Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Eee pc 2G surf Intel Celeron M[SOLVE]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Thu Jul 19, 2018 6:15 am    Post subject: Eee pc 2G surf Intel Celeron M[SOLVE] Reply with quote

I buy a old eee pc 2G Intel Celeron M ULV 800MHz (is this cpu?)

i got a problem choice
Processor type and features
Processor family
Code:

 ( ) 386
        ( ) 486
        ( ) 586/K5/5x86/6x86/6x86MX
        ( ) Pentium-Classic
        ( ) Pentium-MMX
        ( ) Pentium-Pro
        ( ) Pentium-II/Celeron(pre-Coppermine)
        ( ) Pentium-III/Celeron(Coppermine)/Pentium-III Xeon
        ( ) Pentium M
        ( ) Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon
        ( ) K6/K6-II/K6-III
        ( ) Athlon/Duron/K7
        ( ) Opteron/Athlon64/Hammer/K8
        ( ) Crusoe
        ( ) Efficeon
        ( ) Winchip-C6
        ( ) Winchip-2
        ( ) Winchip-2A/Winchip-3
        ( ) GeodeGX1
        ( ) Geode GX/LX
        ( ) CyrixIII/VIA-C3
        ( ) VIA C3-2 (Nehemiah)
        ( ) Generic x86 support


( ) Pentium-III/Celeron(Coppermine)/Pentium-III Xeon
( ) Pentium M
i saw wikipaper say Celeron M same as Pentium M
but Pentium M no Celeron so Which option should I choose?
_________________
gentoo user


Last edited by vastchen on Mon Jul 23, 2018 3:23 am; edited 1 time in total
Back to top
View user's profile Send private message
PrSo
Tux's lil' helper
Tux's lil' helper


Joined: 01 Jun 2017
Posts: 121

PostPosted: Thu Jul 19, 2018 9:22 am    Post subject: Reply with quote

IIRC this is SL7DB "Banias" so Pentium M option would be right for this CPU.
https://en.wikipedia.org/wiki/Celeron#Banias-512
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 5234

PostPosted: Thu Jul 19, 2018 12:41 pm    Post subject: Reply with quote

1st gen eeepc is a Pentium M, it also lacks PAE so you need to make sure that's disabled for it to boot.
Back to top
View user's profile Send private message
mike155
Guru
Guru


Joined: 17 Sep 2010
Posts: 566
Location: Frankfurt, Germany

PostPosted: Thu Jul 19, 2018 1:50 pm    Post subject: Reply with quote

Please look here: https://wiki.archlinux.org/index.php/ASUS_Eee_PC

1) Which Eee PC do you have?

2) Please tell us the exact CPU model name. If possible, post the output of
Code:
lscpu
Back to top
View user's profile Send private message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Fri Jul 20, 2018 3:34 am    Post subject: Reply with quote

mike155 wrote:
Please look here: https://wiki.archlinux.org/index.php/ASUS_Eee_PC

1) Which Eee PC do you have?

2) Please tell us the exact CPU model name. If possible, post the output of
Code:
lscpu


ok tonight i will post lscpu the eeepc maybe is Eeepc 700 2G mean 2g ssd 512 ram

Asus Eee PC 2G Surf Specs:
Code:

    800 MHz Intel Celeron ULV processor
    512 MB DDR2 RAM (Soldered to motherboard)
    2 GB Solid State Disk (Soldered to motherboard)
    7" 800×480 LCD monitor
    10/100 Ethernet
    802.11b/g wireless
    VGA port
    SD Card Slot (supporting SDHC)
    4400 mAh Battery (4 cell)

Fromhttp://www.tabletpcreview.com/tabletreview/asus-eee-pc-2g-surf-user-review/
_________________
gentoo user
Back to top
View user's profile Send private message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Fri Jul 20, 2018 1:10 pm    Post subject: Reply with quote

PrSo wrote:
IIRC this is SL7DB "Banias" so Pentium M option would be right for this CPU.
https://en.wikipedia.org/wiki/Celeron#Banias-512


i also think it is Pentium M i will try it :wink:
_________________
gentoo user
Back to top
View user's profile Send private message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Fri Jul 20, 2018 2:54 pm    Post subject: Reply with quote

vastchen wrote:
mike155 wrote:
Please look here: https://wiki.archlinux.org/index.php/ASUS_Eee_PC

1) Which Eee PC do you have?

2) Please tell us the exact CPU model name. If possible, post the output of
Code:
lscpu


ok tonight i will post lscpu the eeepc maybe is Eeepc 700 2G mean 2g ssd 512 ram

Asus Eee PC 2G Surf Specs:
Code:

    800 MHz Intel Celeron ULV processor
    512 MB DDR2 RAM (Soldered to motherboard)
    2 GB Solid State Disk (Soldered to motherboard)
    7" 800×480 LCD monitor
    10/100 Ethernet
    802.11b/g wireless
    VGA port
    SD Card Slot (supporting SDHC)
    4400 mAh Battery (4 cell)

Fromhttp://www.tabletpcreview.com/tabletreview/asus-eee-pc-2g-surf-user-review/

Code:

Architecture:          i686
CPU op-mode(s):        32-bit
Byte Order:            Little Endian
CPU(s):                1
On-line CPU(s) list:   0
Thread(s) per core:    1
Core(s) per socket:    1
Socket(s):             1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 13
Model name:            Intel(R) Celeron(R) M processor          800MHz
Stepping:              8
CPU MHz:               571.344
BogoMIPS:              1142.68
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx bts

_________________
gentoo user
Back to top
View user's profile Send private message
mike155
Guru
Guru


Joined: 17 Sep 2010
Posts: 566
Location: Frankfurt, Germany

PostPosted: Fri Jul 20, 2018 3:52 pm    Post subject: Reply with quote

PrSo and Ant P. are right - Pentium M seems to be the right option. You can disable SMP and frequency scaling. The processor seems to have PAE, so you should enable it in the kernel config,
Back to top
View user's profile Send private message
johngalt
Apprentice
Apprentice


Joined: 09 Sep 2004
Posts: 257
Location: 3rd Rock

PostPosted: Fri Jul 20, 2018 5:06 pm    Post subject: Reply with quote

related question that might help OP:

On my Dell Inspiron 3521, which has a Celeron 1007U (which I found to be listed under Sandy Bridge) I opted to emerge gentoo-sources with USE='experimental', which allowed for greater flexibility in the kernel processor choice under
Code:
Processor type and features ---> Processor family
which I set to
Code:
Native optimizations autodetected by GCC
along with
Code:
CFLAGS="-march=native -O2 -pipe"
in /etc/portage/make.conf.

Going that route, from my understanding, allows for direct optimization, plus no need to worry about 'feature' that might be enabled in non-Celeron processors in the same family, right?

If so, would that be a better route to go, or would it simply be a different (not necessarily any better) route to go versus making sure that
Code:
CPU_FLAGS_X86=
is set up correctly for the Celeron CPU in /etc/portage/make.conf?

Or, is this not good practice?
_________________
desultory wrote:
If you want to retain credibility as a functional adult; when you are told that you are acting boorishly, the correct response is to consider that possibility and act accordingly to correct that behavior.


Amen.
Back to top
View user's profile Send private message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Mon Jul 23, 2018 3:07 am    Post subject: Reply with quote

mike155 wrote:
PrSo and Ant P. are right - Pentium M seems to be the right option. You can disable SMP and frequency scaling. The processor seems to have PAE, so you should enable it in the kernel config,


OK thanks
_________________
gentoo user
Back to top
View user's profile Send private message
vastchen
n00b
n00b


Joined: 22 Apr 2016
Posts: 28

PostPosted: Mon Jul 23, 2018 3:22 am    Post subject: Reply with quote

johngalt wrote:
related question that might help OP:

On my Dell Inspiron 3521, which has a Celeron 1007U (which I found to be listed under Sandy Bridge) I opted to emerge gentoo-sources with USE='experimental', which allowed for greater flexibility in the kernel processor choice under
Code:
Processor type and features ---> Processor family
which I set to
Code:
Native optimizations autodetected by GCC
along with
Code:
CFLAGS="-march=native -O2 -pipe"
in /etc/portage/make.conf.

Going that route, from my understanding, allows for direct optimization, plus no need to worry about 'feature' that might be enabled in non-Celeron processors in the same family, right?

If so, would that be a better route to go, or would it simply be a different (not necessarily any better) route to go versus making sure that
Code:
CPU_FLAGS_X86=
is set up correctly for the Celeron CPU in /etc/portage/make.conf?

Or, is this not good practice?


in make.config file i use this
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium-m -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"

i use a virtualbox to build thse systemd than use nfs to install binpackage . Celeron m 800MHz to slow....

Code:
gcc -v -E -x c -march=native -mtune=native - < /dev/null 2>&1 | grep cc1 | perl -pe 's/ -mno-\S+//g; s/^.* - //g;'
is pentium-m
_________________
gentoo user
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 5234

PostPosted: Mon Jul 23, 2018 10:51 pm    Post subject: Reply with quote

mike155 wrote:
PrSo and Ant P. are right - Pentium M seems to be the right option. You can disable SMP and frequency scaling. The processor seems to have PAE, so you should enable it in the kernel config,

Hmm, my eee701 wouldn't boot until I removed PAE support from my kernel, but maybe the 700 is different.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum