| View previous topic :: View next topic |
| Author |
Message |
dhr
n00b
Joined: 23 Jan 2015
Posts: 2
|
 Posted: Fri Jan 23, 2015 11:13 am Post subject: xorg - No devices detected, no screens found. |
 |
|
Hi All,
after a kernel upgrade, my x won't start. The /var/log/Xorg.0.log file logged:
| Code: | [ 30.943] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 30.944] (++) using VT number 7
[ 30.948] (EE) No devices detected.
[ 30.948] (EE)
Fatal server error:
[ 30.948] (EE) no screens found(EE)
[ 30.948] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
|
Here's some other info you might need:
| Code: | lspci | grep -I VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
|
I've enabled the following in my kernel, as instructed in the http://wiki.gentoo.org/wiki/Intel:
| Code: | Processor type and features --->
[*] MTRR (Memory Type Range Register) support
Device Drivers --->
Graphics support --->
<*> /dev/agpgart (AGP Support) --->
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*> Intel 8xx/9xx/G3x/G4x/HD Graphics
[*] Enable modesetting on intel by default
[*] Enable legacy fbdev support for the modesetting intel driver |
Here's xorg.conf
| Code: | more /etc/X11/xorg.conf.d/device_no_vesa.conf
#
# Remove errors regarding modules "fbdev" and "vesa"
#
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Monitor-LVDS" "Internal Panel"
Option "Monitor-VGA" "External VGA Monitor"
EndSection
|
I have | Code: | | VIDEO_CARDS="intel i965" |
in my make.conf.
Any idea what could be causing this and how can I solve it?
Thanks,
dhr |
|
| Back to top |
|
 |
khayyam
Watchman
Joined: 07 Jun 2012
Posts: 6227
Location: Room 101
|
| Posted: Fri Jan 23, 2015 11:43 am Post subject: |
|
|
dhr ... what does the following show?
| Code: | # cat /proc/fb
0 inteldrmfb |
... you didn't say how (or with what) the kernel was built, you might want to pastebin your .config.
best ... khay |
|
| Back to top |
|
|
dhr
n00b
Joined: 23 Jan 2015
Posts: 2
|
| Posted: Fri Jan 23, 2015 12:01 pm Post subject: |
|
|
/proc/fb is empty 
About the kernel upgrade, first I tried manually, copying .config files, running make silentoldconfig and selecting the kernel options by myself, but after few unsuccessful attempts to boot the new kernel, I used genkernel. Then run the grub2-mkconfig and booted successfully. As far as I've noticed, most of the services I use are running unimpacted, except the X ofcourse
this is in xorg's logs:
| Code: | [ 1115.692] (--) PCI:*(0:0:2:0) 8086:0412:1849:0412 rev 6, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
|
Here's dmesg:
| Code: | dmesg
[ 0.304984] vgaarb: loaded
[ 0.305034] vgaarb: bridge control possible 0000:00:02.0
[ 0.305143] SCSI subsystem initialized
[ 0.305240] PCI: Using ACPI for IRQ routing
[ 0.306480] PCI: pci_cache_line_size set to 64 bytes
[ 0.306514] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.306515] e820: reserve RAM buffer [mem 0xb82c7000-0xbbffffff]
[ 0.306516] e820: reserve RAM buffer [mem 0xb8e22000-0xbbffffff]
[ 0.306517] e820: reserve RAM buffer [mem 0xcbf51000-0xcbffffff]
[ 0.306517] e820: reserve RAM buffer [mem 0xcc194000-0xcfffffff]
[ 0.306518] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.306519] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.306617] Switched to clocksource hpet
[ 0.307810] pnp: PnP ACPI init
[ 0.307901] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.307960] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.308043] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.308100] system 00:01: [io 0xffff] has been reserved
[ 0.308156] system 00:01: [io 0xffff] has been reserved
[ 0.308211] system 00:01: [io 0xffff] has been reserved
[ 0.308267] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.308323] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.308380] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.308436] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.308492] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.308549] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.308606] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.308622] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.308650] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.308707] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.308749] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.308806] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.308973] pnp 00:05: [dma 3]
[ 0.309032] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.309141] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.309198] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.309283] pnp 00:07: [dma 0 disabled]
[ 0.309308] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.309541] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.309599] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.309657] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.309715] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.309773] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.309831] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.309889] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.309947] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.310008] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.310066] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.310123] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.310182] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.310241] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.310378] pnp: PnP ACPI: found 9 devices
[ 0.314981] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.315042] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.315112] pci 0000:00:1c.3: PCI bridge to [bus 02-03]
[ 0.315173] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.315173] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.315174] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315175] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.315176] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.315177] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.315178] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.315178] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.315179] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.315180] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.315181] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.315182] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.315183] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315184] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.315184] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.315185] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.315186] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.315187] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.315188] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.315189] pci_bus 0000:02: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.315190] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.315190] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.315191] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315192] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.315193] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.315194] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.315194] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.315195] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.315196] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.315197] pci_bus 0000:03: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.315235] NET: Registered protocol family 2
[ 0.315419] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.315532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.315689] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.315756] TCP: reno registered
[ 0.315808] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.315880] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.315993] NET: Registered protocol family 1
[ 0.316055] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.356739] PCI: CLS 64 bytes, default 64
[ 0.356766] Trying to unpack rootfs image as initramfs...
[ 0.618415] Freeing initrd memory: 3484K (ffff880037922000 - ffff880037c89000)
[ 0.618480] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.618538] software IO TLB [mem 0xc7f51000-0xcbf51000] (64MB) mapped at [ffff8800c7f51000-ffff8800cbf50fff]
[ 0.618785] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.619051] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.619131] audit: initializing netlink subsys (disabled)
[ 0.619196] audit: type=2000 audit(1422006069.620:1): initialized
[ 0.619519] VFS: Disk quotas dquot_6.5.2
[ 0.619585] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.619780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.619871] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.620119] ocfs2: Registered cluster interface o2cb
[ 0.620196] OCFS2 User DLM kernel interface loaded
[ 0.620442] gfs2: GFS2 installed
[ 0.620497] msgmni has been set to 15322
[ 0.620694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.620754] io scheduler noop registered
[ 0.620807] io scheduler deadline registered
[ 0.620870] io scheduler cfq registered (default)
[ 0.621108] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.641723] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.641981] Linux agpgart interface v0.103
[ 0.642758] brd: module loaded
[ 0.643158] loop: module loaded
[ 0.643264] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.645762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.645819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.645930] mousedev: PS/2 mouse device common for all mice
[ 0.646035] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.646190] TCP: cubic registered
[ 0.646244] NET: Registered protocol family 17
[ 0.646469] registered taskstats version 1
[ 0.646760] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.646960] Freeing unused kernel memory: 812K (ffffffff816b5000 - ffffffff81780000)
[ 0.683868] libata version 3.00 loaded.
[ 0.750562] ahci 0000:00:1f.2: version 3.0
[ 0.750659] ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
[ 0.750689] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.750691] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.767816] scsi host0: ahci
[ 0.767963] scsi host1: ahci
[ 0.768034] scsi host2: ahci
[ 0.768125] scsi host3: ahci
[ 0.768187] scsi host4: ahci
[ 0.768314] scsi host5: ahci
[ 0.768352] ata1: SATA max UDMA/133 abar m2048@0xf043a000 port 0xf043a100 irq 24
[ 0.768353] ata2: DUMMY
[ 0.768354] ata3: SATA max UDMA/133 abar m2048@0xf043a000 port 0xf043a200 irq 24
[ 0.768354] ata4: DUMMY
[ 0.768355] ata5: DUMMY
[ 0.768355] ata6: DUMMY
[ 1.107588] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.109087] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.109089] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.109090] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.111523] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[ 1.111524] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.113030] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.113031] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.113032] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.114511] ata3.00: configured for UDMA/133
[ 1.117599] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.118083] ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
[ 1.118085] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.118594] ata1.00: configured for UDMA/100
[ 1.118650] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
[ 1.118793] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.118795] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.118830] sd 0:0:0:0: [sda] Write Protect is off
[ 1.118832] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.118845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118858] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[ 1.118986] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.119018] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.119020] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.119033] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.128854] sdb: sdb1
[ 1.128994] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.173042] sda: sda1 sda2 sda3 sda4
[ 1.173229] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.182391] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.182421] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.208017] scsi: <fdomain> Detection failed (no card)
[ 1.258570] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 1.291739] imm: Version 2.05 (for Linux 2.4.0)
[ 1.356310] Fusion MPT base driver 3.04.20
[ 1.356312] Copyright (c) 1999-2008 LSI Corporation
[ 1.358346] Fusion MPT SPI Host driver 3.04.20
[ 1.359592] Fusion MPT FC Host driver 3.04.20
[ 1.360997] Fusion MPT SAS Host driver 3.04.20
[ 1.361960] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.362905] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.366297] HP CISS Driver (v 3.6.26)
[ 1.371717] Adaptec aacraid driver 1.2-0[30300]-ms
[ 1.373612] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.373757] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.375548] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014
[ 1.377182] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
[ 1.382804] Emulex LightPulse Fibre Channel SCSI driver 10.2.8001.0.
[ 1.382805] Copyright(c) 2004-2014 Emulex. All rights reserved.
[ 1.385228] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.390276] ACPI: bus type USB registered
[ 1.390295] usbcore: registered new interface driver usbfs
[ 1.390303] usbcore: registered new interface driver hub
[ 1.390325] usbcore: registered new device driver usb
[ 1.390512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.390584] ehci-pci: EHCI PCI platform driver
[ 1.390676] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.390680] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.390689] ehci-pci 0000:00:1a.0: debug port 2
[ 1.394582] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.394593] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf043c000
[ 1.407945] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.407995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.407996] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.407997] usb usb1: Product: EHCI Host Controller
[ 1.407998] usb usb1: Manufacturer: Linux 3.17.7-gentoo ehci_hcd
[ 1.407999] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.408085] hub 1-0:1.0: USB hub found
[ 1.408097] hub 1-0:1.0: 2 ports detected
[ 1.408270] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.408274] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.408284] ehci-pci 0000:00:1d.0: debug port 2
[ 1.412183] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.412192] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf043b000
[ 1.427939] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.427980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.427981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.427982] usb usb2: Product: EHCI Host Controller
[ 1.427983] usb usb2: Manufacturer: Linux 3.17.7-gentoo ehci_hcd
[ 1.427983] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.428057] hub 2-0:1.0: USB hub found
[ 1.428064] hub 2-0:1.0: 2 ports detected
[ 1.437367] usbcore: registered new interface driver usb-storage
[ 1.438392] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.439467] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.440655] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.440660] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.440732] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.440745] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
[ 1.440809] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440812] usb usb3: Product: xHCI Host Controller
[ 1.440812] usb usb3: Manufacturer: Linux 3.17.7-gentoo xhci_hcd
[ 1.440813] usb usb3: SerialNumber: 0000:00:14.0
[ 1.440898] hub 3-0:1.0: USB hub found
[ 1.440916] hub 3-0:1.0: 14 ports detected
[ 1.442492] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.442494] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.442544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.442546] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442547] usb usb4: Product: xHCI Host Controller
[ 1.442548] usb usb4: Manufacturer: Linux 3.17.7-gentoo xhci_hcd
[ 1.442548] usb usb4: SerialNumber: 0000:00:14.0
[ 1.442637] hub 4-0:1.0: USB hub found
[ 1.442650] hub 4-0:1.0: 6 ports detected
[ 1.446898] usbcore: registered new interface driver usbhid
[ 1.446899] usbhid: USB HID core driver
[ 1.495280] device-mapper: uevent: version 1.0.3
[ 1.495324] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.507829] md: raid0 personality registered for level 0
[ 1.508961] md: raid1 personality registered for level 1
[ 1.618168] tsc: Refined TSC clocksource calibration: 3498.984 MHz
[ 1.678237] raid6: sse2x1 10666 MB/s
[ 1.728300] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.848433] raid6: sse2x2 13973 MB/s
[ 1.878824] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.878825] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.878978] hub 1-1:1.0: USB hub found
[ 1.879074] hub 1-1:1.0: 6 ports detected
[ 1.998620] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.018632] raid6: sse2x4 16422 MB/s
[ 2.149141] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.149143] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.149292] hub 2-1:1.0: USB hub found
[ 2.149390] hub 2-1:1.0: 8 ports detected
[ 2.188832] raid6: avx2x1 20854 MB/s
[ 2.359033] raid6: avx2x2 24969 MB/s
[ 2.529247] raid6: avx2x4 28797 MB/s
[ 2.529248] raid6: using algorithm avx2x4 (28797 MB/s)
[ 2.529249] raid6: using avx2x2 recovery algorithm
[ 2.529427] async_tx: api initialized (async)
[ 2.529508] xor: automatically using best checksumming function:
[ 2.629348] avx : 33599.600 MB/sec
[ 2.629487] Switched to clocksource tsc
[ 2.629960] md: raid6 personality registered for level 6
[ 2.629961] md: raid5 personality registered for level 5
[ 2.629961] md: raid4 personality registered for level 4
[ 2.636306] md: raid10 personality registered for level 10
[ 2.637284] md: linear personality registered for level -1
[ 2.638269] md: multipath personality registered for level -4
[ 2.651934] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2.655557] RPC: Registered named UNIX socket transport module.
[ 2.655558] RPC: Registered udp transport module.
[ 2.655558] RPC: Registered tcp transport module.
[ 2.655559] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.663556] fuse init (API version 7.23)
[ 2.665330] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.665330] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.666933] pps_core: LinuxPPS API ver. 1 registered
[ 2.666934] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.667094] PTP clock support registered
[ 2.669423] Loading iSCSI transport class v2.0-870.
[ 2.749516] usb 3-11: new low-speed USB device number 2 using xhci_hcd
[ 2.820720] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 2.820807] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 2.859007] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.894910] usb 3-11: New USB device found, idVendor=046d, idProduct=c31c
[ 2.894911] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.894912] usb 3-11: Product: USB Keyboard
[ 2.894913] usb 3-11: Manufacturer: Logitech
[ 2.894972] usb 3-11: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.894974] usb 3-11: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.899411] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:046D:C31C.0001/input/input3
[ 2.899463] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-11/input0
[ 2.906022] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/0003:046D:C31C.0002/input/input4
[ 2.906075] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-11/input1
[ 4.948807] systemd-udevd[1950]: starting version 216
[ 5.073868] random: systemd-udevd urandom read with 113 bits of entropy available
[ 5.365749] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 5.365777] ACPI: Power Button [PWRB]
[ 5.365809] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.365827] ACPI: Power Button [PWRF]
[ 5.369205] Monitor-Mwait will be used to enter C-1 state
[ 5.369210] Monitor-Mwait will be used to enter C-2 state
[ 5.369216] ACPI: acpi_idle registered with cpuidle
[ 5.403705] parport_pc 00:05: reported by Plug and Play ACPI
[ 5.403756] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 5.483081] rtc_cmos 00:02: RTC can wake from S4
[ 5.483235] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 5.483282] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 5.509338] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 5.509339] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 5.509462] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.509474] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 5.516856] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.529933] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19
[ 5.538691] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19
[ 5.538699] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19
[ 5.538706] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19
[ 5.538734] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.614252] ppdev: user-space parallel port driver
[ 5.646798] random: nonblocking pool is initialized
[ 5.682703] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 5.682705] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:47:cc:1f
[ 5.682706] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.682731] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 5.682975] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 5.682980] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.683023] snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
[ 5.838417] [drm] Initialized drm 1.1.0 20060810
[ 5.903533] snd_hda_intel 0000:00:03.0: Cannot turn on display power on i915
[ 5.905332] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 5.905334] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.905335] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.905336] sound hdaudioC1D0: mono: mono_out=0x0
[ 5.905337] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 5.905337] sound hdaudioC1D0: inputs:
[ 5.905338] sound hdaudioC1D0: Front Mic=0x19
[ 5.905339] sound hdaudioC1D0: Rear Mic=0x18
[ 5.905340] sound hdaudioC1D0: Line=0x1a
[ 8.178805] vboxdrv: no symbol version for module_layout
[ 8.185844] vboxdrv: no symbol version for module_layout
[ 8.192687] vboxdrv: no symbol version for module_layout
[ 8.557648] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 8.728146] Adding 15625212k swap on /dev/sda3. Priority:-1 extents:1 across:15625212k
[ 11.519908] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.629953] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
[ 11.884426] NET: Registered protocol family 10
[ 11.884580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.514879] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 14.514904] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8144.665872] usb 3-11: USB disconnect, device number 2
[ 8769.763667] usb 3-11: new low-speed USB device number 3 using xhci_hcd
[ 8769.908981] usb 3-11: New USB device found, idVendor=046d, idProduct=c31c
[ 8769.908983] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8769.908984] usb 3-11: Product: USB Keyboard
[ 8769.908985] usb 3-11: Manufacturer: Logitech
[ 8769.909064] usb 3-11: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8769.909067] usb 3-11: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 8769.913569] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:046D:C31C.0003/input/input8
[ 8769.913631] hid-generic 0003:046D:C31C.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-11/input0
[ 8769.920326] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/0003:046D:C31C.0004/input/input9
[ 8769.920450] hid-generic 0003:046D:C31C.0004: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-11/input1
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
