View previous topic :: View next topic |
Author |
Message |
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Mon Sep 26, 2016 4:47 pm Post subject: Black screen with nvidia proprietary drivers and KDE... |
|
|
Hello everyone,
There has been lots of issues with black screens and proprietary drivers, I've got another one...
First of all, my user is in video group.
I'm using nvidia-drivers-370.28 from bobwya overlay as well as xorg-server-1.18.4-r1 and eselect-opengl-1.3.2 from the same overlay (because of this bug).
If I use the following xorg.conf Code: | Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:4:0:0"
EndSection | ]I just get a black screen with blinking underscore in the upper left corner of the screen.
If I do not use xorg.conf at all I get Code: | Plasma is unable to start as it could not correctly use OpenGL 2.
Please check that your graphic drivers are set up correctly. | error message. However if I run Code: | eselect opengl set mesa | my plasma works flawlessly.
What do you think could be the issue? Some info about my system:
lspci -k
Code: | 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
Subsystem: Lenovo Haswell-ULT DRAM Controller
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
Subsystem: Lenovo Haswell-ULT Integrated Graphics Controller
Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
Subsystem: Lenovo Haswell-ULT HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
Subsystem: Lenovo 8 Series USB xHCI HC
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
Subsystem: Lenovo 8 Series HECI
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Lenovo 8 Series HD Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
Subsystem: Lenovo 8 Series LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
Subsystem: Lenovo 8 Series SATA Controller 1 [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
Subsystem: Lenovo 8 Series SMBus Controller
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
Subsystem: Lenovo RTL8723BE PCIe Wireless Network Adapter
Kernel driver in use: rtl8723be
Kernel modules: rtl8723be
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)
Subsystem: Lenovo GM108M [GeForce 840M]
Kernel driver in use: nvidia
Kernel modules: nvidia_drm, nvidia |
equery uses xorg-server && equery uses mesa && equery uses nvidia-drivers
Code: |
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for x11-base/xorg-server-1.18.4-r1:
U I
- - dmx : Build the Distributed Multiheaded X server
- - doc : Add extra documentation (API, Javadoc, etc). It is recommended to enable per package
instead of globally
- - fop : <unknown>
+ + glamor : Enable Glamor OpenGL 2D acceleration
+ + ipv6 : Add support for IP version 6
- - kdrive : Build the kdrive X servers
- - libressl : Use dev-libs/libressl as SSL provider (might need ssl USE flag), packages should not
depend on this USE flag
- - minimal : Install a very minimal build (disables, for example, plugins, fonts, most drivers,
non-critical features)
- - static-libs : Build static versions of dynamic libraries as well
+ + suid : Enable setuid root program, with potential security risks
- - systemd : Enable use of systemd-specific libraries and features like socket activation or
session tracking
- - tslib : Build with tslib support for touchscreen devices
+ + udev : Enable virtual/udev integration (device discovery, power and storage device support,
etc)
- - unwind : Enable libunwind usage for backtraces
- - wayland : Enable dev-libs/wayland backend
- - xephyr : Build the Xephyr server
- - xnest : Build the Xnest server
+ + xorg : Build the Xorg X server (HIGHLY RECOMMENDED)
+ + xvfb : Build the Xvfb server
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for media-libs/mesa-12.0.1-r1:
U I
+ + abi_x86_32 : 32-bit (x86) libraries
- - bindist : Disable patent-encumbered ARB_texture_float, EXT_texture_shared_exponent,
and EXT_packed_float extensions.
+ + classic : Build drivers based on the classic architecture.
- - d3d9 : Enable Direct 3D9 API through Nine state tracker. Can be used together with
patched wine.
- - debug : Enable extra debug codepaths, like asserts and extra output. If you want to
get meaningful backtraces see
https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Backtraces
+ + dri3 : Enable DRI3 support.
+ + egl : Enable EGL support.
+ + gallium : Build drivers based on Gallium3D, the new architecture for 3D graphics
drivers.
+ + gbm : Enable the Graphics Buffer Manager for EGL on KMS.
- - gles1 : Enable GLESv1 support.
- - gles2 : Enable GLESv2 support.
+ + llvm : Enable LLVM backend for Gallium3D.
+ + nptl : Enable support for Native POSIX Threads Library, the new threading module
(requires linux-2.6 or better usually)
+ + opencl : Enable the Clover Gallium OpenCL state tracker.
+ + openmax : Enable OpenMAX video decode/encode acceleration for Gallium3D.
+ + osmesa : Build the Mesa library for off-screen rendering.
- - pax_kernel : Enable if the user plans to run the package under a pax enabled hardened
kernel
- - pic : disable optimized assembly code that is not PIC friendly
+ + udev : Enable virtual/udev integration (device discovery, power and storage device
support, etc)
+ + vaapi : Enable Video Acceleration API for hardware decoding
- - valgrind : Compile in valgrind memory hints
+ + vdpau : Enable the VDPAU acceleration interface for the Gallium3D Video Layer.
- - video_cards_i915 : VIDEO_CARDS setting to build driver for Intel i915 video cards
+ + video_cards_i965 : VIDEO_CARDS setting to build driver for Intel i965 video cards
- - video_cards_ilo : VIDEO_CARDS setting to build unofficial gallium driver for Intel gen6/7
video cards
+ + video_cards_intel : VIDEO_CARDS setting to build driver for Intel video cards
- - video_cards_nouveau : VIDEO_CARDS setting to build reverse-engineered driver for nvidia cards
- - video_cards_r100 : VIDEO_CARDS setting to build only r100 based chips code for radeon
- - video_cards_r200 : VIDEO_CARDS setting to build only r200 based chips code for radeon
- - video_cards_r300 : VIDEO_CARDS setting to build only r300, r400 and r500 based chips code for
radeon
- - video_cards_r600 : VIDEO_CARDS setting to build only r600, r700, Evergreen and Northern Islands
based chips code for radeon
- - video_cards_radeon : VIDEO_CARDS setting to build driver for ATI radeon video cards
- - video_cards_radeonsi : VIDEO_CARDS setting to build only Southern Islands based chips code for
radeon
- - video_cards_vmware : VIDEO_CARDS setting to build driver for vmware video cards
+ + wayland : Enable support for dev-libs/wayland
+ + xa : Enable the XA (X Acceleration) API for Gallium3D.
+ + xvmc : Enable the XvMC acceleration interface for the Gallium3D Video Layer.
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for x11-drivers/nvidia-drivers-370.28:
U I
+ + X : Install the X.org driver, OpenGL libraries, XvMC libraries, and VDPAU libraries
+ + acpi : Add support for Advanced Configuration and Power Interface
- - compat : Install non-GLVND libGL for backwards compatibility
+ + driver : Install the kernel driver module
- - gtk3 : Install nvidia-settings with support for GTK+ 3
+ + kms : Enable support for kernel mode setting (KMS)
+ + multilib : On 64bit systems, if you want to be able to compile 32bit and 64bit binaries
- - pax_kernel : PaX patches from the PaX project
- - static-libs : Build static versions of dynamic libraries as well
+ + tools : Install additional tools such as nvidia-settings
- - uvm : Install the Unified Memory kernel module (nvidia-uvm) for sharing memory between CPU
and GPU in CUDA programs
- - wayland : Enable dev-libs/wayland backend |
cat /etc/portage/make.conf
Code: |
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE and USE_EXPAND flags that were used for
# buidling in addition to what is provided by the profile.
USE="-bluetooth vaapi vdpau -wayland gpg networkmanager uxa xvmc video sound pulseaudio icu opencl opengl openmax osmesa xa -gles1 -gles2 -egl evdev -eglfs libinput -gles"
CPU_FLAGS_X86="aes avx avx2 fma3 mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
MAKEOPTS="-j5"
GENTOO_MIRRORS="http://mirror.leaseweb.com/gentoo/ http://mirror.switch.ch/ftp/mirror/gentoo/ http://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/"
ACCEPT_LICENSE="@FREE CC-Sampling-Plus-1.0"
INPUT_DEVICES="keyboard mouse evdev synaptics"
VIDEO_CARDS="intel i965 nvidia"
GRUB_PLATFORMS=efi-64
source /var/lib/layman/make.conf |
emerge --info
Code: |
Portage 2.2.28 (python 3.4.3-final-0, default/linux/amd64/13.0/desktop/plasma, gcc-4.9.3, glibc-2.22-r4, 4.4.6-gentoo x86_64)
=================================================================
System uname: Linux-4.4.6-gentoo-x86_64-Intel-R-_Core-TM-_i3-4030U_CPU_@_1.90GHz-with-gentoo-2.2
KiB Mem: 16378760 total, 8250580 free
KiB Swap: 0 total, 0 free
Timestamp of repository gentoo: Wed, 21 Sep 2016 19:00:01 +0000
sh bash 4.3_p46-r1
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash: 4.3_p46-r1::gentoo
dev-java/java-config: 2.2.0-r3::gentoo
dev-lang/perl: 5.22.2::gentoo
dev-lang/python: 2.7.10-r1::gentoo, 3.4.3-r1::gentoo
dev-util/cmake: 3.5.2-r1::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.2::gentoo
sys-apps/openrc: 0.21.7::gentoo
sys-apps/sandbox: 2.10-r1::gentoo
sys-devel/autoconf: 2.13::gentoo, 2.69::gentoo
sys-devel/automake: 1.14.1::gentoo, 1.15::gentoo
sys-devel/binutils: 2.25.1-r1::gentoo
sys-devel/gcc: 4.9.3::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6::gentoo
sys-devel/make: 4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc: 2.22-r4::gentoo
Repositories:
gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000
bar
location: /var/lib/layman/bar
masters: gentoo
priority: 0
bobwya
location: /var/lib/layman/bobwya
masters: gentoo
priority: 1
abendbrot
location: /var/lib/layman/abendbrot
masters: gentoo
priority: 2
sabayon
location: /var/lib/layman/sabayon
masters: gentoo
priority: 3
steam-overlay
location: /var/lib/layman/steam-overlay
masters: gentoo
priority: 4
pg_overlay
location: /var/lib/layman/pg_overlay
masters: gentoo
priority: 5
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA @FREE CC-Sampling-Plus-1.0"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://mirror.leaseweb.com/gentoo/ http://mirror.switch.ch/ftp/mirror/gentoo/ http://ftp-stud.hs-esslingen.de/pub/Mirrors/gentoo/"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl acpi alsa amd64 berkdb branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups cxx dbus declarative dri dts dvd dvdr emboss encode evdev exif fam firefox flac fortran gdbm gif glamor gpg gpm gtk iconv icu ipv6 jpeg kde kipi lcms ldap libinput libnotify mad mmx mmxext mng modules mp3 mp4 mpeg multilib ncurses networkmanager nls nptl ogg opencl opengl openmax openmp osmesa pam pango pcre pdf phonon plasma png policykit ppds pulseaudio qml qt3support qt4 qt5 readline sdl seccomp semantic-desktop session sound spell sse sse2 ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb uxa vaapi vdpau video vorbis widgets wxwidgets x264 xa xattr xcb xcomposite xinerama xml xscreensaver xv xvid xvmc zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx avx2 fma3 mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" GRUB_PLATFORMS="efi-64" INPUT_DEVICES="keyboard mouse evdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby20 ruby21" USERLAND="GNU" VIDEO_CARDS="intel i965 nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON |
cat /var/log/Xorg.0.log if eselect opengl set nvidia and using xorg.conf
Code: |
[280983.485]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[280983.489] X Protocol Version 11, Revision 0
[280983.490] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[280983.491] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[280983.491] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[280983.495] Build Date: 23 September 2016 02:11:38PM
[280983.496]
[280983.497] Current version of pixman: 0.34.0
[280983.500] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[280983.500] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[280983.505] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 26 19:50:13 2016
[280983.506] (==) Using config file: "/etc/X11/xorg.conf"
[280983.507] (==) Using config directory: "/etc/X11/xorg.conf.d"
[280983.509] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[280983.509] (==) No Layout section. Using the first Screen section.
[280983.509] (==) No screen section available. Using defaults.
[280983.509] (**) |-->Screen "Default Screen Section" (0)
[280983.509] (**) | |-->Monitor "<default monitor>"
[280983.509] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[280983.509] (**) | |-->Device "nvidia"
[280983.509] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[280983.509] (==) Automatically adding devices
[280983.509] (==) Automatically enabling devices
[280983.509] (==) Automatically adding GPU devices
[280983.509] (==) Max clients allowed: 256, resource mask: 0x1fffff
[280983.509] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[280983.509] (**) ModulePath set to "/usr/lib64/xorg/nvidia,/usr/lib64/xorg/modules,/usr/lib64/xorg/modules"
[280983.509] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[280983.509] (II) Loader magic: 0x811c80
[280983.509] (II) Module ABI versions:
[280983.509] X.Org ANSI C Emulation: 0.4
[280983.509] X.Org Video Driver: 20.0
[280983.509] X.Org XInput driver : 22.1
[280983.509] X.Org Server Extension : 9.0
[280983.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[280983.509] (II) xfree86: Adding drm device (/dev/dri/card1)
[280983.512] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[280983.512] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[280983.512] (II) LoadModule: "glx"
[280983.512] (II) Loading /usr/lib64/xorg/nvidia/extensions/libglx.so
[280983.515] (II) Module glx: vendor="NVIDIA Corporation"
[280983.516] compiled for 4.0.2, module version = 1.0.0
[280983.516] Module class: X.Org Server Extension
[280983.516] (II) NVIDIA GLX Module 370.28 Thu Sep 1 19:14:30 PDT 2016
[280983.516] (II) LoadModule: "nvidia"
[280983.516] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[280983.516] (II) Module nvidia: vendor="NVIDIA Corporation"
[280983.516] compiled for 4.0.2, module version = 1.0.0
[280983.516] Module class: X.Org Video Driver
[280983.516] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[280983.516] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[280983.516] (--) using VT number 7
[280983.523] (II) Loading sub module "fb"
[280983.523] (II) LoadModule: "fb"
[280983.523] (II) Loading /usr/lib64/xorg/modules/libfb.so
[280983.524] (II) Module fb: vendor="X.Org Foundation"
[280983.524] compiled for 1.18.4, module version = 1.0.0
[280983.524] ABI class: X.Org ANSI C Emulation, version 0.4
[280983.524] (II) Loading sub module "wfb"
[280983.524] (II) LoadModule: "wfb"
[280983.524] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[280983.524] (II) Module wfb: vendor="X.Org Foundation"
[280983.524] compiled for 1.18.4, module version = 1.0.0
[280983.524] ABI class: X.Org ANSI C Emulation, version 0.4
[280983.524] (II) Loading sub module "ramdac"
[280983.524] (II) LoadModule: "ramdac"
[280983.524] (II) Module "ramdac" already built-in
[280983.525] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[280983.525] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[280983.525] (==) NVIDIA(0): RGB weight 888
[280983.525] (==) NVIDIA(0): Default visual is TrueColor
[280983.525] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[280983.525] (**) NVIDIA(0): Enabling 2D acceleration
[280983.688] (II) NVIDIA(0): NVIDIA GPU GeForce 840M (GM108-A) at PCI:4:0:0 (GPU-0)
[280983.688] (--) NVIDIA(0): Memory: 2097152 kBytes
[280983.688] (--) NVIDIA(0): VideoBIOS: 82.08.14.00.6f
[280983.688] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[280983.688] (II) NVIDIA(0): Validated MetaModes:
[280983.688] (II) NVIDIA(0): "NULL"
[280983.688] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[280983.688] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[280983.688] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[280983.688] (--) Depth 24 pixmap format is 32 bpp
[280983.689] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[280983.689] (II) NVIDIA: access.
[280983.717] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[280983.718] (II) NVIDIA(0): Setting mode "NULL"
[280983.722] (==) NVIDIA(0): Disabling shared memory pixmaps
[280983.722] (==) NVIDIA(0): Backing store enabled
[280983.722] (==) NVIDIA(0): Silken mouse enabled
[280983.722] (==) NVIDIA(0): DPMS enabled
[280983.722] (II) Loading sub module "dri2"
[280983.722] (II) LoadModule: "dri2"
[280983.722] (II) Module "dri2" already built-in
[280983.722] (II) NVIDIA(0): [DRI2] Setup complete
[280983.722] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[280983.722] (--) RandR disabled
[280983.722] (II) Initializing extension GLX
[280983.723] (II) Indirect GLX disabled.
[280983.801] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[280983.801] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[280983.801] (II) LoadModule: "evdev"
[280983.802] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[280983.802] (II) Module evdev: vendor="X.Org Foundation"
[280983.802] compiled for 1.18.4, module version = 2.10.3
[280983.802] Module class: X.Org XInput Driver
[280983.802] ABI class: X.Org XInput driver, version 22.1
[280983.802] (II) Using input driver 'evdev' for 'Power Button'
[280983.802] (**) Power Button: always reports core events
[280983.802] (**) evdev: Power Button: Device: "/dev/input/event2"
[280983.802] (--) evdev: Power Button: Vendor 0 Product 0x1
[280983.802] (--) evdev: Power Button: Found keys
[280983.802] (II) evdev: Power Button: Configuring as keyboard
[280983.802] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[280983.802] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[280983.802] (**) Option "xkb_rules" "evdev"
[280983.802] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[280983.802] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[280983.802] (II) Using input driver 'evdev' for 'Video Bus'
[280983.803] (**) Video Bus: always reports core events
[280983.803] (**) evdev: Video Bus: Device: "/dev/input/event4"
[280983.803] (--) evdev: Video Bus: Vendor 0 Product 0x6
[280983.803] (--) evdev: Video Bus: Found keys
[280983.803] (II) evdev: Video Bus: Configuring as keyboard
[280983.803] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[280983.803] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[280983.803] (**) Option "xkb_rules" "evdev"
[280983.803] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[280983.803] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[280983.803] (II) Using input driver 'evdev' for 'Video Bus'
[280983.803] (**) Video Bus: always reports core events
[280983.803] (**) evdev: Video Bus: Device: "/dev/input/event3"
[280983.803] (--) evdev: Video Bus: Vendor 0 Product 0x6
[280983.803] (--) evdev: Video Bus: Found keys
[280983.803] (II) evdev: Video Bus: Configuring as keyboard
[280983.803] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[280983.803] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[280983.803] (**) Option "xkb_rules" "evdev"
[280983.803] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[280983.804] (II) No input driver specified, ignoring this device.
[280983.804] (II) This device may have been added with another device file.
[280983.804] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[280983.804] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[280983.804] (II) Using input driver 'evdev' for 'Sleep Button'
[280983.804] (**) Sleep Button: always reports core events
[280983.804] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[280983.804] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[280983.804] (--) evdev: Sleep Button: Found keys
[280983.804] (II) evdev: Sleep Button: Configuring as keyboard
[280983.804] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[280983.804] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[280983.804] (**) Option "xkb_rules" "evdev"
[280983.804] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[280983.804] (II) No input driver specified, ignoring this device.
[280983.804] (II) This device may have been added with another device file.
[280983.804] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[280983.805] (II) No input driver specified, ignoring this device.
[280983.805] (II) This device may have been added with another device file.
[280983.805] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[280983.805] (II) No input driver specified, ignoring this device.
[280983.805] (II) This device may have been added with another device file.
[280983.805] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[280983.805] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[280983.805] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[280983.805] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[280983.805] (**) Razer Razer DeathAdder Chroma: always reports core events
[280983.805] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[280983.856] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[280983.856] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[280983.856] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[280983.856] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[280983.856] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[280983.856] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[280983.856] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[280983.856] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[280983.856] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[280983.856] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0004/input/input20/event5"
[280983.856] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[280983.856] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[280983.856] (**) Option "AccelerationScheme" "none"
[280983.856] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[280983.856] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[280983.856] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[280983.856] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[280983.856] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[280983.856] (II) No input driver specified, ignoring this device.
[280983.856] (II) This device may have been added with another device file.
[280983.857] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[280983.857] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[280983.857] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[280983.857] (**) Razer Razer DeathAdder Chroma: always reports core events
[280983.857] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[280983.857] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[280983.857] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[280983.857] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[280983.857] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[280983.857] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[280983.857] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[280983.857] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[280983.857] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0005/input/input21/event6"
[280983.857] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[280983.857] (**) Option "xkb_rules" "evdev"
[280983.857] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[280983.857] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[280983.857] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[280983.857] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[280983.857] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[280983.857] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[280983.858] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[280983.858] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[280983.858] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[280983.858] (**) Razer Razer DeathAdder Chroma: always reports core events
[280983.858] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[280983.858] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[280983.858] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[280983.858] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[280983.858] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0006/input/input22/event8"
[280983.858] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[280983.858] (**) Option "xkb_rules" "evdev"
[280983.858] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event15)
[280983.858] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[280983.858] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[280983.858] (**) Lenovo EasyCamera: always reports core events
[280983.858] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event15"
[280983.858] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[280983.858] (--) evdev: Lenovo EasyCamera: Found keys
[280983.858] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[280983.858] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input17/event15"
[280983.858] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[280983.858] (**) Option "xkb_rules" "evdev"
[280983.859] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[280983.859] (II) No input driver specified, ignoring this device.
[280983.859] (II) This device may have been added with another device file.
[280983.859] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[280983.859] (II) No input driver specified, ignoring this device.
[280983.859] (II) This device may have been added with another device file.
[280983.859] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event18)
[280983.859] (II) No input driver specified, ignoring this device.
[280983.859] (II) This device may have been added with another device file.
[280983.859] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[280983.859] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[280983.859] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[280983.859] (**) AT Translated Set 2 keyboard: always reports core events
[280983.859] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[280983.859] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[280983.859] (--) evdev: AT Translated Set 2 keyboard: Found keys
[280983.859] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[280983.859] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[280983.859] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[280983.859] (**) Option "xkb_rules" "evdev"
[280983.860] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[280983.860] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[280983.860] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[280983.860] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[280983.860] (II) LoadModule: "synaptics"
[280983.860] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[280983.860] (II) Module synaptics: vendor="X.Org Foundation"
[280983.860] compiled for 1.18.4, module version = 1.8.3
[280983.860] Module class: X.Org XInput Driver
[280983.860] ABI class: X.Org XInput driver, version 22.1
[280983.860] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[280983.860] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[280983.860] (**) Option "Device" "/dev/input/event10"
[280983.883] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[280983.883] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[280983.883] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[280983.883] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[280983.883] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[280983.883] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[280983.895] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[280983.895] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[280983.895] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[280983.895] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[280983.895] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[280983.895] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[280983.895] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[280983.895] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[280983.895] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[280983.895] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[280983.895] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[280983.895] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[280983.895] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[280983.895] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[280983.895] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[280983.895] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[280983.895] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[280983.896] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[280983.896] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[280983.896] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[280983.896] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[280983.896] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[280983.896] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[280983.896] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[280983.896] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[280983.896] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[280983.896] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[280983.896] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[280983.896] (**) Option "AccelerationScheme" "none"
[280983.896] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[280983.896] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[280983.896] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[280983.896] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[280983.896] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[280983.896] (II) No input driver specified, ignoring this device.
[280983.896] (II) This device may have been added with another device file.
[280983.896] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[280983.896] (II) No input driver specified, ignoring this device.
[280983.896] (II) This device may have been added with another device file.
#####The following happens after I terminate the X#########
[281069.744] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Close
[281069.744] (II) UnloadModule: "evdev"
[281069.744] (II) UnloadModule: "synaptics"
[281069.744] (II) evdev: AT Translated Set 2 keyboard: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Lenovo EasyCamera: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Razer Razer DeathAdder Chroma: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Razer Razer DeathAdder Chroma: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Razer Razer DeathAdder Chroma: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Sleep Button: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Video Bus: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Video Bus: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.745] (II) evdev: Power Button: Close
[281069.745] (II) UnloadModule: "evdev"
[281069.752] (II) NVIDIA(GPU-0): Deleting GPU-0
[281069.768] (II) Server terminated successfully (0). Closing log file. |
Thanks!
Last edited by Frustration on Tue Sep 27, 2016 2:34 pm; edited 1 time in total |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Mon Sep 26, 2016 5:09 pm Post subject: |
|
|
Seems I reached maximum allowed post lenght, so here's the last thing I wanted to add:
cat /var/log/Xorg.0.log if eselect opengl set mesa and not using xorg.conf (X works only this way so far)
Code: |
[281166.791]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[281166.795] X Protocol Version 11, Revision 0
[281166.796] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[281166.797] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[281166.797] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[281166.801] Build Date: 23 September 2016 02:11:38PM
[281166.802]
[281166.803] Current version of pixman: 0.34.0
[281166.806] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[281166.806] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[281166.811] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 26 19:53:16 2016
[281166.812] (==) Using config directory: "/etc/X11/xorg.conf.d"
[281166.814] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[281166.814] (==) No Layout section. Using the first Screen section.
[281166.814] (==) No screen section available. Using defaults.
[281166.814] (**) |-->Screen "Default Screen Section" (0)
[281166.814] (**) | |-->Monitor "<default monitor>"
[281166.814] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[281166.814] (==) Automatically adding devices
[281166.814] (==) Automatically enabling devices
[281166.814] (==) Automatically adding GPU devices
[281166.814] (==) Max clients allowed: 256, resource mask: 0x1fffff
[281166.814] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[281166.814] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/xorg/modules"
[281166.814] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[281166.814] (II) Loader magic: 0x811c80
[281166.814] (II) Module ABI versions:
[281166.814] X.Org ANSI C Emulation: 0.4
[281166.814] X.Org Video Driver: 20.0
[281166.814] X.Org XInput driver : 22.1
[281166.814] X.Org Server Extension : 9.0
[281166.814] (II) xfree86: Adding drm device (/dev/dri/card0)
[281166.814] (II) xfree86: Adding drm device (/dev/dri/card1)
[281166.817] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[281166.817] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[281166.817] (II) LoadModule: "glx"
[281166.817] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[281166.818] (II) Module glx: vendor="X.Org Foundation"
[281166.818] compiled for 1.18.4, module version = 1.0.0
[281166.818] ABI class: X.Org Server Extension, version 9.0
[281166.818] (==) AIGLX enabled
[281166.818] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[281166.818] loading driver: nvidia
[281166.818] (==) Matched intel as autoconfigured driver 0
[281166.818] (==) Matched nvidia as autoconfigured driver 1
[281166.818] (==) Matched nouveau as autoconfigured driver 2
[281166.818] (==) Matched nv as autoconfigured driver 3
[281166.818] (==) Matched intel as autoconfigured driver 4
[281166.818] (==) Matched modesetting as autoconfigured driver 5
[281166.818] (==) Matched fbdev as autoconfigured driver 6
[281166.818] (==) Matched vesa as autoconfigured driver 7
[281166.818] (==) Assigned the driver to the xf86ConfigLayout
[281166.818] (II) LoadModule: "intel"
[281166.818] (WW) Warning, couldn't open module intel
[281166.818] (II) UnloadModule: "intel"
[281166.818] (II) Unloading intel
[281166.818] (EE) Failed to load module "intel" (module does not exist, 0)
[281166.818] (II) LoadModule: "nvidia"
[281166.818] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[281166.818] (II) Module nvidia: vendor="NVIDIA Corporation"
[281166.818] compiled for 4.0.2, module version = 1.0.0
[281166.818] Module class: X.Org Video Driver
[281166.818] (II) LoadModule: "nouveau"
[281166.819] (WW) Warning, couldn't open module nouveau
[281166.819] (II) UnloadModule: "nouveau"
[281166.819] (II) Unloading nouveau
[281166.819] (EE) Failed to load module "nouveau" (module does not exist, 0)
[281166.819] (II) LoadModule: "nv"
[281166.819] (WW) Warning, couldn't open module nv
[281166.819] (II) UnloadModule: "nv"
[281166.819] (II) Unloading nv
[281166.819] (EE) Failed to load module "nv" (module does not exist, 0)
[281166.819] (II) LoadModule: "modesetting"
[281166.819] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[281166.819] (II) Module modesetting: vendor="X.Org Foundation"
[281166.819] compiled for 1.18.4, module version = 1.18.4
[281166.819] Module class: X.Org Video Driver
[281166.819] ABI class: X.Org Video Driver, version 20.0
[281166.819] (II) LoadModule: "fbdev"
[281166.819] (WW) Warning, couldn't open module fbdev
[281166.819] (II) UnloadModule: "fbdev"
[281166.819] (II) Unloading fbdev
[281166.819] (EE) Failed to load module "fbdev" (module does not exist, 0)
[281166.819] (II) LoadModule: "vesa"
[281166.819] (WW) Warning, couldn't open module vesa
[281166.819] (II) UnloadModule: "vesa"
[281166.820] (II) Unloading vesa
[281166.820] (EE) Failed to load module "vesa" (module does not exist, 0)
[281166.820] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[281166.820] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[281166.820] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[281166.820] (--) using VT number 7
[281166.825] (II) modeset(0): using drv /dev/dri/card0
[281166.825] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[281166.825] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[281166.825] (==) modeset(0): RGB weight 888
[281166.825] (==) modeset(0): Default visual is TrueColor
[281166.825] (II) Loading sub module "glamoregl"
[281166.825] (II) LoadModule: "glamoregl"
[281166.826] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[281166.830] (II) Module glamoregl: vendor="X.Org Foundation"
[281166.830] compiled for 1.18.4, module version = 1.0.0
[281166.830] ABI class: X.Org ANSI C Emulation, version 0.4
[281166.830] (II) glamor: OpenGL accelerated X.org driver based.
[281166.840] (II) glamor: EGL version 1.4 (DRI2):
[281166.841] (II) modeset(0): glamor initialized
[281166.842] (II) modeset(0): Output eDP-1 has no monitor section
[281166.930] (II) modeset(0): Output HDMI-1 has no monitor section
[281166.930] (II) modeset(0): EDID for output eDP-1
[281166.930] (II) modeset(0): Manufacturer: BOE Model: 611 Serial#: 0
[281166.930] (II) modeset(0): Year: 2014 Week: 1
[281166.930] (II) modeset(0): EDID Version: 1.4
[281166.930] (II) modeset(0): Digital Display Input
[281166.930] (II) modeset(0): 6 bits per channel
[281166.930] (II) modeset(0): Digital interface is DisplayPort
[281166.930] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[281166.930] (II) modeset(0): Gamma: 2.20
[281166.930] (II) modeset(0): No DPMS capabilities specified
[281166.930] (II) modeset(0): Supported color encodings: RGB 4:4:4
[281166.930] (II) modeset(0): First detailed timing is preferred mode
[281166.930] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[281166.930] (II) modeset(0): redX: 0.592 redY: 0.347 greenX: 0.328 greenY: 0.570
[281166.930] (II) modeset(0): blueX: 0.150 blueY: 0.114 whiteX: 0.312 whiteY: 0.328
[281166.930] (II) modeset(0): Manufacturer's mask: 0
[281166.930] (II) modeset(0): Supported detailed timing:
[281166.930] (II) modeset(0): clock: 141.4 MHz Image Size: 344 x 193 mm
[281166.930] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2142 h_border: 0
[281166.930] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1100 v_border: 0
[281166.930] (II) modeset(0): BOE HF
[281166.930] (II) modeset(0): HB156FH1-401
[281166.930] (II) modeset(0): EDID (in hex):
[281166.930] (II) modeset(0): 00ffffffffffff0009e5110600000000
[281166.930] (II) modeset(0): 011801049522137802b0909758549226
[281166.930] (II) modeset(0): 1d505400000001010101010101010101
[281166.930] (II) modeset(0): 0101010101013c3780de703814403020
[281166.930] (II) modeset(0): 360058c11000001a0000000000000000
[281166.930] (II) modeset(0): 00000000000000000000000000fe0042
[281166.930] (II) modeset(0): 4f452048460a202020202020000000fe
[281166.930] (II) modeset(0): 0048423135364648312d3430310a0002
[281166.931] (II) modeset(0): Printing probed modes for output eDP-1
[281166.931] (II) modeset(0): Modeline "1920x1080"x60.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[281166.931] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[281166.931] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[281166.931] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[281166.931] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[281166.931] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[281166.931] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[281166.931] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[281166.931] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[281166.931] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[281166.931] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[281166.931] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[281166.931] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[281166.931] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[281166.931] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[281166.931] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[281166.931] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[281167.019] (II) modeset(0): EDID for output HDMI-1
[281167.019] (II) modeset(0): Output eDP-1 connected
[281167.019] (II) modeset(0): Output HDMI-1 disconnected
[281167.019] (II) modeset(0): Using exact sizes for initial modes
[281167.019] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[281167.019] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[281167.019] (==) modeset(0): DPI set to (96, 96)
[281167.019] (II) Loading sub module "fb"
[281167.019] (II) LoadModule: "fb"
[281167.019] (II) Loading /usr/lib64/xorg/modules/libfb.so
[281167.019] (II) Module fb: vendor="X.Org Foundation"
[281167.019] compiled for 1.18.4, module version = 1.0.0
[281167.019] ABI class: X.Org ANSI C Emulation, version 0.4
[281167.019] (==) Depth 24 pixmap format is 32 bpp
[281167.115] (==) modeset(0): Backing store enabled
[281167.115] (==) modeset(0): Silken mouse enabled
[281167.115] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[281167.115] (==) modeset(0): DPMS enabled
[281167.115] (II) modeset(0): [DRI2] Setup complete
[281167.115] (II) modeset(0): [DRI2] DRI driver: i965
[281167.115] (II) modeset(0): [DRI2] VDPAU driver: i965
[281167.128] (--) RandR disabled
[281167.133] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[281167.133] (II) AIGLX: enabled GLX_ARB_create_context
[281167.133] (II) AIGLX: enabled GLX_ARB_create_context_profile
[281167.133] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[281167.133] (II) AIGLX: enabled GLX_INTEL_swap_event
[281167.133] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[281167.133] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[281167.133] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[281167.133] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[281167.133] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[281167.133] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[281167.133] (II) AIGLX: Loaded and initialized i965
[281167.133] (II) GLX: Initialized DRI2 GL provider for screen 0
[281167.134] (II) modeset(0): Damage tracking initialized
[281167.134] (II) modeset(0): Setting screen physical size to 508 x 285
[281167.211] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[281167.211] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[281167.211] (II) LoadModule: "evdev"
[281167.211] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[281167.212] (II) Module evdev: vendor="X.Org Foundation"
[281167.212] compiled for 1.18.4, module version = 2.10.3
[281167.212] Module class: X.Org XInput Driver
[281167.212] ABI class: X.Org XInput driver, version 22.1
[281167.212] (II) Using input driver 'evdev' for 'Power Button'
[281167.212] (**) Power Button: always reports core events
[281167.212] (**) evdev: Power Button: Device: "/dev/input/event2"
[281167.212] (--) evdev: Power Button: Vendor 0 Product 0x1
[281167.212] (--) evdev: Power Button: Found keys
[281167.212] (II) evdev: Power Button: Configuring as keyboard
[281167.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[281167.212] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[281167.212] (**) Option "xkb_rules" "evdev"
[281167.212] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[281167.212] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[281167.212] (II) Using input driver 'evdev' for 'Video Bus'
[281167.212] (**) Video Bus: always reports core events
[281167.212] (**) evdev: Video Bus: Device: "/dev/input/event4"
[281167.212] (--) evdev: Video Bus: Vendor 0 Product 0x6
[281167.212] (--) evdev: Video Bus: Found keys
[281167.212] (II) evdev: Video Bus: Configuring as keyboard
[281167.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[281167.212] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[281167.212] (**) Option "xkb_rules" "evdev"
[281167.213] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[281167.213] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[281167.213] (II) Using input driver 'evdev' for 'Video Bus'
[281167.213] (**) Video Bus: always reports core events
[281167.213] (**) evdev: Video Bus: Device: "/dev/input/event3"
[281167.213] (--) evdev: Video Bus: Vendor 0 Product 0x6
[281167.213] (--) evdev: Video Bus: Found keys
[281167.213] (II) evdev: Video Bus: Configuring as keyboard
[281167.213] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[281167.213] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[281167.213] (**) Option "xkb_rules" "evdev"
[281167.213] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[281167.213] (II) No input driver specified, ignoring this device.
[281167.213] (II) This device may have been added with another device file.
[281167.214] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[281167.214] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[281167.214] (II) Using input driver 'evdev' for 'Sleep Button'
[281167.214] (**) Sleep Button: always reports core events
[281167.214] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[281167.214] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[281167.214] (--) evdev: Sleep Button: Found keys
[281167.214] (II) evdev: Sleep Button: Configuring as keyboard
[281167.214] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[281167.214] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[281167.214] (**) Option "xkb_rules" "evdev"
[281167.214] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[281167.214] (II) No input driver specified, ignoring this device.
[281167.214] (II) This device may have been added with another device file.
[281167.214] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[281167.214] (II) No input driver specified, ignoring this device.
[281167.214] (II) This device may have been added with another device file.
[281167.215] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[281167.215] (II) No input driver specified, ignoring this device.
[281167.215] (II) This device may have been added with another device file.
[281167.215] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[281167.215] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[281167.215] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[281167.215] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[281167.215] (**) Razer Razer DeathAdder Chroma: always reports core events
[281167.215] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[281167.266] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[281167.266] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[281167.266] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[281167.266] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[281167.266] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[281167.266] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[281167.266] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[281167.266] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[281167.266] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[281167.266] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0004/input/input20/event5"
[281167.266] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[281167.266] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[281167.266] (**) Option "AccelerationScheme" "none"
[281167.266] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[281167.266] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[281167.266] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[281167.266] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[281167.266] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[281167.266] (II) No input driver specified, ignoring this device.
[281167.266] (II) This device may have been added with another device file.
[281167.267] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[281167.267] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[281167.267] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[281167.267] (**) Razer Razer DeathAdder Chroma: always reports core events
[281167.267] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[281167.267] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[281167.267] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[281167.267] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[281167.267] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[281167.267] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[281167.267] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[281167.267] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[281167.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0005/input/input21/event6"
[281167.267] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[281167.267] (**) Option "xkb_rules" "evdev"
[281167.267] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[281167.267] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[281167.267] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[281167.267] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[281167.267] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[281167.267] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[281167.268] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[281167.268] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[281167.268] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[281167.268] (**) Razer Razer DeathAdder Chroma: always reports core events
[281167.268] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[281167.268] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[281167.268] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[281167.268] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[281167.268] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0006/input/input22/event8"
[281167.268] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[281167.268] (**) Option "xkb_rules" "evdev"
[281167.268] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event15)
[281167.268] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[281167.268] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[281167.268] (**) Lenovo EasyCamera: always reports core events
[281167.268] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event15"
[281167.268] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[281167.268] (--) evdev: Lenovo EasyCamera: Found keys
[281167.268] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[281167.268] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input17/event15"
[281167.268] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[281167.268] (**) Option "xkb_rules" "evdev"
[281167.269] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[281167.269] (II) No input driver specified, ignoring this device.
[281167.269] (II) This device may have been added with another device file.
[281167.269] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[281167.269] (II) No input driver specified, ignoring this device.
[281167.269] (II) This device may have been added with another device file.
[281167.269] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event18)
[281167.269] (II) No input driver specified, ignoring this device.
[281167.269] (II) This device may have been added with another device file.
[281167.269] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[281167.269] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[281167.269] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[281167.269] (**) AT Translated Set 2 keyboard: always reports core events
[281167.269] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[281167.269] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[281167.269] (--) evdev: AT Translated Set 2 keyboard: Found keys
[281167.269] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[281167.269] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[281167.269] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[281167.269] (**) Option "xkb_rules" "evdev"
[281167.270] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[281167.270] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[281167.270] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[281167.270] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[281167.270] (II) LoadModule: "synaptics"
[281167.270] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[281167.270] (II) Module synaptics: vendor="X.Org Foundation"
[281167.270] compiled for 1.18.4, module version = 1.8.3
[281167.270] Module class: X.Org XInput Driver
[281167.270] ABI class: X.Org XInput driver, version 22.1
[281167.270] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[281167.270] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[281167.270] (**) Option "Device" "/dev/input/event10"
[281167.298] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[281167.298] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[281167.298] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[281167.298] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[281167.298] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[281167.298] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[281167.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[281167.310] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[281167.310] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[281167.310] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[281167.310] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[281167.310] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[281167.310] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[281167.310] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[281167.310] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[281167.310] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[281167.310] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[281167.310] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[281167.310] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[281167.310] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[281167.310] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[281167.310] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[281167.310] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[281167.310] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[281167.311] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[281167.311] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[281167.311] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[281167.311] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[281167.311] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[281167.311] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[281167.311] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[281167.311] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[281167.311] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[281167.311] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[281167.311] (**) Option "AccelerationScheme" "none"
[281167.311] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[281167.311] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[281167.311] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[281167.311] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[281167.311] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[281167.311] (II) No input driver specified, ignoring this device.
[281167.311] (II) This device may have been added with another device file.
[281167.311] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[281167.311] (II) No input driver specified, ignoring this device.
[281167.311] (II) This device may have been added with another device file.
[281168.234] (II) modeset(0): EDID vendor "BOE", prod id 1553
[281168.234] (II) modeset(0): Printing DDC gathered Modelines:
[281168.234] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[281169.068] (II) modeset(0): EDID vendor "BOE", prod id 1553
[281169.068] (II) modeset(0): Printing DDC gathered Modelines:
[281169.068] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[281174.320] (II) AIGLX: Suspending AIGLX clients for VT switch
[281174.334] (EE) modeset(0): failed to set mode: Permission denied
[281178.489] (II) AIGLX: Resuming AIGLX clients after VT switch
[281178.493] (II) modeset(0): EDID vendor "BOE", prod id 1553
[281178.493] (II) modeset(0): Printing DDC gathered Modelines:
[281178.493] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[281178.633] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found |
Last edited by Frustration on Tue Sep 27, 2016 2:34 pm; edited 2 times in total |
|
Back to top |
|
|
asturm Developer
Joined: 05 Apr 2007 Posts: 8936
|
Posted: Mon Sep 26, 2016 5:15 pm Post subject: Re: Black screen with nvidia proprietary drivers and KDE... |
|
|
Frustration wrote: | I'm using nvidia-drivers-370.28 from bobwya overlay |
I'd say that puts your thread right into 'Unsupported Software'. |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Mon Sep 26, 2016 5:32 pm Post subject: Re: Black screen with nvidia proprietary drivers and KDE... |
|
|
asturm wrote: | Frustration wrote: | I'm using nvidia-drivers-370.28 from bobwya overlay |
I'd say that puts your thread right into 'Unsupported Software'. |
I first had packages from gentoo repository and it didn't work either, but then I came across the bug and emerged packages from this overlay... Still doesn't work.
I will recompile my packages again (from gentoo repo) and post the logs again, but I'm unsure if there even will be any difference. |
|
Back to top |
|
|
asturm Developer
Joined: 05 Apr 2007 Posts: 8936
|
Posted: Mon Sep 26, 2016 5:34 pm Post subject: |
|
|
Make sure you have egl and gles/gles2 disabled globally. After removing the overlay, run update world with --newrepo to make sure no cruft is left. |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Tue Sep 27, 2016 2:20 pm Post subject: Part1 |
|
|
asturm wrote: | Make sure you have egl and gles/gles2 disabled globally. After removing the overlay, run update world with --newrepo to make sure no cruft is left. |
Ok, so I've recompiled everything. Gles/gles1/gles2 as well as egl are disabled globally. The only exception is mesa, kwin requiresthat mesa has egl enabled and so it has egl enabled but nothing else.
Here are the logs:
If I have eselect opengl set nvidia, using xorg.conf, X.org libglx.so (you will see further what it's about).
cat /var/log/Xorg.0.log
Code: | [ 12522.536]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 12522.539] X Protocol Version 11, Revision 0
[ 12522.540] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[ 12522.541] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[ 12522.541] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[ 12522.545] Build Date: 27 September 2016 12:27:05PM
[ 12522.546]
[ 12522.547] Current version of pixman: 0.34.0
[ 12522.550] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12522.550] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12522.555] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 27 16:40:58 2016
[ 12522.556] (==) Using config file: "/etc/X11/xorg.conf"
[ 12522.557] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12522.559] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12522.559] (==) No Layout section. Using the first Screen section.
[ 12522.559] (==) No screen section available. Using defaults.
[ 12522.559] (**) |-->Screen "Default Screen Section" (0)
[ 12522.559] (**) | |-->Monitor "<default monitor>"
[ 12522.559] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12522.559] (**) | |-->Device "nvidia"
[ 12522.559] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12522.559] (==) Automatically adding devices
[ 12522.559] (==) Automatically enabling devices
[ 12522.559] (==) Automatically adding GPU devices
[ 12522.559] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12522.559] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12522.559] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/opengl/nvidia,/usr/lib64/xorg/modules"
[ 12522.559] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12522.559] (II) Loader magic: 0x811c80
[ 12522.559] (II) Module ABI versions:
[ 12522.559] X.Org ANSI C Emulation: 0.4
[ 12522.559] X.Org Video Driver: 20.0
[ 12522.559] X.Org XInput driver : 22.1
[ 12522.559] X.Org Server Extension : 9.0
[ 12522.559] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12522.559] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12522.562] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[ 12522.562] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[ 12522.562] (II) LoadModule: "glx"
[ 12522.562] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 12522.563] (II) Module glx: vendor="X.Org Foundation"
[ 12522.563] compiled for 1.18.4, module version = 1.0.0
[ 12522.563] ABI class: X.Org Server Extension, version 9.0
[ 12522.563] (==) AIGLX enabled
[ 12522.563] (II) LoadModule: "nvidia"
[ 12522.563] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 12522.563] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12522.563] compiled for 4.0.2, module version = 1.0.0
[ 12522.563] Module class: X.Org Video Driver
[ 12522.563] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[ 12522.563] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12522.563] (--) using VT number 7
[ 12522.569] (II) Loading sub module "fb"
[ 12522.569] (II) LoadModule: "fb"
[ 12522.569] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 12522.569] (II) Module fb: vendor="X.Org Foundation"
[ 12522.569] compiled for 1.18.4, module version = 1.0.0
[ 12522.569] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12522.569] (II) Loading sub module "wfb"
[ 12522.569] (II) LoadModule: "wfb"
[ 12522.569] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 12522.569] (II) Module wfb: vendor="X.Org Foundation"
[ 12522.569] compiled for 1.18.4, module version = 1.0.0
[ 12522.569] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12522.569] (II) Loading sub module "ramdac"
[ 12522.569] (II) LoadModule: "ramdac"
[ 12522.569] (II) Module "ramdac" already built-in
[ 12522.570] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12522.570] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 12522.570] (==) NVIDIA(0): RGB weight 888
[ 12522.570] (==) NVIDIA(0): Default visual is TrueColor
[ 12522.570] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12522.570] (**) NVIDIA(0): Enabling 2D acceleration
[ 12522.570] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 12522.570] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 12522.570] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 12522.570] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 12522.570] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 12522.727] (II) NVIDIA(0): NVIDIA GPU GeForce 840M (GM108-A) at PCI:4:0:0 (GPU-0)
[ 12522.727] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 12522.727] (--) NVIDIA(0): VideoBIOS: 82.08.14.00.6f
[ 12522.727] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 12522.727] (II) NVIDIA(0): Validated MetaModes:
[ 12522.727] (II) NVIDIA(0): "NULL"
[ 12522.727] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 12522.727] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 12522.727] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 12522.727] (--) Depth 24 pixmap format is 32 bpp
[ 12522.728] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 12522.728] (II) NVIDIA: access.
[ 12522.755] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 12522.755] (II) NVIDIA(0): Setting mode "NULL"
[ 12522.759] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12522.759] (==) NVIDIA(0): Backing store enabled
[ 12522.759] (==) NVIDIA(0): Silken mouse enabled
[ 12522.760] (==) NVIDIA(0): DPMS enabled
[ 12522.760] (II) Loading sub module "dri2"
[ 12522.760] (II) LoadModule: "dri2"
[ 12522.760] (II) Module "dri2" already built-in
[ 12522.760] (II) NVIDIA(0): [DRI2] Setup complete
[ 12522.760] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 12522.760] (--) RandR disabled
[ 12522.760] (II) AIGLX: Screen 0 is not DRI2 capable
[ 12522.760] (EE) AIGLX: reverting to software rendering
[ 12522.779] (EE) AIGLX error: dlopen of /usr/lib64/dri/swrast_dri.so failed (/usr/lib64/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[ 12522.779] (EE) GLX: could not load software renderer
[ 12522.779] (II) GLX: no usable GL providers found for screen 0
[ 12522.854] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12522.854] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12522.854] (II) LoadModule: "evdev"
[ 12522.854] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 12522.855] (II) Module evdev: vendor="X.Org Foundation"
[ 12522.855] compiled for 1.18.4, module version = 2.10.3
[ 12522.855] Module class: X.Org XInput Driver
[ 12522.855] ABI class: X.Org XInput driver, version 22.1
[ 12522.855] (II) Using input driver 'evdev' for 'Power Button'
[ 12522.855] (**) Power Button: always reports core events
[ 12522.855] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12522.855] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12522.855] (--) evdev: Power Button: Found keys
[ 12522.855] (II) evdev: Power Button: Configuring as keyboard
[ 12522.855] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 12522.855] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12522.855] (**) Option "xkb_rules" "evdev"
[ 12522.855] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 12522.855] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12522.855] (II) Using input driver 'evdev' for 'Video Bus'
[ 12522.855] (**) Video Bus: always reports core events
[ 12522.855] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 12522.855] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12522.855] (--) evdev: Video Bus: Found keys
[ 12522.855] (II) evdev: Video Bus: Configuring as keyboard
[ 12522.855] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 12522.855] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12522.855] (**) Option "xkb_rules" "evdev"
[ 12522.856] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 12522.856] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12522.856] (II) Using input driver 'evdev' for 'Video Bus'
[ 12522.856] (**) Video Bus: always reports core events
[ 12522.856] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 12522.856] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12522.856] (--) evdev: Video Bus: Found keys
[ 12522.856] (II) evdev: Video Bus: Configuring as keyboard
[ 12522.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[ 12522.856] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 12522.856] (**) Option "xkb_rules" "evdev"
[ 12522.856] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 12522.856] (II) No input driver specified, ignoring this device.
[ 12522.856] (II) This device may have been added with another device file.
[ 12522.856] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 12522.856] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12522.856] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12522.856] (**) Sleep Button: always reports core events
[ 12522.856] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12522.856] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12522.856] (--) evdev: Sleep Button: Found keys
[ 12522.856] (II) evdev: Sleep Button: Configuring as keyboard
[ 12522.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 12522.857] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 12522.857] (**) Option "xkb_rules" "evdev"
[ 12522.857] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 12522.857] (II) No input driver specified, ignoring this device.
[ 12522.857] (II) This device may have been added with another device file.
[ 12522.857] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 12522.857] (II) No input driver specified, ignoring this device.
[ 12522.857] (II) This device may have been added with another device file.
[ 12522.857] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 12522.857] (II) No input driver specified, ignoring this device.
[ 12522.857] (II) This device may have been added with another device file.
[ 12522.858] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[ 12522.858] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[ 12522.858] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 12522.858] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12522.858] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12522.858] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[ 12522.909] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12522.909] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[ 12522.909] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 12522.909] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 12522.909] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[ 12522.909] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 12522.909] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 12522.909] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 12522.909] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12522.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0001/input/input6/event5"
[ 12522.909] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[ 12522.909] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 12522.909] (**) Option "AccelerationScheme" "none"
[ 12522.909] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[ 12522.909] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 12522.909] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 12522.909] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[ 12522.909] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 12522.909] (II) No input driver specified, ignoring this device.
[ 12522.909] (II) This device may have been added with another device file.
[ 12522.910] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[ 12522.910] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 12522.910] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12522.910] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12522.910] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 12522.910] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[ 12522.910] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 12522.910] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 12522.910] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 12522.910] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 12522.910] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 12522.910] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12522.910] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0002/input/input7/event6"
[ 12522.910] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[ 12522.910] (**) Option "xkb_rules" "evdev"
[ 12522.910] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 12522.910] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[ 12522.910] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[ 12522.910] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[ 12522.910] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 12522.910] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 12522.911] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[ 12522.911] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 12522.911] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12522.911] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12522.911] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[ 12522.911] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12522.911] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 12522.911] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 12522.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0003/input/input9/event8"
[ 12522.911] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[ 12522.911] (**) Option "xkb_rules" "evdev"
[ 12522.911] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event18)
[ 12522.911] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 12522.911] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 12522.911] (**) Lenovo EasyCamera: always reports core events
[ 12522.911] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event18"
[ 12522.911] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[ 12522.911] (--) evdev: Lenovo EasyCamera: Found keys
[ 12522.911] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 12522.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event18"
[ 12522.911] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[ 12522.911] (**) Option "xkb_rules" "evdev"
[ 12522.912] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 12522.912] (II) No input driver specified, ignoring this device.
[ 12522.912] (II) This device may have been added with another device file.
[ 12522.912] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 12522.912] (II) No input driver specified, ignoring this device.
[ 12522.912] (II) This device may have been added with another device file.
[ 12522.912] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 12522.912] (II) No input driver specified, ignoring this device.
[ 12522.912] (II) This device may have been added with another device file.
[ 12522.912] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 12522.912] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12522.912] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12522.912] (**) AT Translated Set 2 keyboard: always reports core events
[ 12522.912] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 12522.912] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12522.912] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12522.912] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12522.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[ 12522.912] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 12522.912] (**) Option "xkb_rules" "evdev"
[ 12522.913] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 12522.913] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12522.913] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 12522.913] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 12522.913] (II) LoadModule: "synaptics"
[ 12522.913] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 12522.913] (II) Module synaptics: vendor="X.Org Foundation"
[ 12522.913] compiled for 1.18.4, module version = 1.8.3
[ 12522.913] Module class: X.Org XInput Driver
[ 12522.913] ABI class: X.Org XInput driver, version 22.1
[ 12522.913] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 12522.913] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 12522.913] (**) Option "Device" "/dev/input/event10"
[ 12522.938] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[ 12522.938] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[ 12522.938] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 12522.938] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 12522.938] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 12522.938] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 12522.950] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 12522.950] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 12522.950] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12522.950] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 12522.950] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 12522.950] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 12522.950] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12522.950] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 12522.950] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 12522.950] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 12522.950] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[ 12522.950] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 12522.951] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 12522.951] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 12522.951] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 12522.951] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 12522.951] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 12522.951] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12522.951] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[ 12522.951] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[ 12522.951] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 12522.951] (**) Option "AccelerationScheme" "none"
[ 12522.951] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 12522.951] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 12522.951] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 12522.951] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[ 12522.951] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 12522.951] (II) No input driver specified, ignoring this device.
[ 12522.951] (II) This device may have been added with another device file.
[ 12522.951] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 12522.951] (II) No input driver specified, ignoring this device.
[ 12522.951] (II) This device may have been added with another device file.
[ 12555.182] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) UnloadModule: "synaptics"
[ 12555.183] (II) evdev: AT Translated Set 2 keyboard: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Lenovo EasyCamera: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Sleep Button: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Video Bus: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Video Bus: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.183] (II) evdev: Power Button: Close
[ 12555.183] (II) UnloadModule: "evdev"
[ 12555.218] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 12555.221] (II) Server terminated successfully (0). Closing log file. |
With that setup I only see an underscore in the upper left corner of my screen. Nothing else happens.
I also noticed that part in the log where it says that it can't load GLX module and that the module is provided by X.org, not Nvidia. I guess it's that bug.
So, I renamed /usr/lib64/xorg/modules/extensions/libglx.so to libglx.so.backup and copied another libglx.so from /usr/lib64/opengl/nvidia/extensions/ to /usr/lib64/xorg/modules/extensions/libglx.so.
Here's the log of what happens with that setup:
Sorry I have to divide it into a few parts because of forum's post's length limits
Last edited by Frustration on Tue Sep 27, 2016 3:05 pm; edited 3 times in total |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Tue Sep 27, 2016 2:26 pm Post subject: Part2 |
|
|
cat /var/log/Xorg.0.log if eselect opengl set nvidia, using xorg.conf, Nvidia's libglx.so:
Code: | [ 11684.754]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 11684.758] X Protocol Version 11, Revision 0
[ 11684.760] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[ 11684.762] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[ 11684.762] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[ 11684.766] Build Date: 27 September 2016 12:27:05PM
[ 11684.768]
[ 11684.769] Current version of pixman: 0.34.0
[ 11684.772] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11684.772] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11684.779] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 27 16:27:00 2016
[ 11684.780] (==) Using config file: "/etc/X11/xorg.conf"
[ 11684.782] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11684.783] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11684.783] (==) No Layout section. Using the first Screen section.
[ 11684.783] (==) No screen section available. Using defaults.
[ 11684.783] (**) |-->Screen "Default Screen Section" (0)
[ 11684.783] (**) | |-->Monitor "<default monitor>"
[ 11684.783] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11684.783] (**) | |-->Device "nvidia"
[ 11684.783] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11684.783] (==) Automatically adding devices
[ 11684.783] (==) Automatically enabling devices
[ 11684.783] (==) Automatically adding GPU devices
[ 11684.784] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11684.784] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11684.784] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/opengl/nvidia,/usr/lib64/xorg/modules"
[ 11684.784] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11684.784] (II) Loader magic: 0x811c80
[ 11684.784] (II) Module ABI versions:
[ 11684.784] X.Org ANSI C Emulation: 0.4
[ 11684.784] X.Org Video Driver: 20.0
[ 11684.784] X.Org XInput driver : 22.1
[ 11684.784] X.Org Server Extension : 9.0
[ 11684.784] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11684.784] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11684.787] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[ 11684.787] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[ 11684.787] (II) LoadModule: "glx"
[ 11684.787] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 11684.791] (II) Module glx: vendor="NVIDIA Corporation"
[ 11684.791] compiled for 4.0.2, module version = 1.0.0
[ 11684.791] Module class: X.Org Server Extension
[ 11684.791] (II) NVIDIA GLX Module 370.28 Thu Sep 1 19:14:30 PDT 2016
[ 11684.791] (II) LoadModule: "nvidia"
[ 11684.791] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 11684.792] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11684.792] compiled for 4.0.2, module version = 1.0.0
[ 11684.792] Module class: X.Org Video Driver
[ 11684.792] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[ 11684.792] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11684.792] (--) using VT number 7
[ 11684.797] (II) Loading sub module "fb"
[ 11684.797] (II) LoadModule: "fb"
[ 11684.797] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 11684.798] (II) Module fb: vendor="X.Org Foundation"
[ 11684.798] compiled for 1.18.4, module version = 1.0.0
[ 11684.798] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11684.798] (II) Loading sub module "wfb"
[ 11684.798] (II) LoadModule: "wfb"
[ 11684.798] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 11684.798] (II) Module wfb: vendor="X.Org Foundation"
[ 11684.798] compiled for 1.18.4, module version = 1.0.0
[ 11684.798] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11684.798] (II) Loading sub module "ramdac"
[ 11684.798] (II) LoadModule: "ramdac"
[ 11684.798] (II) Module "ramdac" already built-in
[ 11684.798] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11684.798] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11684.798] (==) NVIDIA(0): RGB weight 888
[ 11684.798] (==) NVIDIA(0): Default visual is TrueColor
[ 11684.798] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11684.799] (**) NVIDIA(0): Enabling 2D acceleration
[ 11684.955] (II) NVIDIA(0): NVIDIA GPU GeForce 840M (GM108-A) at PCI:4:0:0 (GPU-0)
[ 11684.955] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 11684.955] (--) NVIDIA(0): VideoBIOS: 82.08.14.00.6f
[ 11684.955] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 11684.955] (II) NVIDIA(0): Validated MetaModes:
[ 11684.955] (II) NVIDIA(0): "NULL"
[ 11684.955] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 11684.955] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 11684.955] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 11684.955] (--) Depth 24 pixmap format is 32 bpp
[ 11684.956] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 11684.956] (II) NVIDIA: access.
[ 11684.982] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 11684.982] (II) NVIDIA(0): Setting mode "NULL"
[ 11684.987] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11684.987] (==) NVIDIA(0): Backing store enabled
[ 11684.987] (==) NVIDIA(0): Silken mouse enabled
[ 11684.987] (==) NVIDIA(0): DPMS enabled
[ 11684.987] (II) Loading sub module "dri2"
[ 11684.987] (II) LoadModule: "dri2"
[ 11684.987] (II) Module "dri2" already built-in
[ 11684.987] (II) NVIDIA(0): [DRI2] Setup complete
[ 11684.987] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11684.987] (--) RandR disabled
[ 11684.987] (II) Initializing extension GLX
[ 11684.987] (II) Indirect GLX disabled.
[ 11685.068] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11685.068] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11685.068] (II) LoadModule: "evdev"
[ 11685.068] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 11685.069] (II) Module evdev: vendor="X.Org Foundation"
[ 11685.069] compiled for 1.18.4, module version = 2.10.3
[ 11685.069] Module class: X.Org XInput Driver
[ 11685.069] ABI class: X.Org XInput driver, version 22.1
[ 11685.069] (II) Using input driver 'evdev' for 'Power Button'
[ 11685.069] (**) Power Button: always reports core events
[ 11685.069] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 11685.069] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11685.069] (--) evdev: Power Button: Found keys
[ 11685.069] (II) evdev: Power Button: Configuring as keyboard
[ 11685.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 11685.069] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11685.069] (**) Option "xkb_rules" "evdev"
[ 11685.069] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 11685.069] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11685.069] (II) Using input driver 'evdev' for 'Video Bus'
[ 11685.069] (**) Video Bus: always reports core events
[ 11685.069] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 11685.069] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11685.069] (--) evdev: Video Bus: Found keys
[ 11685.069] (II) evdev: Video Bus: Configuring as keyboard
[ 11685.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 11685.069] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11685.069] (**) Option "xkb_rules" "evdev"
[ 11685.070] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 11685.070] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11685.070] (II) Using input driver 'evdev' for 'Video Bus'
[ 11685.070] (**) Video Bus: always reports core events
[ 11685.070] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 11685.070] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11685.070] (--) evdev: Video Bus: Found keys
[ 11685.070] (II) evdev: Video Bus: Configuring as keyboard
[ 11685.070] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[ 11685.070] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 11685.070] (**) Option "xkb_rules" "evdev"
[ 11685.070] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 11685.070] (II) No input driver specified, ignoring this device.
[ 11685.070] (II) This device may have been added with another device file.
[ 11685.070] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 11685.070] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11685.070] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11685.070] (**) Sleep Button: always reports core events
[ 11685.070] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 11685.070] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 11685.070] (--) evdev: Sleep Button: Found keys
[ 11685.070] (II) evdev: Sleep Button: Configuring as keyboard
[ 11685.070] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 11685.070] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11685.070] (**) Option "xkb_rules" "evdev"
[ 11685.071] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 11685.071] (II) No input driver specified, ignoring this device.
[ 11685.071] (II) This device may have been added with another device file.
[ 11685.071] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 11685.071] (II) No input driver specified, ignoring this device.
[ 11685.071] (II) This device may have been added with another device file.
[ 11685.071] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 11685.071] (II) No input driver specified, ignoring this device.
[ 11685.071] (II) This device may have been added with another device file.
[ 11685.072] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[ 11685.072] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[ 11685.072] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 11685.072] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11685.072] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11685.072] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[ 11685.123] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11685.123] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[ 11685.123] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 11685.123] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 11685.123] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[ 11685.123] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 11685.123] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 11685.123] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 11685.123] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11685.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0001/input/input6/event5"
[ 11685.123] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[ 11685.123] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 11685.123] (**) Option "AccelerationScheme" "none"
[ 11685.123] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[ 11685.123] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 11685.123] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 11685.123] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[ 11685.123] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 11685.123] (II) No input driver specified, ignoring this device.
[ 11685.123] (II) This device may have been added with another device file.
[ 11685.124] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[ 11685.124] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 11685.124] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11685.124] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11685.124] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 11685.124] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[ 11685.124] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 11685.124] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 11685.124] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 11685.124] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 11685.124] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 11685.124] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11685.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0002/input/input7/event6"
[ 11685.124] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[ 11685.124] (**) Option "xkb_rules" "evdev"
[ 11685.124] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 11685.124] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[ 11685.124] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[ 11685.124] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[ 11685.124] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 11685.124] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 11685.124] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[ 11685.125] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 11685.125] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11685.125] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11685.125] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[ 11685.125] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11685.125] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 11685.125] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 11685.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0003/input/input9/event8"
[ 11685.125] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[ 11685.125] (**) Option "xkb_rules" "evdev"
[ 11685.125] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event18)
[ 11685.125] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 11685.125] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 11685.125] (**) Lenovo EasyCamera: always reports core events
[ 11685.125] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event18"
[ 11685.125] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[ 11685.125] (--) evdev: Lenovo EasyCamera: Found keys
[ 11685.125] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 11685.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event18"
[ 11685.125] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[ 11685.125] (**) Option "xkb_rules" "evdev"
[ 11685.126] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 11685.126] (II) No input driver specified, ignoring this device.
[ 11685.126] (II) This device may have been added with another device file.
[ 11685.126] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 11685.126] (II) No input driver specified, ignoring this device.
[ 11685.126] (II) This device may have been added with another device file.
[ 11685.126] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 11685.126] (II) No input driver specified, ignoring this device.
[ 11685.126] (II) This device may have been added with another device file.
[ 11685.126] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 11685.126] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11685.126] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11685.126] (**) AT Translated Set 2 keyboard: always reports core events
[ 11685.126] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 11685.126] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 11685.126] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 11685.126] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 11685.126] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[ 11685.126] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 11685.126] (**) Option "xkb_rules" "evdev"
[ 11685.127] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 11685.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 11685.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 11685.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 11685.127] (II) LoadModule: "synaptics"
[ 11685.127] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 11685.127] (II) Module synaptics: vendor="X.Org Foundation"
[ 11685.127] compiled for 1.18.4, module version = 1.8.3
[ 11685.127] Module class: X.Org XInput Driver
[ 11685.127] ABI class: X.Org XInput driver, version 22.1
[ 11685.127] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 11685.127] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 11685.127] (**) Option "Device" "/dev/input/event10"
[ 11685.150] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[ 11685.150] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[ 11685.150] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 11685.150] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 11685.150] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 11685.150] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 11685.162] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 11685.162] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 11685.162] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 11685.162] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 11685.162] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 11685.162] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 11685.162] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 11685.162] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 11685.162] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 11685.162] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 11685.162] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[ 11685.163] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 11685.163] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 11685.163] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 11685.163] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 11685.163] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 11685.163] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 11685.163] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11685.163] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[ 11685.163] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[ 11685.163] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 11685.163] (**) Option "AccelerationScheme" "none"
[ 11685.163] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 11685.163] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 11685.163] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 11685.163] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[ 11685.163] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 11685.163] (II) No input driver specified, ignoring this device.
[ 11685.163] (II) This device may have been added with another device file.
[ 11685.163] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 11685.163] (II) No input driver specified, ignoring this device.
[ 11685.163] (II) This device may have been added with another device file.
[ 11707.002] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) UnloadModule: "synaptics"
[ 11707.002] (II) evdev: AT Translated Set 2 keyboard: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Lenovo EasyCamera: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Sleep Button: Close
[ 11707.002] (II) UnloadModule: "evdev"
[ 11707.002] (II) evdev: Video Bus: Close
[ 11707.003] (II) UnloadModule: "evdev"
[ 11707.003] (II) evdev: Video Bus: Close
[ 11707.003] (II) UnloadModule: "evdev"
[ 11707.003] (II) evdev: Power Button: Close
[ 11707.003] (II) UnloadModule: "evdev"
[ 11707.010] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 11707.020] (II) Server terminated successfully (0). Closing log file. |
The same result, just an underscore in the corner.
Last edited by Frustration on Tue Sep 27, 2016 3:05 pm; edited 1 time in total |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Tue Sep 27, 2016 2:30 pm Post subject: Part3 |
|
|
Then, I've tried the same thing but without xorg.conf:
cat /var/log/Xorg.0.log if eselect opengl set nvidia, not using xorg.conf, Nvidia's libglx.so
Code: |
[ 11772.953]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 11772.957] X Protocol Version 11, Revision 0
[ 11772.958] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[ 11772.959] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[ 11772.959] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[ 11772.963] Build Date: 27 September 2016 12:27:05PM
[ 11772.965]
[ 11772.966] Current version of pixman: 0.34.0
[ 11772.969] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11772.969] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11772.974] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 27 16:28:28 2016
[ 11772.975] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11772.977] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11772.977] (==) No Layout section. Using the first Screen section.
[ 11772.977] (==) No screen section available. Using defaults.
[ 11772.977] (**) |-->Screen "Default Screen Section" (0)
[ 11772.977] (**) | |-->Monitor "<default monitor>"
[ 11772.977] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11772.977] (==) Automatically adding devices
[ 11772.977] (==) Automatically enabling devices
[ 11772.977] (==) Automatically adding GPU devices
[ 11772.977] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11772.977] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11772.977] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/opengl/nvidia,/usr/lib64/xorg/modules"
[ 11772.977] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11772.977] (II) Loader magic: 0x811c80
[ 11772.977] (II) Module ABI versions:
[ 11772.977] X.Org ANSI C Emulation: 0.4
[ 11772.977] X.Org Video Driver: 20.0
[ 11772.977] X.Org XInput driver : 22.1
[ 11772.977] X.Org Server Extension : 9.0
[ 11772.977] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11772.978] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11772.980] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[ 11772.980] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[ 11772.980] (II) LoadModule: "glx"
[ 11772.981] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 11772.984] (II) Module glx: vendor="NVIDIA Corporation"
[ 11772.984] compiled for 4.0.2, module version = 1.0.0
[ 11772.984] Module class: X.Org Server Extension
[ 11772.984] (II) NVIDIA GLX Module 370.28 Thu Sep 1 19:14:30 PDT 2016
[ 11772.984] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 11772.984] loading driver: nvidia
[ 11772.984] (==) Matched intel as autoconfigured driver 0
[ 11772.984] (==) Matched nvidia as autoconfigured driver 1
[ 11772.984] (==) Matched nouveau as autoconfigured driver 2
[ 11772.984] (==) Matched nv as autoconfigured driver 3
[ 11772.984] (==) Matched intel as autoconfigured driver 4
[ 11772.984] (==) Matched modesetting as autoconfigured driver 5
[ 11772.984] (==) Matched fbdev as autoconfigured driver 6
[ 11772.984] (==) Matched vesa as autoconfigured driver 7
[ 11772.984] (==) Assigned the driver to the xf86ConfigLayout
[ 11772.984] (II) LoadModule: "intel"
[ 11772.985] (WW) Warning, couldn't open module intel
[ 11772.985] (II) UnloadModule: "intel"
[ 11772.985] (II) Unloading intel
[ 11772.985] (EE) Failed to load module "intel" (module does not exist, 0)
[ 11772.985] (II) LoadModule: "nvidia"
[ 11772.985] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 11772.985] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11772.985] compiled for 4.0.2, module version = 1.0.0
[ 11772.985] Module class: X.Org Video Driver
[ 11772.985] (II) LoadModule: "nouveau"
[ 11772.986] (WW) Warning, couldn't open module nouveau
[ 11772.986] (II) UnloadModule: "nouveau"
[ 11772.986] (II) Unloading nouveau
[ 11772.986] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11772.986] (II) LoadModule: "nv"
[ 11772.986] (WW) Warning, couldn't open module nv
[ 11772.986] (II) UnloadModule: "nv"
[ 11772.986] (II) Unloading nv
[ 11772.986] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11772.986] (II) LoadModule: "modesetting"
[ 11772.986] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 11772.986] (II) Module modesetting: vendor="X.Org Foundation"
[ 11772.986] compiled for 1.18.4, module version = 1.18.4
[ 11772.986] Module class: X.Org Video Driver
[ 11772.986] ABI class: X.Org Video Driver, version 20.0
[ 11772.986] (II) LoadModule: "fbdev"
[ 11772.986] (WW) Warning, couldn't open module fbdev
[ 11772.986] (II) UnloadModule: "fbdev"
[ 11772.986] (II) Unloading fbdev
[ 11772.986] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11772.986] (II) LoadModule: "vesa"
[ 11772.987] (WW) Warning, couldn't open module vesa
[ 11772.987] (II) UnloadModule: "vesa"
[ 11772.987] (II) Unloading vesa
[ 11772.987] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11772.987] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[ 11772.987] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11772.987] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11772.987] (--) using VT number 7
[ 11772.995] (II) modeset(0): using drv /dev/dri/card0
[ 11772.995] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11772.995] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 11772.995] (==) modeset(0): RGB weight 888
[ 11772.995] (==) modeset(0): Default visual is TrueColor
[ 11772.995] (II) Loading sub module "glamoregl"
[ 11772.995] (II) LoadModule: "glamoregl"
[ 11772.995] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 11772.998] (II) Module glamoregl: vendor="X.Org Foundation"
[ 11772.998] compiled for 1.18.4, module version = 1.0.0
[ 11772.998] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11772.998] (II) glamor: OpenGL accelerated X.org driver based.
[ 11773.009] (EE) modeset(0): eglInitialize() failed
[ 11773.009] (EE) modeset(0): glamor initialization failed
[ 11773.009] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[ 11773.009] (II) modeset(0): Output eDP-1 has no monitor section
[ 11773.098] (II) modeset(0): Output HDMI-1 has no monitor section
[ 11773.098] (II) modeset(0): EDID for output eDP-1
[ 11773.098] (II) modeset(0): Manufacturer: BOE Model: 611 Serial#: 0
[ 11773.098] (II) modeset(0): Year: 2014 Week: 1
[ 11773.098] (II) modeset(0): EDID Version: 1.4
[ 11773.098] (II) modeset(0): Digital Display Input
[ 11773.098] (II) modeset(0): 6 bits per channel
[ 11773.098] (II) modeset(0): Digital interface is DisplayPort
[ 11773.098] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 11773.098] (II) modeset(0): Gamma: 2.20
[ 11773.098] (II) modeset(0): No DPMS capabilities specified
[ 11773.098] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 11773.098] (II) modeset(0): First detailed timing is preferred mode
[ 11773.098] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 11773.098] (II) modeset(0): redX: 0.592 redY: 0.347 greenX: 0.328 greenY: 0.570
[ 11773.098] (II) modeset(0): blueX: 0.150 blueY: 0.114 whiteX: 0.312 whiteY: 0.328
[ 11773.098] (II) modeset(0): Manufacturer's mask: 0
[ 11773.098] (II) modeset(0): Supported detailed timing:
[ 11773.098] (II) modeset(0): clock: 141.4 MHz Image Size: 344 x 193 mm
[ 11773.098] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2142 h_border: 0
[ 11773.098] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1100 v_border: 0
[ 11773.098] (II) modeset(0): BOE HF
[ 11773.098] (II) modeset(0): HB156FH1-401
[ 11773.098] (II) modeset(0): EDID (in hex):
[ 11773.098] (II) modeset(0): 00ffffffffffff0009e5110600000000
[ 11773.098] (II) modeset(0): 011801049522137802b0909758549226
[ 11773.098] (II) modeset(0): 1d505400000001010101010101010101
[ 11773.098] (II) modeset(0): 0101010101013c3780de703814403020
[ 11773.098] (II) modeset(0): 360058c11000001a0000000000000000
[ 11773.098] (II) modeset(0): 00000000000000000000000000fe0042
[ 11773.098] (II) modeset(0): 4f452048460a202020202020000000fe
[ 11773.098] (II) modeset(0): 0048423135364648312d3430310a0002
[ 11773.099] (II) modeset(0): Printing probed modes for output eDP-1
[ 11773.099] (II) modeset(0): Modeline "1920x1080"x60.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 11773.099] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 11773.099] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 11773.099] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 11773.099] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 11773.099] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 11773.099] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 11773.099] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 11773.099] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 11773.099] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 11773.099] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 11773.099] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 11773.099] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 11773.099] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 11773.099] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 11773.187] (II) modeset(0): EDID for output HDMI-1
[ 11773.187] (II) modeset(0): Output eDP-1 connected
[ 11773.187] (II) modeset(0): Output HDMI-1 disconnected
[ 11773.187] (II) modeset(0): Using exact sizes for initial modes
[ 11773.187] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 11773.187] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11773.187] (==) modeset(0): DPI set to (96, 96)
[ 11773.187] (II) Loading sub module "fb"
[ 11773.187] (II) LoadModule: "fb"
[ 11773.187] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 11773.187] (II) Module fb: vendor="X.Org Foundation"
[ 11773.187] compiled for 1.18.4, module version = 1.0.0
[ 11773.187] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11773.187] (II) Loading sub module "shadow"
[ 11773.187] (II) LoadModule: "shadow"
[ 11773.187] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 11773.187] (II) Module shadow: vendor="X.Org Foundation"
[ 11773.187] compiled for 1.18.4, module version = 1.1.0
[ 11773.187] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11773.187] (==) Depth 24 pixmap format is 32 bpp
[ 11773.187] (==) modeset(0): Backing store enabled
[ 11773.187] (==) modeset(0): Silken mouse enabled
[ 11773.187] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11773.187] (==) modeset(0): DPMS enabled
[ 11773.203] (--) RandR disabled
[ 11773.203] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 11773.204] (II) modeset(0): Damage tracking initialized
[ 11773.204] (II) modeset(0): Setting screen physical size to 508 x 285
[ 11773.282] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11773.282] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11773.282] (II) LoadModule: "evdev"
[ 11773.282] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 11773.283] (II) Module evdev: vendor="X.Org Foundation"
[ 11773.283] compiled for 1.18.4, module version = 2.10.3
[ 11773.283] Module class: X.Org XInput Driver
[ 11773.283] ABI class: X.Org XInput driver, version 22.1
[ 11773.283] (II) Using input driver 'evdev' for 'Power Button'
[ 11773.283] (**) Power Button: always reports core events
[ 11773.283] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 11773.283] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11773.283] (--) evdev: Power Button: Found keys
[ 11773.283] (II) evdev: Power Button: Configuring as keyboard
[ 11773.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 11773.283] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11773.283] (**) Option "xkb_rules" "evdev"
[ 11773.283] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 11773.283] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11773.283] (II) Using input driver 'evdev' for 'Video Bus'
[ 11773.283] (**) Video Bus: always reports core events
[ 11773.283] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 11773.283] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11773.283] (--) evdev: Video Bus: Found keys
[ 11773.283] (II) evdev: Video Bus: Configuring as keyboard
[ 11773.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 11773.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11773.283] (**) Option "xkb_rules" "evdev"
[ 11773.284] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 11773.284] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11773.284] (II) Using input driver 'evdev' for 'Video Bus'
[ 11773.284] (**) Video Bus: always reports core events
[ 11773.284] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 11773.284] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11773.284] (--) evdev: Video Bus: Found keys
[ 11773.284] (II) evdev: Video Bus: Configuring as keyboard
[ 11773.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[ 11773.284] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 11773.284] (**) Option "xkb_rules" "evdev"
[ 11773.284] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 11773.284] (II) No input driver specified, ignoring this device.
[ 11773.284] (II) This device may have been added with another device file.
[ 11773.284] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 11773.284] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11773.284] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11773.284] (**) Sleep Button: always reports core events
[ 11773.284] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 11773.284] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 11773.284] (--) evdev: Sleep Button: Found keys
[ 11773.284] (II) evdev: Sleep Button: Configuring as keyboard
[ 11773.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 11773.284] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 11773.284] (**) Option "xkb_rules" "evdev"
[ 11773.285] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 11773.285] (II) No input driver specified, ignoring this device.
[ 11773.285] (II) This device may have been added with another device file.
[ 11773.285] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 11773.285] (II) No input driver specified, ignoring this device.
[ 11773.285] (II) This device may have been added with another device file.
[ 11773.285] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 11773.285] (II) No input driver specified, ignoring this device.
[ 11773.285] (II) This device may have been added with another device file.
[ 11773.285] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[ 11773.285] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[ 11773.285] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 11773.286] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11773.286] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11773.286] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[ 11773.337] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11773.337] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[ 11773.337] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 11773.337] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 11773.337] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[ 11773.337] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 11773.337] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 11773.337] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 11773.337] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11773.337] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0001/input/input6/event5"
[ 11773.337] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[ 11773.337] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 11773.337] (**) Option "AccelerationScheme" "none"
[ 11773.337] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[ 11773.337] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 11773.337] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 11773.337] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[ 11773.337] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 11773.337] (II) No input driver specified, ignoring this device.
[ 11773.337] (II) This device may have been added with another device file.
[ 11773.338] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[ 11773.338] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 11773.338] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11773.338] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11773.338] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 11773.338] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[ 11773.338] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 11773.338] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 11773.338] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 11773.338] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 11773.338] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 11773.338] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11773.338] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0002/input/input7/event6"
[ 11773.338] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[ 11773.338] (**) Option "xkb_rules" "evdev"
[ 11773.338] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 11773.338] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[ 11773.338] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[ 11773.338] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[ 11773.338] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 11773.338] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 11773.338] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[ 11773.339] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 11773.339] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 11773.339] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 11773.339] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[ 11773.339] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 11773.339] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 11773.339] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 11773.339] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0003/input/input9/event8"
[ 11773.339] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[ 11773.339] (**) Option "xkb_rules" "evdev"
[ 11773.339] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event18)
[ 11773.339] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 11773.339] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 11773.339] (**) Lenovo EasyCamera: always reports core events
[ 11773.339] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event18"
[ 11773.339] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[ 11773.339] (--) evdev: Lenovo EasyCamera: Found keys
[ 11773.339] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 11773.339] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event18"
[ 11773.339] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[ 11773.339] (**) Option "xkb_rules" "evdev"
[ 11773.340] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 11773.340] (II) No input driver specified, ignoring this device.
[ 11773.340] (II) This device may have been added with another device file.
[ 11773.340] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 11773.340] (II) No input driver specified, ignoring this device.
[ 11773.340] (II) This device may have been added with another device file.
[ 11773.340] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 11773.340] (II) No input driver specified, ignoring this device.
[ 11773.340] (II) This device may have been added with another device file.
[ 11773.340] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 11773.340] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11773.340] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11773.340] (**) AT Translated Set 2 keyboard: always reports core events
[ 11773.340] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 11773.340] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 11773.340] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 11773.340] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 11773.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[ 11773.340] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 11773.340] (**) Option "xkb_rules" "evdev"
[ 11773.341] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 11773.341] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 11773.341] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 11773.341] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 11773.341] (II) LoadModule: "synaptics"
[ 11773.341] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 11773.341] (II) Module synaptics: vendor="X.Org Foundation"
[ 11773.341] compiled for 1.18.4, module version = 1.8.3
[ 11773.341] Module class: X.Org XInput Driver
[ 11773.341] ABI class: X.Org XInput driver, version 22.1
[ 11773.341] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 11773.341] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 11773.341] (**) Option "Device" "/dev/input/event10"
[ 11773.371] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[ 11773.371] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[ 11773.371] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 11773.371] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 11773.371] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 11773.371] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 11773.383] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 11773.383] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 11773.383] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 11773.383] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 11773.383] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 11773.383] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 11773.383] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 11773.383] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 11773.383] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 11773.383] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 11773.383] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[ 11773.383] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 11773.384] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 11773.384] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 11773.384] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 11773.384] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 11773.384] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 11773.384] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11773.384] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[ 11773.384] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[ 11773.384] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 11773.384] (**) Option "AccelerationScheme" "none"
[ 11773.384] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 11773.384] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 11773.384] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 11773.384] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[ 11773.384] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 11773.384] (II) No input driver specified, ignoring this device.
[ 11773.384] (II) This device may have been added with another device file.
[ 11773.384] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 11773.384] (II) No input driver specified, ignoring this device.
[ 11773.384] (II) This device may have been added with another device file.
[ 11774.274] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 11774.274] (II) modeset(0): Printing DDC gathered Modelines:
[ 11774.274] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 11775.067] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 11775.067] (II) modeset(0): Printing DDC gathered Modelines:
[ 11775.067] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 11861.759] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Close
[ 11861.759] (II) UnloadModule: "evdev"
[ 11861.759] (II) UnloadModule: "synaptics"
[ 11861.760] (II) evdev: AT Translated Set 2 keyboard: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Lenovo EasyCamera: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Sleep Button: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Video Bus: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Video Bus: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.760] (II) evdev: Power Button: Close
[ 11861.760] (II) UnloadModule: "evdev"
[ 11861.796] (II) Server terminated successfully (0). Closing log file. |
In this scenario I run into this error:
Code: |
Plasma is unable to start as it could not correctly use OpenGL 2.
Please check that your graphic drivers are set up correctly. |
|
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Tue Sep 27, 2016 2:32 pm Post subject: Part4 |
|
|
and so then I've tried without xorg.conf again, but with X.org's libglx.so this time.
cat /var/log/Xorg.0.log if eselect opengl set nvidia, not using xorg.conf, X.org's libglx.so
Code: |
[ 12037.002]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 12037.006] X Protocol Version 11, Revision 0
[ 12037.008] Build Operating System: Linux 4.4.6-gentoo x86_64 Gentoo
[ 12037.009] Current Operating System: Linux emerge 4.4.6-gentoo #1 SMP Sun Sep 4 15:34:01 UTC 2016 x86_64
[ 12037.009] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.4.6-gentoo ro
[ 12037.014] Build Date: 27 September 2016 12:27:05PM
[ 12037.015]
[ 12037.017] Current version of pixman: 0.34.0
[ 12037.020] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12037.020] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12037.026] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 27 16:32:52 2016
[ 12037.028] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12037.029] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12037.030] (==) No Layout section. Using the first Screen section.
[ 12037.030] (==) No screen section available. Using defaults.
[ 12037.030] (**) |-->Screen "Default Screen Section" (0)
[ 12037.030] (**) | |-->Monitor "<default monitor>"
[ 12037.030] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12037.030] (==) Automatically adding devices
[ 12037.030] (==) Automatically enabling devices
[ 12037.030] (==) Automatically adding GPU devices
[ 12037.030] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12037.030] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12037.030] (**) ModulePath set to "/usr/lib64/xorg/modules,/usr/lib64/opengl/nvidia,/usr/lib64/xorg/modules"
[ 12037.030] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12037.030] (II) Loader magic: 0x811c80
[ 12037.030] (II) Module ABI versions:
[ 12037.030] X.Org ANSI C Emulation: 0.4
[ 12037.030] X.Org Video Driver: 20.0
[ 12037.030] X.Org XInput driver : 22.1
[ 12037.030] X.Org Server Extension : 9.0
[ 12037.030] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12037.030] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12037.031] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:3814 rev 11, Mem @ 0xf3000000/4194304, 0xd0000000/268435456, I/O @ 0x00006000/64
[ 12037.031] (--) PCI: (0:4:0:0) 10de:1341:17aa:381a rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
[ 12037.031] (II) LoadModule: "glx"
[ 12037.031] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 12037.032] (II) Module glx: vendor="X.Org Foundation"
[ 12037.032] compiled for 1.18.4, module version = 1.0.0
[ 12037.032] ABI class: X.Org Server Extension, version 9.0
[ 12037.032] (==) AIGLX enabled
[ 12037.032] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 12037.032] loading driver: nvidia
[ 12037.032] (==) Matched intel as autoconfigured driver 0
[ 12037.032] (==) Matched nvidia as autoconfigured driver 1
[ 12037.032] (==) Matched nouveau as autoconfigured driver 2
[ 12037.032] (==) Matched nv as autoconfigured driver 3
[ 12037.032] (==) Matched intel as autoconfigured driver 4
[ 12037.032] (==) Matched modesetting as autoconfigured driver 5
[ 12037.032] (==) Matched fbdev as autoconfigured driver 6
[ 12037.032] (==) Matched vesa as autoconfigured driver 7
[ 12037.032] (==) Assigned the driver to the xf86ConfigLayout
[ 12037.032] (II) LoadModule: "intel"
[ 12037.033] (WW) Warning, couldn't open module intel
[ 12037.033] (II) UnloadModule: "intel"
[ 12037.033] (II) Unloading intel
[ 12037.033] (EE) Failed to load module "intel" (module does not exist, 0)
[ 12037.033] (II) LoadModule: "nvidia"
[ 12037.033] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 12037.033] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12037.033] compiled for 4.0.2, module version = 1.0.0
[ 12037.033] Module class: X.Org Video Driver
[ 12037.033] (II) LoadModule: "nouveau"
[ 12037.033] (WW) Warning, couldn't open module nouveau
[ 12037.033] (II) UnloadModule: "nouveau"
[ 12037.033] (II) Unloading nouveau
[ 12037.033] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 12037.033] (II) LoadModule: "nv"
[ 12037.034] (WW) Warning, couldn't open module nv
[ 12037.034] (II) UnloadModule: "nv"
[ 12037.034] (II) Unloading nv
[ 12037.034] (EE) Failed to load module "nv" (module does not exist, 0)
[ 12037.034] (II) LoadModule: "modesetting"
[ 12037.034] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 12037.034] (II) Module modesetting: vendor="X.Org Foundation"
[ 12037.034] compiled for 1.18.4, module version = 1.18.4
[ 12037.034] Module class: X.Org Video Driver
[ 12037.034] ABI class: X.Org Video Driver, version 20.0
[ 12037.034] (II) LoadModule: "fbdev"
[ 12037.034] (WW) Warning, couldn't open module fbdev
[ 12037.034] (II) UnloadModule: "fbdev"
[ 12037.034] (II) Unloading fbdev
[ 12037.034] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 12037.034] (II) LoadModule: "vesa"
[ 12037.035] (WW) Warning, couldn't open module vesa
[ 12037.035] (II) UnloadModule: "vesa"
[ 12037.035] (II) Unloading vesa
[ 12037.035] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 12037.035] (II) NVIDIA dlloader X Driver 370.28 Thu Sep 1 18:51:40 PDT 2016
[ 12037.035] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12037.035] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12037.035] (--) using VT number 7
[ 12037.042] (II) modeset(0): using drv /dev/dri/card0
[ 12037.042] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12037.042] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 12037.042] (==) modeset(0): RGB weight 888
[ 12037.042] (==) modeset(0): Default visual is TrueColor
[ 12037.042] (II) Loading sub module "glamoregl"
[ 12037.042] (II) LoadModule: "glamoregl"
[ 12037.043] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 12037.047] (II) Module glamoregl: vendor="X.Org Foundation"
[ 12037.047] compiled for 1.18.4, module version = 1.0.0
[ 12037.047] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12037.047] (II) glamor: OpenGL accelerated X.org driver based.
[ 12037.057] (EE) modeset(0): eglInitialize() failed
[ 12037.058] (EE) modeset(0): glamor initialization failed
[ 12037.058] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[ 12037.058] (II) modeset(0): Output eDP-1 has no monitor section
[ 12037.147] (II) modeset(0): Output HDMI-1 has no monitor section
[ 12037.147] (II) modeset(0): EDID for output eDP-1
[ 12037.147] (II) modeset(0): Manufacturer: BOE Model: 611 Serial#: 0
[ 12037.147] (II) modeset(0): Year: 2014 Week: 1
[ 12037.147] (II) modeset(0): EDID Version: 1.4
[ 12037.147] (II) modeset(0): Digital Display Input
[ 12037.147] (II) modeset(0): 6 bits per channel
[ 12037.147] (II) modeset(0): Digital interface is DisplayPort
[ 12037.147] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 12037.147] (II) modeset(0): Gamma: 2.20
[ 12037.147] (II) modeset(0): No DPMS capabilities specified
[ 12037.147] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 12037.147] (II) modeset(0): First detailed timing is preferred mode
[ 12037.147] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 12037.147] (II) modeset(0): redX: 0.592 redY: 0.347 greenX: 0.328 greenY: 0.570
[ 12037.147] (II) modeset(0): blueX: 0.150 blueY: 0.114 whiteX: 0.312 whiteY: 0.328
[ 12037.147] (II) modeset(0): Manufacturer's mask: 0
[ 12037.147] (II) modeset(0): Supported detailed timing:
[ 12037.147] (II) modeset(0): clock: 141.4 MHz Image Size: 344 x 193 mm
[ 12037.147] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2142 h_border: 0
[ 12037.147] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1100 v_border: 0
[ 12037.147] (II) modeset(0): BOE HF
[ 12037.147] (II) modeset(0): HB156FH1-401
[ 12037.147] (II) modeset(0): EDID (in hex):
[ 12037.147] (II) modeset(0): 00ffffffffffff0009e5110600000000
[ 12037.147] (II) modeset(0): 011801049522137802b0909758549226
[ 12037.147] (II) modeset(0): 1d505400000001010101010101010101
[ 12037.147] (II) modeset(0): 0101010101013c3780de703814403020
[ 12037.147] (II) modeset(0): 360058c11000001a0000000000000000
[ 12037.147] (II) modeset(0): 00000000000000000000000000fe0042
[ 12037.147] (II) modeset(0): 4f452048460a202020202020000000fe
[ 12037.147] (II) modeset(0): 0048423135364648312d3430310a0002
[ 12037.148] (II) modeset(0): Printing probed modes for output eDP-1
[ 12037.148] (II) modeset(0): Modeline "1920x1080"x60.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12037.148] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 12037.148] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 12037.148] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 12037.148] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 12037.148] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 12037.148] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 12037.148] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 12037.148] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 12037.148] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 12037.148] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 12037.148] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 12037.148] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 12037.148] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 12037.148] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 12037.236] (II) modeset(0): EDID for output HDMI-1
[ 12037.237] (II) modeset(0): Output eDP-1 connected
[ 12037.237] (II) modeset(0): Output HDMI-1 disconnected
[ 12037.237] (II) modeset(0): Using exact sizes for initial modes
[ 12037.237] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 12037.237] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 12037.237] (==) modeset(0): DPI set to (96, 96)
[ 12037.237] (II) Loading sub module "fb"
[ 12037.237] (II) LoadModule: "fb"
[ 12037.237] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 12037.237] (II) Module fb: vendor="X.Org Foundation"
[ 12037.237] compiled for 1.18.4, module version = 1.0.0
[ 12037.237] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12037.237] (II) Loading sub module "shadow"
[ 12037.237] (II) LoadModule: "shadow"
[ 12037.237] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 12037.237] (II) Module shadow: vendor="X.Org Foundation"
[ 12037.237] compiled for 1.18.4, module version = 1.1.0
[ 12037.237] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12037.237] (==) Depth 24 pixmap format is 32 bpp
[ 12037.237] (==) modeset(0): Backing store enabled
[ 12037.237] (==) modeset(0): Silken mouse enabled
[ 12037.237] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12037.238] (==) modeset(0): DPMS enabled
[ 12037.251] (--) RandR disabled
[ 12037.251] (II) AIGLX: Screen 0 is not DRI2 capable
[ 12037.251] (EE) AIGLX: reverting to software rendering
[ 12037.274] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12037.274] (II) AIGLX: Loaded and initialized swrast
[ 12037.274] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 12037.275] (II) modeset(0): Damage tracking initialized
[ 12037.275] (II) modeset(0): Setting screen physical size to 508 x 285
[ 12037.354] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12037.354] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12037.354] (II) LoadModule: "evdev"
[ 12037.354] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 12037.355] (II) Module evdev: vendor="X.Org Foundation"
[ 12037.355] compiled for 1.18.4, module version = 2.10.3
[ 12037.355] Module class: X.Org XInput Driver
[ 12037.355] ABI class: X.Org XInput driver, version 22.1
[ 12037.355] (II) Using input driver 'evdev' for 'Power Button'
[ 12037.355] (**) Power Button: always reports core events
[ 12037.355] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12037.355] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12037.355] (--) evdev: Power Button: Found keys
[ 12037.355] (II) evdev: Power Button: Configuring as keyboard
[ 12037.355] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 12037.355] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12037.355] (**) Option "xkb_rules" "evdev"
[ 12037.355] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 12037.355] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12037.355] (II) Using input driver 'evdev' for 'Video Bus'
[ 12037.355] (**) Video Bus: always reports core events
[ 12037.355] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 12037.355] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12037.355] (--) evdev: Video Bus: Found keys
[ 12037.355] (II) evdev: Video Bus: Configuring as keyboard
[ 12037.355] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 12037.355] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12037.355] (**) Option "xkb_rules" "evdev"
[ 12037.356] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 12037.356] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12037.356] (II) Using input driver 'evdev' for 'Video Bus'
[ 12037.356] (**) Video Bus: always reports core events
[ 12037.356] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 12037.356] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12037.356] (--) evdev: Video Bus: Found keys
[ 12037.356] (II) evdev: Video Bus: Configuring as keyboard
[ 12037.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input3/event3"
[ 12037.356] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 12037.356] (**) Option "xkb_rules" "evdev"
[ 12037.356] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 12037.356] (II) No input driver specified, ignoring this device.
[ 12037.356] (II) This device may have been added with another device file.
[ 12037.357] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 12037.357] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12037.357] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12037.357] (**) Sleep Button: always reports core events
[ 12037.357] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12037.357] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12037.357] (--) evdev: Sleep Button: Found keys
[ 12037.357] (II) evdev: Sleep Button: Configuring as keyboard
[ 12037.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 12037.357] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 12037.357] (**) Option "xkb_rules" "evdev"
[ 12037.357] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 12037.357] (II) No input driver specified, ignoring this device.
[ 12037.357] (II) This device may have been added with another device file.
[ 12037.357] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 12037.357] (II) No input driver specified, ignoring this device.
[ 12037.357] (II) This device may have been added with another device file.
[ 12037.358] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 12037.358] (II) No input driver specified, ignoring this device.
[ 12037.358] (II) This device may have been added with another device file.
[ 12037.358] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event5)
[ 12037.358] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev pointer catchall"
[ 12037.358] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 12037.358] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12037.358] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12037.358] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event5"
[ 12037.409] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12037.409] (--) evdev: Razer Razer DeathAdder Chroma: Found 9 mouse buttons
[ 12037.409] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 12037.409] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 12037.409] (--) evdev: Razer Razer DeathAdder Chroma: Found x and y relative axes
[ 12037.409] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 12037.409] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 12037.409] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 12037.409] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12037.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1532:0043.0001/input/input6/event5"
[ 12037.409] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: MOUSE, id 10)
[ 12037.409] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 12037.409] (**) Option "AccelerationScheme" "none"
[ 12037.409] (**) Razer Razer DeathAdder Chroma: (accel) selected scheme none/0
[ 12037.409] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 12037.409] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 12037.409] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/mouse0)
[ 12037.409] (**) Razer Razer DeathAdder Chroma: Applying InputClass "My Mouse"
[ 12037.409] (II) No input driver specified, ignoring this device.
[ 12037.409] (II) This device may have been added with another device file.
[ 12037.409] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event6)
[ 12037.409] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 12037.409] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12037.409] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12037.410] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event6"
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found 1 mouse buttons
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found scroll wheel(s)
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found relative axes
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: Forcing relative x/y axes to exist.
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute axes
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found absolute multitouch axes
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Fake MT device detected
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as mouse
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: Adding scrollwheel support
[ 12037.410] (**) evdev: Razer Razer DeathAdder Chroma: YAxisMapping: buttons 4 and 5
[ 12037.410] (**) evdev: Razer Razer DeathAdder Chroma: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12037.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1532:0043.0002/input/input7/event6"
[ 12037.410] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 11)
[ 12037.410] (**) Option "xkb_rules" "evdev"
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: initialized for relative axes.
[ 12037.410] (WW) evdev: Razer Razer DeathAdder Chroma: ignoring absolute axes.
[ 12037.410] (**) Razer Razer DeathAdder Chroma: (accel) keeping acceleration scheme 1
[ 12037.410] (**) Razer Razer DeathAdder Chroma: (accel) acceleration profile 0
[ 12037.410] (**) Razer Razer DeathAdder Chroma: (accel) acceleration factor: 2.000
[ 12037.410] (**) Razer Razer DeathAdder Chroma: (accel) acceleration threshold: 4
[ 12037.410] (II) config/udev: Adding input device Razer Razer DeathAdder Chroma (/dev/input/event8)
[ 12037.410] (**) Razer Razer DeathAdder Chroma: Applying InputClass "evdev keyboard catchall"
[ 12037.410] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder Chroma'
[ 12037.410] (**) Razer Razer DeathAdder Chroma: always reports core events
[ 12037.410] (**) evdev: Razer Razer DeathAdder Chroma: Device: "/dev/input/event8"
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Vendor 0x1532 Product 0x43
[ 12037.410] (--) evdev: Razer Razer DeathAdder Chroma: Found keys
[ 12037.410] (II) evdev: Razer Razer DeathAdder Chroma: Configuring as keyboard
[ 12037.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:1532:0043.0003/input/input9/event8"
[ 12037.410] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder Chroma" (type: KEYBOARD, id 12)
[ 12037.410] (**) Option "xkb_rules" "evdev"
[ 12037.411] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event18)
[ 12037.411] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 12037.411] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 12037.411] (**) Lenovo EasyCamera: always reports core events
[ 12037.411] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event18"
[ 12037.411] (--) evdev: Lenovo EasyCamera: Vendor 0xc45 Product 0x6514
[ 12037.411] (--) evdev: Lenovo EasyCamera: Found keys
[ 12037.411] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 12037.411] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event18"
[ 12037.411] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 13)
[ 12037.411] (**) Option "xkb_rules" "evdev"
[ 12037.411] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event15)
[ 12037.411] (II) No input driver specified, ignoring this device.
[ 12037.411] (II) This device may have been added with another device file.
[ 12037.412] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[ 12037.412] (II) No input driver specified, ignoring this device.
[ 12037.412] (II) This device may have been added with another device file.
[ 12037.412] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 12037.412] (II) No input driver specified, ignoring this device.
[ 12037.412] (II) This device may have been added with another device file.
[ 12037.412] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 12037.412] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12037.412] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12037.412] (**) AT Translated Set 2 keyboard: always reports core events
[ 12037.412] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 12037.412] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12037.412] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12037.412] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12037.412] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[ 12037.412] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 12037.412] (**) Option "xkb_rules" "evdev"
[ 12037.413] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 12037.413] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12037.413] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 12037.413] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 12037.413] (II) LoadModule: "synaptics"
[ 12037.413] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 12037.413] (II) Module synaptics: vendor="X.Org Foundation"
[ 12037.413] compiled for 1.18.4, module version = 1.8.3
[ 12037.413] Module class: X.Org XInput Driver
[ 12037.413] ABI class: X.Org XInput driver, version 22.1
[ 12037.413] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 12037.413] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 12037.413] (**) Option "Device" "/dev/input/event10"
[ 12037.733] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: found clickpad property
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 4095 (res 40)
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 2047 (res 71)
[ 12037.733] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report pressure, will use touch data.
[ 12037.733] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left double triple
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 255
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 12037.733] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 12037.733] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 12037.733] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 12037.745] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 12037.745] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 12037.745] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12037.745] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 12037.745] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.044
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 12037.745] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 12037.745] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12037.745] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event9)
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 12037.745] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 12037.745] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 12037.745] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event9"
[ 12037.746] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 12037.746] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 12037.746] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 12037.746] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 12037.746] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 12037.746] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 12037.746] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12037.746] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event9"
[ 12037.746] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 16)
[ 12037.746] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 12037.746] (**) Option "AccelerationScheme" "none"
[ 12037.746] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) selected scheme none/0
[ 12037.746] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 12037.746] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 12037.746] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse1)
[ 12037.746] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "My Mouse"
[ 12037.746] (II) No input driver specified, ignoring this device.
[ 12037.746] (II) This device may have been added with another device file.
[ 12037.746] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 12037.746] (II) No input driver specified, ignoring this device.
[ 12037.746] (II) This device may have been added with another device file.
[ 12038.516] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12038.516] (II) modeset(0): Printing DDC gathered Modelines:
[ 12038.516] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12039.162] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12039.162] (II) modeset(0): Printing DDC gathered Modelines:
[ 12039.162] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12041.631] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12041.631] (II) modeset(0): Printing DDC gathered Modelines:
[ 12041.631] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12044.314] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12044.314] (II) modeset(0): Printing DDC gathered Modelines:
[ 12044.314] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12046.654] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12046.654] (II) modeset(0): Printing DDC gathered Modelines:
[ 12046.654] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12118.187] (II) modeset(0): EDID vendor "BOE", prod id 1553
[ 12118.187] (II) modeset(0): Printing DDC gathered Modelines:
[ 12118.187] (II) modeset(0): Modeline "1920x1080"x0.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[ 12118.330] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 12152.484] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) UnloadModule: "synaptics"
[ 12152.484] (II) evdev: AT Translated Set 2 keyboard: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Lenovo EasyCamera: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Razer Razer DeathAdder Chroma: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Sleep Button: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Video Bus: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Video Bus: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.484] (II) evdev: Power Button: Close
[ 12152.484] (II) UnloadModule: "evdev"
[ 12152.514] (II) Server terminated successfully (0). Closing log file. |
In this case, when I run startx, the only thing I see is a message by krunner saying that it has crashed. Here's the crash report which it provides:
Code: |
Application: krunner (krunner), signal: Aborted
Using host libthread_db library "/lib64/libthread_db.so.1".
[Current thread is 1 (Thread 0x7f0569513780 (LWP 24909))]
Thread 3 (Thread 0x7f0556c47700 (LWP 24915)):
#0 0x00007f0565d865fd in poll () from /lib64/libc.so.6
#1 0x00007f05652758f2 in ?? () from /usr/lib64/libxcb.so.1
#2 0x00007f05652776df in xcb_wait_for_event () from /usr/lib64/libxcb.so.1
#3 0x00007f0558dad009 in ?? () from /usr/lib64/libQt5XcbQpa.so.5
#4 0x00007f0566442c9c in ?? () from /usr/lib64/libQt5Core.so.5
#5 0x00007f0563dad494 in start_thread () from /lib64/libpthread.so.0
#6 0x00007f0565d8f5dd in clone () from /lib64/libc.so.6
Thread 2 (Thread 0x7f0554b3a700 (LWP 24926)):
#0 0x00007f0565d865fd in poll () from /lib64/libc.so.6
#1 0x00007f0561e6ff2c in ?? () from /usr/lib64/libglib-2.0.so.0
#2 0x00007f0561e7003c in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0
#3 0x00007f056663527c in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5
#4 0x00007f05665e6f9a in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5
#5 0x00007f056643e4e4 in QThread::exec() () from /usr/lib64/libQt5Core.so.5
#6 0x00007f056962f235 in ?? () from /usr/lib64/libQt5DBus.so.5
#7 0x00007f0566442c9c in ?? () from /usr/lib64/libQt5Core.so.5
#8 0x00007f0563dad494 in start_thread () from /lib64/libpthread.so.0
#9 0x00007f0565d8f5dd in clone () from /lib64/libc.so.6
Thread 1 (Thread 0x7f0569513780 (LWP 24909)):
[KCrash Handler]
#6 0x00007f0565cd92e7 in raise () from /lib64/libc.so.6
#7 0x00007f0565cda76a in abort () from /lib64/libc.so.6
#8 0x00007f056642bd39 in QMessageLogger::fatal(char const*, ...) const () from /usr/lib64/libQt5Core.so.5
#9 0x00007f05696d0ba5 in ?? () from /usr/lib64/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
#10 0x00007f05696ce82b in ?? () from /usr/lib64/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
#11 0x00007f0558daeb21 in QXcbIntegration::createPlatformOpenGLContext(QOpenGLContext*) const () from /usr/lib64/libQt5XcbQpa.so.5
#12 0x00007f056695fead in QOpenGLContext::create() () from /usr/lib64/libQt5Gui.so.5
#13 0x00007f05696d13d5 in ?? () from /usr/lib64/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
#14 0x00007f05696d15b1 in ?? () from /usr/lib64/qt5/plugins/xcbglintegrations/libqxcb-glx-integration.so
#15 0x00007f056870913b in QSGRenderLoop::instance() () from /usr/lib64/libQt5Quick.so.5
#16 0x00007f056873d74a in QQuickWindowPrivate::init(QQuickWindow*, QQuickRenderControl*) () from /usr/lib64/libQt5Quick.so.5
#17 0x00007f056928886c in PlasmaQuick::Dialog::Dialog(QQuickItem*) () from /usr/lib64/libKF5PlasmaQuick.so.5
#18 0x00000000004085b3 in ?? ()
#19 0x0000000000406ee3 in ?? ()
#20 0x00007f0565cc6620 in __libc_start_main () from /lib64/libc.so.6
#21 0x0000000000407019 in _start () |
Again, whenever I run eselect opengl set xorg-x11 and then startx - everything works.
P.S. Sorry for extremly long posts. Should I have been just posting links to pastebin with logs? I can post it there and then edit my posts if you want. |
|
Back to top |
|
|
Roman_Gruber Advocate
Joined: 03 Oct 2006 Posts: 3846 Location: Austro Bavaria
|
Posted: Tue Sep 27, 2016 3:19 pm Post subject: |
|
|
How comes that you load all those unneeded gpu drivers
Code: | [ 12037.033] (II) LoadModule: "nouveau" |
Code: | [281167.019] (II) LoadModule: "fb" |
Code: | [281166.819] (II) UnloadModule: "vesa" |
Please fix that
Code: | [281166.931] (II) modeset(0): Modeline "1920x1080"x60.0 141.40 1920 1968 2000 2142 1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[281166.931] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[281166.931] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[281166.931] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[281166.931] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[281166.931] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[281166.931] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[281166.931] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[281166.931] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[281166.931] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[281166.931] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[281166.931] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[281166.931] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[281166.931] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[281166.931] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[281166.931] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[281166.931] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[281166.931] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) |
Whats up with those modelines of your monitor?
HAve you set wrong values, or does the hardware report / software read out wrong values?
Seems it probe everything which is possible and fails
--
Why not using latest kernel.org kernel? means gentoo-sources 4.7.3 for example |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Tue Sep 27, 2016 4:06 pm Post subject: |
|
|
Roman_Gruber wrote: | How comes that you load all those unneeded gpu drivers |
It only happens when I don't use xorg.conf. However using xorg.conf doesn't help and still nothing works.
And I don't thing it's a big issue (I mean, not desirable, but still not an issue) as currently the only way my plasma works is without xorg.conf, that is involving loading all those unneeded modules, and having eselect opengl set xorg-x11.
cat /etc/portage/make.conf | grep VIDEO_CARDS
Code: |
VIDEO_CARDS="intel i965 nvidia" |
Roman_Gruber wrote: | Whats up with those modelines of your monitor?
HAve you set wrong values, or does the hardware report / software read out wrong values? |
This also happens only when there is no /etc/X11/xorg.conf. But it doesn't fail tho, probably. If using eselect opengl set xorg-x11 and no xorg.conf it also probes all values, but X starts and works at maximum resolution (1920x1080).
Roman_Gruber wrote: | Why not using latest kernel.org kernel? means gentoo-sources 4.7.3 for example |
Well, 4.4.6 is marked stable, so I'm using it. Is it desirable to always have the latest kernel? Should I set accept keywords ~amd64 for the kernel?
Also, when I actually do use xorg.conf (very minimal one, you can check that in the very first post) there's no that modelines mess, although no values are set for it anyway. Interesting. |
|
Back to top |
|
|
Xywa Veteran
Joined: 23 Jul 2005 Posts: 1631 Location: /mnt/Gentoo/Europe
|
Posted: Wed Sep 28, 2016 5:59 am Post subject: Re: Black screen with nvidia proprietary drivers and KDE... |
|
|
Frustration wrote: | I'm using nvidia-drivers-370.28 from bobwya overlay as well as xorg-server-1.18.4-r1 and eselect-opengl-1.3.2 from the same overlay (because of this bug). |
Have you tried xorg-server-17.4?
I have black screen for 3 months and decreasing to xorg-server-17.4 and few other packages solve the problems (see package.mask bellow). I use newest nvidia-drivers from portage ( 370.28 ) - video editing & games works pretty well.
Code: | >x11-base/xorg-drivers-1.17
>x11-base/xorg-server-1.17.4
>x11-drivers/xf86-video-intel-2.99.917-r2
>x11-drivers/xf86-input-evdev-2.9.1 |
You should also check (when working on OpenGL xorg-x11 not nvidia): KDE [System Settings] > [Dispaly and Monitor] > [Display Configuration], and keep Laptop Screen enabled and siwtch off VGA-0, as with Plasma 5 this did the trick for me (as KDE was trying to send signal to external minitor instead of laptop screen, so I had black screen on laptop. Then go back OpenGL to nvidia, restart and see if this works. Also, when you have a balck screen, try click Fn button with F button to switch between monitors (external <-> laptop), as again, working x-screen could be rendered for some reason to external monitor.
and quite important switch off glamor USE flag:
Quote: | Some versions of the “modesetting” driver try to load a sub-module called “glamor”, which conflicts with the NVIDIA GLX implementation. Please ensure that the libglamoregl.so X module is not installed. |
Here is my history of fight with black screen (last topic):
https://forums.gentoo.org/viewtopic-t-1042882-highlight-optimus.html
and here, I still have black screen with xorg-server > 17.4:
https://forums.gentoo.org/viewtopic-t-1051634.html
BTW: My Optimus & Plasma5 works only on 1 account, and cannot run it on others |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Wed Sep 28, 2016 11:14 am Post subject: |
|
|
Xywa,
I've masked the packages and disabled glamor as you recommended and recompiled - still doesn't work .
The results are the same - an underscore in the corner of the screen with xorg.conf and an error message if xorg.conf is not used. The logs haven't changed either.
I'm not using any external monitors, but I checked in the settings - Laptop Screen is marked enabled already. Pressing the button to switch between monitors also has no impact. |
|
Back to top |
|
|
Xywa Veteran
Joined: 23 Jul 2005 Posts: 1631 Location: /mnt/Gentoo/Europe
|
Posted: Wed Sep 28, 2016 11:22 am Post subject: |
|
|
Frustration wrote: | Xywa,
I've masked the packages and disabled glamor as you recommended and recompiled - still doesn't work .
The results are the same - an underscore in the corner of the screen with xorg.conf and an error message if xorg.conf is not used. The logs haven't changed either.
I'm not using any external monitors, but I checked in the settings - Laptop Screen is marked enabled already. Pressing the button to switch between monitors also has no impact. |
Could you confirm is a full black or black with blinking cursor? |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Wed Sep 28, 2016 12:31 pm Post subject: |
|
|
Xywa wrote: |
Could you confirm is a full black or black with blinking cursor? |
If I use xorg.conf there is just a not blinking underscore (not cursor) in the left upper corner of the screen. Nothing else.
If I do not use xorg.conf there is a cursor, I can move it, pressing any buttons doesn't do anything, and there's also this error message:
Code: |
Plasma is unable to start as it could not correctly use OpenGL 2.
Please check that your graphic drivers are set up correctly. |
I can press "Ok" button when this message appears, if I do then it just disappears and nothing else happens. But the cursor is still there and I can move it.
---------
That's the contents of the xorg.conf when I use it:
Code: |
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:4:0:0"
EndSection |
|
|
Back to top |
|
|
Roman_Gruber Advocate
Joined: 03 Oct 2006 Posts: 3846 Location: Austro Bavaria
|
Posted: Wed Sep 28, 2016 1:26 pm Post subject: |
|
|
Frustration wrote: | If using eselect opengl set xorg-x11 |
I did not read everything ...
Code: | glxinfo |grep Yes
direct rendering: Yes
ASUS-G75VW roman # eselect opengl show
nvidia
ASUS-G75VW roman # eselect opengl list
Available OpenGL implementations:
[1] nvidia *
[2] xorg-x11
ASUS-G75VW roman #
|
I hope you are aware of that you need to set it to nvidia
The above code section shows what your box should show too. My box has the nvidia gpu hard wired to the screen of my monitor. The intel gpu of the cpu is not in use here
--
Just my opinion on the next question
Quote: | Roman_Gruber wrote:
Why not using latest kernel.org kernel? means gentoo-sources 4.7.3 for example
Well, 4.4.6 is marked stable, so I'm using it. Is it desirable to always have the latest kernel? Should I set accept keywords ~amd64 for the kernel? |
4.4.x is antique
When you have issues you should use the latest stable kernel from kernel.org. As gentoo uses some custom patches, means you should use gentoo-sources the latest available which is probably 4.7.3 / 4.7.4 ... whatever as of now is in the tree as of now
In my expierence, when you have hardware which works fine with older kernels and the hardware is dated, ~3-5 years old than you can use the stable kernel release. For any fancy new hardware, and when you want those optimizations => use ~ flagged gentoo sources with experimental use flag, which will allow you to set the cpu architecture for your kernel. i have an ivybridge cpu and with the experimental useflag set on the gentoo sources with ivybridge selected the compile time for libreoffice was a bit reduced. so there was an effect!
--
I always run ~amd64 since turion mt-32 days. Quite a few years by now
I suppose ~ gentoo-sources + ~ binary drivers for gpu drivers + stable branch should / may mix quite well.
next package which may be worth running ~ are the webbrowsers like google-chrome ...
The stabilization process is quite time consuming and there is a big procedure so those kernels and other packages usually vanish out of the tree before they are stable ... |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Wed Sep 28, 2016 2:29 pm Post subject: |
|
|
Unbelievable! Got it running, finally!
Conditions:
Masked packages as Xywa recommended.
Used libglx.so provided by Nvidia (just copied it ftom /usr/lib64/opengl/nvidia/extensions/libglx.so and placed it instead of /usr/lib64/xorg/modules/extensions/libglx.so)
Used xorg.conf with the following content:
Code: | Section "Module"
Load "modesetting"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
# Option "AllowEmptyInitialConfiguration"
BusID "PCI:4:0:0"
EndSection |
At this point acceleration works, however I still have issues with plasma - some fonts in qt packages became very small (screenshot). The fonts in, for example chromium/firefox, are fine though. I'm going to play a little bit with it - try other versions of xorg, maybe something else and report here if I have any sucess. |
|
Back to top |
|
|
Xywa Veteran
Joined: 23 Jul 2005 Posts: 1631 Location: /mnt/Gentoo/Europe
|
Posted: Wed Sep 28, 2016 3:20 pm Post subject: |
|
|
Frustration wrote: | Unbelievable! Got it running, finally!
Masked packages as Xywa recommended. |
Huurray!! I know the feeling
Maybe you did not restart the system before?
Anyway, keep going |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Wed Sep 28, 2016 4:45 pm Post subject: |
|
|
Xywa wrote: |
Maybe you did not restart the system before?
|
No, the thing that basically made it all work is adding these three lines to my xorg.conf
Code: | Section "Module"
Load "modesetting"
EndSection
|
|
|
Back to top |
|
|
asturm Developer
Joined: 05 Apr 2007 Posts: 8936
|
Posted: Wed Sep 28, 2016 5:06 pm Post subject: |
|
|
Frustration wrote: | Used libglx.so provided by Nvidia (just copied it ftom /usr/lib64/opengl/nvidia/extensions/libglx.so and placed it instead of /usr/lib64/xorg/modules/extensions/libglx.so) |
Was that step required for you to make it work or did you just do it anyway? Because with that, packages may fail to build in the future. |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Wed Sep 28, 2016 9:56 pm Post subject: |
|
|
asturm wrote: | Frustration wrote: | Used libglx.so provided by Nvidia (just copied it ftom /usr/lib64/opengl/nvidia/extensions/libglx.so and placed it instead of /usr/lib64/xorg/modules/extensions/libglx.so) |
Was that step required for you to make it work or did you just do it anyway? Because with that, packages may fail to build in the future. |
I saw this in /var/log/Xorg.0.log
Code: | [ 12522.562] (II) LoadModule: "glx"
[ 12522.562] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 12522.563] (II) Module glx: vendor="X.Org Foundation"
[ 12522.563] compiled for 1.18.4, module version = 1.0.0
[ 12522.563] ABI class: X.Org Server Extension, version 9.0
[ 12522.563] (==) AIGLX enabled
[ 12522.570] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 12522.570] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 12522.570] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 12522.570] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 12522.570] (EE) NVIDIA(0): reinstalling the NVIDIA driver. |
I decided to search if there's one by Nvidia somewhere:
Code: | sudo find / -name libglx.so
/usr/lib64/xorg/modules/extensions/libglx.so
/usr/lib64/opengl/nvidia/extensions/libglx.so |
For test purposes I did it pretty dirtily:
Code: | cd /usr/lib64/xorg/modules/extensions/
sudo mv libglx.so libglx.so.xorg
sudo cp /usr/lib64/opengl/nvidia/extensions/libglx.so . |
After that I saw this in Xorg logs:
Code: | [ 11684.787] (II) LoadModule: "glx"
[ 11684.787] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 11684.791] (II) Module glx: vendor="NVIDIA Corporation"
[ 11684.791] compiled for 4.0.2, module version = 1.0.0
[ 11684.791] Module class: X.Org Server Extension
[ 11684.791] (II) NVIDIA GLX Module 370.28 Thu Sep 1 19:14:30 PDT 2016 |
And no more error messages.
If I re-emerge nvidia drivers manually - /usr/lib64/xorg/modules/extensions/libglx.so does not get overwritten. Am I safe? |
|
Back to top |
|
|
asturm Developer
Joined: 05 Apr 2007 Posts: 8936
|
Posted: Wed Sep 28, 2016 10:04 pm Post subject: |
|
|
No, because that file is really owned by x11-base/xorg-server, so it will get overwritten. |
|
Back to top |
|
|
Fitzcarraldo Advocate
Joined: 30 Aug 2008 Posts: 2034 Location: United Kingdom
|
Posted: Thu Sep 29, 2016 8:08 am Post subject: |
|
|
Frustration wrote: | ...I still have issues with plasma - some fonts in qt packages became very small. The fonts in, for example chromium/firefox, are fine though... |
I had a similar problem and it turned out all I needed to do was add one line to the Monitor section in xorg.conf to specify the Dots Per Inch for the X Screen when using the NVIDIA driver:
Code: | Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
Option "DPI" "96 x 96" # This is the line I added to increase font size.
EndSection |
Perhaps that would help with your font size problem. _________________ Clevo W230SS: amd64, VIDEO_CARDS="intel modesetting nvidia".
Compal NBLB2: ~amd64, xf86-video-ati. Dual boot Win 7 Pro 64-bit.
OpenRC udev elogind & KDE on both.
Fitzcarraldo's blog |
|
Back to top |
|
|
The_Great_Sephiroth Veteran
Joined: 03 Oct 2014 Posts: 1602 Location: Fayetteville, NC, USA
|
Posted: Fri Sep 30, 2016 3:10 pm Post subject: |
|
|
Simple question as another nVidia user. Did you put the SDDM user in the video group? If the SDDM user is not in the video group, it doesn't matter if your user is. SDDM must be in the video group! _________________ Ever picture systemd as what runs "The Borg"? |
|
Back to top |
|
|
Frustration n00b
Joined: 17 Sep 2016 Posts: 26
|
Posted: Fri Sep 30, 2016 5:14 pm Post subject: |
|
|
The_Great_Sephiroth,
I did but that shouldn't matter anyway as I was doing all tests without involving SDDM at all by using .xinitrc script only. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|