| View previous topic :: View next topic |
| Author |
Message |
cord
Guru
Joined: 28 Apr 2007
Posts: 344
|
 Posted: Thu Oct 27, 2016 7:08 am Post subject: [CLOSE]ifplugd doesn't up interface when it fails to do so b |
 |
|
Hello, I have laptop (we call it client) with wired connection (enp2s0) and dhcp on it (dnsmasq on the other end, we call it server). If I start client before server (with cable plugged) it tries to obtain network settings and fails, so net is down (it uses udhcpc from busybox, it ussually reports that 'fails to start' when dnsmasq is down on the server).
| Code: | Oct 27 09:47:38 [ifplugd(enp2s0)] ifplugd 0.28 initializing.
Oct 27 09:47:38 [ifplugd(enp2s0)] Using interface enp2s0/6C:62:6D:30:D4:9E with driver <r8169> (version: 2.3LK-NAPI)
Oct 27 09:47:38 [ifplugd(enp2s0)] Using detection mode: SIOCETHTOOL
Oct 27 09:47:38 [ifplugd(enp2s0)] Initialization complete, link beat not detected.
Oct 27 09:47:51 [ifplugd(enp2s0)] Link beat detected.
Oct 27 09:47:52 [ifplugd(enp2s0)] Executing '/etc/ifplugd/ifplugd.action enp2s0 up'.
Oct 27 09:48:03 [ifplugd(enp2s0)] client: * start-stop-daemon: failed to start `/bin/busybox'
Oct 27 09:48:03 [ifplugd(enp2s0)] client: * ERROR: net.enp2s0 failed to start
Oct 27 09:48:03 [ifplugd(enp2s0)] Program executed successfully.
Oct 27 09:48:18 [ifplugd(enp2s0)] Link beat lost.
Oct 27 09:48:21 [ifplugd(enp2s0)] Link beat detected.
|
But if I start server next it doesn't retrying to do so. I have to restart interface on client manually to get net up. So it 'thinks' that there's still no dhcp service on the server or it doesn't know is server up or down at all.
Is there way to make it retrying to up net over and over if the cable is plugged and the server is started after?
Last edited by cord on Sun Oct 30, 2016 2:05 pm; edited 1 time in total |
|
| Back to top |
|
 |
cord
Guru
Joined: 28 Apr 2007
Posts: 344
|
| Posted: Sun Oct 30, 2016 2:04 pm Post subject: |
|
|
Seems that ifplugd checks cable position only, and no way to define the dhcp-service is running remotely or not.
But the NetworkManager can do this. |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
| Posted: Mon Oct 31, 2016 10:04 am Post subject: |
|
|
ifplugd (and other tools) have one chance to do something based on a cable event.
You have an error somewhere in /etc/ifplugd/ifplugd.action, or it's calling something that generated an error.
The error is likely of your own making - start-stop-daemon should not be calling busybox directly.
NetworkManager can do this because that logic is all self contained and compiled and you've likely not touched it.
dhcpcd will also work fine 
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool |
|
| Back to top |
|
|
cord
Guru
Joined: 28 Apr 2007
Posts: 344
|
| Posted: Mon Oct 31, 2016 10:49 am Post subject: |
|
|
| UberLord wrote: | | ifplugd (and other tools) have one chance to do something based on a cable event. |
Correct. It can't define is the 'dhcp-service' exists on the other end or not. While NetworkManager can.
| UberLord wrote: | You have an error somewhere in /etc/ifplugd/ifplugd.action, or it's calling something that generated an error.
The error is likely of your own making - start-stop-daemon should not be calling busybox directly.
|
No. Error is generated by udhcpc which is part of busybox. So, when the server is down (no dnsmasq working at the other end, so there's no distribution of network settings) udhcpc doesn't obtain anything ("fail to do it's job"), and busybox returns start-stop-daemon error. |
|
| Back to top |
|
|
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
|
| Back to top |
|
|
cord
Guru
Joined: 28 Apr 2007
Posts: 344
|
| Posted: Mon Oct 31, 2016 5:23 pm Post subject: |
|
|
| UberLord wrote: | | So you need to tell udhcpc to background (-b flag) if it cannot get a lease. But you don't want to use the -n flag as that will cause it to exit still. |
Well, maybe it will remove the error, but I doubt that this will set udhcpc to reasking lease again, later. |
|
| Back to top |
|
|
cord
Guru
Joined: 28 Apr 2007
Posts: 344
|
| Posted: Fri May 08, 2020 3:12 pm Post subject: |
|
|
So, the problem was at the remote side - dnsmasq didn't provide lease.
The correct config for it is:
| Code: |
resolv-file=/etc/resolv.conf
dhcp-host=03:5f:25:b6:54:a2,192.168.0.2,12h
dhcp-range=wired,192.168.0.2,static
|
|
|
| Back to top |
|
|
|
Networking & Security
