| View previous topic :: View next topic |
| Author |
Message |
reppk
n00b
Joined: 17 Mar 2016
Posts: 25
|
 Posted: Thu Dec 08, 2016 5:29 pm Post subject: Cannot use pf patch since gentoo-sources-4.8.11 |
 |
|
Hi, everyone!
I used to build my kernel (gentoo-sources) with pf & UKSM patches. However, I got error messages since 4.8.11. I found that this problem is caused by pf patch, and the message look like this:
| Code: | # genkernel all
* Gentoo Linux Genkernel; Version 65
* Running with options: all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.8.12-gentoo-r1 for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: Using config from /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: >> Running mrproper...
* >> Running oldconfig...
* kernel: >> Cleaning...
* kernel: >> Invoking menuconfig...
* >> Compiling 4.8.12-gentoo-r1 bzImage...
* >> Not installing firmware as it's included in the kernel already (CONFIG_FIRMWARE_IN_KERNEL=y)...
* >> Compiling 4.8.12-gentoo-r1 modules...
* ERROR: Failed to compile the "modules" target...
*
* -- Grepping log... --
*
* SHIPPED scripts/kconfig/zconf.lex.c
* SHIPPED scripts/kconfig/zconf.hash.c
* HOSTCC scripts/kconfig/zconf.tab.o
* HOSTLD scripts/kconfig/conf
*scripts/kconfig/conf --oldconfig Kconfig
*.config:307:warning: symbol value 'm' invalid for MICROCODE
*.config:407:warning: symbol value 'm' invalid for ACPI_CONTAINER
*.config:419:warning: symbol value 'm' invalid for CPU_FREQ_STAT
*.config:941:warning: symbol value 'm' invalid for RXKAD
*.config:2863:warning: symbol value 'm' invalid for RTC_LIB
*.config:2864:warning: symbol value 'm' invalid for RTC_CLASS
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] (NEW)
* Page migration (MIGRATION) [Y/?] (NEW) y
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
* Allow upgrading ACPI tables via initrd (ACPI_TABLE_UPGRADE) [Y/n/?] (NEW)
* Debug Statements (ACPI_DEBUG) [N/y/?] n
* PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
* Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
* Smart Battery System (ACPI_SBS) [N/m/y/?] n
* Hardware Error Device (ACPI_HED) [N/m/y/?] n
* Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)
* ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW)
* ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
* DPTF Platform Power Participant (DPTF_POWER) [N/m/y/?] (NEW)
* Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] (NEW)
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
* Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
* PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
* Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
* PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
* PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] y
* Page migration (MIGRATION) [Y/?] (NEW) y
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
* Allow upgrading ACPI tables via initrd (ACPI_TABLE_UPGRADE) [Y/n/?] y
* Debug Statements (ACPI_DEBUG) [N/y/?] n
* PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
* Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
* Smart Battery System (ACPI_SBS) [N/m/y/?] n
* Hardware Error Device (ACPI_HED) [N/m/y/?] n
* Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] n
* ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] n
* ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
* DPTF Platform Power Participant (DPTF_POWER) [N/m/y/?] n
* Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] n
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
* Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
* PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
* Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
* PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
* PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
*--
* * Wireless
* *
* Wireless (WIRELESS) [Y] y
* cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
* nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
* enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [M/n/y/?] m
*SCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
* Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*Verbose SCSI error reporting (kernel size += 36K) (SCSI_CONSTANTS) [N/y/?] n
*--
*OSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [M/n/y/?] m
* Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
* Enable full debugging output in iwlegacy (iwl 3945/4965) drivers (IWLEGACY_DEBUG) [N/y/?] (NEW)
* Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) (IWLWIFI) [M/n/?] m
* Intel Wireless WiFi DVM Firmware support (IWLDVM) [N/m/?] (NEW)
* Intel Wireless WiFi MVM Firmware support (IWLMVM) [N/m/?] (NEW)
* *
* * WARNING: iwlwifi is useless without IWLDVM or IWLMVM
*--
* IP-over-InfiniBand data path debugging (INFINIBAND_IPOIB_DEBUG_DATA) [N/y/?] (NEW)
* InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
* iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
* RDMA verbs transport library (INFINIBAND_RDMAVT) [N/m/?] (NEW)
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [N/y/?] n
*--
* JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [Y/n/m/?] y
* XFS Quota support (XFS_QUOTA) [Y/n/?] y
* XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
* XFS Realtime subvolume support (XFS_RT) [Y/n/?] y
* XFS Verbose Warnings (XFS_WARN) [N/y/?] (NEW)
*--
*Dnotify support (DNOTIFY) [Y/n/?] y
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [N/y/?] (NEW)
*Quota support (QUOTA) [Y/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
*Force round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Enable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW)
*--
* ^
*drivers/net/phy/phy.c:619:13: 附註：「phy_trigger_machine」 的上一個定義在此
* static void phy_trigger_machine(struct phy_device *phydev)
* ^
*drivers/net/phy/phy.c:619:13: 警告：「phy_trigger_machine」 定義後未使用 [-Wunused-function]
*scripts/Makefile.build:289: recipe for target 'drivers/net/phy/phy.o' failed
*make[3]: *** [drivers/net/phy/phy.o] Error 1
*scripts/Makefile.build:440: recipe for target 'drivers/net/phy' failed
*make[2]: *** [drivers/net/phy] Error 2
*--
* CC [M] drivers/scsi/qla4xxx/ql4_bsg.o
* CC [M] drivers/scsi/qla4xxx/ql4_83xx.o
* CC [M] drivers/scsi/qla2xxx/qla_tmpl.o
* LD [M] drivers/scsi/lpfc/lpfc.o
* LD [M] drivers/scsi/qla4xxx/qla4xxx.o
*scripts/Makefile.build:440: recipe for target 'drivers/net' failed
*make[1]: *** [drivers/net] Error 2
*make[1]: *** Waiting for unfinished jobs....
* LD [M] drivers/scsi/qla2xxx/qla2xxx.o
*Makefile:970: recipe for target 'drivers' failed
*make: *** [drivers] Error 2
*--
* Running with options: all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "modules" target...
*
* -- End log... -- |
Could anyone teach me how to deal with this problem?
Last edited by reppk on Sat Jan 07, 2017 1:28 pm; edited 2 times in total |
|
| Back to top |
|
 |
reppk
n00b
Joined: 17 Mar 2016
Posts: 25
|
| Posted: Fri Dec 16, 2016 12:50 pm Post subject: |
|
|
This problem is sloved in gentoo-source-4.9.0.
I guess it was caused by "Gentoo Linux" settings in the kernel. They put the settings at the top of the conf file since 4.8.11 in 4.8 series. |
|
| Back to top |
|
|
reppk
n00b
Joined: 17 Mar 2016
Posts: 25
|
| Posted: Sat Jan 07, 2017 1:28 pm Post subject: |
|
|
| The same problem shows up again in 4.9.1.... Orz |
|
| Back to top |
|
|
|
Kernel & Hardware
