| View previous topic :: View next topic |
| Author |
Message |
Algori
n00b
Joined: 02 Jan 2018
Posts: 41
Location: Leipzig
|
 Posted: Sun Feb 25, 2018 10:56 am Post subject: problem doing emerge |
 |
|
Hello dear Gentoocom,
i chose gentoo because i want to learn everything about linux for the first time,
I'm tired of amazonapps, and a garbage, at z.b. ubuntu,
At first, however, I am at the very beginning!
fter I created a livecd stick, I started. the kernel itself configured, everything made so far, days needed, had tens of details to find to read, etc. I had a lot of trouble to understand everything.
I build the kernel without initframs.
then finally arrived at grub trail, but it remained stuck at grub loading.
I would like to get along without uefi, efi.
the analysis showed, that i probably set my biosgrub partition with set boot flag at the beginning, so the partionon was no longer unformariert but had an ext2.
So everything again from the beginning.
This time I went to the kernel conf a little rough on the thing, minimalist yet. however, in my current attempt, I have more difficulties with emerge, and notice, I just have too little idea.
so hello dear community again!
First question:
USEflags
I've read the USEflags make everything more individual, you can even invent your own, wow!
somehow I still handle the flags indiscriminately. if emerge does not work out, I usually put in the short term what they want me to do, in my last attempt it was often enough to just add a separately mentioned one.
is that the kernel conf? that now with the USEflags everything does not work as easy as on my first try.
I would rather make everything new again and the kernel with make.nconf z.b. try to optimize again?
and then handle the flags with less concern?
second question:
how can i solve this problem? i install some things i will need,
but some failed sys-fs/e2fsprogs, wpa_supplicant, grub, several things have equal output,
and i tryed a lot, but i am stuck in.
| Code: |
* ERROR: sys-boot/grub-2.02::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-boot/grub-2.02::gentoo'`
,
* the complete build log and the output of `emerge -pqv '=sys-boot/grub-2.02::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-boot/grub-2.02/temp/build.
log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-boot/grub-2.02/temp/e
nvironment'.
* Working directory: '/var/tmp/portage/sys-boot/grub-2.02/work/grub-2.02-efi-64'
* S: '/var/tmp/portage/sys-boot/grub-2.02/work/grub-2.02'
>>> Failed to emerge sys-boot/grub-2.02, Log file:
>>> '/var/tmp/portage/sys-boot/grub-2.02/temp/build.log'
* Messages for package sys-boot/grub-2.02:
* ERROR: sys-boot/grub-2.02::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-boot/grub-2.02::gentoo'`
,
* the complete build log and the output of `emerge -pqv '=sys-boot/grub-2.02::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-boot/grub-2.02/temp/build.
log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-boot/grub-2.02/temp/e
nvironment'.
* Working directory: '/var/tmp/portage/sys-boot/grub-2.02/work/grub-2.02-efi-64'
* S: '/var/tmp/portage/sys-boot/grub-2.02/work/grub-2.02'
|
than
| Code: |
(chroot) livecd /usr/src/linux # emerge --info sys-boot/grub
Portage 2.3.19 (python 3.5.4-final-0, default/linux/amd64/17.0/desktop, gcc-6.4.0, glibc
-2.25-r9, 4.5.2-aufs-r1 x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-4.5.2-aufs-r1-x86_64-Intel-R-_Pentium-R-_3558U_@_1.70GHz-with-gentoo
-2.4.1
KiB Mem: 3955156 total, 100844 free
KiB Swap: 2929660 total, 2448300 free
Timestamp of repository gentoo: Sat, 24 Feb 2018 23:30:01 +0000
Head commit of repository gentoo: a0350c5f4cfe39c213be4e57b576f2ff22671cb8
sh bash 4.4_p12
ld GNU ld (Gentoo 2.29.1 p3) 2.29.1
app-shells/bash: 4.4_p12::gentoo
dev-lang/perl: 5.24.3::gentoo
dev-lang/python: 2.7.14-r1::gentoo, 3.5.4-r1::gentoo
dev-util/pkgconfig: 0.29.2::gentoo
sys-apps/baselayout: 2.4.1-r2::gentoo
sys-apps/openrc: 0.34.11::gentoo
sys-apps/sandbox: 2.12::gentoo
sys-devel/autoconf: 2.69-r4::gentoo
sys-devel/automake: 1.15.1-r1::gentoo
sys-devel/binutils: 2.29.1-r1::gentoo
sys-devel/gcc: 6.4.0-r1::gentoo
sys-devel/gcc-config: 1.8-r1::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.13::gentoo (virtual/os-headers)
sys-libs/glibc: 2.25-r9::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
sync-rsync-extra-opts:
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=haswell -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/lib64/libreoffice/program/sofficerc /usr/share/config /usr/sha
re/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release
/etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=haswell -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks f
ixlafiles merge-sync multilib-strict news parallel-fetch preserve-libs protect-owned san
dbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpri
v usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://ftp.uni-erlangen.de/pub/mirrors/gento
o ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo rsync://rsync.de.gentoo.org/gentoo-port
age/"
LANG="de_DE.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --
compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=
/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac accessibility acl acpi alsa alsa_pcm_plugins_adpcm alsa_pcm_plugins_alaw
alsa_pcm_plugins_asym alsa_pcm_plugins_copy alsa_pcm_plugins_dmix alsa_pcm_plugins_dshar
e alsa_pcm_plugins_dsnoop alsa_pcm_plugins_empty alsa_pcm_plugins_extplug alsa_pcm_plugi
ns_file alsa_pcm_plugins_hooks alsa_pcm_plugins_iec958 alsa_pcm_plugins_ioplug alsa_pcm_
plugins_ladspa alsa_pcm_plugins_lfloat alsa_pcm_plugins_linear alsa_pcm_plugins_meter al
sa_pcm_plugins_mmap_emul alsa_pcm_plugins_mulaw alsa_pcm_plugins_multi alsa_pcm_plugins_
null alsa_pcm_plugins_plug alsa_pcm_plugins_rate alsa_pcm_plugins_route alsa_pcm_plugins
_share alsa_pcm_plugins_shm alsa_pcm_plugins_softvol amd64 berkdb bindist bluetooth bran
ding build bzip2 cairo cdda cdr cli consolekit cracklib crypt cups curl cxx dbus declara
tive dri dts dvd dvdr emboss encode exif fam fbcon fbcondecor firefox flac fortran gdbm
gif gimp glamor gnutls gpm gstreamer gtk gtk3 iconv ipv6 jpeg kdbus kde kipi lcms ldap l
ibnotify libressl livecd loop-aes mad minimal mmx mmxext mng modules mp3 mp4 mpeg multil
ib ncurses networkmanager nls nouveau nptl nptlonly ogg opengl openmp openssl pam pango
pax_kernel pcre pdf phonon plasma png policykit portaudio ppds qml qt3support qt4 qt5 re
adline sasl sdl seccomp session socks5 spell sse sse2 ssl startup-notification static-li
bs svg syslog tcpd tiff truetype udev udisks unicode upower usb vdpau vorbis widgets wxw
idgets x264 xattr xcb xcomposite xinerama xml xscreensaver xv xvid zlib" ABI_X86="64" AL
SA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens13
71 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx v
ia82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions
alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm aut
hz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid da
v dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter header
s include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif s
peling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flo
w plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface
irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc"
GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync it
rax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytr
aq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput keyboard mouse
" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb n
curses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLE
MENTATION="libreoffice" PHP_TARGETS="php5-6 php7-0" POSTGRES_TARGETS="postgres9_5" PYTHO
N_SINGLE_TARGET="python3_5" PYTHON_TARGETS="python2_7 python3_5" RUBY_TARGETS="ruby22 ru
by23" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy
v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip
fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos accou
nt"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS,
MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSY
NC_EXTRA_OPTS
|
and
| Code: |
(chroot) livecd /usr/src/linux # emerge -pqv sys-boot/grub
[ebuild N ] sys-boot/grub-2.02 USE="fonts nls sdl themes truetype -debug -device-ma
pper -doc -efiemu (-libzfs) -mount -multislot -static {-test}" GRUB_PLATFORMS="efi-64 pc
-coreboot -efi-32 -emu -ieee1275 -loongson -multiboot -qemu -qemu-mips -uboot -xen -xen
-32"
|
that was it if i try to emerge grub, sys-fs/e2fsprogs output is similiar.
and some of other emerge like wpa set this problem:
| Code: |
(chroot) livecd /usr/src/linux # emerge -1 --ask net-wireless/wpa_supplicant
These are the packages that would be merged, in order:
Calculating dependencies... done!
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
sys-libs/zlib:0
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
(sys-libs/zlib-1.2.11-r1:0/1::gentoo, ebuild scheduled for merge) pulled in by
>=sys-libs/zlib-1.2.8-r1[static-libs(+)?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-
)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_
s390_32(-)?,abi_s390_64(-)?] required by (dev-libs/openssl-1.0.2n:0/0::gentoo, ebuild sc
heduled for merge)
!!! Enabling --newuse and --update might solve this conflict.
!!! If not, it might help emerge to give a more specific suggestion.
!!! The ebuild selected to satisfy "app-text/mupdf" has unmet requirements.
- app-text/mupdf-1.11-r1::gentoo USE="X curl libressl opengl openssl static-libs -javasc
ript -static -vanilla" ABI_X86="(64)"
The following REQUIRED_USE flag constraints are unsatisfied:
opengl? ( !static-libs )
The above constraints are a subset of the following complete expression:
opengl? ( X !static !static-libs )
(dependency required by "net-print/cups-filters-1.17.9::gentoo[pdf]" [ebuild])
(dependency required by "net-print/cups-2.1.4::gentoo" [ebuild])
(dependency required by "x11-libs/gtk+-3.22.19::gentoo[cups]" [ebuild])
(dependency required by "dev-qt/qtgui-5.7.1-r1::gentoo[gtk]" [ebuild])
(dependency required by "dev-util/cmake-3.9.6::gentoo[qt5]" [ebuild])
(dependency required by "sys-devel/llvm-5.0.1::gentoo" [ebuild])
(dependency required by "media-libs/mesa-17.2.8::gentoo[video_cards_radeon,video_cards_r
adeonsi,-opencl,llvm,-video_cards_r600]" [ebuild])
(dependency required by "media-libs/libepoxy-1.4.2::gentoo" [ebuild])
|
thank you for your help!
truly yours
algori |
|
| Back to top |
|
 |
benchaney
n00b
Joined: 28 Dec 2017
Posts: 30
|
| Posted: Sun Feb 25, 2018 7:03 pm Post subject: |
|
|
HI algori,
Welcome to gentoo.
The first error you posted is just informing you that the compilation failed. We would need the actual build log in order to help you.
| Code: | * The complete build log is located at '/var/tmp/portage/sys-boot/grub-2.02/temp/build.
log'. |
The second error is telling you that you cannot have both the opengl and static-libs use flags sets for app-text/mupdf. Most likely you need opengl, so the best way to solve this would probably be to disable static-libs for mupdf unless you explicitly need them (if you don't know, you probably don't).
You can do this by running:
echo "app-text/mupdf -static-libs" > /etc/portage/package.use/mupdf
Then try the command that failed again. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Sun Feb 25, 2018 7:39 pm Post subject: |
|
|
Algori,
You have gone a bit overboard with USE flags.
Until your system boot on its own, choose the profile you want with and do not do any USE flag fine tuning at all.
This may lead to some extra rebuilds but its safe.
When you change USE flags and portage can't solve the dependencies, you will know why.
Build on what you know works.
Some of the USE flags you have in make.conf should never be used system wide.
bindist libressl livecd minimal pax_kernel static-libs to name a few.
There are others too.
bindist is to build a system that you can distribute in binary form. If you will do that, leave in on.
libressl is broken meanwhile
livecd is for building the Gentoo liveCD.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Algori
n00b
Joined: 02 Jan 2018
Posts: 41
Location: Leipzig
|
| Posted: Thu Mar 01, 2018 1:07 pm Post subject: |
|
|
Hello again,
like i mentioned,
i did everything before this new try, but failed by doing set boot flag on.
anyway i did the kernelconfig with much more love before, more details, more time, what ever, this time, i just set the nessesary drivers and stuff.
maybe i should conf the kernel again?
i set profile
| Code: | (chroot) livecd /usr/src/linux # eselect profile list
Available profile symlink targets:
[1] default/linux/amd64/13.0 (stable)
[2] default/linux/amd64/13.0/selinux (dev)
[3] default/linux/amd64/13.0/desktop (stable)
[4] default/linux/amd64/13.0/desktop/gnome (stable)
[5] default/linux/amd64/13.0/desktop/gnome/systemd (stable)
[6] default/linux/amd64/13.0/desktop/plasma (stable)
[7] default/linux/amd64/13.0/desktop/plasma/systemd (stable)
[8] default/linux/amd64/13.0/developer (stable)
[9] default/linux/amd64/13.0/no-multilib (stable)
[10] default/linux/amd64/13.0/systemd (stable)
[11] default/linux/amd64/13.0/x32 (dev)
[12] default/linux/amd64/17.0 (stable)
[13] default/linux/amd64/17.0/selinux (dev)
[14] default/linux/amd64/17.0/hardened (stable)
[15] default/linux/amd64/17.0/hardened/selinux (dev)
[16] default/linux/amd64/17.0/desktop (stable) *
[17] default/linux/amd64/17.0/desktop/gnome (stable)
[18] default/linux/amd64/17.0/desktop/gnome/systemd (stable)
[19] default/linux/amd64/17.0/desktop/plasma (stable)
[20] default/linux/amd64/17.0/desktop/plasma/systemd (stable)
[21] default/linux/amd64/17.0/developer (stable)
[22] default/linux/amd64/17.0/no-multilib (stable)
[23] default/linux/amd64/17.0/no-multilib/hardened (stable)
[24] default/linux/amd64/17.0/no-multilib/hardened/selinux (dev)
[25] default/linux/amd64/17.0/systemd (stable)
[26] default/linux/amd64/17.0/x32 (dev)
|
because i do not want gnome or plasma, this will work, right?
i get always confused by graphical desktopenviroments, it does not seem to be overviewed, for me.
i tryed the same emerge, by testing a lot, sure i did set -static-libs for example too, now i did it with your echo input as well, and i learn some about, because now i know the pin pong between local and global useflag, a litte.
these useflags i`ve got them by
and some of these you mentioned, i just put them into, because i try to emerge for example sudo, i was mentioned, i did it, and it works. now i set "-" before, thank you.
i should find more literature about, i start to read the whole portage side.
aright
i tried, but it fails again,
| Code: | make[1]: Entering directory '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
./util/subst -f ./util/subst.conf ./lib/dirpaths.h.in lib/dirpaths.h
make[1]: *** [Makefile:265: lib/dirpaths.h] Illegal instruction
make[1]: Leaving directory '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
make: *** [Makefile:344: subs] Error 2
* ERROR: sys-fs/e2fsprogs-1.43.6::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/e2fsprogs-1.43.6::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/e2fsprogs-1.43.6::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
* S: '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
>>> Failed to emerge sys-fs/e2fsprogs-1.43.6, Log file:
>>> '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/temp/build.log'
* Messages for package sys-fs/e2fsprogs-1.43.6:
* ERROR: sys-fs/e2fsprogs-1.43.6::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-fs/e2fsprogs-1.43.6::gentoo'`,
* the complete build log and the output of `emerge -pqv '=sys-fs/e2fsprogs-1.43.6::gentoo'`.
* The complete build log is located at '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/temp/environment'.
* Working directory: '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
* S: '/var/tmp/portage/sys-fs/e2fsprogs-1.43.6/work/e2fsprogs-1.43.6'
|
and
| Code: |
(chroot) livecd /usr/src/linux # emerge -1 --ask net-wireless/wpa_supplicant
These are the packages that would be merged, in order:
Calculating dependencies... done!
[nomerge ] net-wireless/wpa_supplicant-2.6-r3::gentoo USE="dbus gnutls hs2-0 qt5 readline ssl -ap -eap-sim -fasteap -libressl -p2p (-ps3) (-selinux) -smartcard -tdls -uncommon-eap-types (-wimax) -wps"
[nomerge ] dev-qt/qtwidgets-5.7.1:5/5.7::gentoo USE="png xcb -debug (-gles2) {-test}"
[nomerge ] dev-qt/qtgui-5.7.1-r1:5/5.7::gentoo USE="accessibility dbus egl gif gtk jpeg libinput png udev xcb -debug -eglfs -evdev (-gles2) -ibus {-test} -tslib -tuio"
[nomerge ] x11-libs/gtk+-3.22.19:3::gentoo USE="X cups introspection xinerama (-aqua) -broadway -cloudprint -colord -examples {-test} -vim-syntax -wayland" ABI_X86="(64) -32 (-x32)"
[nomerge ] net-print/cups-2.1.4::gentoo USE="X acl dbus pam ssl static-libs threads usb -debug -java -kerberos -lprng-compat -python (-selinux) -systemd -xinetd -zeroconf" ABI_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7"
[ebuild N ] net-print/cups-filters-1.17.9::gentoo USE="dbus foomatic jpeg ldap pdf png postscript static-libs tiff -ipp_autosetup -pclm -perl {-test} -zeroconf" 1.420 KiB
[ebuild N ] app-text/ghostscript-gpl-9.21::gentoo USE="X cups dbus gtk static-libs tiff unicode" L10N="-de -ja -ko -zh-CN -zh-TW" 28.488 KiB
[ebuild N ] x11-themes/adwaita-icon-theme-3.24.0::gentoo USE="branding" 20.262 KiB
[ebuild N ] x11-libs/gtk+-3.22.19:3::gentoo USE="X cups introspection xinerama (-aqua) -broadway -cloudprint -colord -examples {-test} -vim-syntax -wayland" ABI_X86="(64) -32 (-x32)" 18.400 KiB
[ebuild N ] net-wireless/wpa_supplicant-2.6-r3::gentoo USE="dbus gnutls hs2-0 qt5 readline ssl -ap -eap-sim -fasteap -libressl -p2p (-ps3) (-selinux) -smartcard -tdls -uncommon-eap-types (-wimax) -wps" 2.689 KiB
[nomerge ] net-print/cups-filters-1.17.9::gentoo USE="dbus foomatic jpeg ldap pdf png postscript static-libs tiff -ipp_autosetup -pclm -perl {-test} -zeroconf"
[ebuild N ] app-text/mupdf-1.11-r1:0/1.11::gentoo USE="X curl opengl openssl -javascript -libressl -static -static-libs -vanilla" 39.215 KiB
[nomerge ] x11-themes/adwaita-icon-theme-3.24.0::gentoo USE="branding"
[ebuild N ] gnome-base/librsvg-2.40.18:2::gentoo USE="introspection -tools -vala" ABI_X86="(64) -32 (-x32)" 561 KiB
[ebuild N ] x11-libs/pango-1.40.14::gentoo USE="X introspection {-test}" ABI_X86="(64) -32 (-x32)" 839 KiB
[ebuild N ] media-libs/harfbuzz-1.7.2:0/0.9.18::gentoo USE="cairo glib graphite introspection static-libs truetype -debug -fontconfig -icu {-test}" ABI_X86="(64) -32 (-x32)" 1.669 KiB
[ebuild N ] media-gfx/graphite2-1.3.10::gentoo USE="-perl {-test}" ABI_X86="(64) -32 (-x32)" 3.799 KiB
[nomerge ] app-text/mupdf-1.11-r1:0/1.11::gentoo USE="X curl opengl openssl -javascript -libressl -static -static-libs -vanilla"
[ebuild N ] media-libs/glfw-3.2.1::gentoo USE="-examples -wayland" 640 KiB
[nomerge ] app-text/ghostscript-gpl-9.21::gentoo USE="X cups dbus gtk static-libs tiff unicode" L10N="-de -ja -ko -zh-CN -zh-TW"
[nomerge ] x11-libs/gtk+-3.22.19:3::gentoo USE="X cups introspection xinerama (-aqua) -broadway -cloudprint -colord -examples {-test} -vim-syntax -wayland" ABI_X86="(64) -32 (-x32)"
[ebuild N ] media-libs/libepoxy-1.4.2::gentoo USE="X {-test}" ABI_X86="(64) -32 (-x32)" 303 KiB
[nomerge ] media-libs/glfw-3.2.1::gentoo USE="-examples -wayland"
[ebuild N ] virtual/opengl-7.0-r1::gentoo ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] media-libs/mesa-17.2.8::gentoo USE="classic dri3 egl gallium gbm llvm nptl vdpau -bindist -d3d9 -debug -gles1 -gles2 -opencl -openmax -osmesa -pax_kernel -pic (-selinux) -unwind -vaapi -valgrind -vulkan -wayland -xa -xvmc" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="intel nouveau radeon radeonsi (-freedreno) -i915 -i965 (-imx) -r100 -r200 -r300 -r600 (-vc4) -virgl (-vivante) -vmware" 10.150 KiB
[ebuild N ] sys-devel/llvm-5.0.1:5::gentoo USE="libffi ncurses -debug -doc -gold -libedit {-test}" ABI_X86="(64) -32 (-x32)" LLVM_TARGETS="AMDGPU BPF NVPTX (X86) -AArch64 -ARM -Hexagon -Lanai -MSP430 -Mips -PowerPC -Sparc -SystemZ -XCore" 22.976 KiB
[nomerge ] net-print/cups-filters-1.17.9::gentoo USE="dbus foomatic jpeg ldap pdf png postscript static-libs tiff -ipp_autosetup -pclm -perl {-test} -zeroconf"
[ebuild N ] app-text/poppler-0.62.0-r1:0/73::gentoo USE="cairo curl cxx introspection jpeg jpeg2k lcms png qt5 tiff utils -cjk -debug -doc -nss" 1.391 KiB
[nomerge ] net-wireless/wpa_supplicant-2.6-r3::gentoo USE="dbus gnutls hs2-0 qt5 readline ssl -ap -eap-sim -fasteap -libressl -p2p (-ps3) (-selinux) -smartcard -tdls -uncommon-eap-types (-wimax) -wps"
[ebuild N ] dev-qt/qtsvg-5.7.1:5/5.7::gentoo USE="-debug {-test}" 1.711 KiB
[nomerge ] app-text/poppler-0.62.0-r1:0/73::gentoo USE="cairo curl cxx introspection jpeg jpeg2k lcms png qt5 tiff utils -cjk -debug -doc -nss"
[ebuild N ] media-libs/openjpeg-2.3.0:2/7::gentoo USE="static-libs -doc {-test}" ABI_X86="(64) -32 (-x32)" 2.156 KiB
[ebuild N ] dev-util/cmake-3.9.6::gentoo USE="ncurses qt5 -doc -emacs -server -system-jsoncpp {-test}" 7.525 KiB
[ebuild N ] dev-qt/qtwidgets-5.7.1:5/5.7::gentoo USE="png xcb -debug (-gles2) {-test}" 43.939 KiB
[ebuild N ] dev-qt/qtgui-5.7.1-r1:5/5.7::gentoo USE="accessibility dbus egl gif gtk jpeg libinput png udev xcb -debug -eglfs -evdev (-gles2) -ibus {-test} -tslib -tuio" 0 KiB
[ebuild N ] x11-libs/cairo-1.14.12::gentoo USE="X glib opengl static-libs svg xcb (-aqua) -debug (-gles2) -valgrind" ABI_X86="(64) -32 (-x32)" 35.403 KiB
Total: 22 packages (22 new), Size of downloads: 243.527 KiB
* Error: circular dependencies:
(dev-util/cmake-3.9.6:0/0::gentoo, ebuild scheduled for merge) depends on
(dev-qt/qtgui-5.7.1-r1:5/5.7::gentoo, ebuild scheduled for merge) (buildtime)
(media-libs/harfbuzz-1.7.2:0/0.9.18::gentoo, ebuild scheduled for merge) (buildtime_slot_op)
(media-gfx/graphite2-1.3.10:0/0::gentoo, ebuild scheduled for merge) (buildtime_slot_op)
(dev-util/cmake-3.9.6:0/0::gentoo, ebuild scheduled for merge) (buildtime)
It might be possible to break this cycle
by applying any of the following changes:
- dev-util/cmake-3.9.6 (Change USE: -qt5)
- media-libs/harfbuzz-1.7.2 (Change USE: -graphite)
Note that this change can be reverted, once the package has been installed.
Note that the dependency graph contains a lot of cycles.
Several changes might be required to resolve all cycles.
Temporarily changing some use flag for all packages might be the better option.
!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:
dev-libs/openssl:0
(dev-libs/openssl-1.0.2n:0/0::gentoo, installed) pulled in by
>=dev-libs/openssl-1.0.1:0/0=[bindist] required by (net-misc/openssh-7.5_p1-r4:0/0::gentoo, installed)
^^^^^^^
>=dev-libs/openssl-1.0.1:0=[bindist=] required by (net-misc/openssh-7.5_p1-r4:0/0::gentoo, installed)
^^^^^^^^
(dev-libs/openssl-1.0.2n:0/0::gentoo, ebuild scheduled for merge) pulled in by
dev-libs/openssl:0=[static-libs?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?, abi_s390_32(-)?,abi_s390_64(-)?] required by (net-misc/curl-7.58.0:0/0::gentoo, ebuild scheduled for merge)
^^^^^^^^^^^^
It might be possible to solve this slot collision
by applying all of the following changes:
- dev-libs/openssl-1.0.2n (Change USE: +bindist)
|
really i do not have this problems before, and if i change some, it works, or its worse, but of course i have to learn much more details, but i am glad, if you maybe draw my attention to the mainpoint.
i am motivated to read everything about, learn what i need to, step by step, point to point, because i defnitly want to handle these, and ive got time and i live for science, little hobbystuff, but i will need this experience for sure.
should i go through all this packages?
btw. now i install x11 first, lets see.
by the way, i maybe have to install ubuntu as a secondthing, to work, while i learn to handle this gentoo haven.
hope this will work without efi, and i am able to cut it out, if i am ready to.
i study mathematics, thats why i am not able to get through all this in less time, but i am hang on, and wont jump away.
truly yours
algori
Mod edit: Long lines split to preserve Forum formatting. — JRG |
|
| Back to top |
|
|
Algori
n00b
Joined: 02 Jan 2018
Posts: 41
Location: Leipzig
|
| Posted: Thu Mar 01, 2018 1:33 pm Post subject: |
|
|
add
| Code: |
make[1]: *** [Makefile:1422: ks_tables.h] Error 132
make[1]: Leaving directory '/var/tmp/portage/x11-libs/libX11-1.6.5/work/libX11-1.6.5-abi_x86_64.amd64/src'
make: *** [Makefile:519: all-recursive] Error 1
* ERROR: x11-libs/libX11-1.6.5::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=x11-libs/libX11-1.6.5::gentoo'`,
* the complete build log and the output of `emerge -pqv '=x11-libs/libX11-1.6.5::gentoo'`.
* The complete build log is located at '/var/tmp/portage/x11-libs/libX11-1.6.5/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-libs/libX11-1.6.5/temp/environment'.
* Working directory: '/var/tmp/portage/x11-libs/libX11-1.6.5/work/libX11-1.6.5-abi_x86_64.amd64'
* S: '/var/tmp/portage/x11-libs/libX11-1.6.5/work/libX11-1.6.5'
>>> Failed to emerge x11-libs/libX11-1.6.5, Log file:
>>> '/var/tmp/portage/x11-libs/libX11-1.6.5/temp/build.log'
* Messages for package x11-libs/libX11-1.6.5:
* ERROR: x11-libs/libX11-1.6.5::gentoo failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=x11-libs/libX11-1.6.5::gentoo'`,
* the complete build log and the output of `emerge -pqv '=x11-libs/libX11-1.6.5::gentoo'`.
* The complete build log is located at '/var/tmp/portage/x11-libs/libX11-1.6.5/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-libs/libX11-1.6.5/temp/environment'.
* Working directory: '/var/tmp/portage/x11-libs/libX11-1.6.5/work/libX11-1.6.5-abi_x86_64.amd64'
* S: '/var/tmp/portage/x11-libs/libX11-1.6.5/work/libX11-1.6.5'
* GNU info directory index is up-to-date.
|
thank you for your patience. |
|
| Back to top |
|
|
fedeliallalinea
Administrator
Joined: 08 Mar 2003
Posts: 30915
Location: here
|
| Posted: Thu Mar 01, 2018 1:42 pm Post subject: |
|
|
Remove bindist use flag from your make.conf and rebuild package with emerge -UD @world, that is required only if you distribute binary package.
For e2fsprogs and libX11 you should post build.log with wgetpaste
_________________
Questions are guaranteed in life; Answers aren't. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Installing Gentoo
