Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
EE no screens found
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Wed Aug 19, 2015 11:39 am    Post subject: EE no screens found Reply with quote

I have got gentoo installed and am logged in as root and tryimg to configute x11.

The machine is an AMD A8 7600, I think, kaveri and the embedded graphics chip is a Radeon 7.

I have added -qt3support -qt4 suid xorg to USE in /etc/portage/make.conf and set the consle framebuffer all empty and starred ATI Radeon and checked In blob firmware in make menuconfig

emerge --ask x11-base/xorg-server
emerge --ask x11-misc/xdm

When I run startx I get

II kms drm report modesetting isn't supported, and
EE no screens found

I dont think a driver's loaded, but I cannot find a name to to call it. I've recompiled the kernel and rebooted several times. I really don't know what else to try. This is day 2 on this installation,
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Wed Aug 19, 2015 1:22 pm    Post subject: Reply with quote

Check the Xorg log for some real info first.

However, if we're talking about open source driver, check your kernel settings and the standard guide.
Your card might simply need proper firmware either installed or embedded in the kernel (depending on the other kernel settings).
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Wed Aug 19, 2015 8:08 pm    Post subject: /var/log/Xorg.0.log Reply with quote

[ 33674.024]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 33674.024] X Protocol Version 11, Revision 0
[ 33674.024] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
[ 33674.024] Current Operating System: Linux wsgentoo 4.0.5-gentoo #6 SMP Wed Aug 19 23:46:14 ICT 2015 x86_64
[ 33674.024] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.5-gentoo root=UUID=3018dffe-7bbe-4c4b-a2b6-fbff57e8dda8 ro
[ 33674.024] Build Date: 19 August 2015 05:41:32PM
[ 33674.024]
[ 33674.024] Current version of pixman: 0.32.6
[ 33674.025] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33674.025] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33674.025] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 20 02:46:16 2015
[ 33674.025] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33674.025] (==) No Layout section. Using the first Screen section.
[ 33674.025] (==) No screen section available. Using defaults.
[ 33674.025] (**) |-->Screen "Default Screen Section" (0)
/var/log/Xorg.0.log lines 1-20/352 6%
[ 33674.025] (**) | |-->Monitor "<default monitor>"
[ 33674.025] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 33674.025] (==) Automatically adding devices
[ 33674.025] (==) Automatically enabling devices
[ 33674.025] (==) Automatically adding GPU devices
[ 33674.026] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 33674.026] Entry deleted from font path.
[ 33674.026] (==) FontPath set to:

[ 33674.026] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 33674.026] (II) The server relies on udev to provide the list of input devices.
/var/log/Xorg.0.log lines 21-42/352 12%
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 33674.026] (II) Loader magic: 0x800c80
[ 33674.026] (II) Module ABI versions:
[ 33674.026] X.Org ANSI C Emulation: 0.4
[ 33674.026] X.Org Video Driver: 18.0
[ 33674.026] X.Org XInput driver : 21.0
[ 33674.026] X.Org Server Extension : 8.0
[ 33674.028] (--) PCI:*(0:0:1:0) 1002:1313:1458:d000 rev 0, Mem @ 0xc0000000/268435456, 0xd0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 33674.028] (II) LoadModule: "glx"
[ 33674.028] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 33674.030] (II) Module glx: vendor="X.Org Foundation"
[ 33674.030] compiled for 1.16.4, module version = 1.0.0
[ 33674.030] ABI class: X.Org Server Extension, version 8.0
[ 33674.030] (==) AIGLX enabled
[ 33674.030] (==) Matched ati as autoconfigured driver 0
[ 33674.030] (==) Matched modesetting as autoconfigured driver 1
[ 33674.030] (==) Matched fbdev as autoconfigured driver 2
[ 33674.030] (==) Matched vesa as autoconfigured driver 3
[ 33674.030] (==) Assigned the driver to the xf86ConfigLayout
[ 33674.030] (II) LoadModule: "ati"
[ 33674.031] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 33674.031] (II) Module ati: vendor="X.Org Foundation"
[ 33674.031] compiled for 1.16.4, module version = 7.5.0
[ 33674.031] Module class: X.Org Video Driver
[ 33674.031] ABI class: X.Org Video Driver, version 18.0
[ 33674.031] (II) LoadModule: "radeon"
[ 33674.031] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 33674.031] (II) Module radeon: vendor="X.Org Foundation"
[ 33674.031] compiled for 1.16.4, module version = 7.5.0
[ 33674.031] Module class: X.Org Video Driver
[ 33674.031] ABI class: X.Org Video Driver, version 18.0
[ 33674.031] (II) LoadModule: "modesetting"
[ 33674.031] (WW) Warning, couldn't open module modesetting
[ 33674.031] (II) UnloadModule: "modesetting"
[ 33674.031] (II) Unloading modesetting
[ 33674.031] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 33674.031] (II) LoadModule: "fbdev"
[ 33674.032] (WW) Warning, couldn't open module fbdev
[ 33674.032] (II) UnloadModule: "fbdev"
[ 33674.032] (II) Unloading fbdev
[ 33674.032] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 33674.032] (II) LoadModule: "vesa"
[ 33674.032] (WW) Warning, couldn't open module vesa
/var/log/Xorg.0.log lines 63-85/352 25%
[ 33674.032] (II) UnloadModule: "vesa"
[ 33674.032] (II) Unloading vesa
[ 33674.032] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 33674.032] (II) RADEON: Driver for ATI Radeon chipsets:

< about 300 lines of chipset names >

[ 33674.041] (--) using VT number 7

[ 33674.043] (II) [KMS] drm report modesetting isn't supported.
[ 33674.043] (EE) Screen 0 deleted because of no matching config section.
[ 33674.043] (II) UnloadModule: "radeon"
[ 33674.043] (EE) Device(s) detected, but none match those in the config file.
[ 33674.043] (EE)
Fatal server error:
[ 33674.043] (EE) no screens found(EE)
[ 33674.043] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 33674.043] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 33674.043] (EE)
[ 33674.046] (EE) Server terminated with error (1). Closing log file.
/var/log/Xorg.0.log lines 331-352/352 (END)
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 54096
Location: 56N 3W

PostPosted: Wed Aug 19, 2015 9:25 pm    Post subject: Reply with quote

jfmxl,

Please use wgetpaste for posts like this. Its easier to read and search.
You will need to emerge it.

Code:
[ 33674.043] (II) [KMS] drm report modesetting isn't supported.

This normally means that your kernel is missing support for Kernel Mode Switching, it can also mean that a framebuffer driver has grabbed your video card before the Radeon driver loaded, the two drivers fought over the hardware and Radeon lost.

Your kernel looks nice and new
Code:
4.0.5-gentoo #6 SMP Wed Aug 19 23:46:14 ICT 2015 x86_64
thats the build date and time in there.

Post your
Code:
lspci
output, the output of
Code:
emerge --info
they will both fit in a post, and tell how you configured and compiled your kernel.

Use wgetpaste to put your kernel .config on the web, its far too big to fit in a forums post.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Thu Aug 20, 2015 1:03 am    Post subject: wgetpaste is very slick indeed Reply with quote

wgetpaste is very slick indeed ... I read help, but still didn't quite understand it, so I put all the data up at bpaste.net

lspci + emerge -- info : https://bpaste.net/show/122eb8652cc6

cat /boot/config-4.0.5-gentoo : https://bpaste.net/show/eaa11a335449

If you still want the first here ... well, hell, Ill just cut em and paste em ..

# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri HDMI/DP Audio Controller
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1424
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1424
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1424
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 16)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 5
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10)


# emerge --info
Portage 2.2.20.1 (python 3.4.1-final-0, default/linux/amd64/13.0/desktop, gcc-4.8.4, glibc-2.20-r2, 4.0.5-gentoo x86_64)
=================================================================
System uname: Linux-4.0.5-gentoo-x86_64-AMD_A8-7600_Radeon_R7,_10_Compute_Cores_4C+6G-with-gentoo-2.2
KiB Mem: 7084700 total, 6479492 free
KiB Swap: 8388604 total, 8388604 free
Timestamp of repository gentoo: Tue, 18 Aug 2015 11:00:01 +0000
sh bash 4.3_p33-r2
ld GNU ld (Gentoo 2.24 p1.4) 2.24
app-shells/bash: 4.3_p33-r2::gentoo
dev-lang/perl: 5.20.2::gentoo
dev-lang/python: 2.7.9-r1::gentoo, 3.4.1::gentoo
dev-util/cmake: 3.2.2::gentoo
dev-util/pkgconfig: 0.28-r2::gentoo
sys-apps/baselayout: 2.2::gentoo
sys-apps/openrc: 0.17::gentoo
sys-apps/sandbox: 2.6-r1::gentoo
sys-devel/autoconf: 2.69::gentoo
sys-devel/automake: 1.15::gentoo
sys-devel/binutils: 2.24-r3::gentoo
sys-devel/gcc: 4.8.4::gentoo
sys-devel/gcc-config: 1.7.3::gentoo
sys-devel/libtool: 2.4.6::gentoo
sys-devel/make: 4.1-r1::gentoo
sys-kernel/linux-headers: 3.18::gentoo (virtual/os-headers)
sys-libs/glibc: 2.20-r2::gentoo
Repositories:

gentoo
location: /usr/portage
sync-type: rsync
sync-uri: rsync://rsync.gentoo.org/gentoo-portage
priority: -1000

ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl acpi alsa amd64 berkdb bindist bluetooth branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups cxx dbus dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif glamor gpm gtk iconv ipv6 jpeg lcms ldap libnotify mad mmx mmxext mng modules mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds readline sdl seccomp session spell sse sse2 ssl startup-notification suid svg tcpd tiff truetype udev udisks unicode upower usb vorbis wxwidgets x264 xcb xml xorg xv xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON

.. and cut the line numbers.
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 6920

PostPosted: Thu Aug 20, 2015 3:24 am    Post subject: Reply with quote

You need the radeonsi driver, not radeon.

You have CONFIG_FIRMWARE_IN_KERNEL=y but haven't actually specified the required files for your card in CONFIG_EXTRA_FIRMWARE. Either fill in CONFIG_EXTRA_FIRMWARE or set and CONFIG_DRM_RADEON=m.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Thu Aug 20, 2015 5:48 am    Post subject: I change VIDEO_CARDS to radeonsi in /etc/portage/make.conf? Reply with quote

Thanks Ant. P, sir.

So I change VIDEO_CARDS="radeon" to VIDEO_CARDS="radeonsi" in /etc/portage/make.conf?

Then set CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m and unset CONFIG_EXTRA_FIRMWARE_IN_KERNEL during make menuconfig?

I'd rather set the file name(s) of the binary module in CONFIG_EXTRA_FIRMWARE, but I don't know what that module would be. Or where it would be found.

Thanks again for helping out.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Thu Aug 20, 2015 7:05 am    Post subject: Tried the module route ... no change. Reply with quote

Tried the module route ... no change.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Thu Aug 20, 2015 10:02 am    Post subject: Reply with quote

If CONFIG_DRM_RADEON is 'm', check dmesg to see if the firmware is getting loaded when the module is.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Thu Aug 20, 2015 10:46 am    Post subject: radeon: probe of 0000:00:01 Reply with quote

Thanks VoidMage

[ 3.143157] systemd-udevd[2444]: starting version 216
[ 3.261411] [drm] Initialized drm 1.1.0 20060810
[ 3.289773] [drm] radeon kernel modesetting enabled.
[ 3.290154] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1458:0xD000).
[ 3.290167] [drm] register mmio base: 0xFEB00000
[ 3.290168] [drm] register mmio size: 262144
[ 3.290173] [drm] doorbell mmio base: 0xD0000000
[ 3.290174] [drm] doorbell mmio size: 8388608
[ 3.290223] ATOM BIOS: 113
[ 3.290271] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.290273] radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 3.290274] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.290275] [drm] RAM width 128bits DDR
[ 3.290348] [TTM] Zone kernel: Available graphics memory: 3543772 kiB
[ 3.290349] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.290351] [TTM] Initializing pool allocator
[ 3.290355] [TTM] Initializing DMA pool allocator
[ 3.290371] [drm] radeon: 1024M of VRAM memory ready
[ 3.290372] [drm] radeon: 1024M of GTT memory ready.
[ 3.290381] [drm] Loading kaveri Microcode
[ 3.290845] radeon 0000:00:01.0: Direct firmware load for radeon/kaveri_pfp.bin failed with error -2
[ 3.290878] radeon 0000:00:01.0: Direct firmware load for radeon/KAVERI_pfp.bin failed with error -2
[ 3.290882] cik_cp: Failed to load firmware "radeon/KAVERI_pfp.bin"
[ 3.290958] [drm:cik_init [radeon]] *ERROR* Failed to load firmware!
[ 3.290962] radeon 0000:00:01.0: Fatal error during GPU init
[ 3.290968] [drm] radeon: finishing device.
[ 3.298168] [TTM] Finalizing pool allocator
[ 3.298177] [TTM] Finalizing DMA pool allocator
[ 3.298219] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 3.298228] [TTM] Zone dma32: Used memory at exit: 0 kiB
[ 3.298232] [drm] radeon: ttm finalized
[ 3.298741] radeon: probe of 0000:00:01.0 failed with error -2

... where do you suppose the radeon/KAVERI_php.bin might be?
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Thu Aug 20, 2015 4:44 pm    Post subject: Reply with quote

Given it doesn't seem to be in kernel repo, you most likely need to install sys-kernel/linux-firmware recent enough to contain that particular blob.

That one drops quite a lot of files - you can limit it, but the method, the package uses is quite inconvenient.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Thu Aug 20, 2015 9:34 pm    Post subject: emerge --ask sys-kernel/linux-firmware, still no joy Reply with quote

emerge --ask sys-kernel/linux-firmware

I edited /etc/portage/make.conf and changed radeonsi back to radeon

make && make modules_install
make install
reboot

relevant snip from dmesg :

[ 3.192883] [drm] Initialized drm 1.1.0 20060810
[ 3.228819] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 3.236723] systemd-udevd[2463]: renamed network interface eth0 to enp1s0
[ 3.237457] r8169 0000:02:06.0 enp2s6: renamed from eth1
[ 3.248604] systemd-udevd[2472]: renamed network interface eth1 to enp2s6
[ 3.653885] [drm] radeon kernel modesetting enabled.
[ 3.654582] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1458:0xD000).
[ 3.654619] [drm] register mmio base: 0xFEB00000
[ 3.654622] [drm] register mmio size: 262144
[ 3.654633] [drm] doorbell mmio base: 0xD0000000
[ 3.654635] [drm] doorbell mmio size: 8388608
[ 3.654711] ATOM BIOS: 113
[ 3.654769] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.654774] radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 3.654777] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.654780] [drm] RAM width 128bits DDR
[ 3.654869] [TTM] Zone kernel: Available graphics memory: 3543772 kiB
[ 3.654871] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.654874] [TTM] Initializing pool allocator
[ 3.654883] [TTM] Initializing DMA pool allocator
[ 3.654915] [drm] radeon: 1024M of VRAM memory ready
[ 3.654917] [drm] radeon: 1024M of GTT memory ready.
[ 3.654947] [drm] Loading kaveri Microcode
[ 3.683761] [drm] Internal thermal controller without fan control
[ 3.685088] [drm] radeon: dpm initialized
[ 3.697642] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 3.697664] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 3.712719] [drm] PCIE GART of 1024M enabled (table at 0x000000000078C000).
[ 3.712892] radeon 0000:00:01.0: WB enabled
[ 3.712912] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800788a8c00
[ 3.712917] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800788a8c04
[ 3.712921] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800788a8c08
[ 3.712925] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800788a8c0c
[ 3.712929] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800788a8c10
[ 3.713363] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90011936c98
[ 3.713454] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8800788a8c18
[ 3.713458] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8800788a8c1c
[ 3.713462] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.713464] [drm] Driver supports precise vblank timestamp query.
[ 3.713506] radeon 0000:00:01.0: radeon: using MSI.
[ 3.713537] [drm] radeon: irq initialized.
[ 3.716797] [drm] ring test on 0 succeeded in 2 usecs
[ 3.716893] [drm] ring test on 1 succeeded in 2 usecs
[ 3.716910] [drm] ring test on 2 succeeded in 2 usecs
[ 3.716992] [drm] ring test on 3 succeeded in 3 usecs
[ 3.717000] [drm] ring test on 4 succeeded in 3 usecs
[ 3.763163] [drm] ring test on 5 succeeded in 1 usecs
[ 3.783347] [drm] UVD initialized successfully.
[ 3.893495] [drm] ring test on 6 succeeded in 15 usecs
[ 3.893507] [drm] ring test on 7 succeeded in 4 usecs
[ 3.893508] [drm] VCE initialized successfully.
[ 3.896022] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.397075] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.898250] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.898416] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.898477] [drm] ib test on ring 4 succeeded in 0 usecs
[ 5.419377] [drm] ib test on ring 5 succeeded
[ 5.440118] [drm] ib test on ring 6 succeeded
[ 5.441232] [drm] ib test on ring 7 succeeded
[ 5.442356] [drm] Radeon Display Connectors
[ 5.442361] [drm] Connector 0:
[ 5.442364] [drm] DVI-D-1
[ 5.442366] [drm] HPD3
[ 5.442370] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 5.442372] [drm] Encoders:
[ 5.442374] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.442376] [drm] Connector 1:
[ 5.442378] [drm] HDMI-A-1
[ 5.442379] [drm] HPD1
[ 5.442382] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 5.442384] [drm] Encoders:
[ 5.442386] [drm] DFP1: INTERNAL_UNIPHY
[ 5.442388] [drm] Connector 2:
[ 5.442389] [drm] VGA-1
[ 5.442391] [drm] HPD2
[ 5.442394] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.442395] [drm] Encoders:
[ 5.442397] [drm] CRT1: INTERNAL_UNIPHY3
[ 5.442399] [drm] CRT1: NUTMEG
[ 5.567750] [drm] fb mappable at 0xC0990000
[ 5.567756] [drm] vram apper at 0xC0000000
[ 5.567759] [drm] size 4325376
[ 5.567761] [drm] fb depth is 24
[ 5.567764] [drm] pitch is 5632
[ 5.568150] fbcon: radeondrmfb (fb0) is primary device
[ 5.638365] Console: switching to colour frame buffer device 170x48
[ 5.643590] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 5.643594] radeon 0000:00:01.0: registered panic notifier

from startx:

(II) [KMS] Kernel modesetting enabled.
gbm: failed to open any driver (search paths /usr/lib64/dri)
gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi
EGL_MESA_drm_image required.
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
xinit: connection to X server lost

wgetpaste -n jfmxl -c cat /var/log/Xorg.0.log
Your paste can be seen here: https://bpaste.net/show/baf517cf0b3d
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Fri Aug 21, 2015 12:43 am    Post subject: Reply with quote

OK, so we left the kernel.

Now, 'emerge -1pv media-libs/mesa x11-libs/libdrm x11-drivers/xf86-video-ati' ?
(though given the message, it's probably just a matter of setting VIDEO_CARDS correctly and rebuilding mesa)

(just to clarify, by proper I mean "radeon radeonsi", so it's valid for both libdrm and mesa)

BTW, I'm ignoring for now the other poster - not for the hijack attempt, but for not reading this thread (as it not only has a list of things that need to be posted/checked but also (most likely) all the steps toward a proper solution).
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 2:10 am    Post subject: Ok, I ran ... emerge -1pv media-libs/mesa x11-libs/libdrm x1 Reply with quote

Ok, I ran ...

emerge -1pv media-libs/mesa x11-libs/libdrm x11-drivers/xf86-video-ati

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] x11-libs/libdrm-2.4.59::gentoo USE="-libkms -static-libs" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="radeon (-exynos) (-freedreno) -intel* -nouveau* (-omap) (-tegra) -vmware*" 0 KiB
[ebuild R ] media-libs/mesa-10.3.7-r1::gentoo USE="bindist classic dri3 egl gallium gbm llvm nptl udev -debug -gles1 -gles2 -opencl -openmax -openvg -osmesa -pax_kernel -pic (-selinux) -vdpau -wayland -xa -xvmc" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="radeon (-freedreno) -i915 -i965 -ilo -intel* -nouveau* -r100 -r200 -r300 -r600 -radeonsi -vmware*" 0 KiB
[ebuild R ] x11-drivers/xf86-video-ati-7.5.0::gentoo USE="glamor udev" 0 KiB

Total: 3 packages (3 reinstalls), Size of downloads: 0 KiB

... and that's all it did. I assume the last line tells the story ... nothing to do.

Then I edited /etc/portage/make.conf, changing VIDEO_CARDS to "radeon radeonsi"

Then I recompiled the kernel.

Then I ran startx ...

(II) [KMS] Kernel modesetting enabled.
gbm: failed to open any driver (search paths /usr/lib64/dri)
gbm: Last dlopen error: /usr/lib64/dri/radeonsi_dri.so: cannot open shared object file: No such file or directory
failed to load driver: radeonsi
EGL_MESA_drm_image required.
/etc/X11/xinit/xinitrc: line 106: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 103: xclock: command not found
/etc/X11/xinit/xinitrc: line 105: xterm: command not found
/etc/X11/xinit/xinitrc: line 102: twm: command not found
/etc/X11/xinit/xinitrc: line 104: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.

wgetpaste -n jfmxl -c cat /var/log/Xorg.0.log
Your paste can be seen here: https://bpaste.net/show/b10dd9328e63

Reading the log I'd expect to see something on VT number 7, but no - nothing there.

I see an (EE) at line 354-5 ...

[ 41.551] EGL_MESA_drm_image required.
[ 41.551] (EE) RADEON(0): glamor detected, failed to initialize EGL.

... you mentioned MESA, am I supposed to have emerged MESA?

emerge --ask media-libs/mesa
emerge --ask media-libs/libtxc_dxtn

Nope. Still no joy.

wgetpaste -n jfmxl -c cat /var/log/Xorg.0.log
Your paste can be seen here: https://bpaste.net/show/49b1ead710e0
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Fri Aug 21, 2015 10:45 am    Post subject: Reply with quote

Except for the fallback to software rendering, the xorg log says things are OK - it simply quits, as there are no clients.

:roll: Just read the guide properly.

Though that fallback is strange - recheck 'emerge -1pv media-libs/mesa' as I get the feeling you're not setting it correctly.
Otherwise pastebin mesa build log.
Back to top
View user's profile Send private message
g99
n00b
n00b


Joined: 12 Jun 2007
Posts: 32

PostPosted: Fri Aug 21, 2015 12:02 pm    Post subject: Reply with quote

VoidMage wrote:
BTW, I'm ignoring for now the other poster - not for the hijack attempt, but for not reading this thread (as it not only has a list of things that need to be posted/checked but also (most likely) all the steps toward a proper solution).


Like what? I read the thread before I posted, what I haven't posted is the output of dmesg as I see. It doesn't contain anything radeon-related btw, which corresponds to the empty lsmod output.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 5:24 pm    Post subject: How about a pointer to 'the guide'? Reply with quote

Just read the guide properly. ... How about a pointer to 'the guide'?
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 5:26 pm    Post subject: emerge -1pv media-libs/mesa Reply with quote

emerge -1pv media-libs/mesa

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] media-libs/mesa-10.3.7-r1::gentoo USE="bindist classic dri3 egl gallium gbm llvm nptl udev -debug -gles1 -gles2 -opencl -openmax -openvg -osmesa -pax_kernel -pic (-selinux) -vdpau -wayland -xa -xvmc" ABI_X86="(64) -32 (-x32)" VIDEO_CARDS="radeon radeonsi (-freedreno) -i915 -i965 -ilo -intel -nouveau -r100 -r200 -r300 -r600 -vmware" 0 KiB

Total: 1 package (1 reinstall), Size of downloads: 0 KiB
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Fri Aug 21, 2015 5:43 pm    Post subject: Reply with quote

Well, It's been quite awhile since I did it for the first time (as you only need to understand it once), but this guide,
while from a different distro, should still give you the general idea about what you need to do.

At minimum, you need a window manager, but you'll probably want something like Gnome/KDE or perhaps something bit more lightweight.

Still, about that mesa build log...
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 7:30 pm    Post subject: Thanks Reply with quote

Thanks, I'll read up on it. I hadn't used .xinitrc or startx in years myself. I have emerge'd xfce ... I'll read what you point me to.

For some reason I'd thought there might be a rundown on the whole process at gentoo. No, eh?

Thanks again for all your help.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 7:41 pm    Post subject: Still, about that mesa build log... Reply with quote

Still, about that mesa build log... where would that be?

find / -name \*[Mm][Ee][Ss][Aa]\* | grep log

yields nothing. Without the grep I see nothing that looks like a log, or looks like a place one might be ...

find / -name \*[Mm][Ee][Ss][Aa]\*
/usr/include/GL/wmesa.h
/usr/include/GL/osmesa.h
/usr/include/EGL/eglmesaext.h
/usr/lib64/opengl/xorg-x11/include/EGL/eglmesaext.h
/usr/lib64/mesa
/usr/lib64/dri/.keep_media-libs_mesa-0
/usr/share/eselect/modules/mesa.eselect
/usr/share/cmake/Help/command/use_mangled_mesa.rst
/usr/share/mesa
/usr/share/mesa/eselect-mesa.conf
/usr/share/man/man3/XcursorFilenameSaveImages.3
/usr/share/man/man3/XcursorFilenameSave.3
/usr/share/man/man2/futimesat.2.bz2
/usr/portage/media-libs/mesa
/usr/portage/media-libs/mesa/mesa-10.2.8.ebuild
/usr/portage/media-libs/mesa/mesa-10.5.8.ebuild
/usr/portage/media-libs/mesa/mesa-10.6.1.ebuild
/usr/portage/media-libs/mesa/mesa-7.10.3.ebuild
/usr/portage/media-libs/mesa/mesa-10.6.3.ebuild
/usr/portage/media-libs/mesa/mesa-10.6.2.ebuild
/usr/portage/media-libs/mesa/mesa-10.3.7-r2.ebuild
/usr/portage/media-libs/mesa/mesa-10.3.7-r1.ebuild
/usr/portage/media-libs/mesa/files/mesa-10.2-dont-require-llvm-for-r300.patch
/usr/portage/media-libs/mesa/files/mesa-10.2-sysfs-instead-of-libudev.patch
/usr/portage/media-libs/mesa/files/mesa-10.3.7-format_utils.c.patch
/usr/portage/media-libs/mesa/files/eselect-mesa.conf.7.10
/usr/portage/media-libs/mesa/files/mesa-10.3.7-dont-use-clrsb.patch
/usr/portage/media-libs/mesa/files/mesa-10.5.1-fstat-include.patch
/usr/portage/media-libs/mesa/files/eselect-mesa.conf.9.2
/usr/portage/media-libs/mesa/mesa-10.4.6.ebuild
/usr/portage/x11-libs/xvba-video/files/xvba-video-fix-mesa-gl.h.patch
/usr/portage/x11-drivers/xf86-video-virtualbox/files/xf86-video-virtualbox-3.2.8-mesa-check.patch
/usr/portage/app-emulation/wine/files/wine-1.5.17-osmesa-check.patch
/usr/portage/app-emulation/wine/files/wine-1.7.12-osmesa-check.patch
/usr/portage/app-emulation/wine/files/wine-1.7.2-osmesa-check.patch
/usr/portage/app-eselect/eselect-mesa
/usr/portage/app-eselect/eselect-mesa/eselect-mesa-0.0.9.ebuild
/usr/portage/app-eselect/eselect-mesa/eselect-mesa-0.0.10.ebuild
/usr/portage/x11-apps/mesa-progs
/usr/portage/x11-apps/mesa-progs/mesa-progs-8.2.0.ebuild
/usr/portage/x11-apps/mesa-progs/mesa-progs-8.1.0.ebuild
/usr/portage/dev-games/irrlicht/files/irrlicht-1.8.1-mesa-10.x.patch
/usr/portage/distfiles/MesaLib-10.3.7.tar.bz2
/usr/portage/distfiles/eselect-mesa-0.0.10.tar.gz
/usr/portage/metadata/news/2011-08-28-mesa-r600g
/usr/portage/metadata/news/2011-08-28-mesa-r600g/2011-08-28-mesa-r600g.en.txt.asc
/usr/portage/metadata/news/2011-08-28-mesa-r600g/2011-08-28-mesa-r600g.en.txt
/usr/portage/metadata/md5-cache/media-libs/mesa-10.3.7-r2
/usr/portage/metadata/md5-cache/media-libs/mesa-10.5.8
/usr/portage/metadata/md5-cache/media-libs/mesa-10.4.6
/usr/portage/metadata/md5-cache/media-libs/mesa-10.6.1
/usr/portage/metadata/md5-cache/media-libs/mesa-10.6.3
/usr/portage/metadata/md5-cache/media-libs/mesa-7.10.3
/usr/portage/metadata/md5-cache/media-libs/mesa-10.6.2
/usr/portage/metadata/md5-cache/media-libs/mesa-10.2.8
/usr/portage/metadata/md5-cache/media-libs/mesa-10.3.7-r1
/usr/portage/metadata/md5-cache/app-eselect/eselect-mesa-0.0.9
/usr/portage/metadata/md5-cache/app-eselect/eselect-mesa-0.0.10
/usr/portage/metadata/md5-cache/x11-apps/mesa-progs-8.1.0
/usr/portage/metadata/md5-cache/x11-apps/mesa-progs-8.2.0
/usr/portage/games-action/supertuxkart/files/supertuxkart-0.8.1-mesa-10.x.patch
/usr/portage/dev-util/apitrace/files/apitrace-4.0-glxcopysubbuffermesa.patch
/var/db/pkg/app-eselect/eselect-mesa-0.0.10
/var/db/pkg/app-eselect/eselect-mesa-0.0.10/eselect-mesa-0.0.10.ebuild
/var/db/pkg/media-libs/mesa-10.3.7-r1
/var/db/pkg/media-libs/mesa-10.3.7-r1/mesa-10.3.7-r1.ebuild
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Fri Aug 21, 2015 7:54 pm    Post subject: startxfce4 does the trick Reply with quote

startxfce4 does the trick, although I have no xterm or browser and so forth ... I imagine I can emerge them?

Thanks again for all your help.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 6196

PostPosted: Fri Aug 21, 2015 8:25 pm    Post subject: Reply with quote

xterm is just one of possible options...
Matter of taste, really...

Build logs are always generated during emerge, but unless you configure portage to keep them, they aren't kept.
Usually it's a good thing, as some of those tend to be large and (unless something goes wrong) not all that useful.

Unfortunately, it seems something did go wrong, so we need to see one for media-libs/mesa.
In the meanwhile you can pastebin 'equery f media-libs/mesa' so we could see if the files really aren't there or if it's something else that's the problem.
Back to top
View user's profile Send private message
jfmxl
n00b
n00b


Joined: 19 Aug 2015
Posts: 37

PostPosted: Sat Aug 22, 2015 12:00 am    Post subject: xinit: unexpected signal 2 Reply with quote

Well I went fo sleep and when I wpke up this is what I found ...

startxfce4
/usr/bin/startxfce4: Starting X server


X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo
Current Operating System: Linux wsgen 4.0.5-gentoo #7 SMP Thu Aug 20 13:45:45 ICT 2015 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.5-gentoo root=UUID=3018dffe-7bbe-4c4b-a2b6-fbff57e8dda8 ro
Build Date: 19 August 2015 05:41:32PM

Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 22 02:46:00 2015
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
xfce4-session: No GPG agent found

(xfce4-session:3419): xfce4-session-WARNING **: xfsm_manager_load_session: Something wrong with /home/jfl/.cache/sessions/xfce4-session-wsgen:0, Does it exist? Permissions issue?

(xfwm4:3430): GLib-CRITICAL **: g_str_has_prefix: assertion 'prefix != NULL' failed

(xfwm4:3430): xfwm4-WARNING **: The property '/general/double_click_distance' of type int is not supported

(xfwm4:3430): xfwm4-WARNING **: Error opening /dev/dri/card0: Permission denied

(polkit-gnome-authentication-agent-1:3439): polkit-gnome-1-WARNING **: Error getting authority: Error initializing authority: Could not connect: No such file or directory

(xfsettingsd:3441): libupower-glib-WARNING **: Couldn't connect to proxy: Could not connect: No such file or directory

** (xfdesktop:3438): WARNING **: Thumbnailer failed calling GetFlavors

(xfdesktop:3438): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported

(xfwm4:3430): xfwm4-WARNING **: Another compositing manager is running on screen 0

(Thunar:3436): GVFS-RemoteVolumeMonitor-WARNING **: remote volume monitor with dbus name org.gtk.Private.UDisks2VolumeMonitor is not supported
xter
(xfce4-panel:3434): Gtk-CRITICAL **: IA__gtk_widget_show: assertion 'GTK_IS_WIDGET (widget)' failed

(xfce4-panel:3434): Gtk-CRITICAL **: gtk_box_pack: assertion 'GTK_IS_WIDGET (child)' failed
xfce4-about-Message: No vendor information found in "/usr/share/xfce4/vendorinfo".
^Cxinit: connection to X server lost

waiting for X server to shut down xfwm4: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
xscreensaver: 02:49:54: SIGHUP received: restarting...
xscreensaver: 02:49:54: running as jfl/jfl (1000/1000)

xfdesktop: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
xscreensaver: 02:49:54: Can't open display: :0.0
xscreensaver: 02:49:54: running as jfl/jfl (1000/1000)

xscreensaver: 02:49:54: Errors at startup are usually authorization problems.
But you're not logging in as root (good!) so something
else must be wrong. Did you read the manual and the FAQ?

http://www.jwz.org/xscreensaver/faq.html
http://www.jwz.org/xscreensaver/man.html

(EE) Server terminated successfully (0). Closing log file.

xinit: unexpected signal 2


I cannot run

equery f media-libs/mesa

I tried emerge --ask equery and it suggested emerge --ask fquery, which I ran ...

emerge --ask fquery

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild N ] dev-lang/ghc-7.6.3-r1 USE="gmp -binary -doc -ghcbootstrap -ghcmakebinary -llvm"
[ebuild N ] app-admin/haskell-updater-1.2.9
[ebuild N ] dev-haskell/cabal-1.18.1.2 USE="-profile {-test}"
[ebuild N ] dev-haskell/text-0.11.3.1 USE="-developer -doc -hscolour -profile {-test}"
[ebuild N ] dev-haskell/primitive-0.5.1.0 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/extensible-exceptions-0.1.1.4 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/transformers-0.3.0.0-r1 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/mtl-2.1.2-r1 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/vector-0.10.0.1 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/hashable-1.2.1.0 USE="-doc -hscolour -profile {-test}" CPU_FLAGS_X86="sse2 -sse4_1"
[ebuild N ] dev-haskell/regex-base-0.93.2-r1 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/hashtables-1.1.2.1 USE="unsafe-tricks -bounds-checking -debug -doc -hscolour -portable -profile" CPU_FLAGS_X86="-sse4_1"
[ebuild N ] dev-haskell/parsec-3.1.4 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/regex-posix-0.95.2 USE="-doc -hscolour -profile"
[ebuild N ] dev-haskell/regex-compat-0.95.1 USE="-doc -hscolour -profile"
[ebuild N ~] app-portage/fquery-0.2.1.5

The following keyword changes are necessary to proceed:
(see "package.accept_keywords" in the portage(5) man page for more details)
# required by fquery (argument)
=app-portage/fquery-0.2.1.5 ~amd64

Would you like to add these changes to your config files? [Yes/No] y

Autounmask changes successfully written.

* IMPORTANT: config file '/etc/portage/package.accept_keywords' needs updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.

... with the result above ... now

fquery media-libs/mesa
bash: fquery: command not found

but I don't understand Autounmask changes successfully written ... I think it means emerge has prduced a new configuration file somewhere and renemaed the old one and it wants me to detlete the old one. Ill look on the man page for the incantation to discover its location and delete it.

In the meantime I cannot run fquery media-libs/mesa of equery f media-libs/mesa
Back to top
View user's profile Send private message
Tony0945
Watchman
Watchman


Joined: 25 Jul 2006
Posts: 5127
Location: Illinois, USA

PostPosted: Sat Aug 22, 2015 12:15 am    Post subject: Reply with quote

Quote:
but I don't understand Autounmask changes successfully written ... I think it means emerge has prduced a new configuration file somewhere and renemaed the old one and it wants me to detlete the old one. Ill look on the man page for the incantation to discover its location and delete it.


The magic incantation -
Code:
etc-update
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum