View previous topic :: View next topic |
Author |
Message |
bbgermany Veteran
Joined: 21 Feb 2005 Posts: 1844 Location: Oranienburg/Germany
|
Posted: Thu Oct 26, 2017 3:37 pm Post subject: |
|
|
Hi,
bei mir ist es im Runlevel "boot". Dann sollte das dann funktionieren.
MfG. Stefan _________________ Desktop: Ryzen 5 5600G, 32GB, 2TB, RX7600
Notebook: Dell XPS 13 9370, 16GB, 1TB
Server #1: Ryzen 5 Pro 4650G, 64GB, 16.5TB
Server #2: Ryzen 4800H, 32GB, 22TB |
|
Back to top |
|
|
michael_w Guru
Joined: 22 Feb 2006 Posts: 469 Location: 09xxx
|
Posted: Fri Oct 27, 2017 6:18 am Post subject: |
|
|
Hi,
ich hab es jetzt auch in boot (und in default entfernt). Leider wird da nix geladen beim booten. Komischerweise finde ich keine Hinweise für den Versuch in dmesg. Ich boote in den swm und sehe nur kurz die rc-scripte laufen bzw. deren Ergebnis. Kann man da was in logfiles finden?
Ich habe mir das jetzt nochmal angesehen. Beim booten, wenn die rc-scripte laufen, versucht er das Modul zu laden, das scheitert an "no such device" (die gleiche ausgabe erhält man, wenn man als root das modul händisch läd ohne die force angabe). Also ignoriert er das argument (in /etc/conf.d/modules) "force_id=0xd120". Aber wieso? _________________ Linux ryzen 6.6.21-gentoo-dist #1 SMP PREEMPT_DYNAMIC Sun Mar 24 18:32:46 CET 2024 x86_64 AMD Ryzen 7 PRO 4750G with Radeon Graphics AuthenticAMD GNU/Linux |
|
Back to top |
|
|
ChrisJumper Advocate
Joined: 12 Mar 2005 Posts: 2390 Location: Germany
|
Posted: Sat Nov 11, 2017 10:33 pm Post subject: |
|
|
michael_w wrote: |
Ich habe mir das jetzt nochmal angesehen. Beim booten, wenn die rc-scripte laufen, versucht er das Modul zu laden, das scheitert an "no such device" (die gleiche ausgabe erhält man, wenn man als root das modul händisch läd ohne die force angabe). Also ignoriert er das argument (in /etc/conf.d/modules) "force_id=0xd120". Aber wieso? |
Kleines Syntax Problem!
Hast du die Zeile auch so in der /etc/conf.d/modules stehen?
Quote: | modules_nct6775_args="force_id=0xd120" |
Das kleine S muss weg. Weil es ja eine Parameterzeile für ein Kernelmodul ist und die schreiben sich dann im Singular:
Code: | module_nct6775_args="force_id=0xd120" |
Aber den Fehler hab ich auch mal gemacht, da erinnere ich mich noch dran. Auch wenn ich das nicht sofort gesehen hab.
Besser erläutert als im wurde das hier finde ich, aber Achtung da sind noch die Damals und Heute Beispiele bei.
Baselayout 1 to 2 migration - Kernel Modules |
|
Back to top |
|
|
michael_w Guru
Joined: 22 Feb 2006 Posts: 469 Location: 09xxx
|
Posted: Sun Nov 12, 2017 10:40 am Post subject: |
|
|
Hallo Chris,
vielen Dank für den Hinweis, hat geholfen.
Wieder ein Problem weniger.
Vielleicht nochmal im Detail. In /etc/conf.d/modules muss es heissen:
Code: |
modules="nct6775"
module_nct6775_args="force_id=0xd120"
|
D.h., bei dem Modul muss das "s" dran, bei den Argumenten für das Modul dann ohne "s". _________________ Linux ryzen 6.6.21-gentoo-dist #1 SMP PREEMPT_DYNAMIC Sun Mar 24 18:32:46 CET 2024 x86_64 AMD Ryzen 7 PRO 4750G with Radeon Graphics AuthenticAMD GNU/Linux |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|