| View previous topic :: View next topic |
| Author |
Message |
turtles
Veteran
Joined: 31 Dec 2004
Posts: 1656
|
 Posted: Sun Apr 15, 2018 1:13 am Post subject: Charging USB devices using usbhid driver |
 |
|
Greetings all, I was working on my Gentoo laptop today and my phone was going to die.
With no other chargers near by I plugged it in to my laptop.
And my phone started going nuts constantly notifying me the usb is plugged in then unpluged.
I had this happen before but never looked into it too much.
| Code: |
[Sat Apr 14 16:50:02 2018] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[Sat Apr 14 16:50:02 2018] usb 3-2: New USB device found, idVendor=1004, idProduct=6300
[Sat Apr 14 16:50:02 2018] usb 3-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[Sat Apr 14 16:50:02 2018] usb 3-2: Product: USB Charge Only Interface
[Sat Apr 14 16:50:02 2018] usb 3-2: Manufacturer: LG Electronics Inc.
[Sat Apr 14 16:50:02 2018] usbhid 3-2:1.0: couldn't find an input interrupt endpoint
[Sat Apr 14 16:50:36 2018] usb 3-2: USB disconnect, device number 3
[Sat Apr 14 16:50:37 2018] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[Sat Apr 14 16:50:37 2018] usb 3-2: New USB device found, idVendor=1004, idProduct=6300
[Sat Apr 14 16:50:37 2018] usb 3-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[Sat Apr 14 16:50:37 2018] usb 3-2: Product: USB Charge Only Interface
[Sat Apr 14 16:50:37 2018] usb 3-2: Manufacturer: LG Electronics Inc.
[Sat Apr 14 16:50:37 2018] usbhid 3-2:1.0: couldn't find an input interrupt endpoint
[Sat Apr 14 16:50:39 2018] usb 3-2: USB disconnect, device number 4
[Sat Apr 14 16:50:41 2018] usb 3-2: new high-speed USB device number 5 using xhci_hcd
[Sat Apr 14 16:50:41 2018] usb 3-2: New USB device found, idVendor=1004, idProduct=6300
[Sat Apr 14 16:50:41 2018] usb 3-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[Sat Apr 14 16:50:41 2018] usb 3-2: Product: USB Charge Only Interface
[Sat Apr 14 16:50:41 2018] usb 3-2: Manufacturer: LG Electronics Inc.
[Sat Apr 14 16:50:41 2018] usbhid 3-2:1.0: couldn't find an input interrupt endpoint
[Sat Apr 14 16:51:12 2018] usb 3-2: USB disconnect, device number 5
[Sat Apr 14 16:51:13 2018] usb 3-2: new high-speed USB device number 6 using xhci_hcd
[Sat Apr 14 16:51:13 2018] usb 3-2: New USB device found, idVendor=1004, idProduct=6300
[Sat Apr 14 16:51:13 2018] usb 3-2: New USB device strings: Mfr=1, Product=4, SerialNumber=0
[Sat Apr 14 16:51:13 2018] usb 3-2: Product: USB Charge Only Interface
[Sat Apr 14 16:51:13 2018] usb 3-2: Manufacturer: LG Electronics Inc.
|
I did some digging with
to discover I had plugged the phone into port 3-3 this time.
and RTFM https://www.kernel.org/doc/Documentation/usb/power-management.txt
Android phones ask what you want to do when you plug in to a computer.
they can [1] Just charge or
[2] Sync via MTP
[3] Send images via PTP whatever that is.
[4]or there it the ADB shell for developers.
If I select option 1 just charge, linux hid driver gets triggered.
This driver seems to want to power off the phone if there is no 'activity' in the amount of time listed in this file:
| Code: | | /sys/bus/usb/devices/3-3/power/autosuspend_delay_ms |
| Code: | echo 'on' > /sys/bus/usb/devices/3-3/power/control
echo '-1" > /sys/bus/usb/devices/3-3/power/autosuspend_delay_ms |
This appeared to solve the problem of the phone going nuts.
But it still disconnects/reconnects less often (next I am going to see if I can read what the charging current is)
Has anyone messed around with this and made a udev rule or script or something for charging USB devices?
Or have i overlooked some common configuration?
I wonder why linux is giving the phone a new "device number" every time.
Cheers
_________________
Donate to Gentoo |
|
| Back to top |
|
 |
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5934
|
| Posted: Sun Apr 15, 2018 7:13 am Post subject: |
|
|
| Quote: | | I wonder why linux is giving the phone a new "device number" every time. |
That's normal for USB I'm afraid. That said... Google didn't give me much, but is your usb cable or port damaged? If you can wiggle the cable around and it starts disconnecting, it's probably going bad.
_________________
| Neddyseagoon wrote: | | The problem with leaving is that you can only do it once and it reduces your influence. |
banned from #gentoo since sept 2017 |
|
| Back to top |
|
|
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
| Posted: Sun Apr 15, 2018 8:10 am Post subject: Re: Charging USB devices using usbhid driver |
|
|
| turtles wrote: | Android phones ask what you want to do when you plug in to a computer.
they can [1] Just charge or
[2] Sync via MTP
[3] Send images via PTP whatever that is.
[4]or there it the ADB shell for developers.
|
Nope, it depends on the implementation, mine just emit a little sound when plug-in, i get this in my dmesg, and it is just charging.
| Code: | [88311.517851] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[88311.644620] usb 1-5: New USB device found, idVendor=04e8, idProduct=6860
[88311.644621] usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[88311.644622] usb 1-5: Product: SAMSUNG_Android
[88311.644622] usb 1-5: Manufacturer: SAMSUNG
[88311.660992] cdc_acm 1-5:1.1: ttyACM0: USB ACM device
[88311.661136] usbcore: registered new interface driver cdc_acm
[88311.661137] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Bus 001 Device 005: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP) |
|
|
| Back to top |
|
|
bunder
Bodhisattva
Joined: 10 Apr 2004
Posts: 5934
|
| Posted: Sun Apr 15, 2018 10:21 am Post subject: Re: Charging USB devices using usbhid driver |
|
|
| krinn wrote: | Nope, it depends on the implementation, mine just emit a little sound when plug-in, i get this in my dmesg, and it is just charging.
| Code: | | Bus 001 Device 005: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP) |
|
Don't you get a popup complaining that it can't transfer files? That's what I get on mine after a couple minutes if I leave it in MTP mode. It still charges fine though, albeit at 500mAh. I can't stand how slow that is, so I usually just use my wall charger.
_________________
| Neddyseagoon wrote: | | The problem with leaving is that you can only do it once and it reduces your influence. |
banned from #gentoo since sept 2017 |
|
| Back to top |
|
|
krinn
Watchman
Joined: 02 May 2003
Posts: 7470
|
| Posted: Sun Apr 15, 2018 10:39 am Post subject: Re: Charging USB devices using usbhid driver |
|
|
| bunder wrote: | | krinn wrote: | Nope, it depends on the implementation, mine just emit a little sound when plug-in, i get this in my dmesg, and it is just charging.
| Code: | | Bus 001 Device 005: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP) |
|
Don't you get a popup complaining that it can't transfer files? |
No, the phone gets turn on, a little bip sound, usb icon appears, and charging status change, except that, nothing
for info: model is SM-G318H, android 4.4.4 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
