View previous topic :: View next topic |
Author |
Message |
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Jul 31, 2017 2:06 pm Post subject: emerging app-office/libreoffice |
|
|
Hi everybody.
I'm Jean-Yves from France so sorry if my english is not perfect.
I use gentoo since 6 month , i have read some docs, but sometimes i found it a bit complicated.
Anyway i want to go on with it because i need to progress in programming and i find gentoo interesting.
I synced my system after a while because i was not at home:
then did a :
Code: |
emerge --update --newuse --deep @world
|
which went well relatively well after some unmerge.
But now i can't install app-office/libreoffice:
Code: |
sudo emerge -av app-office/libreoffice
* IMPORTANT: 12 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] dev-libs/libixion-0.11.1:0/0.11::gentoo USE="python -static-libs" PYTHON_SINGLE_TARGET="python3_4 (-python3_5) (-python3_6)" PYTHON_TARGETS="python3_4 (-python3_5) (-python3_6)" 0 KiB
[ebuild N ] dev-libs/libverto-0.2.5-r1::gentoo USE="libev threads -glib -libevent -static-libs -tevent" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] app-text/mythes-1.2.4::gentoo USE="-static-libs" 0 KiB
[ebuild N ] net-libs/neon-0.30.2:0/27::gentoo USE="nls ssl zlib -doc -expat -gnutls -kerberos -libproxy (-libressl) -pkcs11 -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] app-text/libmwaw-0.3.8::gentoo USE="-doc -static-libs" 0 KiB
[ebuild N ] media-libs/libpagemaker-0.0.3-r1::gentoo USE="-debug -doc -tools" 0 KiB
[ebuild N ] app-text/libodfgen-0.1.6::gentoo USE="-doc" 0 KiB
[ebuild N ] net-nds/openldap-2.4.44::gentoo USE="berkdb crypt ipv6 ssl syslog tcpd -cxx -debug -experimental -gnutls -iodbc -kerberos -kinit (-libressl) -minimal -odbc -overlays -perl -samba -sasl (-selinux) -slp -smbkrb5passwd -static-libs" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] dev-cpp/libcmis-0.5.2_pre20160820-r1:0.5::gentoo USE="-man -static-libs {-test}" 0 KiB
[ebuild N ] media-libs/libvisio-0.1.5-r1::gentoo USE="-doc -static-libs {-test} -tools" 0 KiB
[ebuild N ] dev-db/mysql-connector-c++-1.1.6::gentoo USE="-debug -examples -gcov -static-libs" 0 KiB
[ebuild N ] app-text/libetonyek-0.1.6::gentoo USE="-doc -static-libs {-test}" 0 KiB
[ebuild N ] app-text/libabw-0.1.1::gentoo USE="-doc -static-libs" 0 KiB
[ebuild N ] app-text/libwps-0.4.6::gentoo USE="-debug -doc -static-libs -tools" 0 KiB
[ebuild N ] dev-libs/liborcus-0.11.2:0/0.11::gentoo USE="python spreadsheet-model -static-libs -tools" PYTHON_SINGLE_TARGET="python3_4 (-python3_5) (-python3_6)" PYTHON_TARGETS="python3_4 (-python3_5) (-python3_6)" 0 KiB
[ebuild N ] app-text/libwpg-0.3.1:0.3::gentoo USE="-doc -static-libs" 0 KiB
[ebuild N ] dev-libs/rasqal-0.9.32::gentoo USE="crypt mhash pcre -gmp -static-libs {-test} -xml" 0 KiB
[ebuild N ] sci-libs/colamd-2.8.0::gentoo USE="-static-libs" 0 KiB
[ebuild N ] app-crypt/mit-krb5-1.14.2::gentoo USE="keyutils pkinit threads -doc (-libressl) -openldap (-selinux) {-test} -xinetd" ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] sci-mathematics/lpsolve-5.5.2.0::gentoo USE="-static-libs" 0 KiB
[ebuild N ] dev-libs/redland-1.0.16::gentoo USE="berkdb xml -iodbc -mysql -odbc -postgres -sqlite -static-libs" 0 KiB
[ebuild N ] virtual/krb5-0-r1::gentoo ABI_X86="(64) -32 (-x32)" 0 KiB
[ebuild N ] dev-db/postgresql-9.6.3-r1:9.6::gentoo USE="kerberos nls pam python readline server ssl zlib -doc -ldap (-libressl) -perl -pg_legacytimestamp (-selinux) -static-libs -systemd -tcl -threads -uuid -xml" LINGUAS="fr -af -cs -de -en -es -fa -hr -hu -it -ko -nb -pl -pt_BR -ro -ru -sk -sl -sv -tr -zh_CN -zh_TW" PYTHON_SINGLE_TARGET="python3_4 -python2_7 (-python3_5) (-python3_6)" PYTHON_TARGETS="python2_7 python3_4 (-python3_5) (-python3_6)" 0 KiB
[ebuild N ] app-office/libreoffice-5.2.7.2::gentoo USE="branding cups gtk mysql postgres (-aqua) -bluetooth (-coinmp) -collada -dbus -debug -eds (-firebird) -gltf -gnome -googledrive -gstreamer -gtk3 -java -jemalloc -kde (-libressl) -odk -pdfimport -quickstarter (-telepathy) {-test} -vlc" LIBREOFFICE_EXTENSIONS="-nlpsolver -scripting-beanshell -scripting-javascript -wiki-publisher" PYTHON_SINGLE_TARGET="python3_4 -python2_7 (-python3_5)" PYTHON_TARGETS="python2_7 python3_4 (-python3_5)" 0 KiB
Total: 24 packages (24 new), Size of downloads: 0 KiB
Would you like to merge these packages? [Yes/No]
|
The problem is during Boost file config check:
Code: |
checking boost/thread.hpp presence... yes
checking for boost/thread.hpp... yes
checking for the Boost thread library... (cached) yes
checking boost/program_options.hpp usability... yes
checking boost/program_options.hpp presence... yes
checking for boost/program_options.hpp... yes
checking for the Boost program_options library... no
configure: error: cannot find the flags to link with Boost program_options
configure: error: cannot find the flags to link with Boost program_options
|
which hangs because of libixion check
Code: |
[... suite]
!!! Please attach the following file when seeking support:
!!! /tmp/portage/dev-libs/libixion-0.11.1/work/libixion-0.11.1/config.log
* ERROR: dev-libs/libixion-0.11.1::gentoo failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 115: Called src_configure
* environment, line 2985: Called econf '--enable-python' '--disable-static'
* phase-helpers.sh, line 665: Called __helpers_die 'econf failed'
* isolated-functions.sh, line 117: Called die
* The specific snippet of code:
* die "$@"
|
In /tmp/portage/dev-libs/libixion-0.11.1/work/libixion-0.11.1/config.log
Code: |
conftest.cpp:15:21: error: expected identifier before 'sizeof'
static_assert(sizeof(int) <= sizeof(T), "not big enough");
|
I would say that a type is "not big enought" but i do not know what to do or check a this step.
I heard of a problem related to gcc version but not sure that i am in this case.
Unfortunately, not yet familiar to the forum, I did not find how to link the mentionned big log file above instead of copying it,
which i did not do.
Don't hesitate to ask me more informations.
I thank you in advance for your help.
A bientôt! _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
josephg l33t
Joined: 10 Jan 2016 Posts: 783 Location: usually offline
|
Posted: Mon Jul 31, 2017 2:17 pm Post subject: Re: emerging app-office/libreoffice |
|
|
Poum wrote: | Unfortunately, not yet familiar to the forum, I did not find how to link the mentionned big log file above instead of copying it,
which i did not do. |
http://wiki.gentoo.org/wiki/wgetpaste |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30915 Location: here
|
Posted: Mon Jul 31, 2017 2:21 pm Post subject: |
|
|
Read this thread _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Jul 31, 2017 4:15 pm Post subject: |
|
|
Thanks you so much for these advices.
I pasted the /tmp/portage/dev-libs/libixion-0.11.1/work/libixion-0.11.1/config.log content here:
[url]
https://paste.pound-python.org/show/QG5p3zuvWRpVuUOlKvUi/
[/url]
I'll see your link after lunch.
Thank you very very much. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Jul 31, 2017 5:42 pm Post subject: |
|
|
Tanks for this advice:
i re-emerged dev-libs/boost but it dit not help: i'm am getting exactly the same problem. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30915 Location: here
|
Posted: Mon Jul 31, 2017 5:47 pm Post subject: |
|
|
If you changed gcc from 4.9.3 to 5.4.0 run this commad
Code: | # revdep-rebuild --library 'libstdc++.so.6' -- --exclude gcc |
more info here _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Jul 31, 2017 7:39 pm Post subject: |
|
|
I did it and then it hangs at 17th emerge :
Code: |
>>> Emerging (17 of 115) dev-libs/double-conversion-2.0.1::gentoo
* double-conversion-2.0.1.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking double-conversion-2.0.1.tar.gz to /tmp/portage/dev-libs/double-conversion-2.0.1/work
>>> Source unpacked in /tmp/portage/dev-libs/double-conversion-2.0.1/work
>>> Preparing source in /tmp/portage/dev-libs/double-conversion-2.0.1/work/double-conversion-2.0.1 ...
* Applying double-conversion-2.0.1-scons.patch ... [ ok ]
>>> Source prepared.
>>> Configuring source in /tmp/portage/dev-libs/double-conversion-2.0.1/work/double-conversion-2.0.1 ...
>>> Source configured.
>>> Compiling source in /tmp/portage/dev-libs/double-conversion-2.0.1/work/double-conversion-2.0.1 ...
scons -j4 libdouble-conversion.so.1
Import failed. Unable to find SCons files in:
/usr/lib/python-exec/python2.7/../engine
/usr/lib64/python-exec/python2.7/scons-local-2.4.1
/usr/lib64/python-exec/python2.7/scons-local
/usr/local/lib/scons-2.4.1
/usr/lib/scons-2.4.1
/usr/local/lib/python2.7/site-packages/scons-2.4.1
/usr/lib/python2.7/site-packages/scons-2.4.1
/usr/local/lib64/scons-2.4.1
/usr/local/lib/scons
/usr/lib/scons
/usr/local/lib/python2.7/site-packages/scons
/usr/lib/python2.7/site-packages/scons
|
What is strange is that when i run scons -j4 libdouble-conversion.so.1 on the command line , i dont have this error, and scons builds libdouble-convertion but i do not know why it does not when runned throught the emerge process.
The problem is à do not know scons nor emerge enought to know what i could check at this step.
I's seen others topics about scons but they are a bit differents.
Thanks for help. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Hu Moderator
Joined: 06 Mar 2007 Posts: 21633
|
Posted: Tue Aug 01, 2017 12:58 am Post subject: |
|
|
For now, skip over that package and rebuild the other packages indicated by revdep-rebuild. It is unlikely that your SCons problem will be resolved as a side effect, but we know that your C++ libraries need maintenance, so we should try to finish that first. |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Tue Aug 01, 2017 10:29 am Post subject: |
|
|
Thanks to reply.
I did it with a script loop to avoid the whole ebuild process falls down if one package could not emerge: it took most part of the night.
Then i tried to re-installed libixion which is a dependency for app-office/libreoffice and now scons seems to have been pulled out the dependency tree: good!
But i am still getting a config link problem that the .configure script complains it does not found how to link with glib.
You will see his content here:
https://paste.pound-python.org/show/Nk9d2CWhmrQyo2v2Esie/
Thank you very mutch. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Tue Aug 01, 2017 10:44 am Post subject: |
|
|
To precise : we can see the lines :
cannot found -lpthread
and
cannot found -llthead
into the pasted log file.
According to THIS thread i re-emerged dev-libs/boost library before trying to re-emerge libixion but without success.
Code: |
root# eix dev-libs/libixion
* dev-libs/libixion
Available versions: 0.11.1(0/0.11) ~0.12.2(0/0.12) **9999(0/0.13) {debug python static-libs +threads PYTHON_SINGLE_TARGET="python3_4 python3_5 python3_6" PYTHON_TARGETS="python3_4 python3_5 python3_6"}
Homepage: https://gitlab.com/ixion/ixion
Description: General purpose formula parser & interpreter
|
Code: |
equery uses dev-libs/libixion
Legend : U - final flag setting for installation
: I - package is installed with flag
Colors : set, unset
* Found these USE flags for dev-libs/libixion-0.11.1:
U I
+ + python : Add optional support/bindings for the Python language
+ + python_single_target_python3_4 : Build for Python 3.4 only
+ + python_targets_python3_4 : Build with Python 3.4
- - static-libs : Build static versions of dynamic libraries as well
|
Oups: something strange here : last time i did it there where the thread uses.It comes to disappear?
need to diagnose ..... see you soon... _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Tue Aug 01, 2017 10:51 am Post subject: |
|
|
No sorry i am confounding with the dev-libs/boost use flags which thread is well enabled:
Code: |
- - abi_x86_32 : 32-bit (x86) libraries
+ + context : Build and install the Boost.Context (and Boost.Fiber) library and all other Boost libraries that depend on it
- - debug : (Restricted to <dev-libs/boost-1.50.0-r3)
Build and install debug versions of the Boost libraries. These libraries are not used by default, and should not be used unless you're developing against Boost.
- - doc : Install the full API documentation documentation. This takes over 200MB of extra disk space.
- - icu : Enable ICU (Internationalization Components for Unicode) support, using dev-libs/icu
- - mpi : Add MPI (Message Passing Interface) layer to the apps that support it
+ + nls : Build libboost_locale. This library requires compatible C library interfaces, which might not be provided by uClibc or other embedded libraries.
+ + python : Add optional support/bindings for the Python language
+ + python_targets_python2_7 : Build with Python 2.7
+ + python_targets_python3_4 : Build with Python 3.4
- - static-libs : Build static versions of dynamic libraries as well
+ + threads : Build multi-thread-compatible libraries instead of single-threaded only.
- - tools : Build and install the boost tools (bcp, quickbook, inspect, wave)
|
Unfortunately there is still a problem. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
sebB l33t
Joined: 02 Mar 2011 Posts: 806 Location: S.O. France
|
Posted: Tue Aug 01, 2017 11:21 am Post subject: |
|
|
Can you post your emerge --info |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Tue Aug 01, 2017 2:05 pm Post subject: |
|
|
Emerge --info:
Code: |
Portage 2.3.6 (python 2.7.12-final-0, default/linux/amd64/13.0, gcc-5.4.0, glibc-2.23-r4, 4.1.35-gentoo x86_64)
=================================================================
System uname: Linux-4.1.35-gentoo-x86_64-AMD_FX-tm-4300_Quad-Core_Processor-with-gentoo-2.3
KiB Mem: 8136256 total, 3470976 free
Timestamp of repository gentoo: Sun, 30 Jul 2017 19:30:01 +0000
sh bash 4.3_p48-r1
ld GNU ld (Gentoo 2.28 p1.2) 2.28
app-shells/bash: 4.3_p48-r1::gentoo
dev-java/java-config: 2.2.0-r3::gentoo
dev-lang/perl: 5.24.1-r2::gentoo
dev-lang/python: 2.7.12::gentoo, 3.4.5::gentoo
dev-util/cmake: 3.7.2::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.3::gentoo
sys-apps/openrc: 0.26.3::gentoo
sys-apps/sandbox: 2.10-r3::gentoo
sys-devel/autoconf: 2.13::gentoo, 2.69::gentoo
sys-devel/automake: 1.15-r2::gentoo
sys-devel/binutils: 2.28-r2::gentoo
sys-devel/gcc: 5.4.0-r3::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6-r3::gentoo
sys-devel/make: 4.2.1::gentoo
sys-kernel/linux-headers: 4.4::gentoo (virtual/os-headers)
sys-libs/glibc: 2.23-r4::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
brother-overlay
location: /usr/local/overlay/brother-overlay
sync-type: git
sync-uri: git://github.com/stefan-langenmaier/brother-overlay.git
masters: gentoo
my_repo_name
location: /usr/local/portage
masters: gentoo qt
priority: 0
qt
location: /var/lib/layman/qt
masters: gentoo
priority: 50
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php7.0/ext-active/ /etc/php/cgi-php7.0/ext-active/ /etc/php/cli-php7.0/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="fr_FR.UTF-8"
LC_ALL="fr_FR.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X acl alsa amd64 berkdb bzip2 cli cracklib crypt cups cxx dri emerge fortran gdbm geoloc github i18n iconv ipv6 modemmanager modules multilib ncurses nls nptl openmp pam pcre php python readline seccomp session ssl tcpd unicode webkit xattr zlib" ABI_X86="64" ALSA_CARDS="ice1712" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="pc" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="fr fr_FR" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" POSTGRES_TARGETS="postgres9_5" PYTHON_SINGLE_TARGET="python3_4" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby21 ruby22" USERLAND="GNU" VIDEO_CARDS="nouveau" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
| [/code] _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
josephg l33t
Joined: 10 Jan 2016 Posts: 783 Location: usually offline
|
Posted: Tue Aug 01, 2017 6:43 pm Post subject: |
|
|
i am struggling to understand what your current problem is _________________ "Growth for the sake of growth is the ideology of the cancer cell." Edward Abbey |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Thu Aug 03, 2017 10:54 am Post subject: |
|
|
Neither did i.
Thanks very much : you tried.
I realized that the next unstable version of libreoffice builds without problem.
Because it uses the next version libixion and this one builds well.
So i'll not close the subject, until i'll try to debug configure script for current version to see what happens.
As a wrong workaround i installed libreoffice unstable version which happiness does
not break the entire dependencies: only 2 or free libs including libixion.
Next libixion builds without problems.
But i'd like to understand what happens. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
ttrindade n00b
Joined: 26 Dec 2009 Posts: 16 Location: Brazil
|
Posted: Thu Aug 03, 2017 11:35 am Post subject: |
|
|
josephg wrote: | i am struggling to understand what your current problem is |
Hello, I am had the same problem, and resolved with:
$ sudo emerge -ev boost |
|
Back to top |
|
|
josephg l33t
Joined: 10 Jan 2016 Posts: 783 Location: usually offline
|
Posted: Thu Aug 03, 2017 12:43 pm Post subject: |
|
|
on my gentoo x86 stable, i have these built with these flags and all working ok. maybe it might help you try on your system?
Code: | $ emerge -pv libreoffice libixion boost
These are the packages that would be merged:
Calculating dependencies... done!
[ebuild R ] app-office/libreoffice-5.2.7.2::gentoo USE="(-aqua) -bluetooth -branding (-coinmp) -collada -cups -dbus -debug -eds (-firebird) -gltf -gnome -googledrive -gstreamer -gtk -gtk3 -java -jemalloc -kde (-libressl) -mysql -odk -pdfimport -postgres -quickstarter (-telepathy) {-test} -vlc" LIBREOFFICE_EXTENSIONS="-nlpsolver -scripting-beanshell -scripting-javascript -wiki-publisher" PYTHON_SINGLE_TARGET="python2_7 -python3_4 (-python3_5)" PYTHON_TARGETS="python2_7 -python3_4 (-python3_5)" 0 KiB
[ebuild R ] dev-libs/boost-1.62.0-r1:0/1.62.0::gentoo USE="threads -context -debug -doc -icu -mpi -nls -python -static-libs -tools" PYTHON_TARGETS="python2_7 python3_4 (-python3_5)" 0 KiB
[ebuild R ] dev-libs/libixion-0.11.1:0/0.11::gentoo USE="-python -static-libs" PYTHON_SINGLE_TARGET="-python3_4 (-python3_5) (-python3_6)" PYTHON_TARGETS="python3_4 (-python3_5) (-python3_6)" 0 KiB
Total: 3 packages (3 reinstalls), Size of downloads: 0 KiB |
_________________ "Growth for the sake of growth is the ideology of the cancer cell." Edward Abbey |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Sun Nov 12, 2017 12:01 pm Post subject: |
|
|
I could resolve the scons problem, then could install this version which is the current stable on my system: 2.3.5
Code: | dev-util/scons
Available versions: 2.3.5 2.4.1 ~2.5.0 ~2.5.1 [M]~3.0.0 {doc PYTHON_TARGETS="pypy python2_7 python3_5 python3_6"}
Installed versions: 2.3.5(11:53:09 12/11/2017)(-doc PYTHON_TARGETS="python2_7 -pypy")
Homepage: http://www.scons.org/
Description: Extensible Python-based build utility |
version.
It seems that scons python script does not find the library the way it searches it.
So i had to symlink:
Code: | ln -s /usr/lib/python-exec/python-exec2 /usr/lib/scons |
then scons could compile.
[Moderator edit: changed [quote] tags to [code] tags to preserve output layout. -Hu] _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Nov 13, 2017 3:18 pm Post subject: libreoffice/libixion-0.1.1/boost bug still [unresolved]. |
|
|
UP?
https://forums.gentoo.org/viewtopic-t-1066990-highlight-libixion.html
I followed each post on the subject but could not compile libixion.
It still says that it cannot find boost parameters.
Could you help me to understand what sucks?
I did everything that can be done and until now nobody could tell me what i missed.
I realised that with Gentoo there are many problems that remain unresolved.
Unfortunatly all linuxes sucks these years.
They bought me many services but they are becoming fat mamas. _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Mon Nov 13, 2017 3:21 pm Post subject: Up! |
|
|
Thanks for the moderation but who could up me? _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
asturm Developer
Joined: 05 Apr 2007 Posts: 8936
|
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Fri Nov 17, 2017 1:12 pm Post subject: |
|
|
Hello asturm.
Thank you to reply.
My version of gentoolkit:
Code: |
[I] app-portage/gentoolkit
Available versions: 0.3.0.8-r2 0.3.2-r1 0.3.3 [b][u]0.4.0[/u][/b] **9999 {PYTHON_TARGETS="pypy python2_7 python3_4 python3_5 python3_6"}
Installed versions: 0.4.0(12:20:54 11/11/2017)(PYTHON_TARGETS="python2_7 python3_4 -pypy -python3_5 -python3_6")
Homepage: https://wiki.gentoo.org/wiki/Project:Portage-Tools
Description: Collection of administration scripts for Gentoo
|
: 0.4.0 which is higher than 0.3.1
I made
Code: |
revdep-rebuild --library 'libstdc++.so.6' -- --exclude gcc
|
Several times and retried it recently.
Other idea?
Thanks you to try anyway. [/b][/code] _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Fri Nov 17, 2017 1:23 pm Post subject: |
|
|
In addition i print here my version of gcc:
Code: | [ebuild R ] sys-devel/gcc-5.4.0-r3:5.4.0::gentoo USE="cxx fortran gcj (multilib) nls nptl openmp sanitize vtv (-altivec) (-awt) -cilk -debug -doc (-fixed-point) -go -graphite (-hardened) (-jit) (-libssp) -mpx -nopie -nossp -objc -objc++ -objc-gc -pgo -regression-test -vanilla" 0 K
|
I come to make an emerge -f gcc ( who knows) , followed by emerge -v gcc...
let's wait the end of compilation.
Any other ideas? _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
Poum n00b
Joined: 27 Oct 2015 Posts: 38 Location: Onnaing France
|
Posted: Fri Nov 17, 2017 8:54 pm Post subject: |
|
|
Hi.
Code: |
sudo emerge -ev boost
|
did not help neither.
UP? _________________ Didon dina dit-on du dos d'un dodu dindon |
|
Back to top |
|
|
|