musv
Advocate
Joined: 01 Dec 2002
Posts: 3337
Location: de
|
 Posted: Wed Sep 26, 2018 3:37 pm Post subject: IRQ Problem |
 |
|
Hi there,
since about one year I have a problem, when I plug a USB device into the front USB ports:
| journalctl: | Sep 19 18:35:42 hexe kernel: ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Sep 19 18:35:42 hexe kernel: ftdi_sio 4-2:1.0: device disconnected
Sep 19 18:35:42 hexe upowerd[577]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0
Sep 19 18:35:42 hexe upowerd[577]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2
Sep 19 18:35:50 hexe kernel: irq 9: nobody cared (try booting with the "irqpoll" option)
Sep 19 18:35:50 hexe kernel: CPU: 1 PID: 0 Comm: swapper/1 Tainted: P O 4.18.7-gentoo #1
Sep 19 18:35:50 hexe kernel: Hardware name: Dell Inc. Precision WorkStation T5500 /0CRH6C, BIOS A16 05/28/2013
Sep 19 18:35:50 hexe kernel: Call Trace:
Sep 19 18:35:50 hexe kernel: <IRQ>
Sep 19 18:35:50 hexe kernel: dump_stack+0x46/0x60
Sep 19 18:35:50 hexe kernel: __report_bad_irq+0x32/0xa9
Sep 19 18:35:50 hexe kernel: note_interrupt.cold.0+0xa/0x68
Sep 19 18:35:50 hexe kernel: handle_irq_event_percpu+0x65/0x70
Sep 19 18:35:50 hexe kernel: handle_irq_event+0x22/0x3f
Sep 19 18:35:50 hexe kernel: handle_fasteoi_irq+0x7a/0x120
Sep 19 18:35:50 hexe kernel: handle_irq+0x17/0x20
Sep 19 18:35:50 hexe kernel: do_IRQ+0x44/0xd0
Sep 19 18:35:50 hexe kernel: common_interrupt+0xf/0xf
Sep 19 18:35:50 hexe kernel: </IRQ>
Sep 19 18:35:50 hexe kernel: RIP: 0010:cpuidle_enter_state+0x79/0x210
Sep 19 18:35:50 hexe kernel: Code: e6 48 89 ef e8 a8 51 5a 00 89 c3 e8 21 d7 a2 ff 65 8b 3d ca 12 9b 7e e8 b5 d5 a2 ff 31 ff 49 89 c4 e8 0>
Sep 19 18:35:50 hexe kernel: RSP: 0018:ffffc9000007fea8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffffde
Sep 19 18:35:50 hexe kernel: RAX: ffff88060b05f680 RBX: 0000000000000001 RCX: 0000001d60517d99
Sep 19 18:35:50 hexe kernel: RDX: 0000001d60517d99 RSI: 0000000000000000 RDI: 0000000000000000
Sep 19 18:35:50 hexe kernel: RBP: ffff88060b069c00 R08: 00000062272930bc R09: 0000000000000000
Sep 19 18:35:50 hexe kernel: R10: 00000000ffffffff R11: ffff88060b05e928 R12: 0000001d60517d99
Sep 19 18:35:50 hexe kernel: R13: 0000001d605176ff R14: 0000000000000001 R15: 0000000000000000
Sep 19 18:35:50 hexe kernel: ? cpuidle_enter_state+0x75/0x210
Sep 19 18:35:50 hexe kernel: do_idle+0x1e0/0x210
Sep 19 18:35:50 hexe kernel: cpu_startup_entry+0x6a/0x70
Sep 19 18:35:50 hexe kernel: start_secondary+0x183/0x1b0
Sep 19 18:35:50 hexe kernel: secondary_startup_64+0xa5/0xb0
Sep 19 18:35:50 hexe kernel: handlers:
Sep 19 18:35:50 hexe kernel: [<00000000aae421ba>] acpi_irq
Sep 19 18:35:50 hexe kernel: Disabling IRQ #9 |
| cat /proc/interrupts: | CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11
0: 109 0 0 0 0 0 0 0 0 0 0 0 IR-IO-APIC 2-edge timer
1: 0 0 0 4 0 0 0 0 0 0 0 0 IR-IO-APIC 1-edge i8042
8: 0 0 0 0 1 0 0 0 0 0 0 0 IR-IO-APIC 8-edge rtc0
9: 0 0 0 0 0 0 0 0 0 0 0 0 IR-IO-APIC 9-fasteoi acpi
12: 0 0 5 0 0 0 0 0 0 0 0 0 IR-IO-APIC 12-edge i8042
16: 0 0 0 0 0 0 0 0 0 0 1311 0 IR-IO-APIC 16-fasteoi uhci_hcd:usb3, snd_oxygen_lib
17: 0 0 0 0 0 0 0 0 0 0 0 0 IR-IO-APIC 17-fasteoi uhci_hcd:usb4, uhci_hcd:usb7
18: 0 2827 0 0 0 0 0 0 0 0 0 0 IR-IO-APIC 18-fasteoi uhci_hcd:usb8
20: 0 0 0 0 0 3 0 0 0 0 0 0 IR-IO-APIC 20-fasteoi i801_smbus
22: 0 0 0 0 0 0 0 0 2 0 0 0 IR-IO-APIC 22-fasteoi ehci_hcd:usb1, uhci_hcd:usb5
23: 0 0 0 0 0 0 0 0 0 2 0 0 IR-IO-APIC 23-fasteoi ehci_hcd:usb2, uhci_hcd:usb6
24: 0 0 27063 0 0 0 0 0 0 0 0 0 IR-PCI-MSI 512000-edge ahci0
25: 0 0 0 253 0 0 0 0 0 0 0 0 IR-PCI-MSI 512001-edge ahci1
26: 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI 512002-edge ahci2
27: 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI 512003-edge ahci3
28: 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI 512004-edge ahci4
29: 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI 512005-edge ahci5
40: 0 0 0 0 0 0 550 0 0 0 0 0 IR-PCI-MSI 442368-edge snd_hda_intel:card1
42: 0 0 0 0 0 0 0 47200 0 0 0 0 IR-PCI-MSI 3145728-edge eth0
43: 0 0 0 0 0 0 0 0 20901 0 0 0 IR-PCI-MSI 1572864-edge nvidia
72: 0 0 0 0 0 0 0 0 0 0 0 0 DMAR-MSI 0-edge dmar0
73: 0 0 0 0 0 0 0 0 0 0 0 0 DMAR-MSI 1-edge dmar1
NMI: 0 0 0 0 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 57908 46848 55115 42184 48125 36875 34170 41153 39821 35652 44050 37458 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 12544 11883 11091 7173 10831 7666 6795 7732 9897 6348 8798 6638 IRQ work interrupts
RTR: 11 0 0 0 0 0 0 0 0 0 0 0 APIC ICR read retries
RES: 15954 8242 2265 679 1402 663 361 1282 690 359 463 229 Rescheduling interrupts
CAL: 8119 4597 3249 4948 3054 3503 4015 3527 3670 4397 3310 3636 Function call interrupts
TLB: 5926 3009 1344 3084 1049 1521 2207 1691 1822 2810 1508 1749 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 3 3 3 3 3 3 3 3 3 3 3 Machine check polls
ERR: 0
MIS: 0
PIN: 0 0 0 0 0 0 0 0 0 0 0 0 Posted-interrupt notification event
NPI: 0 0 0 0 0 0 0 0 0 0 0 0 Nested posted-interrupt event
PIW: 0 0 0 0 0 0 0 0 0 0 0 0 Posted-interrupt wakeup event |
My machine is an old Dell T5500 workstation. How I said, this problems started about 1 year ago. Before I never had problems with USB devices.
According to DebuggingIRQProblems I tried already with:
- noapic: nothing changes
- pci=noacpi: computer didn't boot anymore, only black screen after Grub
- irqpoll: when I plug an usb-device the log was filling with timer problems. The device didn't work anyway
Theres nothing in the BIOS found to be changed regarding Interrupts or ACPI. |
|
Kernel & Hardware
