Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Yet Another Gentoo GNU/Linux Installation Guide
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
gary_uk
n00b
n00b


Joined: 18 Nov 2014
Posts: 10

PostPosted: Thu Nov 09, 2017 2:36 pm    Post subject: Yet Another Gentoo GNU/Linux Installation Guide Reply with quote

Over the past 3 years, I've greatly benefited from Gentoo GNU/Linux but I feel rather guilty that I haven't given anything back to the community. So in addition to apologising, I would like to contribute Yet Another Gentoo GNU/Linux Installation Guide ( http://www.deepnodal.net/yagglig.pdf ). It's not much and perhaps replicates other people's work. I hope if it's not useful it might at least be entertaining!
Back to top
View user's profile Send private message
Whalehunter
n00b
n00b


Joined: 17 Oct 2017
Posts: 3
Location: Delft, Netherlands

PostPosted: Mon Nov 20, 2017 10:01 pm    Post subject: Reply with quote

I appreciate the guide man, first install, first success.
Installing plasma was the part which took longest (3 hrs).

Except for the misspelled words and weird sentences, I think it's a really good guide. :D
Back to top
View user's profile Send private message
gary_uk
n00b
n00b


Joined: 18 Nov 2014
Posts: 10

PostPosted: Wed Nov 22, 2017 10:36 am    Post subject: Reply with quote

Thanks for your kind feedback :D - at least the guide was useful to one other person!
Back to top
View user's profile Send private message
Zucca
Moderator
Moderator


Joined: 14 Jun 2007
Posts: 3339
Location: Rasi, Finland

PostPosted: Wed Nov 22, 2017 3:11 pm    Post subject: Reply with quote

With the writing enthusiasm in you, please consider contributing to the wiki.
:!:
_________________
..: Zucca :..
Gentoo IRC channels reside on Libera.Chat.
--
Quote:
I am NaN! I am a man!
Back to top
View user's profile Send private message
gary_uk
n00b
n00b


Joined: 18 Nov 2014
Posts: 10

PostPosted: Thu Nov 23, 2017 12:18 pm    Post subject: Reply with quote

Thanks for the suggestion. I never knew this wiki existed! 8O
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7470

PostPosted: Thu Nov 23, 2017 1:02 pm    Post subject: Reply with quote

Just try to use "simple but examples", things like that are bad examples:
Quote:
route add default gw 192.168.1.255

I think they removed reserved address in some RFC updates, but using broadcast address of class C network as gateway is certainly something not to do, even if it would be allow now (as this could lead to trouble).

Following the same logic, this is very confusing :
Quote:
nameserver 192.168.1.245
nameserver 192.168.1.254

It's little probable user have two DHCP server at 245 and 254, what is more probable is a user using his router DHCP feature to handle that, which would mean hinting user to use
Quote:
nameserver 192.168.1.255

Just to follow the logic, because i'm against using that address at first.

Examples are made to help user, not to mistake or confuse them.

Quote:
(obviously your numbers will be different)

You can say it :)
Back to top
View user's profile Send private message
gary_uk
n00b
n00b


Joined: 18 Nov 2014
Posts: 10

PostPosted: Thu Nov 23, 2017 1:32 pm    Post subject: Reply with quote

Thanks Krinn. I certainly wasn't expecting detailed feedback.

krinn wrote:
Just try to use "simple but examples", things like that are bad examples:
Quote:
route add default gw 192.168.1.255

I think they removed reserved address in some RFC updates, but using broadcast address of class C network as gateway is certainly something not to do, even if it would be allow now (as this could lead to trouble).
<SNIP>


For the manual TCP/IP configuration I chose these numbers precisely for the reason you identify since they are clearly wrong and will remind the user they need to use something else. If you look at the full quote in context:

Quote:

If you have a DHCP connection, it is possible that the network interface
card will be configured automatically with the correct TCP/IP settings. For
manual TCP/IP configuration, you need to specify the network settings yourself
(obviously your numbers will be different):

Code:

# ifconfig -a
# ifconfig enp7s0 192.168.1.1 netmask 255.255.255.0 up
# route add default gw 192.168.1.255
# vi /etc/resolv.conf



... I think that about covers it especially with the reminder in parenthesis. But as you say examples are made to help users, not to mistake or confuse them. I will bear your concern in mind if a new version ever makes it to the wiki.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum