| View previous topic :: View next topic |
| Author |
Message |
chrisk2305
Tux's lil' helper
Joined: 05 Sep 2007
Posts: 110
|
 Posted: Fri Jun 22, 2018 9:02 am Post subject: Kernel hangs when Intel SSD DC P3520 is installed |
 |
|
Hi,
I have been struggling this whole week to get my system to run with a newly bought Intel SSD DC P3520 (only as Data disk).
I have an issues booting the Linux Kernel (4.14.50) when a Intel SSD DC P3520 is installed (in the x4 PCH Slot 7 - also tried the slots connected to the CPU directly - no difference). Mainboard is a Supermicro X11SSA-F. I also have an Intel SSD 6000p M.2 500gb as boot drive that works flawlessly.
During hardware initialization (so very early - just a second after the kernel loads) the system hangs. No error is shown though.
As soon as I remove the Intel SSD DC P3520 the system can boot fine. Always reproducible. SSD has the latest firmware.
Bios is also the latest on the board (R2.1a).
As the boot drive is also an NVMe disk I don't understand why it hangs. The SSD works fine in Windows (interestingly it shows me the SSD as SDHC in Windows and Kernel also hangs shortly after loading the sdhci driver - but this is maybe just coincidence).
Appreciate your help!
Thanks,
Christian
Edit: SystemRescueCD loads fine (Kernel 4.14.32) |
|
| Back to top |
|
 |
audiodef
Watchman
Joined: 06 Jul 2005
Posts: 6639
Location: The soundosphere
|
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Sat Jun 23, 2018 7:48 pm Post subject: |
|
|
is it always reported as SDHC in every PCI-E port?
are there any options to make it work in some other mode in the BIOS?
_________________
cogito ergo sum |
|
| Back to top |
|
|
Ant P.
Watchman
Joined: 18 Apr 2009
Posts: 6920
|
| Posted: Sun Jun 24, 2018 3:48 am Post subject: |
|
|
| Describe how it hangs, does magic sysrq still work to reboot the machine? Could be a missing firmware file - sysresccd's dmesg would show it in that case. |
|
| Back to top |
|
|
P.Kosunen
Guru
Joined: 21 Nov 2005
Posts: 309
Location: Finland
|
| Posted: Mon Jun 25, 2018 4:11 pm Post subject: |
|
|
| Maybe it messes drive order numbers, have you UUID or device names in bootloader and kernel boot options? |
|
| Back to top |
|
|
Oniryczny
Guru
Joined: 01 Dec 2011
Posts: 419
Location: Poland
|
| Posted: Fri Jun 29, 2018 3:02 pm Post subject: |
|
|
what about NVME in your kernel?
_________________
cogito ergo sum |
|
| Back to top |
|
|
P.Kosunen
Guru
Joined: 21 Nov 2005
Posts: 309
Location: Finland
|
| Posted: Sat Jun 30, 2018 11:30 am Post subject: |
|
|
| Oniryczny wrote: | | what about NVME in your kernel? |
Should be good, 6000p has no Sata models:
| chrisk2305 wrote: | | I also have an Intel SSD 6000p M.2 500gb as boot drive that works flawlessly. |
|
|
| Back to top |
|
|
|
Kernel & Hardware
