Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
B43 wireless issues
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
rican-linux
n00b
n00b


Joined: 13 Apr 2015
Posts: 34

PostPosted: Wed Apr 15, 2015 2:21 am    Post subject: B43 wireless issues Reply with quote

I am having issues with getting wireless to work on my iBook G4. I have followed the FAQ and installed the b43-fwcutter tool then I downloaded and extracted the firmware. Normally in Debian and Ubuntu I would run the command sudo modprobe b43 to wireless working. However I cannot get it work. I have verified the kernel modules are configured correctly. I am not sure what else I am missing.
Back to top
View user's profile Send private message
rican-linux
n00b
n00b


Joined: 13 Apr 2015
Posts: 34

PostPosted: Wed Apr 15, 2015 2:56 am    Post subject: Reply with quote

here is more info


Code:
rican-linux@ibookG4-gentoo ~ $ sudo lspci -vvn|grep 43 -A7
Password:
0001:10:12.0 0280: 14e4:4318 (rev 02)
   Subsystem: 106b:4318
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 16
   Interrupt: pin A routed to IRQ 52
   Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K]
   Kernel driver in use: b43-pci-bridge
   Kernel modules: ssb

0001:10:17.0 ff00: 106b:003e
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 16, Cache Line Size: 32 bytes
   Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
--
0001:10:1b.0 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
   Subsystem: 1033:0035
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
   Interrupt: pin A routed to IRQ 63
   Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [40] Power Management version 2
--
0001:10:1b.1 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
   Subsystem: 1033:0035
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
   Interrupt: pin B routed to IRQ 63
   Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [40] Power Management version 2
rican-linux@ibookG4-gentoo ~ $ dmesg |grep -e Broadcom -e b43
[   15.489102] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[   18.069007] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   18.111216] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   18.111244] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[   18.133784] Broadcom 43xx driver loaded [ Features: PMNL ]
[   98.348291] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   98.389604] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   98.389633] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[   98.413799] Broadcom 43xx driver loaded [ Features: PMNL ]
[ 6366.867109] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 6366.933675] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[ 6366.933704] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[ 6366.958892] Broadcom 43xx driver loaded [ Features: PMNL ]
rican-linux@ibookG4-gentoo ~ $
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum