| View previous topic :: View next topic |
| Author |
Message |
guill73
n00b
Joined: 16 May 2015
Posts: 26
Location: Santa Cruz de la Sierra - Bolivie
|
 Posted: Tue May 28, 2019 9:15 pm Post subject: [Microbit] pas de ttyUSB0 (Résolu) |
 |
|
Bonjour
je cherche à connecter une carte microbit pour y accéder en REPL
pour cela je suis sensé utiliser le device ttyUSB0 mais aucun fichier de ce type n'est créé quand je la branche.
je soupçonne un module noyau ou bien une config de udev, mais jusqu'ici je n'ai rien trouvé de concluant
Merci d'avance
_________________
GuiΩ
Last edited by guill73 on Sat Oct 19, 2019 2:40 pm; edited 1 time in total |
|
| Back to top |
|
 |
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Tue May 28, 2019 9:24 pm Post subject: |
|
|
Hello,
Que dit lsusb ?
As-tu installé un pilote série USB genre FTDI ?
dans Device drivers / USB / USB Serial Converter
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
guill73
n00b
Joined: 16 May 2015
Posts: 26
Location: Santa Cruz de la Sierra - Bolivie
|
| Posted: Tue May 28, 2019 9:53 pm Post subject: |
|
|
Bonjour et merci pour ta réponse
lsusb -v :
| Code: | Bus 003 Device 004: ID 0d28:0204 NXP ARM mbed
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0d28 NXP
idProduct 0x0204 ARM mbed
bcdDevice 10.00
iManufacturer 1 ARM
iProduct 2 DAPLink CMSIS-DAP
iSerial 3 9900000049734e45003180170000005f0000000097969901
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0082
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 7 USB_MSC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6 CMSIS-DAP
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 33
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 1
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 2 Abstract (modem)
bFunctionProtocol 1 AT-commands (v.25ter)
iFunction 4 mbed Serial Port
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 4 mbed Serial Port
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 2
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
CDC Union:
bMasterInterface 1
bSlaveInterface 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 5 mbed Serial Port
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
|
Dans le noyau, j' activé
- USB Generic Serial Driver
- USB Serial Simple Driver
- USB FTDI Single Port Serial Driver
Merci
_________________
GuiΩ |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Wed May 29, 2019 7:39 pm Post subject: |
|
|
Est-ce résolu ?
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
guill73
n00b
Joined: 16 May 2015
Posts: 26
Location: Santa Cruz de la Sierra - Bolivie
|
| Posted: Wed May 29, 2019 9:04 pm Post subject: |
|
|
Non ce n'est pas résolu, ceci est l'état de ma machine au moment où j'ai posté ma question.
_________________
GuiΩ |
|
| Back to top |
|
|
xaviermiller
Bodhisattva
Joined: 23 Jul 2004
Posts: 8708
Location: ~Brussels - Belgique
|
| Posted: Thu May 30, 2019 9:29 am Post subject: |
|
|
ne pourrais-tu pas activer tous les modules USB Serial ?
_________________
Kind regards,
Xavier Miller |
|
| Back to top |
|
|
YetiBarBar
Guru
Joined: 23 Dec 2005
Posts: 532
|
| Posted: Thu May 30, 2019 12:29 pm Post subject: |
|
|
Ta carte se présente comme un dispositif USB-CDC, il se présente probablement comme /dev/ttyACMx (x = {0,1,2,...})
Que dit : quelques secondes après le branchement? |
|
| Back to top |
|
|
guill73
n00b
Joined: 16 May 2015
Posts: 26
Location: Santa Cruz de la Sierra - Bolivie
|
| Posted: Sat Oct 19, 2019 2:06 pm Post subject: |
|
|
Bonjour,
Toutes mes excuses, j'ai eu des petits changements dans ma vie personnelle ce qui explique mon interruption de la conversation.
Mais mon problème demeure.
Voici les information données par dmesg après le branchement:
| Code: |
[19070.884960] usb 1-5.1: new full-speed USB device number 10 using xhci_hcd
[19070.975085] usb 1-5.1: New USB device found, idVendor=0d28, idProduct=0204, bcdDevice=10.00
[19070.975090] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19070.975094] usb 1-5.1: Product: DAPLink CMSIS-DAP
[19070.975096] usb 1-5.1: Manufacturer: ARM
[19070.975099] usb 1-5.1: SerialNumber: 9900000049734e45003180170000005f0000000097969901
[19070.996264] usb-storage 1-5.1:1.0: USB Mass Storage device detected
[19070.996655] scsi host3: usb-storage 1-5.1:1.0
[19070.998225] hid-generic 0003:0D28:0204.0007: hiddev97,hidraw3: USB HID v1.00 Device [ARM DAPLink CMSIS-DAP] on usb-0000:00:14.0-5.1/input3
[19072.047320] scsi 3:0:0:0: Direct-Access MBED VFS 0.1 PQ: 0 ANSI: 2
[19072.047688] sd 3:0:0:0: Attached scsi generic sg0 type 0
[19072.048196] sd 3:0:0:0: [sda] 16512 512-byte logical blocks: (8.45 MB/8.06 MiB)
[19072.048433] sd 3:0:0:0: [sda] Write Protect is off
[19072.048438] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00
[19072.048692] sd 3:0:0:0: [sda] No Caching mode page found
[19072.048695] sd 3:0:0:0: [sda] Assuming drive cache: write through
[19072.067579] sd 3:0:0:0: [sda] Attached SCSI removable disk
|
Cordialement
_________________
GuiΩ |
|
| Back to top |
|
|
guill73
n00b
Joined: 16 May 2015
Posts: 26
Location: Santa Cruz de la Sierra - Bolivie
|
| Posted: Sat Oct 19, 2019 2:39 pm Post subject: |
|
|
Bonjour
A priori c'est résolu.
C'est ton message à propos de USB-CDC qui m'a mis la puce à l'oreille : en activant
USB Modem (CDC ACM) support
dans le noyau, j'ai bien un périphérique ttyACM0 qui apparait.
Merci beaucoup
_________________
GuiΩ |
|
| Back to top |
|
|
|
French
