: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
* environment, line 2566: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
* environment, line 2564: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_compile'
* environment, line 587: Called multilib-minimal_abi_src_compile
* environment, line 2625: Called multilib_src_compile
* environment, line 3113: Called cmake_build 'distribution'
* environment, line 1328: Called eninja 'distribution'
* environment, line 1780: Called die
* The specific snippet of code:
* "$@" || die "${nonfatal_args[@]}" "${*} failed"
*
* If you need support, post the output of `emerge --info '=sys-devel/llvm-11.1.0::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-devel/llvm-11.1.0::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-devel/llvm-11.1.0/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-devel/llvm-11.1.0/temp/environment'.
* Working directory: '/var/tmp/portage/sys-devel/llvm-11.1.0/work/llvm-11.1.0_build-abi_x86_64.amd64'
* S: '/var/tmp/portage/sys-devel/llvm-11.1.0/work/llvm' |
Where the kernel version is of my chroot host Linux. I am prefer to ebuild a lower version of sys-devel/llvm for instance the version 10.x.y to fix this but I am not sure if it will break the entire dependencies, so I ask the professional suggestions here the Honored Gentoo Community.
Here is the content of my build.log, /var/tmp/portage/sys-devel/llvm-11.1.0/temp/build.log:
http://sprunge.us/lBgiz6
Here is the rust build log:
http://sprunge.us/RyWiaD
Here is the x11-driver/nvidia build log:
http://sprunge.us/th179G
Please check and fix this, Thanks a lot!
Last edited by saito on Sat Jun 12, 2021 2:10 pm; edited 2 times in total |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30838 Location: here
|
Posted: Sat Jun 12, 2021 8:53 am Post subject: |
|
|
Welcome to gentoo forums.
You should post /var/tmp/portage/sys-devel/llvm-11.1.0/temp/build.log with wgetpaste or transfer.sh _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 9:27 am Post subject: |
|
|
fedeliallalinea wrote: | Welcome to gentoo forums.
You should post /var/tmp/portage/sys-devel/llvm-11.1.0/temp/build.log with wgetpaste or transfer.sh |
Thank you, here is the output of wgetpaste http://sprunge.us/lBgiz6. I switched several paste sites, this log file is too large to paste on them. |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30838 Location: here
|
Posted: Sat Jun 12, 2021 10:01 am Post subject: |
|
|
Code: | lib/Target/AMDGPU/AMDGPUGenInstrInfo.inc:7463:5: internal compiler error: Segmentation fault |
Segmentation fault usually are caused by hardware issue. _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 10:04 am Post subject: |
|
|
fedeliallalinea wrote: | Code: | lib/Target/AMDGPU/AMDGPUGenInstrInfo.inc:7463:5: internal compiler error: Segmentation fault |
Segmentation fault usually are caused by hardware issue. |
Thanks, but I have no AMDGPU at all, is there possible to change the make.conf to fix it? |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30838 Location: here
|
Posted: Sat Jun 12, 2021 10:16 am Post subject: |
|
|
Ah, so first thing you should change is variable VIDEO_CARDS because you don't seem to have set it up correctly (you have "amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l"), see wiki page.
You can also disable llvm_targets_amdgpu use flag from llvm package.
--edit--
Set "-march=native -O2 -pipe" as CFLAGS in your make.conf _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 10:26 am Post subject: |
|
|
fedeliallalinea wrote: | Ah, so first thing you should change is variable VIDEO_CARDS because you don't seem to have set it up correctly (you have "amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l"), see wiki page.
You can also disable llvm_targets_amdgpu use flag from llvm package.
--edit--
Set "-march=native -O2 -pipe" as CFLAGS in your make.conf |
Great! I am trying, thanks a lot. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 12:57 pm Post subject: |
|
|
fedeliallalinea wrote: | Ah, so first thing you should change is variable VIDEO_CARDS because you don't seem to have set it up correctly (you have "amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l"), see wiki page.
You can also disable llvm_targets_amdgpu use flag from llvm package.
--edit--
Set "-march=native -O2 -pipe" as CFLAGS in your make.conf |
By passing the VIDEO_CARDS="nvidia intel" in make.conf, the compile of llvm finished, but the following compiling of dev-lang/rust-1.51.0-r2 failed with the build.log here: http://sprunge.us/RyWiaD. I have built one independently while wondering whether it breaks the dependencies of KDE/plasma. |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30838 Location: here
|
Posted: Sat Jun 12, 2021 1:00 pm Post subject: |
|
|
Again internal compiler error: Segmentation fault, try to check your hardware (RAM, cpu temp,..) and look in dmesg. _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 1:33 pm Post subject: |
|
|
fedeliallalinea wrote: | Again internal compiler error: Segmentation fault, try to check your hardware (RAM, cpu temp,..) and look in dmesg. |
Thanks again, I have checked the dmesg : http://sprunge.us/BxvmcV, while the time it happened did not match. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sat Jun 12, 2021 8:46 pm Post subject: All Compiled Finished |
|
|
fedeliallalinea wrote: | Again internal compiler error: Segmentation fault, try to check your hardware (RAM, cpu temp,..) and look in dmesg. |
Very greetings for thy patient and nice reply, I just finished my installation as A KDE/plasma DE after experienced other some bugs and some kernel errors. But your nice patient suggestion supported me in this long day, thank you again! |
|
Back to top |
|
|
Hu Moderator
Joined: 06 Mar 2007 Posts: 21496
|
Posted: Sat Jun 12, 2021 9:17 pm Post subject: |
|
|
http://sprunge.us/BxvmcV: | [ 6059.754088] mce: CPU11: Core temperature above threshold, cpu clock throttled (total events = 1) | This should never happen in a properly maintained system. CPU overheating can lead to a variety of illogical results, including miscompiling a program to the point that the program malfunctions later, after the CPU has returned to normal operating temperature. What internal temperature does your system have, both at steady state and during heavy compilation? |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sun Jun 13, 2021 2:51 pm Post subject: |
|
|
Hu wrote: | http://sprunge.us/BxvmcV: | [ 6059.754088] mce: CPU11: Core temperature above threshold, cpu clock throttled (total events = 1) | This should never happen in a properly maintained system. CPU overheating can lead to a variety of illogical results, including miscompiling a program to the point that the program malfunctions later, after the CPU has returned to normal operating temperature. What internal temperature does your system have, both at steady state and during heavy compilation? |
Greetings, here is the normal temperature 'http://dpaste.com/5UR8EVLU4. The last time point(in the dmesg I post) above threshold is three hour before I post rust compiling failure, but I don't think the temperature was much less than less than the threshold while I compiled those packages in sys-devel/* by hearing the Decibel of My CPU Fan which is a 360 cooler. The most damaged compilation was compiling the nouveau had not been post by, since there was only a picture taken by a phone while the computer stopped totally and leaving without any dmesg and other analogies. I experienced this type of stopping at first when I run BOINC in my docker while it was operating a task cuda-GPU required. I post it to them, you know ...... |
|
Back to top |
|
|
Hu Moderator
Joined: 06 Mar 2007 Posts: 21496
|
Posted: Sun Jun 13, 2021 4:12 pm Post subject: |
|
|
Your idle temperatures look fine. The sensors report that 86C is high, and personally I'd like to stay at least 5C below "high" just for extra safety. How well can this system cool itself under heavy load? Fast fans are only useful if the fan can efficiently replace the hot air with room temperature air. If the air vents are too small, or are obstructed by dust, the fan may offer little relief even at its highest speed. |
|
Back to top |
|
|
saito Apprentice
Joined: 12 Jun 2021 Posts: 187
|
Posted: Sun Jun 13, 2021 5:29 pm Post subject: |
|
|
Hu wrote: | Your idle temperatures look fine. The sensors report that 86C is high, and personally I'd like to stay at least 5C below "high" just for extra safety. How well can this system cool itself under heavy load? Fast fans are only useful if the fan can efficiently replace the hot air with room temperature air. If the air vents are too small, or are obstructed by dust, the fan may offer little relief even at its highest speed. |
Thanks, There are other three Fans installed on my full tower metal case, those which send air out of the case in charge of a Asus motherboard, and then I can test the temp. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|