| View previous topic :: View next topic |
| Author |
Message |
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
 Posted: Thu Oct 04, 2018 9:24 pm Post subject: [SOLVED]New stage 3 chroot,emerge fails package installation |
 |
|
Hello,
As title suggests emerge fails installing certain packages.
| Code: | * ERROR: dev-libs/openssl-1.0.2p::gentoo failed (configure phase):
* (no error message)
* ERROR: dev-libs/elfutils-0.170-r1::gentoo failed (compile phase):
* emake failed
|
These are just examples I know at least one other package that failed.
However not all packages fail...
| Code: |
>>> Installing (1 of 7) app-portage/cpuid2cpuflags-5::gentoo
* QA Notice: mime-info files were found installed but mime-info
* cache has not been updated:
* /usr/share/mime/packages/freedesktop.org.xml
* Please make sure to call xdg_mimeinfo_database_update()
* in pkg_postinst() and pkg_postrm() phases of appropriate pkgs.
>>> Recording app-portage/cpuid2cpuflags in "world" favorites file...
|
I have confirmed that /dev /proc and /sys have been mounted to new chroot environment.
What else should I look out for?
Additional Information:
Installing from Gentoo LiveCD
[Moderator edit: added [code] tags to preserve output layout. -Hu]
Last edited by volt150 on Sun Oct 07, 2018 2:33 am; edited 2 times in total |
|
| Back to top |
|
 |
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Thu Oct 04, 2018 9:25 pm Post subject: |
|
|
What are the CFLAGS you use in /etc/portage/make.conf ?
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
| Posted: Thu Oct 04, 2018 9:27 pm Post subject: |
|
|
| Muso wrote: | | What are the CFLAGS you use in /etc/portage/make.conf ? |
CFLAGS="-O2 -pipe" |
|
| Back to top |
|
|
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Thu Oct 04, 2018 9:33 pm Post subject: |
|
|
| volt150 wrote: | | Muso wrote: | | What are the CFLAGS you use in /etc/portage/make.conf ? |
CFLAGS="-O2 -pipe" |
What profile did you select? Which stage tarball? What USE flags did you place into make.conf? Which install iso are you using?
etc etc
The more information you provide, the easier it will be to diagnose the problem.
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Thu Oct 04, 2018 9:36 pm Post subject: Re: Fresh stage 3 chroot, emerge fails package installation |
|
|
| volt150 wrote: | | Installing from Gentoo LiveCD |
The one from 2016?
You should grab a minimal installation CD. The liveDVD is very out of date.
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
| Posted: Thu Oct 04, 2018 9:44 pm Post subject: |
|
|
| Muso wrote: | | volt150 wrote: | | Muso wrote: | | What are the CFLAGS you use in /etc/portage/make.conf ? |
CFLAGS="-O2 -pipe" |
What profile did you select? Which stage tarball? What USE flags did you place into make.conf? Which install iso are you using?
etc etc
The more information you provide, the easier it will be to diagnose the problem. |
My apologies I am not sure what is relevant.
Profile selected? = [12] default/linux/amd64/17.0 (stable) *
Which stage tarball? = Stage3
What USE flags did you place into make.conf? = I did not add any USE flags to make.conf, here is my entire make.conf
| Code: |
# These settings were set by the catalyst build script that automati$
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a m$
# detailed example.
CFLAGS="-O2 -pipe"
# NOTE: This stage was built with the bindist Use flag enabled
PORTDIR="/usr/portage"
DISTDIR="/usr/portage/distfiles"
PKGDIR="/usr/portage/packages"
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C
MAKEOPTS="-j12"
GENTOO_MIRRORS="http://gentoo.cs.utah.edu/"
|
Which install iso are you using? = I am using the liveCD
The install was done using a script I made which one to one practically copies the handbook, I have installed multiple installations successfully using this script, I have reviewed handbook to see if anything has changed and have not found any relevant changes.
Hardware on this system:
| Code: |
*-core
description: Motherboard
product: Z370 Taichi
vendor: ASRock
physical id: 0
*-cpu
description: CPU
product: Core i7 (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 19
bus info: cpu@0
version: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz
|
|
|
| Back to top |
|
|
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
| Posted: Thu Oct 04, 2018 9:45 pm Post subject: Re: Fresh stage 3 chroot, emerge fails package installation |
|
|
| Muso wrote: | | volt150 wrote: | | Installing from Gentoo LiveCD |
The one from 2016?
You should grab a minimal installation CD. The liveDVD is very out of date. |
Ok Ill try the minimal installation CD. |
|
| Back to top |
|
|
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Thu Oct 04, 2018 9:51 pm Post subject: |
|
|
For the CFLAGS :
| Code: | CFLAGS="-O2 -pipe -march=native"
CXXFLAGS="${CFLAGS}" |
Should be fine for that CPU.
I think the recommended MAKEOPTS should be -j7 as that cpu has 6 cores.
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
| Posted: Fri Oct 05, 2018 1:51 am Post subject: Re: Fresh stage 3 chroot, emerge fails package installation |
|
|
| Muso wrote: | | volt150 wrote: | | Installing from Gentoo LiveCD |
The one from 2016?
You should grab a minimal installation CD. The liveDVD is very out of date. |
You where right Muso, emerge installs packages successfully with the minimal installation iso.
Side question: -j is supposed to be thread count no? |
|
| Back to top |
|
|
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Fri Oct 05, 2018 2:02 am Post subject: Re: Fresh stage 3 chroot, emerge fails package installation |
|
|
| volt150 wrote: | | Muso wrote: | | volt150 wrote: | | Installing from Gentoo LiveCD |
The one from 2016?
You should grab a minimal installation CD. The liveDVD is very out of date. |
You where right Muso, emerge installs packages successfully with the minimal installation iso.
Side question: -j is supposed to be thread count no? |
Ah, Logical processors count. So -j12 is ideal for that CPU. Hopefully you have plenty of ram.
https://wiki.gentoo.org/wiki/MAKEOPTS
From the above article :
| Quote: | | Another item to consider is RAM usage. Recent gcc versions have been known to take 1 GB to 1.5 GB of RAM per job. If the system has the 8 logical CPUs from the previous example, but only 4 GB RAM, the MAKEOPTS value should be lowered to -j3. This is so that the system has RAM to run the basics as well as compile without hitting swap very often slowing things down. |
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
volt150
n00b
Joined: 15 May 2018
Posts: 11
|
| Posted: Fri Oct 05, 2018 2:50 am Post subject: |
|
|
oh I didnt know it had such RAM requirements.
I have 16GB on this machine, I will keep a close eye during builds, if I see it use swap then its time to throw in another 16GB stick! |
|
| Back to top |
|
|
Muso
Veteran
Joined: 22 Oct 2002
Posts: 1052
Location: The Holy city of Honolulu
|
| Posted: Fri Oct 05, 2018 2:59 am Post subject: |
|
|
| volt150 wrote: | oh I didnt know it had such RAM requirements.
I have 16GB on this machine, I will keep a close eye during builds, if I see it use swap then its time to throw in another 16GB stick! |
++
All good! -j13 would be ideal if ram isn't an issue. -j = 1 per logical processor +1.
Enjoy the fun (and frustration) in building this new system. 
_________________
"You can lead a horticulture but you can't make her think" ~ Dorothy Parker
2021 is the year of the Linux Desktop! |
|
| Back to top |
|
|
|
Installing Gentoo
