| View previous topic :: View next topic |
| Author |
Message |
SumDog
n00b
Joined: 16 Dec 2005
Posts: 20
Location: Chicago, USA
|
 Posted: Sat Feb 23, 2019 8:28 am Post subject: Wireless and Bluetooth on an ROG Strix X470-I |
 |
|
I've got an Asus ROG Strix X470-I (AMD/Ryzen) motherboard. Ethernet on it works fine, but I want to use the Wi-Fi and Bluetooth controller as well, but I can't figure out the right Kernel modules to load. In lshw I see these:
| Code: |
...
*-usb:2
description: Bluetooth wireless interface
product: Bluetooth Radio
vendor: Realtek
physical id: c
bus info: usb@1:c
version: 1.10
serial: 00e04c000001
capabilities: bluetooth usb-1.10
configuration: driver=btusb maxpower=500mA speed=12Mbit/s
...
*-network UNCLAIMED
description: Network controller
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: ioport:c000(size=256) memory:fe300000-fe30ffff
...
|
I've tried the rtl8821ae module, but that doesn't add a Wi-Fi device or give me any output in dmesg. If I run dmesg | grep -i blue, I see no Bluetooth messages either. I know I have all the right kernel selections for Bluetooth because I can plugin a broadcom dongle and it does show up in bluetoothctl and using the legacy hictool, neither of which detect the onboard bluetooth.
I'm a little confused that the onboard bluetooth seems to be listed as a USB device. Shouldn't it be connected to the PCI-E bus like the Wi-Fi adapter?
lsusb shows all the Realtek devices as having the id/vendor as 0bda:0411.
What kernel modules/options should I be selecting for this hardware? |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54211
Location: 56N 3W
|
| Posted: Sun Feb 24, 2019 10:44 am Post subject: |
|
|
SumDog,
Post the output of and
We need the vendor and device IDs of both devices.
Google says that 0bda:0411 is a Device '4-Port USB 3.0 Hub'
That will need | Code: | CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y |
in your kernel.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
