| View previous topic :: View next topic |
| Author |
Message |
truekaiser
l33t
Joined: 05 Mar 2004
Posts: 801
|
 Posted: Wed Dec 13, 2017 2:35 am Post subject: Looking to set up gentoo on a pi 3b |
 |
|
Looking to make it a retropi but running gentoo. Anyone have any tips? Kinda confused on which guide to follow.
i would like to use 64bit but would that be good? |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Wed Dec 13, 2017 4:39 pm Post subject: |
|
|
EugeneTheJeep,
If you want the full Gentoo experience, there is Raspberry Pi 3 64 bit Install
There is a new stage3.
It runs Xfce4, that's keyworded ~arm64, and mate but mate is not yet keyworded for arm64 at all.
arm64 on Gentoo is an experimental architecture but most of the things I've tried seem to work.
The edges are pretty rough.
I'm having trouble with arm64 and cross distcc after switching to the /17.x/ profile. I've not got to the bottom of that yet.
For the full Gentoo experience, you will want cross distcc and a USB drive to build on. The SD card is slow.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Sakaki
Guru
Joined: 21 May 2014
Posts: 409
|
| Posted: Thu Dec 14, 2017 10:06 pm Post subject: |
|
|
| NeddySeagoon wrote: | | I'm having trouble with arm64 and cross distcc after switching to the /17.x/ profile. I've not got to the bottom of that yet. |
Off-topic for this thread, apologies, but I've just started trying to get a arm64 17.0 / pie build working too, in preparation for when the 13.0 gets last-rited... any hints would be greatly appreciated ^-^ ... perhaps worth starting a new topic for this?
_________________
Regards,
sakaki |
|
| Back to top |
|
|
truekaiser
l33t
Joined: 05 Mar 2004
Posts: 801
|
| Posted: Tue Jan 02, 2018 1:03 am Post subject: |
|
|
Just an update. Could not get 64bit to work without freezing. got 32bit to work. got most of the software installed to make my own gentoo based emulation machine.. then ran into the brick wall of mupen64.
Claimed to have arm support. official ebuild won't build, neither will the libretro one. No documentation except for inside the make file that mentions arm support, neon extension and hard floating point. but no information to get it to build without failing as it looks for x86 specific stuff. |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54214
Location: 56N 3W
|
| Posted: Tue Jan 02, 2018 12:14 pm Post subject: |
|
|
truekaiser,
Well, its not going to work on arm64. All I did was keyword things in package.accept_keywords/ and shut my eyes. :)
| Code: | Emerging (3 of 13) games-emulation/mupen64plus-core-2.5-r1::gentoo
* mupen64plus-core-src-2.5.tar.gz BLAKE2B SHA512 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking mupen64plus-core-src-2.5.tar.gz to /var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work
>>> Source unpacked in /var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work
>>> Preparing source in /var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work/mupen64plus-core-src-2.5 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work/mupen64plus-core-src-2.5 ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work/mupen64plus-core-src-2.5 ...
make -j2 -C projects/unix UNAME=Linux V=1 CROSS_COMPILE=aarch64-unknown-linux-gnu- CC=aarch64-unknown-linux-gnu-gcc CXX=aarch64-unknown-linux-gnu-g++ PKG_CONFIG=aarch64-unknown-linux-gnu-pkg-config OPTFLAGS= PREFIX=/usr LIBDIR=/usr/lib64 LDCONFIG=: INSTALL_STRIP_FLAG= 'SDL_CFLAGS=-D_REENTRANT -I/usr/include/SDL2' SDL_LDLIBS=-lSDL2 OSD=0 NO_ASM=1 LIRC=0 DEBUGGER=0 NEW_DYNAREC=0 USE_GLES=1 all
make: Entering directory '/var/tmp/portage/games-emulation/mupen64plus-core-2.5-r1/work/mupen64plus-core-src-2.5/projects/unix'
Makefile:127: *** CPU type "aarch64" not supported. Please file bug report at 'http://code.google.com/p/mupen64plus/issues'. Stop.
|
You might have better luck on armv7a but I don't have easy access to one of those.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Tzfardaya
n00b
Joined: 08 Jan 2018
Posts: 1
|
| Posted: Mon Jan 08, 2018 12:13 am Post subject: |
|
|
| NeddySeagoon wrote: |
There is a new stage3.
|
I must be blind, I can't find a new stage 3... newest I can find is the 20161219 one... |
|
| Back to top |
|
|
pjp
Administrator
Joined: 16 Apr 2002
Posts: 20067
|
| Posted: Mon Jan 08, 2018 4:05 am Post subject: |
|
|
| Tzfardaya wrote: | | I must be blind, I can't find a new stage 3... newest I can find is the 20161219 one... |
The guide NeddySeagoon linked to references distfiles.gentoo.org which points to a stage3 from 2017.12.04
_________________
Quis separabit? Quo animo? |
|
| Back to top |
|
|
|
Gentoo on ARM
