View previous topic :: View next topic |
Author |
Message |
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Tue Jun 04, 2019 12:07 pm Post subject: |
|
|
Jaglover,
then the codec drivers don't auto load, unless that's changed recently. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Tue Jun 04, 2019 12:15 pm Post subject: |
|
|
Config file: https://pastebin.com/KrUGDv5T
And is it normal i have only that when i perfom module rebuild ? No module with linux-firmware ?
Code: | zohran@msi-gs73vr-6rf /boot $ emerge --pretend @module-rebuild
These are the packages that would be merged, in order:
Calculating dependencies ... done!
[ebuild R ] x11-drivers/nvidia-drivers-430.14
[ebuild R ] sys-power/bbswitch-0.8-r2 |
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Tue Jun 04, 2019 12:41 pm Post subject: |
|
|
Fulgurance,
That should give you two sound cards if you are actually using that kernel.
Code: | CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048 |
I suspect that kernel is not actually in use.
Look at the date and time in thats the build date and time of the running kernel.
Have you made a newer one?
CONFIG_SND_HDA_INTEL=y is used by both your soundcards.
CONFIG_SND_HDA_CODEC_REALTEK=y is for your motherboard sound.
CONFIG_SND_HDA_CODEC_HDMI=y is for your video card digital sound output.
What do you have in /proc/asound/devices?
I get Code: | $ cat /proc/asound/devices
2: [ 1- 3]: digital audio playback
3: [ 1- 7]: digital audio playback
4: [ 1- 8]: digital audio playback
5: [ 1- 9]: digital audio playback
6: [ 1-10]: digital audio playback
7: [ 1- 0]: hardware dependent
8: [ 1] : control
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0- 3]: digital audio playback
12: [ 0- 0]: hardware dependent
13: [ 0] : control
33: : timer |
The is the minor device number. It will appear in
is the sound card number and device on the card. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Tue Jun 04, 2019 3:49 pm Post subject: |
|
|
Code: | zohran@msi-gs73vr-6rf ~ $ sudo eselect kernel list
Mot de passe :
Available kernel symlink targets:
[1] linux-5.1.6-gentoo *
zohran@msi-gs73vr-6rf ~ $ sudo eselect kernel set 1
zohran@msi-gs73vr-6rf ~ $ uname -a
Linux msi-gs73vr-6rf 5.1.6-gentoo #4 SMP Tue Jun 4 14:12:21 CEST 2019 x86_64 Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz GenuineIntel GNU/Linux
zohran@msi-gs73vr-6rf ~ $ cd /usr/src/linux
zohran@msi-gs73vr-6rf /usr/src/linux $ sudo make -j9 menuconfig
scripts/kconfig/mconf Kconfig
*** End of the configuration.
*** Execute 'make' to start the build or try 'make help'.
zohran@msi-gs73vr-6rf /usr/src/linux $ cat /proc/asound/devices
1: : sequencer
2: [ 0- 0]: digital audio playback
3: [ 0- 0]: digital audio capture
4: [ 0- 1]: digital audio playback
5: [ 0- 3]: digital audio playback
6: [ 0- 7]: digital audio playback
7: [ 0- 8]: digital audio playback
8: [ 0- 9]: digital audio playback
9: [ 0-10]: digital audio playback
10: [ 0- 0]: hardware dependent
11: [ 0- 2]: hardware dependent
12: [ 0] : control
33: : timer
zohran@msi-gs73vr-6rf /usr/src/linux $ ls -l /dev/snd
total 0
drwxr-xr-x. 2 root root 60 4 juin 14:33 by-path
crw-rw----+ 1 root audio 116, 12 4 juin 14:33 controlC0
crw-rw----+ 1 root audio 116, 10 4 juin 14:33 hwC0D0
crw-rw----+ 1 root audio 116, 11 4 juin 14:33 hwC0D2
crw-rw----+ 1 root audio 116, 3 4 juin 14:33 pcmC0D0c
crw-rw----+ 1 root audio 116, 2 4 juin 14:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 9 4 juin 14:33 pcmC0D10p
crw-rw----+ 1 root audio 116, 4 4 juin 14:33 pcmC0D1p
crw-rw----+ 1 root audio 116, 5 4 juin 14:33 pcmC0D3p
crw-rw----+ 1 root audio 116, 6 4 juin 14:33 pcmC0D7p
crw-rw----+ 1 root audio 116, 7 4 juin 14:33 pcmC0D8p
crw-rw----+ 1 root audio 116, 8 4 juin 14:33 pcmC0D9p
crw-rw----+ 1 root audio 116, 1 4 juin 14:33 seq
crw-rw----+ 1 root audio 116, 33 4 juin 14:33 timer |
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Tue Jun 04, 2019 4:04 pm Post subject: |
|
|
Fulgurance,
/proc/asound/devices stows your on board sound card. That it has a digital audio capture tells that.
Your HDMI sound, that normally goes with the nVidia card is not listed.
At least it self consistent.
There are lots of ways to wire the codec to the outside world connectors. The auto detect sometimes gets it wrong.
That's what the various model= parameters allempt to compensate for.
Your kernel looks good, as do the two files you posted. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Tue Jun 04, 2019 4:12 pm Post subject: |
|
|
Okay. What i supposed to do ? Test all modeles with modprobe ? |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Tue Jun 04, 2019 4:21 pm Post subject: |
|
|
Fulgurance,
Yes but ...
You have Code: | CONFIG_SND_HDA_INTEL=y | so its not a removable module.
First you need to rebuild you kernel with CONFIG_SND_HDA_INTEL as a module.
You can pass parameters to build in kernel modules on the kernel command line but that means a reboot to change.
I don't promise that modular will work either as some modules won't unload. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Anon-E-moose Watchman
Joined: 23 May 2008 Posts: 6095 Location: Dallas area
|
Posted: Tue Jun 04, 2019 5:18 pm Post subject: |
|
|
I always set up my sound devices as modules (if it allows it) from sound card support on down.
I've had a problem with built-in before where things don't get recognized at the appropriate time when booting, which kind of sounds like whats going on here. _________________ PRIME x570-pro, 3700x, 6.1 zen kernel
gcc 13, profile 17.0 (custom bare multilib), openrc, wayland |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Sat Jun 08, 2019 7:44 am Post subject: |
|
|
Not solved. I have tested all device type, but nothing.
BUT, when i have used alsamixer again, i have noted something.
When i enable Loopback and unmute Mic Boost and Mic, my pc do sound: i havent sound to any application, but i have sound similar to radio when radio don't capture any radio channel. Bad configuration ?
Code: | ┌──────────────────────────────────────────────────────── AlsaMixer v1.1.9 ─────────────────────────────────────────────────────────┐
│ Carte: HDA Intel PCH F1: Aide │
│ Puce: Realtek ALC898 F2: Informations Système │
│ Vue: F3:[Lecture] F4: Capture F5: Tout F6: Choisir la carte son │
│ Contrôle: Mic Boost [gain dB: 10,00, 10,00] Esc: Quitter │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
← │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ ├──┤ ├──┤ └──┘ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ Enabled │
│ │OO│ │OO│ │OO│ │OO│ │OO│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │MM│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 100<>100 100 100 100<>100 100<>100 22<>22 │
│ Surround Center LFE Side Mic <Mic Boos> S/PDIF S/PDIF D S/PDIF 1 S/PDIF 2 S/PDIF 3 S/PDIF 4 S/PDIF 1 Loopback │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ |
|
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Sat Jun 08, 2019 2:21 pm Post subject: |
|
|
Total dmesg output:
Code: | ALSA device list:
[ 1.489825] No soundcards found.
[ 1.489857] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.489858] cfg80211: failed to load regulatory.db
[ 1.501169] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=4 (0x1b/0x17/0x15/0x1a/0x0) type:speaker
[ 1.501170] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.501171] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.501172] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 1.501173] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 1.501173] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 1.501174] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 1.501175] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 1.503704] random: fast init done
[ 1.514486] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 1.514519] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 1.514547] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 1.514573] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 1.514607] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 1.514632] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 |
|
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Wed Jun 12, 2019 7:24 pm Post subject: |
|
|
I think i have found source of problem, but how i solve it ?
dmesg output
Code: | [ 2.128176] udevd[2160]: ctx=0x5575d7746e10 path=/lib/modules/5.1.8-gentoo/video/nvidia-modeset.ko error=No such file or directory
[ 2.130791] udevd[2238]: ctx=0x5575d7746e10 path=/lib/modules/5.1.8-gentoo/kernel/drivers/net/mdio.ko error=No such file or directory
[ 2.130879] udevd[2160]: ctx=0x5575d7746e10 path=/lib/modules/5.1.8-gentoo/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko error=No such file or directory
[ 2.131321] udevd[2218]: ctx=0x5575d7746e10 path=/lib/modules/5.1.8-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko error=No such file or directory
[ 2.131367] udevd[2218]: ctx=0x5575d7746e10 path=/lib/modules/5.1.8-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko error=No such file or directory |
Very strange:
Code: | fulgurance@msi-gs73vr-6rf ~ $ locate snd-hda-codec.ko
/lib/modules/5.1.8-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko
/usr/src/linux-5.1.8-gentoo/sound/pci/hda/.snd-hda-codec.ko.cmd
/usr/src/linux-5.1.8-gentoo/sound/pci/hda/snd-hda-codec.ko
|
|
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Fri Jun 14, 2019 1:58 pm Post subject: |
|
|
I have finally have success alsa start at boot, with select all sound option with modules.
But when i load plasma, again, i have no sound....
Code: | [ 2.090450] udevd[2143]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/video/nvidia-modeset.ko error=No such file or directory
[ 2.093862] udevd[2201]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/kernel/drivers/net/mdio.ko error=No such file or directory
[ 2.093967] udevd[2707]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko error=No such file or directory
[ 2.094523] udevd[2134]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko error=No such file or directory
[ 2.094556] udevd[2134]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko error=No such file or directory
[ 2.124354] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.251250] usb 1-3: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 2.251253] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.251261] usb 1-3: Product: USB2.0-CRW
[ 2.251262] usb 1-3: Manufacturer: Generic
[ 2.251264] usb 1-3: SerialNumber: 20100201396000000
[ 2.367499] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 2.497292] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00, bcdDevice= 1.10
[ 2.497296] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[ 2.497299] usb 1-7: Product: MSI EPF USB
[ 2.497301] usb 1-7: Manufacturer: MSI EPF USB
[ 2.497303] usb 1-7: SerialNumber: MSI EPF USB
[ 2.501109] hid-generic 0003:1770:FF00.0003: hiddev97,hidraw2: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[ 2.615518] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ 2.743326] usb 1-10: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 2.743330] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.860497] usb 1-11: new high-speed USB device number 6 using xhci_hcd
[ 3.021246] usb 1-11: New USB device found, idVendor=5986, idProduct=0547, bcdDevice=29.08
[ 3.021251] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.021254] usb 1-11: Product: NEC HD WebCam
[ 3.021271] usb 1-11: Manufacturer: Generic
[ 3.021273] usb 1-11: SerialNumber: 200901010001
[ 3.046880] udevd[2738]: ctx=0x55ef80692e10 path=/lib/modules/5.1.9-gentoo/video/nvidia-modeset.ko error=No such file or directory
[ 3.308457] urandom_read: 2 callbacks suppressed
[ 3.308458] random: lvm: uninitialized urandom read (4 bytes read)
[ 8.000769] random: crng init done
[ 16.075626] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 16.159067] SELinux: policy capability network_peer_controls=1
[ 16.159069] SELinux: policy capability open_perms=1
[ 16.159070] SELinux: policy capability extended_socket_class=1
[ 16.159071] SELinux: policy capability always_check_network=0
[ 16.159071] SELinux: policy capability cgroup_seclabel=1
[ 16.159072] SELinux: policy capability nnp_nosuid_transition=1
[ 16.178010] audit: type=1403 audit(1560519860.931:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 16.180181] audit: type=1400 audit(1560519860.933:3): avc: denied { search } for pid=1 comm="init" name="/" dev="tmpfs" ino=14450 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir permissive=1
[ 16.180339] audit: type=1400 audit(1560519860.933:4): avc: denied { write } for pid=1 comm="init" name="/" dev="tmpfs" ino=14450 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir permissive=1
[ 16.180341] audit: type=1400 audit(1560519860.933:5): avc: denied { add_name } for pid=1 comm="init" name="utmp" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir permissive=1
[ 16.180344] audit: type=1400 audit(1560519860.933:6): avc: denied { create } for pid=1 comm="init" name="utmp" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=file permissive=1
[ 16.180683] audit: type=1400 audit(1560519860.933:7): avc: denied { write open } for pid=1 comm="init" path="/run/utmp" dev="tmpfs" ino=16503 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=file permissive=1
[ 16.181956] audit: type=1400 audit(1560519860.935:8): avc: denied { create } for pid=1 comm="init" name="initctl" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=fifo_file permissive=1
[ 16.182088] audit: type=1400 audit(1560519860.935:9): avc: denied { read write } for pid=1 comm="init" name="initctl" dev="tmpfs" ino=16504 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=fifo_file permissive=1
[ 16.182090] audit: type=1400 audit(1560519860.935:10): avc: denied { open } for pid=1 comm="init" path="/run/initctl" dev="tmpfs" ino=16504 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=fifo_file permissive=1
[ 16.182091] audit: type=1400 audit(1560519860.935:11): avc: denied { getattr } for pid=1 comm="init" path="/run/initctl" dev="tmpfs" ino=16504 scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=fifo_file permissive=1
[ 16.241815] init-early.sh (3981) used greatest stack depth: 13120 bytes left
[ 16.977916] udevd[4401]: starting version 3.2.8
[ 16.989189] udevd[4401]: starting eudev-3.2.8
[ 17.267897] alx 0000:3d:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:80:14:e2]
[ 17.280659] ath10k_pci 0000:3e:00.0: enabling device (0000 -> 0002)
[ 17.281238] ath10k_pci 0000:3e:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 17.285426] nvidia: loading out-of-tree module taints kernel.
[ 17.285432] nvidia: module license 'NVIDIA' taints kernel.
[ 17.285433] Disabling lock debugging due to kernel taint
[ 17.285660] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 17.285959] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa4c8f580)
[ 17.291511] alx 0000:3d:00.0 enp61s0: renamed from eth0
[ 17.297244] nvidia-nvlink: Nvlink Core is being initialized, major device number 249
[ 17.299036] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 17.299104] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 17.308631] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=4 (0x1b/0x17/0x15/0x1a/0x0) type:speaker
[ 17.308633] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.308633] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.308634] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.308635] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 17.308635] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.308636] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 17.308637] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.331546] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 17.332628] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 17.332936] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 17.332989] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 17.333041] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 17.333086] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 |
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Sat Jun 15, 2019 11:59 am Post subject: |
|
|
Fulgurance,
Code: | [ 17.308631] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=4 (0x1b/0x17/0x15/0x1a/0x0) type:speaker
[ 17.308633] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.308633] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.308634] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.308635] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 17.308635] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.308636] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 17.308637] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 17.331546] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 17.332628] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 17.332936] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 17.332989] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 17.333041] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 17.333086] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 |
That looks odd. First your analogue sound card card is card0. The C0 in snd_hda_codec_realtek hdaudioC0D0
Then your video card is card0.
Please all of /proc/asound/devices before you start plasma and after you start plasma, if it changes.
Do not filter dmesg. Always put the whole thing onto a pastebin. Often, things that should be there but are missing are as important as the text that appears.
If you filter dmesg, helpers cannot see things that should be there but are missing. That's true for any log. Pastebin the whole thing. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Sat Jun 15, 2019 1:44 pm Post subject: |
|
|
Full dmesg log: https://pastebin.com/dXMJGP1M
/proc/asound/devices before and after start plasma (same output):
Code: | fulgurance@msi-gs73vr-6rf ~ $ cat /proc/asound/devices
2: [ 0- 0]: digital audio playback
3: [ 0- 0]: digital audio capture
4: [ 0- 1]: digital audio playback
5: [ 0- 3]: digital audio playback
6: [ 0- 7]: digital audio playback
7: [ 0- 8]: digital audio playback
8: [ 0- 9]: digital audio playback
9: [ 0-10]: digital audio playback
10: [ 0- 0]: hardware dependent
11: [ 0- 2]: hardware dependent
12: [ 0] : control
33: : timer |
|
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Wed Jun 19, 2019 1:08 pm Post subject: |
|
|
No idea ? What software have role to autodetect sound Card and codec ? If in past, my sound Card work, i can use old version of this software |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Wed Jun 19, 2019 7:12 pm Post subject: |
|
|
Fulgurance,
Your /proc/asound/devices is correct for a single analogue sound card.
Code: | 2: [ 0- 0]: digital audio playback
3: [ 0- 0]: digital audio capture | are your default playback and microphone devices.
dmesg: | [ 1.477712] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_27.bin failed with error -2
[ 1.477714] i915 0000:00:02.0: Failed to load DMC firmware i915/skl_dmc_ver1_27.bin. Disabling runtime power management. |
Code: | [ 1.527823] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.527823] cfg80211: failed to load regulatory.db |
Code: | [ 2.052632] psmouse serio1: elantech: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience. |
all tell of missing firmware and kernel options. While that's interesting and should be fixed, its not related to sound.
Your HDMI and analogue sound outputs are all on ore sound card.
snd_hda_intel can drive analogue or digital sound but only one at a time. If both are unmuted, digital wins.
Run alsamixer and ensure all the digital outputs are muted. They will have HDMI, IEC or SPDI/F in their names. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Thu Jun 20, 2019 10:20 pm Post subject: |
|
|
I have fixed it, but again same problem.... why ??? |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Thu Jun 20, 2019 10:24 pm Post subject: |
|
|
Fulgurance,
Is alsasound in the default runlevel?
That's the service that preserves and restores the mixer settings across reboots.
Without that, sound will always start muted.
If use use systemd, you don't have a default runlevel. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Thu Jun 20, 2019 10:52 pm Post subject: |
|
|
I have set alsasound at boot level, is it bad? (i use openrc, i love it) |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Tue Jun 25, 2019 11:07 am Post subject: |
|
|
I have made new gentoo installation with stable package, and i have sound. I think one testing package make this problem, but i don't know what...
I stop to use all testing package, many problems ... |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54099 Location: 56N 3W
|
Posted: Tue Jun 25, 2019 11:13 am Post subject: |
|
|
Fulgurance,
The handbook says to put alsasound in the boot runlevel,
The boot runlevel should only contain things needed to get the system into the single user state, so you can fix things.
I really don't need sound for that, so I put alsasound in the default runlevel.
Both work, both are correct.
I suspect your new install has a different configuration to your testing install.
The ala bits may even be the same versions. Not all packages have testing versions. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Tue Jun 25, 2019 11:54 am Post subject: |
|
|
I'm afraid to update to testing all package and have again no sound, and re install all again... |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Sun Jun 30, 2019 8:11 am Post subject: |
|
|
Hello, me again
After global update to testing package, again this problem... no sound.
An problem isn't kernel, because, when i start with stable kernel, sound don't work.
I think something is broken...
What other software manage sound and can break autodetection ? |
|
Back to top |
|
|
Fulgurance Veteran
Joined: 15 Feb 2017 Posts: 1198
|
Posted: Mon Aug 19, 2019 9:26 am Post subject: |
|
|
Finally solved, i just need to set only CONFIG_SND_HDA_INTEL as module, and not other settings. And i dont need to pass any argument. When i reboot, it's okay ! |
|
Back to top |
|
|
|