View previous topic :: View next topic |
Author |
Message |
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Sat Oct 28, 2017 2:10 pm Post subject: alsa soundcard dont work [solved] |
|
|
the soundcard is not found (?) I dont hear anything. Please help.
Code: | michi-kiste /usr/src/linux/kernel # lspci | grep -i audio
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
michi-kiste /usr/src/linux/kernel # euse -E alsa
WARNING: Use flag "alsa" is already enabled globally
michi-kiste /usr/src/linux/kernel # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
michi-kiste /usr/src/linux/kernel # aplay --list-devices
aplay: device_list:268: keine Soundkarten gefunden ...
michi-kiste /usr/src/linux/kernel # grep audio /etc/group
audio:x:18:michi
michi-kiste /usr/src/linux/kernel # alsamixer
Fehler beim Öffen des Mixer-Gerätes: Datei oder Verzeichnis nicht gefunden
michi-kiste /usr/src/linux/kernel # alsamixergui |
Code: |
michi-kiste /usr/src/linux/kernel # lspci -nnkv | sed -n '/Audio/,/^$/p'
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller [1002:9902]
Subsystem: ASUSTeK Computer Inc. Trinity HDMI Audio Controller [1043:8526]
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel modules: snd_hda_intel
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 01)
Subsystem: ASUSTeK Computer Inc. FCH Azalia Controller [1043:8576]
Flags: bus master, slow devsel, latency 32, IRQ 5
Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel modules: snd_hda_intel
|
[/code] _________________ www.edv-bildung.de
Last edited by michi-monster on Wed Nov 15, 2017 1:56 pm; edited 1 time in total |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Sat Oct 28, 2017 4:19 pm Post subject: |
|
|
If you lack codec your card won't work, even you have snd_hda_intel properly loaded, see https://forums.gentoo.org/viewtopic-p-6339697.html#6339697
And if your hdmi card is set as default device (or first), you will also have no sound except from it. see https://wiki.gentoo.org/wiki/ALSA#Laptops_with_HDMI_audio_output
If you are in doubt, post your dmesg, head -1 /proc/asound/card?/codec*
and please, set your output in english, i suppose it's german, anyway i don't get anything at it (it mean instead of <command> use <LANC=C command> instead, so its output will be in english) |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Sat Oct 28, 2017 5:34 pm Post subject: |
|
|
Many thanks. I have changed the locale to C
I use an extern speaker with HDMI. It works on Linux Mint.
I think it gives a problem with the module. Please help again: i should activate realtek ?
Code: | michi@michi-kiste /root $ su
Password:
michi-kiste ~ # uname -r
4.12.12-gentoo
michi-kiste ~ # aplay -l
aplay: device_list:268: no soundcards found...
michi-kiste ~ # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
michi-kiste ~ # lsmod | grep "snd"
michi-kiste ~ # ps -C pulseaudio
PID TTY TIME CMD
michi-kiste ~ # cat ~/.asoundrc
cat: /root/.asoundrc: No such file or directory
michi-kiste ~ # cat /proc/asound/cards
cat: /proc/asound/cards: No such file or directory
|
the dmesg
Code: | [ 0.705986] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.706020] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.706054] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.706088] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.706122] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.706155] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.706189] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.706223] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.706365] pnp: PnP ACPI: found 9 devices
[ 0.710950] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.711013] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.711056] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.711090] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.711126] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.711165] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.711200] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.711239] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.711273] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.711309] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.711344] pci 0000:00:15.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.711382] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.711384] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.711384] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.711385] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.711386] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.711387] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.711388] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfed3ffff window]
[ 0.711389] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
[ 0.711391] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
[ 0.711392] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.711392] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df window]
[ 0.711393] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff window]
[ 0.711394] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.711396] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.711397] pci_bus 0000:01: resource 10 [mem 0xe0000000-0xfed3ffff window]
[ 0.711398] pci_bus 0000:01: resource 11 [mem 0xfed45000-0xffffffff window]
[ 0.711399] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.711400] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.711401] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.711402] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.711403] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.711404] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.711446] NET: Registered protocol family 2
[ 0.711598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.711893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.712196] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.712286] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.712385] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.712528] NET: Registered protocol family 1
[ 0.712577] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.002350] PCI: CLS 64 bytes, default 64
[ 1.002384] Trying to unpack rootfs image as initramfs...
[ 1.400690] Freeing initrd memory: 4428K
[ 1.400730] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.400765] software IO TLB [mem 0xa910e000-0xad10e000] (64MB) mapped at [ffff9f246910e000-ffff9f246d10dfff]
[ 1.400828] amd_uncore: AMD NB counters detected
[ 1.401055] LVT offset 0 assigned for vector 0x400
[ 1.401133] perf: AMD IBS detected (0x000000ff)
[ 1.401447] audit: initializing netlink subsys (disabled)
[ 1.401518] audit: type=2000 audit(1509173638.399:1): state=initialized audit_enabled=0 res=1
[ 1.401684] workingset: timestamp_bits=62 max_order=22 bucket_order=0
[ 1.401886] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.401980] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1.402204] ocfs2: Registered cluster interface o2cb
[ 1.402274] OCFS2 User DLM kernel interface loaded
[ 1.402571] gfs2: GFS2 installed
[ 1.402949] NET: Registered protocol family 38
[ 1.402993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.403028] io scheduler noop registered
[ 1.403062] io scheduler deadline registered
[ 1.403099] io scheduler cfq registered (default)
[ 1.403131] io scheduler mq-deadline registered
[ 1.403163] io scheduler kyber registered
[ 1.403601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.424215] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.424720] Linux agpgart interface v0.103
[ 1.427219] brd: module loaded
[ 1.428742] loop: module loaded
[ 1.428853] i8042: PNP: No PS/2 controller found.
[ 1.428959] mousedev: PS/2 mouse device common for all mice
[ 1.429054] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.429182] NET: Registered protocol family 10
[ 1.429370] Segment Routing with IPv6
[ 1.429412] NET: Registered protocol family 17
[ 1.429759] registered taskstats version 1
[ 1.430959] Freeing unused kernel memory: 1048K
[ 1.430993] Write protecting the kernel read-only data: 8192k
[ 1.431203] Freeing unused kernel memory: 112K
[ 1.431596] Freeing unused kernel memory: 148K
[ 1.545233] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.545336] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.545694] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.545754] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.546698] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.546779] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.546861] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.546941] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.547021] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.547100] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.567861] ACPI: bus type USB registered
[ 1.567922] usbcore: registered new interface driver usbfs
[ 1.567969] usbcore: registered new interface driver hub
[ 1.568023] usbcore: registered new device driver usb
[ 1.569242] QUIRK: Enable AMD PLL fix
[ 1.569269] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.569316] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.569558] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 1.569824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.569860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.569898] usb usb1: Product: xHCI Host Controller
[ 1.569932] usb usb1: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
[ 1.569966] usb usb1: SerialNumber: 0000:00:10.0
[ 1.570152] hub 1-0:1.0: USB hub found
[ 1.570212] hub 1-0:1.0: 2 ports detected
[ 1.570386] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.570423] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.571143] libata version 3.00 loaded.
[ 1.571608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.571989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.572037] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.573059] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.573091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.573092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.573094] usb usb2: Product: xHCI Host Controller
[ 1.573095] usb usb2: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
[ 1.573096] usb usb2: SerialNumber: 0000:00:10.0
[ 1.573228] hub 2-0:1.0: USB hub found
[ 1.573251] hub 2-0:1.0: 2 ports detected
[ 1.573425] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.573430] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.574730] ahci 0000:00:11.0: version 3.0
[ 1.575191] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.575243] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[ 1.575750] ehci-pci: EHCI PCI platform driver
[ 1.577149] scsi host0: ahci
[ 1.577306] scsi host1: ahci
[ 1.577433] scsi host2: ahci
[ 1.577563] scsi host3: ahci
[ 1.577688] scsi host4: ahci
[ 1.577877] scsi host5: ahci
[ 1.578050] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 29
[ 1.578100] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 29
[ 1.578147] ata3: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e200 irq 29
[ 1.578197] ata4: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e280 irq 29
[ 1.578246] ata5: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e300 irq 29
[ 1.578297] ata6: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e380 irq 29
[ 1.579342] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.602970] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffa36680041000, 70:8b:cd:a4:7a:93, XID 0c000800 IRQ 30
[ 1.603034] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.633888] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
[ 1.634163] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.634201] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.634235] usb usb3: Product: xHCI Host Controller
[ 1.634268] usb usb3: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
[ 1.634301] usb usb3: SerialNumber: 0000:03:00.0
[ 1.634518] hub 3-0:1.0: USB hub found
[ 1.634572] hub 3-0:1.0: 2 ports detected
[ 1.634723] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.634759] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.634769] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 1.634865] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.634957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.634991] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.635025] usb usb4: Product: xHCI Host Controller
[ 1.635057] usb usb4: Manufacturer: Linux 4.12.12-gentoo xhci-hcd
[ 1.635091] usb usb4: SerialNumber: 0000:03:00.0
[ 1.635239] hub 4-0:1.0: USB hub found
[ 1.635288] hub 4-0:1.0: 2 ports detected
[ 1.635428] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 1.635473] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.635526] ehci-pci 0000:00:12.2: debug port 1
[ 1.635592] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 1.661973] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.662132] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.662170] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.662203] usb usb5: Product: EHCI Host Controller
[ 1.662236] usb usb5: Manufacturer: Linux 4.12.12-gentoo ehci_hcd
[ 1.662270] usb usb5: SerialNumber: 0000:00:12.2
[ 1.662464] hub 5-0:1.0: USB hub found
[ 1.662516] hub 5-0:1.0: 5 ports detected
[ 1.662814] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.662852] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 1.662887] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.662932] ehci-pci 0000:00:13.2: debug port 1
[ 1.662995] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 1.691969] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.692147] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.692186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.692219] usb usb6: Product: EHCI Host Controller
[ 1.692252] usb usb6: Manufacturer: Linux 4.12.12-gentoo ehci_hcd
[ 1.692285] usb usb6: SerialNumber: 0000:00:13.2
[ 1.692490] hub 6-0:1.0: USB hub found
[ 1.692541] hub 6-0:1.0: 5 ports detected
[ 1.693005] ohci-pci: OHCI PCI platform driver
[ 1.693191] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.693231] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 1.693288] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 1.776172] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.776210] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776244] usb usb7: Product: OHCI PCI host controller
[ 1.776277] usb usb7: Manufacturer: Linux 4.12.12-gentoo ohci_hcd
[ 1.776310] usb usb7: SerialNumber: 0000:00:12.0
[ 1.776538] hub 7-0:1.0: USB hub found
[ 1.776592] hub 7-0:1.0: 5 ports detected
[ 1.776908] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.776946] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 1.776998] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 1.846152] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.846189] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.846223] usb usb8: Product: OHCI PCI host controller
[ 1.846256] usb usb8: Manufacturer: Linux 4.12.12-gentoo ohci_hcd
[ 1.846290] usb usb8: SerialNumber: 0000:00:13.0
[ 1.846517] hub 8-0:1.0: USB hub found
[ 1.846570] hub 8-0:1.0: 5 ports detected
[ 1.924489] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.924582] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.924658] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.924713] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.941957] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.011981] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.021944] usb 5-3: new high-speed USB device number 2 using ehci-pci
[ 2.091948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.092023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.092897] ata1.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[ 2.092934] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.093161] ata2.00: ATAPI: DRW-24D5MT, 1.10, max UDMA/133
[ 2.093959] ata1.00: configured for UDMA/133
[ 2.094253] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[ 2.094548] ata2.00: configured for UDMA/133
[ 2.151069] usb 1-1: New USB device found, idVendor=046d, idProduct=c52f
[ 2.151108] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.151141] usb 1-1: Product: USB Receiver
[ 2.151174] usb 1-1: Manufacturer: Logitech
[ 2.173310] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/0003:046D:C52F.0001/input/input0
[ 2.173501] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1/input0
[ 2.182550] usb 3-1: New USB device found, idVendor=03f0, idProduct=c211
[ 2.182588] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.182621] usb 3-1: Product: Deskjet 2540 series
[ 2.182654] usb 3-1: Manufacturer: HP
[ 2.182687] usb 3-1: SerialNumber: CN4CA5F0MT0604
[ 2.187382] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1/0003:046D:C52F.0002/input/input1
[ 2.202176] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.202220] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.202279] sd 0:0:0:0: [sda] Write Protect is off
[ 2.202313] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.202354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.203034] scsi 1:0:0:0: CD-ROM ASUS DRW-24D5MT 1.10 PQ: 0 ANSI: 5
[ 2.225971] usb 5-3: New USB device found, idVendor=05e3, idProduct=0745
[ 2.226020] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.226054] usb 5-3: Product: USB Storage
[ 2.226086] usb 5-3: SerialNumber: 000000000903
[ 2.226560] sr 1:0:0:0: [sr0] scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.226602] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.226780] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.228654] usb-storage 5-3:1.0: USB Mass Storage device detected
[ 2.228802] scsi host6: usb-storage 5-3:1.0
[ 2.228929] usbcore: registered new interface driver usb-storage
[ 2.252148] hid-generic 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-1/input1
[ 2.252232] usbcore: registered new interface driver usbhid
[ 2.252268] usbhid: USB HID core driver
[ 2.261967] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.262540] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.291928] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 2.361926] usb 5-4: new high-speed USB device number 3 using ehci-pci
[ 2.401917] tsc: Refined TSC clocksource calibration: 3890.258 MHz
[ 2.401972] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7026d05ed32, max_idle_ns: 881590578069 ns
[ 2.495061] usb 1-2: New USB device found, idVendor=046a, idProduct=c090
[ 2.495109] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.495143] usb 1-2: Product: Wireless Destop
[ 2.495175] usb 1-2: Manufacturer: cherry
[ 2.510346] input: cherry Wireless Destop as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:046A:C090.0003/input/input2
[ 2.563090] usb 5-4: New USB device found, idVendor=2537, idProduct=1081
[ 2.563128] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.563161] usb 5-4: Product: NS1081
[ 2.563194] usb 5-4: Manufacturer: Norelsys
[ 2.563226] usb 5-4: SerialNumber: 0123456789ABEDA
[ 2.563480] usb-storage 5-4:1.0: USB Mass Storage device detected
[ 2.563627] scsi host7: usb-storage 5-4:1.0
[ 2.572068] hid-generic 0003:046A:C090.0003: input,hidraw2: USB HID v1.11 Keyboard [cherry Wireless Destop] on usb-0000:00:10.0-2/input0
[ 2.603615] input: cherry Wireless Destop as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.1/0003:046A:C090.0004/input/input3
[ 2.672146] hid-generic 0003:046A:C090.0004: input,hiddev97,hidraw3: USB HID v1.11 Mouse [cherry Wireless Destop] on usb-0000:00:10.0-2/input1
[ 2.716112] random: fast init done
[ 3.088401] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.088473] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.268084] scsi: <fdomain> Detection failed (no card)
[ 3.283552] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0903 PQ: 0 ANSI: 6
[ 3.283935] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.287785] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.411935] clocksource: Switched to clocksource tsc
[ 3.463526] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 3.516570] imm: Version 2.05 (for Linux 2.4.0)
[ 3.636592] Fusion MPT base driver 3.04.20
[ 3.636628] Copyright (c) 1999-2008 LSI Corporation
[ 3.640400] Fusion MPT SPI Host driver 3.04.20
[ 3.642883] Fusion MPT FC Host driver 3.04.20
[ 3.645644] Fusion MPT SAS Host driver 3.04.20
[ 3.647958] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 3.650195] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.655935] HP CISS Driver (v 3.6.26)
[ 3.666342] Adaptec aacraid driver 1.2.1[50792]-custom
[ 3.670579] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.670963] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.674629] megasas: 07.701.17.00-rc1
[ 3.678261] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
[ 3.688400] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.14
[ 3.688438] Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
[ 3.693110] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.715293] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.793294] device-mapper: uevent: version 1.0.3
[ 3.793386] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.981741] raid6: sse2x1 gen() 6642 MB/s
[ 4.151729] raid6: sse2x1 xor() 4528 MB/s
[ 4.321718] raid6: sse2x2 gen() 10834 MB/s
[ 4.491705] raid6: sse2x2 xor() 6419 MB/s
[ 4.661695] raid6: sse2x4 gen() 13162 MB/s
[ 4.831682] raid6: sse2x4 xor() 6590 MB/s
[ 4.831725] raid6: using algorithm sse2x4 gen() 13162 MB/s
[ 4.831757] raid6: .... xor() 6590 MB/s, rmw enabled
[ 4.831790] raid6: using ssse3x2 recovery algorithm
[ 4.832062] async_tx: api initialized (async)
[ 4.832226] xor: automatically using best checksumming function avx
[ 4.869399] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4.877540] RPC: Registered named UNIX socket transport module.
[ 4.877577] RPC: Registered udp transport module.
[ 4.877609] RPC: Registered tcp transport module.
[ 4.877642] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.895525] fuse init (API version 7.26)
[ 4.904648] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.904689] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.910687] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 4.914326] sky2: driver version 1.30
[ 4.918010] pps_core: LinuxPPS API ver. 1 registered
[ 4.918048] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.918297] PTP clock support registered
[ 4.951231] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 4.957135] dca service started, version 1.12.1
[ 4.958170] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
[ 4.958207] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 4.960569] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 4.960606] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 4.964547] Loading iSCSI transport class v2.0-870.
[ 5.649721] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.810904] scsi 7:0:0:0: Direct-Access NORELSYS 1081 0 PQ: 0 ANSI: 6
[ 5.811219] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 5.812641] sd 7:0:0:0: [sdc] 30473701 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 5.813706] sd 7:0:0:0: [sdc] Write Protect is off
[ 5.813743] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 5.814723] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.822841] sdc: sdc1
[ 5.826280] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 8.441767] cgroup: cgroup2: unknown option "nsdelegate"
[ 8.964226] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 9.080897] Adding 32359420k swap on /dev/sda5. Priority:-1 extents:1 across:32359420k
[ 10.269750] random: crng init done
[ 11.717040] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.729204] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
[ 11.729208] r8169 0000:04:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
[ 11.753816] r8169 0000:04:00.0 eth0: link down
[ 11.753866] r8169 0000:04:00.0 eth0: link down
[ 11.753868] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.329197] r8169 0000:04:00.0 eth0: link up
[ 14.329207] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.254242] tun: Universal TUN/TAP device driver, 1.6
[12981.046607] r8169 0000:04:00.0 eth0: link down
[12981.046629] r8169 0000:04:00.0 eth0: link down
[12981.046659] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12983.597583] r8169 0000:04:00.0 eth0: link up
[12983.597593] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30893.503286] sdc: sdc1 < sdc5 >
[31247.977618] Netfilter messages via NETLINK v0.30.
[31277.580681] device eth0 entered promiscuous mode
[31420.178515] device eth0 left promiscuous mode
[33405.370866] r8169 0000:04:00.0 eth0: link down
[33405.370926] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[33405.370940] r8169 0000:04:00.0 eth0: link down
[33407.934322] r8169 0000:04:00.0 eth0: link up
[33407.934339] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
_________________ www.edv-bildung.de |
|
Back to top |
|
|
sdoubleyou n00b
Joined: 27 May 2016 Posts: 42
|
Posted: Sat Oct 28, 2017 8:19 pm Post subject: |
|
|
dbus is running? |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Sun Oct 29, 2017 2:21 am Post subject: |
|
|
whatever you think you have done with your kernel was done wrong, you have no snd_hda_intel message in your dmesg, so no snd_hda_intel loaded, it's just missing, if you add it to your kernel, it mean you have fail at rebuilding it or installing the new one.
In my link about codec you have kernel list of options to add in your kernel |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Sun Oct 29, 2017 12:17 pm Post subject: |
|
|
I have compile the kernel. But i dont find snd ...
The images of the kernel config i have load up : http://edv-bildung.de/kernel-konfig
The config at this time:
Code: | michi@michi-kiste ~ $ cat /usr/src/linux/.config | grep SND_HDA
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
|
[/code] Code: |
michi@michi-kiste ~ $ speaker-test
speaker-test 1.1.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:767:(parse_card) cannot find card '0'
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:1246:(snd_func_refer) error evaluating name
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4850:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/pcm/pcm.c:2450:(snd_pcm_open_noupdate) Unknown PCM default
Playback open error: -2,No such file or directory
|
Please help again. I will be happy. _________________ www.edv-bildung.de |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54234 Location: 56N 3W
|
Posted: Sun Oct 29, 2017 1:32 pm Post subject: |
|
|
michi-monster,
What is the output of
What does Code: | ls -l /usr/src/linux/arch/x86/boot/bzImage | show ? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54234 Location: 56N 3W
|
Posted: Sun Oct 29, 2017 1:49 pm Post subject: |
|
|
michi-monster,
What is the output of
What does Code: | ls -l /usr/src/linux/arch/x86/boot/bzImage | show ? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Sun Oct 29, 2017 1:52 pm Post subject: |
|
|
here are the infos:
Code: | michi@michi-kiste ~ $ uname -a
Linux michi-kiste 4.12.12-gentoo #1 SMP Sun Oct 29 11:22:16 CET 2017 x86_64 AMD A8-6600K APU with Radeon(tm) HD Graphics AuthenticAMD GNU/Linux |
Code: |
michi@michi-kiste ~ $ ls -l /usr/src/linux/arch/x86/boot/bzImage
-rw-r--r-- 1 root root 4989904 Oct 29 11:22 /usr/src/linux/arch/x86/boot/bzImage
|
_________________ www.edv-bildung.de |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54234 Location: 56N 3W
|
Posted: Sun Oct 29, 2017 2:04 pm Post subject: |
|
|
michi-monster,
That's good, you are using the kernel you think you are. Notice the time/dates are the same.
Please put your entire .config file onto a pastebin site and post the link. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Mon Oct 30, 2017 1:06 pm Post subject: |
|
|
please post modprobe -vv snd_hda_intel |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Mon Oct 30, 2017 2:30 pm Post subject: |
|
|
Code: | michi-kiste /home/michi # modprobe -vv snd_hda_intel
modprobe: INFO: custom logging function 0x40a030 registered
insmod /lib/modules/4.12.12-gentoo/kernel/sound/core/snd.ko cards_limit=2
insmod /lib/modules/4.12.12-gentoo/kernel/sound/core/snd-timer.ko
insmod /lib/modules/4.12.12-gentoo/kernel/sound/core/snd-pcm.ko
insmod /lib/modules/4.12.12-gentoo/kernel/sound/core/snd-hwdep.ko
insmod /lib/modules/4.12.12-gentoo/kernel/sound/hda/snd-hda-core.ko
insmod /lib/modules/4.12.12-gentoo/kernel/sound/pci/hda/snd-hda-codec.ko
insmod /lib/modules/4.12.12-gentoo/kernel/sound/pci/hda/snd-hda-intel.ko index=1,0
modprobe: INFO: context 0x623260 released
|
_________________ www.edv-bildung.de |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54234 Location: 56N 3W
|
Posted: Mon Oct 30, 2017 4:48 pm Post subject: |
|
|
michi-monster,
What do you have in /dev/snd ?
The index=0,1 will reverse the order of your sound cards, which is what you want.
Are there any errors at the end of dmesg after you did the modprobe ? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Tue Oct 31, 2017 8:16 am Post subject: |
|
|
The infos of sound in dev
Code: |
michi-kiste /dev # ls
autofs hidraw3 megadev0 ram13 sda6 tty11 tty27 tty42 tty58 vcs1 vcsa2
block hwrng mem ram14 sda7 tty12 tty28 tty43 tty59 vcs10 vcsa3
bsg initctl memory_bandwidth ram15 sdb tty13 tty29 tty44 tty6 vcs11 vcsa4
bus input mqueue ram2 sg0 tty14 tty3 tty45 tty60 vcs12 vcsa5
char kmem net ram3 sg1 tty15 tty30 tty46 tty61 vcs2 vcsa6
console kmsg network_latency ram4 sg2 tty16 tty31 tty47 tty62 vcs3 vcsa7
core loop-control network_throughput ram5 shm tty17 tty32 tty48 tty63 vcs4 vcsa8
cpu_dma_latency loop0 null ram6 snapshot tty18 tty33 tty49 tty7 vcs5 vcsa9
dac960_gam loop1 port ram7 snd tty19 tty34 tty5 tty8 vcs6 vga_arbiter
disk loop2 psaux ram8 sr0 tty2 tty35 tty50 tty9 vcs7 zero
dri loop3 ptmx ram9 stderr tty20 tty36 tty51 ttyS0 vcs8
fd loop4 pts random stdin tty21 tty37 tty52 ttyS1 vcs9
full loop5 ram0 sda stdout tty22 tty38 tty53 ttyS2 vcsa
fuse loop6 ram1 sda1 tty tty23 tty39 tty54 ttyS3 vcsa1
hidraw0 loop7 ram10 sda2 tty0 tty24 tty4 tty55 urandom vcsa10
hidraw1 lpfcmgmt ram11 sda3 tty1 tty25 tty40 tty56 usb vcsa11
hidraw2 mapper ram12 sda5 tty10 tty26 tty41 tty57 vcs vcsa12
michi-kiste /dev # cd snd
michi-kiste /dev/snd # ls
controlC0 controlC1 hwC0D0 hwC1D0 pcmC0D0c pcmC0D0p pcmC0D1p pcmC0D2c pcmC1D3p timer
|
if i start the modprobe i get infos in dmesg:
Code: | [ 1297.558591] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input4
[ 1297.559829] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 1297.559830] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1297.559832] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1297.559832] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 1297.559833] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 1297.559834] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 1297.559835] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 1297.559836] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 1297.559837] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 1297.571956] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 1297.572011] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 1297.572064] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 1297.572116] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 1297.572169] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sou |
And now starts alsamixergui and speakertest
Code: | michi-kiste /dev # alsamixergui
^C
michi-kiste /dev # speaker-test
speaker-test 1.1.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
Time per period = 2.836956
0 - Front Left
Time per period = 2.986639
0 - Front Left
Time per period = 2.986645
0 - Front Left
Time per period = 2.986647
0 - Front Left
|
But i dont hear anything. _________________ www.edv-bildung.de |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
Posted: Tue Oct 31, 2017 8:47 am Post subject: |
|
|
Cannot hear anything is not really a problem as long as speaker-test show it is working.
It could be that your speakers are not connect to the default soundcard (you can switch that using neddyseagoon's advice upper, or the link i gave about laptop and hdmi.
Or even simpler, it could just be that all is fine, but volume is mute or at 0
I'm more in doubt because manually load it works, but it should have done that for you from the very start itself.
We will see, you might have another issue, but with your device manager rather than sound. |
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Wed Nov 08, 2017 3:02 pm Post subject: |
|
|
yes, the master was mute. I saw it to late.
If iḿ root the sound works. if i am an user not. The user is in group audio. What i have to do?
Code: | michi@michi-kiste ~ $ id
uid=1000(michi) gid=18(audio) groups=18(audio),10(wheel),235(plugdev)
michi@michi-kiste ~ $ speaker-test
speaker-test 1.1.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:767:(parse_card) cannot find card '0'
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/confmisc.c:1246:(snd_func_refer) error evaluating name
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4371:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/conf.c:4850:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.1.2/work/alsa-lib-1.1.2/src/pcm/pcm.c:2450:(snd_pcm_open_noupdate) Unknown PCM default
Playback open error: -2,No such file or directory
michi@michi-kiste ~ $
michi-kiste /home/michi # speaker-test
speaker-test 1.1.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
Time per period = 2.837025
0 - Front Left
^CWrite error: -4,Interrupted system call
xrun_recovery failed: -4,Interrupted system call
Transfer failed: Interrupted system call
|
_________________ www.edv-bildung.de |
|
Back to top |
|
|
krinn Watchman
Joined: 02 May 2003 Posts: 7470
|
|
Back to top |
|
|
michi-monster Apprentice
Joined: 16 Aug 2016 Posts: 175 Location: Germany
|
Posted: Wed Nov 08, 2017 4:20 pm Post subject: |
|
|
I dont understand - i have add a normal user named michi. michi is in group audio. But i have add another user. Itś monster. There i get an error in d-bus-server
Id info of michi: Code: |
michi@michi-kiste ~ $ id
uid=1000(michi) gid=18(audio) groups=18(audio),10(wheel),100(users),235(plugdev)
|
Code: |
monster@michi-kiste /home/michi $ id
uid=1001(monster) gid=1001(monster) groups=1001(monster),10(wheel),18(audio),100(users)
monster@michi-kiste /home/michi $ amarok
unnamed app(29895): KUniqueApplication: Cannot find the D-Bus session server: "/usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
Autolaunch error: X11 initialization failed.
"
unnamed app(29894): KUniqueApplication: Pipe closed unexpectedly.
|
_________________ www.edv-bildung.de |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|