View previous topic :: View next topic |
Author |
Message |
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
Posted: Wed Nov 01, 2017 4:27 pm Post subject: |
|
|
Hello,
thanks for your reply, i can't copy / paste, i use vmware, but i already gave some screenshots in my previous post. |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30915 Location: here
|
Posted: Wed Nov 01, 2017 6:08 pm Post subject: |
|
|
Code: | Killed (program cc1plus) |
Usually is a out of memory problem. Increase ram of your vm or use a minor value of MAKEOPTS
EDIT: Welcome! _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30915 Location: here
|
Posted: Wed Nov 01, 2017 9:47 pm Post subject: |
|
|
For this, as Jaglover say, you should post full build.log (/var/tmp/portage/dev-libs/libgcrypt-1.8.1/temp/build.log) with wgetpaste. _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Hu Moderator
Joined: 06 Mar 2007 Posts: 21633
|
Posted: Thu Nov 02, 2017 1:24 am Post subject: |
|
|
Drakop wrote: | thanks for your reply, i can't copy / paste, i use vmware, but i already gave some screenshots in my previous post. | Unfortunately, your screen is not tall enough to show the whole log. Please configure your monitor to be at least 1000k pixels tall, then try again. Alternately, and preferably, upload the logs as text so that we can search them. |
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
Posted: Thu Nov 02, 2017 7:53 pm Post subject: Pb |
|
|
Hello,
so i tryed to do what you said but the problem is that when i mount my external HDD it worked but when i want to send my file to the directory it said that my filesystem is read only so i did an 'emerge sys-fs/ntfs3g' but i got an error with a python file and after that i can't use my commands anymore like 'ls, chmod' etc. but i can still use 'cd'.
here is the error :
https://www.hostingpics.net/viewer.php?id=638857Capture1.jpg |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
Posted: Fri Nov 03, 2017 5:21 pm Post subject: Pb |
|
|
Up |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Fri Nov 03, 2017 8:22 pm Post subject: |
|
|
Drakop,
You need to help us to help you as fedeliallalinea posted above. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Sat Nov 04, 2017 8:35 am Post subject: |
|
|
Drakop,
It looks like you have managed to remove a piece of emerge. That's your main problem now.
Run Code: | eselect python list |
It should show at least two python versions. Code: | $ eselect python list
Available Python interpreters, in order of preference:
[1] python3.4
[2] python2.7
[3] python3.5 |
Use eselect python to set a different one as your main python.
Emerge will work with them all.
Run Code: | eselect python list | again to make sure python changed.
Now try emerge again.
This is little more than a guess. Without complete logs you are unlikely to post the actual error in a photo. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
fedeliallalinea Administrator
Joined: 08 Mar 2003 Posts: 30915 Location: here
|
Posted: Sat Nov 04, 2017 10:13 am Post subject: |
|
|
I don't undestand you boot from livecd? You did chroot? _________________ Questions are guaranteed in life; Answers aren't. |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
Posted: Sat Nov 04, 2017 11:00 am Post subject: |
|
|
NeddySeagoon :
All of this is for the first screenshot ? because i had this problem when i did an emerge --ask wgetpaste but i don't get this problem with all the packages.
I don't really understand, all i did was in the Handbook from the Gentoo website :/
fedeliallalinea :
Yeah i boot from livecd but i use Vmware, and yeah i did chroot. |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
Posted: Sat Nov 04, 2017 12:51 pm Post subject: |
|
|
NeddySeagoon :
I tryed what you said but it didn't worked, it gaves me the same error ! |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Sat Nov 04, 2017 2:51 pm Post subject: |
|
|
Drakop,
Your first problem is due to lack of RAM, lack of swap or too high a MAKEOPTS= setting or all three.
fedeliallalinea pointed out the Code: | Killed (program cc1plus) |
That means that there was no RAM for the kernel and it could either panic and halt your system or kill a running task.
It chose to kill one of your C++ compile tasks and keep your system alive.
Its a least worst choice if you like.
Your screen shots are incomplete. As you are using vmware, you can make files available to the host and pastebin from the host.
There are several ways to accomplish that.
What doesshow. Pictures should work for that.
What does show?
Again, the output is small and should fit into a screenshot. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Drakop n00b
Joined: 01 Nov 2017 Posts: 10
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Sun Nov 05, 2017 5:33 pm Post subject: |
|
|
Drakop,
That looks OK. 4G RAM and 512MB swap in fine. 19G of HDD may end up being a bit tight.
Gentoo needs build space and space to store downloaded source code that binary distros don't.
You can keep a desktop install in 19G but you may need to prune things to do it.
As this is a VM, its easy to add more space too.
It looks like you have broken python-exec, which is a wrapper around python programs, including emerge.
Get back into your chroot and try Code: | /usr/lib64/python-exec/python2.7/emerge -av1 dev-lang/python-exec |
The Code: | /usr/lib64/python-exec/python2.7/emerge | runs emerge directly, without the use of the wrapper. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
|