petan
n00b
Joined: 18 Jan 2016
Posts: 55
|
 Posted: Thu Mar 10, 2016 10:59 am Post subject: How to tell dracut which firmwares should be included |
 |
|
Hi,
I am using dracut and it doesn't include some firmware files I need, for example
| Code: |
these are missing in initramfs:
/lib/firmware/intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
/lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
/lib/firmware/intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
resulting in
[ 1.766074] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2
[ 1.766076] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2)
[ 1.766082] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2
[ 1.766083] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
|
If I add them by hand to initramfs, which is annoying task, it works, but dracut doesn't seem to be smart enough to add them on its own. I specify the firmware directory using --fwdir /lib/firmware but it only copy some of the files, not all of them.
Is there any way to tell it to include for example all files in that directory? my /boot is big enough. I don't want to edit my initramfs by hand every time. |
|
Kernel & Hardware
