| View previous topic :: View next topic |
| Author |
Message |
amaltheia
n00b
Joined: 03 Dec 2014
Posts: 55
|
 Posted: Sat Jan 31, 2015 3:14 am Post subject: [Solved]Have to boot through recovery mode |
 |
|
I messed up my computer after merging a configuration file with dispatch-conf. I did a big no no and updated a configuration file (I don't even know which ones I updated, so I don't know what needs to be fixed) with out checking into what I was doing. The result was that when I restarted my computer the Plymouth splash screen just sat there not doing anything. So, I hit alt-f2 to bring tty1 and logged in as root. I typed in startx and it failed to start KDE. I have had this problem with kdm since I first installed Gentoo on this computer. See my past post: https://forums.gentoo.org/viewtopic-t-1005612-highlight-.html and this one also: https://forums.gentoo.org/viewtopic-t-1007330-highlight-.html.
I decided to try and remove Plymouth so I followed the Plymouth wiki page and reset the configuration files opposite to how they were before I installed Plymouth. I then unmerged plymouth and did a "emerge --sync". Now I can boot into KDE, but I have to select the recovery mode option from GRUB2. If I don't then plymouth splash comes up and that is all that happens. Even if I hit alt-f2, nothing happens. The only thing that I know to do is to do a hard shutdown. What can I do to fix this?
Last edited by amaltheia on Mon Feb 02, 2015 1:58 am; edited 1 time in total |
|
| Back to top |
|
 |
Keruskerfuerst
Advocate
Joined: 01 Feb 2006
Posts: 2289
Location: near Augsburg, Germany
|
| Posted: Sat Jan 31, 2015 8:52 am Post subject: |
|
|
| Please post /var/log/Xorg.0.log and dmesg. |
|
| Back to top |
|
|
Roman_Gruber
Advocate
Joined: 03 Oct 2006
Posts: 3846
Location: Austro Bavaria
|
| Posted: Sat Jan 31, 2015 10:01 am Post subject: |
|
|
| Quote: | | Now I can boot into KDE, but I have to select the recovery mode option from GRUB2. |
So when you use the recovery option means your preset boot entry of grub2 is already broken.
Maybe first try to fix that first. Build a proper kernel, emerge the related gpu driver for X and than go on??
Many issues are solved by that.
I have no idea what Plymouth is except it is in the south coast of Devon, England |
|
| Back to top |
|
|
amaltheia
n00b
Joined: 03 Dec 2014
Posts: 55
|
| Posted: Sat Jan 31, 2015 1:32 pm Post subject: |
|
|
| Keruskerfuerst wrote: | | Please post /var/log/Xorg.0.log and dmesg. |
| Code: | cat /var/log/Xorg.0.log
[ 18.493]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 18.493] X Protocol Version 11, Revision 0
[ 18.494] Build Operating System: Linux 3.17.7-gentoo x86_64 Gentoo
[ 18.494] Current Operating System: Linux jeremy 3.17.7-gentoo #1 SMP Wed Dec 31 21:02:21 EST 2014 x86_64
[ 18.494] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.7-gentoo root=UUID=eed14529-125f-47ff-ad5f-359aef0435f0 ro single
[ 18.494] Build Date: 12 January 2015 11:56:11PM
[ 18.494]
[ 18.494] Current version of pixman: 0.32.4
[ 18.494] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.494] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.494] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 30 21:56:50 2015
[ 18.538] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.538] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.589] (==) No Layout section. Using the first Screen section.
[ 18.589] (==) No screen section available. Using defaults.
[ 18.589] (**) |-->Screen "Default Screen Section" (0)
[ 18.589] (**) | |-->Monitor "<default monitor>"
[ 18.609] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.609] (==) Automatically adding devices
[ 18.609] (==) Automatically enabling devices
[ 18.609] (==) Automatically adding GPU devices
[ 18.638] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 18.638] Entry deleted from font path.
[ 18.638] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 18.638] Entry deleted from font path.
[ 18.638] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 18.638] Entry deleted from font path.
[ 18.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.638] Entry deleted from font path.
[ 18.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.638] Entry deleted from font path.
[ 18.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.638] (==) FontPath set to:
/usr/share/fonts/misc/
[ 18.638] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 18.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.638] (II) Loader magic: 0x603c60
[ 18.638] (II) Module ABI versions:
[ 18.638] X.Org ANSI C Emulation: 0.4
[ 18.638] X.Org Video Driver: 15.0
[ 18.638] X.Org XInput driver : 20.0
[ 18.638] X.Org Server Extension : 8.0
[ 18.638] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.641] (--) PCI:*(0:0:2:0) 8086:2a02:1028:01f3 rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 18.641] (--) PCI: (0:0:2:1) 8086:2a03:1028:01f3 rev 12, Mem @ 0xfeb00000/1048576
[ 18.676] Initializing built-in extension Generic Event Extension
[ 18.676] Initializing built-in extension SHAPE
[ 18.676] Initializing built-in extension MIT-SHM
[ 18.676] Initializing built-in extension XInputExtension
[ 18.676] Initializing built-in extension XTEST
[ 18.676] Initializing built-in extension BIG-REQUESTS
[ 18.676] Initializing built-in extension SYNC
[ 18.676] Initializing built-in extension XKEYBOARD
[ 18.676] Initializing built-in extension XC-MISC
[ 18.676] Initializing built-in extension XINERAMA
[ 18.676] Initializing built-in extension XFIXES
[ 18.676] Initializing built-in extension RENDER
[ 18.676] Initializing built-in extension RANDR
[ 18.676] Initializing built-in extension COMPOSITE
[ 18.676] Initializing built-in extension DAMAGE
[ 18.676] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.676] Initializing built-in extension DOUBLE-BUFFER
[ 18.676] Initializing built-in extension RECORD
[ 18.676] Initializing built-in extension DPMS
[ 18.676] Initializing built-in extension Present
[ 18.676] Initializing built-in extension DRI3
[ 18.676] Initializing built-in extension X-Resource
[ 18.676] Initializing built-in extension XVideo
[ 18.676] Initializing built-in extension XVideo-MotionCompensation
[ 18.676] Initializing built-in extension XFree86-VidModeExtension
[ 18.676] Initializing built-in extension XFree86-DGA
[ 18.676] Initializing built-in extension XFree86-DRI
[ 18.676] Initializing built-in extension DRI2
[ 18.676] (II) LoadModule: "glx"
[ 18.804] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 19.087] (II) Module glx: vendor="X.Org Foundation"
[ 19.087] compiled for 1.15.2, module version = 1.0.0
[ 19.087] ABI class: X.Org Server Extension, version 8.0
[ 19.087] (==) AIGLX enabled
[ 19.087] Loading extension GLX
[ 19.087] (==) Matched intel as autoconfigured driver 0
[ 19.087] (==) Matched intel as autoconfigured driver 1
[ 19.087] (==) Matched modesetting as autoconfigured driver 2
[ 19.087] (==) Matched fbdev as autoconfigured driver 3
[ 19.087] (==) Matched vesa as autoconfigured driver 4
[ 19.087] (==) Assigned the driver to the xf86ConfigLayout
[ 19.087] (II) LoadModule: "intel"
[ 19.088] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 19.120] (II) Module intel: vendor="X.Org Foundation"
[ 19.120] compiled for 1.15.2, module version = 2.21.15
[ 19.120] Module class: X.Org Video Driver
[ 19.120] ABI class: X.Org Video Driver, version 15.0
[ 19.120] (II) LoadModule: "modesetting"
[ 19.139] (WW) Warning, couldn't open module modesetting
[ 19.139] (II) UnloadModule: "modesetting"
[ 19.139] (II) Unloading modesetting
[ 19.139] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 19.139] (II) LoadModule: "fbdev"
[ 19.139] (WW) Warning, couldn't open module fbdev
[ 19.139] (II) UnloadModule: "fbdev"
[ 19.139] (II) Unloading fbdev
[ 19.139] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 19.139] (II) LoadModule: "vesa"
[ 19.139] (WW) Warning, couldn't open module vesa
[ 19.139] (II) UnloadModule: "vesa"
[ 19.139] (II) Unloading vesa
[ 19.139] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 19.139] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 19.139] (++) using VT number 7
[ 19.168] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.168] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.168] (==) intel(0): RGB weight 888
[ 19.168] (==) intel(0): Default visual is TrueColor
[ 19.168] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 19.169] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[ 19.169] (**) intel(0): Framebuffer tiled
[ 19.169] (**) intel(0): Pixmaps tiled
[ 19.169] (**) intel(0): "Tear free" disabled
[ 19.169] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 19.169] (II) intel(0): Output LVDS1 has no monitor section
[ 19.170] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 19.170] (II) intel(0): Output VGA1 has no monitor section
[ 19.170] (II) intel(0): Output TV1 has no monitor section
[ 19.170] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[ 19.170] (==) intel(0): DPI set to (96, 96)
[ 19.170] (II) Loading sub module "dri2"
[ 19.170] (II) LoadModule: "dri2"
[ 19.170] (II) Module "dri2" already built-in
[ 19.170] (==) Depth 24 pixmap format is 32 bpp
[ 19.195] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 19.195] (==) intel(0): Backing store enabled
[ 19.195] (==) intel(0): Silken mouse enabled
[ 19.196] (II) intel(0): HW Cursor enabled
[ 19.196] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.210] (==) intel(0): DPMS enabled
[ 19.210] (II) intel(0): [DRI2] Setup complete
[ 19.210] (II) intel(0): [DRI2] DRI driver: i965
[ 19.210] (II) intel(0): direct rendering: DRI2 Enabled
[ 19.210] (==) intel(0): hotplug detection: "enabled"
[ 19.210] (--) RandR disabled
[ 19.664] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.664] (II) AIGLX: enabled GLX_ARB_create_context
[ 19.664] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 19.664] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 19.664] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.664] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.664] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 19.664] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 19.664] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.664] (II) AIGLX: Loaded and initialized i965
[ 19.664] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.671] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 19.716] (II) intel(0): Setting screen physical size to 338 x 211
[ 20.251] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 20.251] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.251] (II) LoadModule: "evdev"
[ 20.252] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 20.301] (II) Module evdev: vendor="X.Org Foundation"
[ 20.301] compiled for 1.15.2, module version = 2.8.2
[ 20.301] Module class: X.Org XInput Driver
[ 20.301] ABI class: X.Org XInput driver, version 20.0
[ 20.301] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.301] (**) Video Bus: always reports core events
[ 20.301] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 20.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 20.301] (--) evdev: Video Bus: Found keys
[ 20.301] (II) evdev: Video Bus: Configuring as keyboard
[ 20.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input3/event3"
[ 20.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 20.301] (**) Option "xkb_rules" "evdev"
[ 20.301] (**) Option "xkb_model" "pc104"
[ 20.301] (**) Option "xkb_layout" "us"
[ 20.339] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.339] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.339] (II) Using input driver 'evdev' for 'Power Button'
[ 20.339] (**) Power Button: always reports core events
[ 20.339] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 20.339] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 20.339] (--) evdev: Power Button: Found keys
[ 20.339] (II) evdev: Power Button: Configuring as keyboard
[ 20.339] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 20.339] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 20.339] (**) Option "xkb_rules" "evdev"
[ 20.339] (**) Option "xkb_model" "pc104"
[ 20.339] (**) Option "xkb_layout" "us"
[ 20.340] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 20.340] (II) No input driver specified, ignoring this device.
[ 20.340] (II) This device may have been added with another device file.
[ 20.340] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 20.340] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.341] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.341] (**) Sleep Button: always reports core events
[ 20.341] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 20.341] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 20.341] (--) evdev: Sleep Button: Found keys
[ 20.341] (II) evdev: Sleep Button: Configuring as keyboard
[ 20.341] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 20.341] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 20.341] (**) Option "xkb_rules" "evdev"
[ 20.341] (**) Option "xkb_model" "pc104"
[ 20.341] (**) Option "xkb_layout" "us"
[ 20.341] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 20.342] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 20.342] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.342] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.342] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.342] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 20.342] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 20.342] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 20.342] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.342] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 20.342] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 20.342] (**) Option "xkb_rules" "evdev"
[ 20.342] (**) Option "xkb_model" "pc104"
[ 20.342] (**) Option "xkb_layout" "us"
[ 20.343] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 20.343] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 20.343] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 20.343] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 20.343] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 20.343] (II) LoadModule: "synaptics"
[ 20.343] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 20.356] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.356] compiled for 1.15.2, module version = 1.7.4
[ 20.356] Module class: X.Org XInput Driver
[ 20.356] ABI class: X.Org XInput driver, version 20.0
[ 20.356] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 20.356] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.356] (**) Option "Device" "/dev/input/event6"
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 20.380] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right scroll-buttons
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 20.380] (**) Option "VertScrollDelta" "-111"
[ 20.380] (**) Option "HorizScrollDelta" "-111"
[ 20.380] (**) Option "VertEdgeScroll" "on"
[ 20.380] (**) Option "TapButton1" "-1"
[ 20.380] (**) Option "CircularScrolling" "on"
[ 20.380] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.380] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 20.392] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
[ 20.392] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 20.392] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 20.392] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 20.392] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 20.392] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 20.392] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 20.392] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 20.392] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.392] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 20.392] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 20.392] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event5)
[ 20.392] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 20.392] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 20.392] (**) ALPS PS/2 Device: always reports core events
[ 20.392] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event5"
[ 20.392] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 20.392] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 20.392] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 20.392] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 20.392] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 20.392] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 20.392] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event5"
[ 20.392] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
[ 20.392] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 20.393] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 20.393] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 20.393] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 20.393] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 20.393] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[ 20.393] (II) No input driver specified, ignoring this device.
[ 20.393] (II) This device may have been added with another device file.
[ 42.056] (II) intel(0): EDID vendor "AUO", prod id 17732
[ 42.056] (II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 42.056] (II) intel(0): Printing DDC gathered Modelines:
[ 42.056] (II) intel(0): Modeline "1280x800"x0.0 71.40 1280 1328 1360 1445 800 803 809 823 -hsync -vsync (49.4 kHz eP)
[ 1976.265] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 4292.618] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 6617.893] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 9582.447] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal
[ 37085.503] (II) intel(0): switch to mode 1280x800@60.0 on pipe 1 using LVDS1, position (0, 0), rotation normal |
Here is dmesg:
[code:1:b0e73d8ab6]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.7-gentoo (root@jeremy) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #1 SMP Wed Dec 31 21:02:21 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.17.7-gentoo root=UUID=eed14529-125f-47ff-ad5f-359aef0435f0 ro single
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f66d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f66d800-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Dell Inc. Inspiron 1420 /0DT492, BIOS A09 07/11/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f66d max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x020ff000, 0x020fffff] PGTABLE
[ 0.000000] BRK [0x02100000, 0x02100fff] PGTABLE
[ 0.000000] BRK [0x02101000, 0x02101fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7f400000-0x7f5fffff]
[ 0.000000] [mem 0x7f400000-0x7f5fffff] page 2M
[ 0.000000] BRK [0x02102000, 0x02102fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7f3fffff]
[ 0.000000] [mem 0x7c000000-0x7f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7f600000-0x7f66cfff]
[ 0.000000] [mem 0x7f600000-0x7f66cfff] page 4k
[ 0.000000] BRK [0x02103000, 0x02103fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37b12000-0x37d80fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBBF0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007F66F200 00005C (v01 DELL M08 27D8070B ASL 00000061)
[ 0.000000] ACPI: FACP 0x000000007F66F09C 0000F4 (v04 DELL M08 27D8070B ASL 00000061)
[ 0.000000] ACPI: DSDT 0x000000007F66F800 005676 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 0x000000007F67E000 000040
[ 0.000000] ACPI: HPET 0x000000007F66F300 000038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 0x000000007F66F400 000068 (v01 DELL M08 27D8070B ASL 00000047)
[ 0.000000] ACPI: MCFG 0x000000007F66F3C0 00003E (v16 DELL M08 27D8070B ASL 00000061)
[ 0.000000] ACPI: SLIC 0x000000007F66F49C 000176 (v01 DELL M08 27D8070B ASL 00000061)
[ 0.000000] ACPI: BOOT 0x000000007F66EFC0 000028 (v01 DELL M08 27D8070B ASL 00000061)
[ 0.000000] ACPI: SSDT 0x000000007F66DA82 0004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f66cfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7f66cfff]
[ 0.000000] NODE_DATA [mem 0x7f669000-0x7f66cfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007ce00000-ffff88007edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7f66cfff]
[ 0.000000] On node 0 totalpages: 521739
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8090 pages used for memmap
[ 0.000000] DMA32 zone: 517741 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s75264 r8192 d23040 u1048576
[ 0.000000] pcpu-alloc: s75264 r8192 d23040 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513564
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.7-gentoo root=UUID=eed14529-125f-47ff-ad5f-359aef0435f0 ro single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2033856K/2086956K available (9219K kernel code, 1061K rwdata, 3116K rodata, 1048K init, 916K bss, 53100K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:4352 nr_irqs:440 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1495.682 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2991.36 BogoMIPS (lpj=1495682)
[ 0.001012] pid_max: default: 32768 minimum: 301
[ 0.001024] ACPI: Core revision 20140724
[ 0.007663] ACPI: All ACPI Tables successfully acquired
[ 0.008042] Security Framework initialized
[ 0.008313] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009972] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010587] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010597] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010962] Initializing cgroup subsys freezer
[ 0.011014] CPU: Physical Processor ID: 0
[ 0.011018] CPU: Processor Core ID: 0
[ 0.011023] mce: CPU supports 6 MCE banks
[ 0.011034] CPU0: Thermal monitoring enabled (TM2)
[ 0.011047] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.011204] Freeing SMP alternatives memory: 28K (ffffffff82011000 - ffffffff82018000)
[ 0.011814] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021831] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.022000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.022000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.022000] ... version: 2
[ 0.022000] ... bit width: 40
[ 0.022000] ... generic registers: 2
[ 0.022000] ... value mask: 000000ffffffffff
[ 0.022000] ... max period: 000000007fffffff
[ 0.022000] ... fixed-purpose events: 3
[ 0.022000] ... event mask: 0000000700000003
[ 0.022000] x86: Booting SMP configuration:
[ 0.022000] .... node #0, CPUs: #1
[ 0.033038] x86: Booted up 1 node, 2 CPUs
[ 0.033048] smpboot: Total of 2 processors activated (5982.72 BogoMIPS)
[ 0.034107] devtmpfs: initialized
[ 0.035036] kworker/u4:0 (18) used greatest stack depth: 15080 bytes left
[ 0.035019] RTC time: 2:56:31, date: 01/31/15
[ 0.035019] NET: Registered protocol family 16
[ 0.035047] kworker/u4:1 (19) used greatest stack depth: 14512 bytes left
[ 0.035105] cpuidle: using governor ladder
[ 0.035105] cpuidle: using governor menu
[ 0.035105] ACPI: bus type PCI registered
[ 0.035105] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.035105] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.035225] PCI: Using configuration type 1 for base access
[ 0.035237] dmi type 0xB1 record - unknown flag
[ 0.036002] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.036002] mtrr: probably your BIOS does not setup all CPUs.
[ 0.036002] mtrr: corrected configuration.
[ 0.046027] kworker/u4:1 (36) used greatest stack depth: 14192 bytes left
[ 0.052279] ACPI: Added _OSI(Module Device)
[ 0.052279] ACPI: Added _OSI(Processor Device)
[ 0.052279] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052279] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.063246] ACPI: Dynamic OEM Table Load:
[ 0.063246] ACPI: SSDT 0xFFFF88007BEA6800 0001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.063403] ACPI: Dynamic OEM Table Load:
[ 0.063414] ACPI: SSDT 0xFFFF88007C0E3800 0005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.065004] ACPI: Dynamic OEM Table Load:
[ 0.065004] ACPI: SSDT 0xFFFF88007C174100 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.065471] ACPI: Dynamic OEM Table Load:
[ 0.065471] ACPI: SSDT 0xFFFF88007C175600 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.066066] ACPI: Interpreter enabled
[ 0.066094] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.066104] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.066133] ACPI: (supports S0 S3 S4 S5)
[ 0.066133] ACPI: Using IOAPIC for interrupt routing
[ 0.066187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.115133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.115133] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.115169] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.137735] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.138000] PCI host bridge to bus 0000:00
[ 0.138000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.138000] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.138000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0x80000000-0xf7ffffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff]
[ 0.138000] pci_bus 0000:00: root bus resource [mem 0xffb00000-0xffefffff]
[ 0.138000] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.138096] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.138117] pci 0000:00:02.0: reg 0x10: [mem 0xfea00000-0xfeafffff 64bit]
[ 0.138130] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138139] pci 0000:00:02.0: reg 0x20: [io 0xeff8-0xefff]
[ 0.139001] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.139001] pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfebfffff 64bit]
[ 0.139038] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.139038] pci 0000:00:1a.0: reg 0x20: [io 0x6f20-0x6f3f]
[ 0.141332] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.141408] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.141477] pci 0000:00:1a.1: reg 0x20: [io 0x6f00-0x6f1f]
[ 0.142700] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.143005] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.143005] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.143071] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.145061] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.145151] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.145182] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.145318] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.145393] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146006] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.146006] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146006] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146038] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.146038] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146038] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146068] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.146211] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146287] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.147001] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.147001] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.147001] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.147038] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.147038] pci 0000:00:1d.0: reg 0x20: [io 0x6f80-0x6f9f]
[ 0.148723] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.149005] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.149005] pci 0000:00:1d.1: reg 0x20: [io 0x6f60-0x6f7f]
[ 0.150919] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.151010] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.151079] pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f]
[ 0.153092] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.153184] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.153215] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.153342] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.155335] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.156002] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.156002] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.156039] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.156039] pci 0000:00:1f.0: can't claim BAR 7 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[ 0.156039] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.156039] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.156039] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.156039] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.156039] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.156039] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.156047] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.156062] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.156077] pci 0000:00:1f.1: reg 0x20: [io 0x6fa0-0x6faf]
[ 0.156109] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.156115] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.156120] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.156124] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.157001] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.157001] pci 0000:00:1f.2: reg 0x10: [io 0x6eb0-0x6eb7]
[ 0.157001] pci 0000:00:1f.2: reg 0x14: [io 0x6eb8-0x6ebb]
[ 0.157001] pci 0000:00:1f.2: reg 0x18: [io 0x6ec0-0x6ec7]
[ 0.157001] pci 0000:00:1f.2: reg 0x1c: [io 0x6ec8-0x6ecb]
[ 0.157001] pci 0000:00:1f.2: reg 0x20: [io 0x6ee0-0x6eff]
[ 0.157001] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb800-0xfe9fbfff]
[ 0.157001] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.157039] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.157039] pci 0000:00:1f.3: reg 0x10: [mem 0xfe9fb700-0xfe9fb7ff]
[ 0.157039] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[ 0.157039] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 0.157069] pci 0000:0c:00.0: [8086:4222] type 00 class 0x028000
[ 0.157140] pci 0000:0c:00.0: reg 0x10: [mem 0xfe8ff000-0xfe8fffff]
[ 0.157613] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.158006] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.158006] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[ 0.158006] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.158038] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.158038] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.158038] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.158038] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.158135] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000
[ 0.158219] pci 0000:09:00.0: reg 0x10: [mem 0xfe5f0000-0xfe5fffff 64bit]
[ 0.158721] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.159000] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.159000] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.159035] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010
[ 0.159042] pci 0000:03:01.0: reg 0x10: [mem 0xfe4ff800-0xfe4fffff]
[ 0.159163] pci 0000:03:01.0: supports D1 D2
[ 0.159166] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160002] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501
[ 0.160002] pci 0000:03:01.1: reg 0x10: [mem 0xfe4ff400-0xfe4ff4ff]
[ 0.160002] pci 0000:03:01.1: supports D1 D2
[ 0.160002] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160038] pci 0000:03:01.2: [1180:0843] type 00 class 0x088000
[ 0.160038] pci 0000:03:01.2: reg 0x10: [mem 0xfe4ff500-0xfe4ff5ff]
[ 0.160038] pci 0000:03:01.2: supports D1 D2
[ 0.160038] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160038] pci 0000:03:01.3: [1180:0592] type 00 class 0x088000
[ 0.160038] pci 0000:03:01.3: reg 0x10: [mem 0xfe4ff600-0xfe4ff6ff]
[ 0.160038] pci 0000:03:01.3: supports D1 D2
[ 0.160038] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160038] pci 0000:03:01.4: [1180:0852] type 00 class 0x088000
[ 0.160038] pci 0000:03:01.4: reg 0x10: [mem 0xfe4ff700-0xfe4ff7ff]
[ 0.160131] pci 0000:03:01.4: supports D1 D2
[ 0.160134] pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161005] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.161005] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
[ 0.161005] pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode)
[ 0.161035] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.161070] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.161183] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.161297] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.161409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.161526] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.161643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.161746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.162166] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.163080] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.163236] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.163253] vgaarb: loaded
[ 0.163257] vgaarb: bridge control possible 0000:00:02.0
[ 0.163538] SCSI subsystem initialized
[ 0.163613] libata version 3.00 loaded.
[ 0.163681] ACPI: bus type USB registered
[ 0.163730] usbcore: registered new interface driver usbfs
[ 0.163753] usbcore: registered new interface driver hub
[ 0.164046] usbcore: registered new device driver usb
[ 0.165036] pps_core: LinuxPPS API ver. 1 registered
[ 0.165036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.165086] PTP clock support registered
[ 0.165218] Advanced Linux Sound Architecture Driver Initialized.
[ 0.165252] PCI: Using ACPI for IRQ routing
[ 0.167390] PCI: pci_cache_line_size set to 64 bytes
[ 0.167517] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.167521] e820: reserve RAM buffer [mem 0x7f66d800-0x7fffffff]
[ 0.168062] NetLabel: Initializing
[ 0.168062] NetLabel: domain hash size = 128
[ 0.168062] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.168062] cfg80211: Calling CRDA to update world regulatory domain
[ 0.168062] NetLabel: unlabeled traffic allowed by default
[ 0.168116] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.168127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.168136] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.171009] Switched to clocksource hpet
[ 0.183155] pnp: PnP ACPI init
[ 0.183297] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.183352] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.183407] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.183504] system 00:03: [io 0x0c80-0x0cff] could not be reserved
[ 0.183513] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.183618] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.183626] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.183813] pnp 00:05: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183821] pnp 00:05: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183864] system 00:05: [io 0x0900-0x097f] has been reserved
[ 0.183871] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.183877] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.183919] pnp 00:06: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183926] pnp 00:06: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183933] pnp 00:06: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183940] pnp 00:06: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
[ 0.183987] system 00:06: [io 0xf400-0xf4fe] has been reserved
[ 0.183994] system 00:06: [io 0x1080-0x10bf] has been reserved
[ 0.184014] system 00:06: [io 0x10c0-0x10df] has been reserved
[ 0.184020] system 00:06: [io 0x0809] has been reserved
[ 0.184027] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197326] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.197335] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.197341] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.197347] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.197353] system 00:07: [mem 0x00100000-0x7f66d7ff] could not be reserved
[ 0.197358] system 00:07: [mem 0x7f66d800-0x7f6fffff] has been reserved
[ 0.197364] system 00:07: [mem 0x7f700000-0x7f7fffff] has been reserved
[ 0.197370] system 00:07: [mem 0x7f700000-0x7fefffff] could not be reserved
[ 0.197375] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.197381] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.197386] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.197392] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.197397] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.197403] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.197408] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.197414] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.197419] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.197425] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.197430] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.197436] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197516] pnp: PnP ACPI: found 8 devices
[ 0.202176] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[ 0.202182] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[ 0.202187] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b
Last edited by amaltheia on Sat Jan 31, 2015 1:39 pm; edited 2 times in total |
|
| Back to top |
|
|
amaltheia
n00b
Joined: 03 Dec 2014
Posts: 55
|
| Posted: Sat Jan 31, 2015 1:36 pm Post subject: |
|
|
| tw04l124 wrote: | | Quote: | | Now I can boot into KDE, but I have to select the recovery mode option from GRUB2. |
So when you use the recovery option means your preset boot entry of grub2 is already broken.
Maybe first try to fix that first. Build a proper kernel, emerge the related gpu driver for X and than go on??
Many issues are solved by that.
I have no idea what Plymouth is except it is in the south coast of Devon, England |
Do you mean that i should just rebuild my kernel as I had it before I did those updates?
Plymouth is just a program that gives a nice picture instead of the text that comes up during boot. https://wiki.gentoo.org/wiki/Plymouth |
|
| Back to top |
|
|
amaltheia
n00b
Joined: 03 Dec 2014
Posts: 55
|
| Posted: Mon Feb 02, 2015 2:10 am Post subject: |
|
|
Okayl, I figured out the problem. When I did an | Code: | | emerge --newuse --update --deep @world |
, it said that there were a couple of configuration files that needed to be updated. After carefully doing this, I found that I had changed to say yes, which can potentially cause a boot hangup. After that was fixed I rebooted and everything is working fine.
Thanks for all your help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Other Things Gentoo
