| View previous topic :: View next topic |
| Author |
Message |
turtles
Veteran
Joined: 31 Dec 2004
Posts: 1658
|
 Posted: Tue Oct 11, 2016 12:30 am Post subject: nmap "Unknown address family 10" |
 |
|
Greetings all I am trying to scan a network for open printer ports and am having a little trouble with nmap.
| Code: |
nmap -sP -PA21,22,25,3389 10.0.0.1/24
Starting Nmap 7.12 ( https://nmap.org ) at 2016-10-10 17:17 PDT
Unknown address family 10
QUITTING! |
| Code: | wlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.238 netmask 255.255.255.0 broadcast 10.0.0.255
inet6 2601:18c:c002:1ca6:a1bd:caa4:b438:1c6e prefixlen 64 scopeid 0x0<global>
inet6 fe80::d316:c2a:cefb:150f prefixlen 64 scopeid 0x20<link>
ether 24:77:03:ee:5a:28 txqueuelen 1000 (Ethernet)
RX packets 47797 bytes 32873188 (31.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 27185 bytes 4910919 (4.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
| Code: | nmap --iflist
Starting Nmap 7.12 ( https://nmap.org ) at 2016-10-10 17:24 PDT
************************INTERFACES************************
DEV (SHORT) IP/MASK TYPE UP MTU MAC
eth0 (eth0) (none)/0 ethernet up 1500 B8:CA:3A:BF:A7:FE
wmx0 (wmx0) (none)/0 other down 1400
wlan0 (wlan0) (none)/0 ethernet up 1500 24:77:03:EE:5A:29
wwan0 (wwan0) (none)/0 ethernet down 1500 53:72:56:4A:BD:2B
lo (lo) 127.0.0.1/8 loopback up 65536
lo (lo) (none)/128 loopback up 65536
wlan1 (wlan1) 10.0.0.238/24 ethernet up 1500 24:77:03:EE:5B:28
wlan1 (wlan1) (none)/64 ethernet up 1500 24:77:03:EE:5B:28
wlan1 (wlan1) (none)/64 ethernet up 1500 24:77:03:EE:5B:28
Segmentation fault
|
dmesg
| Code: |
[15579.305753] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15894.766794] iwlwifi 0000:0b:00.0: L1 Enabled - LTR Disabled
[15894.767071] iwlwifi 0000:0b:00.0: Radio type=0x1-0x2-0x0
[15894.986831] iwlwifi 0000:0b:00.0: L1 Enabled - LTR Disabled
[15894.987100] iwlwifi 0000:0b:00.0: Radio type=0x1-0x2-0x0
[15895.080378] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16000.926791] nmap[5005]: segfault at 0 ip 00007fa187cea63a sp 00007ffe75f7e008 error 4 in libc-2.22.so[7fa187c69000+193000]
|
_________________
Donate to Gentoo |
|
| Back to top |
|
 |
russK
l33t
Joined: 27 Jun 2006
Posts: 665
|
|
| Back to top |
|
|
Ant P.
Watchman
Joined: 18 Apr 2009
Posts: 6920
|
| Posted: Tue Oct 11, 2016 3:35 am Post subject: |
|
|
USE=ipv6.
| /usr/include/bits/socket.h: |
...
#define PF_INET6 10 /* IP version 6. */
...
#define AF_INET6 PF_INET6
...
|
|
|
| Back to top |
|
|
turtles
Veteran
Joined: 31 Dec 2004
Posts: 1658
|
| Posted: Wed Oct 12, 2016 4:18 am Post subject: |
|
|
Yeah it was strange to see that ip range as I remember frame relay. It seems to be the default dhcp range configuration on one of the newer comcast modems.
I discovered the printer using the cups web interface and wont be back to that place soon so it is a mystery for now.
I recompiled nmap and tested it on one of these in flight airplane networks and it seemed to work in its ip range
_________________
Donate to Gentoo |
|
| Back to top |
|
|
|
Networking & Security
