| View previous topic :: View next topic |
| Author |
Message |
jpsollie
Apprentice
Joined: 17 Aug 2013
Posts: 289
|
 Posted: Thu Jun 21, 2018 1:04 pm Post subject: gentoo on MikroTek RBM33G: how to setup? |
 |
|
I used crossdev to build a system for a 1004kc MIPS CPU
I ordered a RBM33G routerboard with a 16gb microSD card, on which I'd like to install gentoo-linux.
Some basic questions:
-how do I load the kernel?
- how do I make it boot from the microSD card instead of the NAND flash (the routeros is too limited for what I'm planning to do with it  )?
- which partition layouts will the MT7621A cpu support?
there is a way which might work, but I'm not sure how:
-boot from LAN (I have a tftp server to put the boot image on)
-write the kernel into the NAND flash storage, and the gentoo OS on the microSD card (but how will I do that?).
-install grub on the microSD card
_________________
The power of Gentoo optimization (not overclocked): [img]https://www.passmark.com/baselines/V10/images/503714802842.png[/img] |
|
| Back to top |
|
 |
Keruskerfuerst
Advocate
Joined: 01 Feb 2006
Posts: 2289
Location: near Augsburg, Germany
|
| Posted: Wed Jun 27, 2018 5:43 pm Post subject: |
|
|
| I think, you should use a bigger SD card (>= 64 GB) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Alternative Architectures
