| View previous topic :: View next topic |
| Author |
Message |
Vrenn
Guru
Joined: 15 Dec 2004
Posts: 318
|
 Posted: Wed Mar 06, 2019 2:31 pm Post subject: [solved] freshclam hangs using max cpu time on one core |
 |
|
Dear Gentoo - experts
I don't know if it was the gcc-upgrade to 8.2.0-r6 p1.7 but since some short time ago the freshclam process is stressing one core as long as it runs.
Reproduceabe always by systemctl start clamav-freshclam or manually starting freshclam (at the end, after some minutes used, control-c) | Code: | # freshclam
ClamAV update process started at Wed Mar 6 15:12:26 2019
main.cld is up to date (version: 58, sigs: 4566249, f-level: 60, builder: sigmgr)
Downloading daily-25380.cdiff [100%]
:q
^CUpdate process terminated
~ # freshclam
ClamAV update process started at Wed Mar 6 15:22:15 2019
main.cld is up to date (version: 58, sigs: 4566249, f-level: 60, builder: sigmgr)
Downloading daily-25380.cdiff [100%]
^CUpdate process terminated
~ # freshclam
ClamAV update process started at Wed Mar 6 15:22:26 2019
main.cld is up to date (version: 58, sigs: 4566249, f-level: 60, builder: sigmgr)
Downloading daily-25380.cdiff [100%]
^CUpdate process terminated
|
It does download the update but then somehow hangs?
Seems it did not finish the daily-25380 at all.
Tested clamav 0.101.0 & 0.101.1
Used useflags for clamav: app-antivirus/clamav-0.101.0::gentoo [0.101.1::gentoo] USE="bzip2 iconv ipv6 xml -clamdtop -doc -libressl -metadata-analysis-api -milter (-selinux) -static-libs -test (-uclibc)"
Thank you for any idea.
_________________
With nice greetings
Vrenn
Last edited by Vrenn on Fri Mar 08, 2019 7:19 pm; edited 2 times in total |
|
| Back to top |
|
 |
Vrenn
Guru
Joined: 15 Dec 2004
Posts: 318
|
| Posted: Wed Mar 06, 2019 7:33 pm Post subject: |
|
|
Perhaps I found it, but not in this forum or anywhere else so I let this post stand for someone else give it a try.
As freshclam hangs up on updating the daily signatures as a diff, the diff-routine, or the database itself might be damaged.
So I searched for a way to reset the whole clamav-database, but no luck.
Fustrated and unwilling to wait lead to following:
1) stop the demons (clamd or frechclam, with systemd: systemctl stop clamav-daemon && systemctl stop clamav-freshclam)
2) mv /var/lib/clamav/ to somewhere lese
3) emerge clamav again
4) run freshclam manually to download and fill /var/lib/clamav/ signatures new
Now freshclam downloaded main, daily and bytecode, and can be rerun telling me databases are up to date. I hope this was it and a new daily doesn't start the cpu-eater again.
_________________
With nice greetings
Vrenn |
|
| Back to top |
|
|
Moriah
Advocate
Joined: 27 Mar 2004
Posts: 2365
Location: Kentucky
|
| Posted: Mon Mar 11, 2019 1:07 pm Post subject: |
|
|
I have the same problem here. I thought about a re-install, but then I decided to search this forum first.
Did the re-install fix your problem? I suspect yes, since its been several days since you posted. Please let us know.
_________________
The MyWord KJV Bible tool is at http://www.elilabs.com/~myword
Foghorn Leghorn is a Warner Bros. cartoon character. |
|
| Back to top |
|
|
Vrenn
Guru
Joined: 15 Dec 2004
Posts: 318
|
| Posted: Mon Mar 11, 2019 1:26 pm Post subject: |
|
|
Several days after yes, no cpu-eating freshclam appeared.
A "systemctl stop clamav-freshclam && freshclam" tells me the signatures are up to date.
I believe a database-refresh would be sufficient, but as I don't know what file to exactly clean, I moved/deleted the whole directory with a save re-emerge.
Don't be surprised that the systemd (or openrc?) initscripts don't work after that, they demand a manual "freshclam" execution first. (as I remember, and they will tell you in console)
_________________
With nice greetings
Vrenn |
|
| Back to top |
|
|
Apheus
Guru
Joined: 12 Jul 2008
Posts: 422
|
| Posted: Mon Mar 11, 2019 3:25 pm Post subject: |
|
|
I straced it, and it actually does something:
| Code: | 7200 brk(0x5569de121000) = 0x5569de121000
7200 read(5, "\257Na\337;\224\353\251\v\233\231\2l\271J\231m\7\371y\217,\25\254m\335\346^z7\366\363"..., 8192) = 8192
7200 read(5, "\23\237jG\216\4\303\321\202\3076\317\252\3739\353\311\31\341\312\236d\247\306@\225\232\7\30\260W\223"..., 8192) = 8192
7200 brk(0x5569de142000) = 0x5569de142000
7200 read(5, "\242\230\27[.\270xj\237\271\311\321\333\36\347h\n\202\363\332Z7{Ii?\226\302\24\202}]"..., 8192) = 8192
7200 read(5, "\347\4w5\t\302;\354\351\266@o\236\342-\31D\360\340\315V\244#o\3626\5\330\325[\226\366"..., 8192) = 8192
7200 brk(0x5569de163000) = 0x5569de163000
7200 read(5, "Uf8STu\370\236\262\276\217\260\244,\200\273bx)\265\\\214\347T\224\25\270\360\272lm\321"..., 8192) = 8192
7200 read(5, "\234@\272:\317\225\270\5\346\2117\2371)W\235V\226\235\243w\37\371JF%0\254\232\201=;"..., 8192) = 8192
7200 read(5, "`\3GM?\217>\202x\215\36\223\261\304\274w\277r(H\326\320u:\21.\3*\217\22\21\244"..., 8192) = 8192
7200 brk(0x5569de184000) = 0x5569de184000
7200 read(5, "p\373K\211\225\354Q\213\353\303\357\260\6\252]Iyq\264v\257wX\7\343}+\310\314\2602^"..., 8192) = 8192
7200 read(5, "\361el{\212+\30y\201T;\"\322\234k\355\217\34\242@\320=\253\270\256\366.\353~n%\10"..., 8192) = 8192
7200 brk(0x5569de1a5000) = 0x5569de1a5000
7200 read(5, "\1\36:\307)Y\231\372\310\363\331T\220\303'.\255E\325\212\370\20!\r\230\262\352h\370\2658\201"..., 8192) = 8192
7200 read(5, "\375\316GA\237\33\376\276\271\213\304\0\2736E\32\265%\337\363\263R$!\210\240\257\235:bf\367"..., 8192) = 8192
7200 read(5, "\326u\365D\253q=\257\247\234\24\"l\21\t-\332\3\317\213\220\301\312\336\33\221\346T\367>u\30"..., 8192) = 8192
7200 brk(0x5569de1c6000) = 0x5569de1c6000
7200 read(5, "\375\320V\211@6\307\360\332c\272\345\371\334\254\224\30\224\257\220R\241\247\205\177\315\32KI@\326\315"..., 8192) = 8192
7200 read(5, "`z\232f\257]HL\374L\33\10\2438Gr5\361\230\2752>\10n\325\34<t\231C\346}"..., 8192) = 8192
7200 brk(0x5569de1e7000) = 0x5569de1e7000
7200 read(5, "\243]\2670H\37\233\332\r\301huy)j\255X\17\34\343F\200\367P\20\37\366\322\346\375\234l"..., 8192) = 8192
7200 read(5, "q\301\0m\226\2433+\22o|~^\27Ah\364}\261n\316\332|?\367\224\213\20\314l\367\215"..., 8192) = 8192
7200 read(5, "\265\267\242i=z\237i\201\322U\337;h\263\256\327\205b\206\320\v\245\265d]*\253\307\210mF"..., 8192) = 8192
7200 brk(0x5569de208000) = 0x5569de208000
7200 read(5, "[A\227\177\326,8!\204\356\262\220\346\332\343\267wGXV\241ts\33\356\220'^\323\235\240\263"..., 8192) = 8192
7200 read(5, "\244\21\257Ex\321\374\251\370g\24\234\253\273;\205\255\254\366\343\203e\",\332\227\257-[\247\362<"..., 8192) = 8192
7200 brk(0x5569de229000) = 0x5569de229000
|
Stuff like this repeats over and over again. And awfully slow.
Update:
After 35 min, it finished and returned:
| Code: | 7200 close(5) = 0
7200 getdents(4, /* 0 entries */, 32768) = 0
7200 close(4) = 0
7200 stat("/var/log/clamav/freshclam.log", {st_mode=S_IFREG|0640, st_size=2350, ...}) = 0
7200 write(3, "Database updated (6077588 signat"..., 83) = 83
7200 write(1, "Database updated (6077588 signat"..., 83) = 83
7200 openat(AT_FDCWD, "/etc/clamd.conf", O_RDONLY) = 4
7200 fstat(4, {st_mode=S_IFREG|0644, st_size=23647, ...}) = 0
7200 read(4, "##\n## Example config file for th"..., 4096) = 4096
7200 read(4, "will timeout after this time (se"..., 4096) = 4096
7200 read(4, "intend to handle \"*.Heuristics.*"..., 4096) = 4096
7200 read(4, "many emails.\n# You will need to "..., 4096) = 4096
7200 read(4, "\n# Default: 5M\n#MaxScriptNormali"..., 4096) = 4096
7200 read(4, "nder\n# root with be able to acce"..., 4096) = 3167
7200 read(4, "", 4096) = 0
7200 close(4) = 0
7200 socket(AF_UNIX, SOCK_STREAM, 0) = 4
7200 connect(4, {sa_family=AF_UNIX, sun_path="/var/run/clamav/clamd.sock"}, 110) = -1 ENOENT (No such file or directory)
7200 stat("/var/log/clamav/freshclam.log", {st_mode=S_IFREG|0640, st_size=2433, ...}) = 0
7200 write(3, "WARNING: Clamd was NOT notified:"..., 118) = 118
7200 write(2, "WARNING: Clamd was NOT notified:"..., 118) = 118
7200 close(4) = 0
7200 alarm(0) = 0
7200 exit_group(0) = ?
7200 +++ exited with 0 +++
|
_________________
My phrenologist says I'm stupid. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
