| View previous topic :: View next topic |
| Author |
Message |
syn0ptik
Apprentice
Joined: 09 Jan 2013
Posts: 267
|
 Posted: Sat Oct 11, 2014 3:44 am Post subject: xorg 2560x1440 supports |
 |
|
Hi,
someone use vesa on 2560x1440 dimentions?
I use
| Code: | Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 89.40
VertRefresh 60.00
#HorizSync 43.95
#VertRefresh 30.00
Modeline "2560x1440_60" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync
#ModeLine "2560x1440_60" 311.83 2560 2744 3024 3488 1440 1441 1444 1490 -hsync +vsync
#ModeLine "2560x1440_30" 146.27 2560 2680 2944 3328 1440 1441 1444 1465 -hsync +vsync
EndSection |
and anyway my DNS L270 27" not show me 2560x1440 only1920x1440
| Code: | # xdpyinfo | grep dimension
dimensions: 1920x1440 pixels (602x342 millimeters)
|
I use GIGABYTE GA-E350N board with AMD Radeon HD 6310.
Video seems supports maximum 2560x1440 dimentions.
Xorg.log:
| Code: | [ 859.184] (II) VESA: driver for VESA chipsets: vesa
[ 859.192] (II) VESA(0): initializing int10
[ 859.194] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 859.195] (II) VESA(0): VESA BIOS detected
[ 859.195] (II) VESA(0): VESA VBE Version 3.0
[ 859.195] (II) VESA(0): VESA VBE Total Mem: 16384 kB
[ 859.195] (II) VESA(0): VESA VBE OEM: AMD ATOMBIOS
[ 859.195] (II) VESA(0): VESA VBE OEM Software Rev: 12.36
[ 859.195] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 859.195] (II) VESA(0): VESA VBE OEM Product: WRESTLER
[ 859.195] (II) VESA(0): VESA VBE OEM Product Rev: 01.00
[ 859.246] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[ 859.246] (==) VESA(0): RGB weight 888
[ 859.246] (==) VESA(0): Default visual is TrueColor
[ 859.246] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 859.246] (II) VESA(0): VESA VBE DDC supported
[ 859.246] (II) VESA(0): VESA VBE DDC Level 2
[ 859.246] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 859.333] (II) VESA(0): VESA VBE DDC read successfully
[ 859.333] (II) VESA(0): Manufacturer: RX_ Model: 2700 Serial#: 0
[ 859.333] (II) VESA(0): Year: 2014 Week: 22
[ 859.333] (II) VESA(0): EDID Version: 1.3
[ 859.333] (II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 859.333] (II) VESA(0): Sync:
[ 859.333] (II) VESA(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 859.333] (II) VESA(0): Gamma: 2.20
[ 859.333] (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 859.333] (II) VESA(0): First detailed timing is preferred mode
[ 859.333] (II) VESA(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603
[ 859.333] (II) VESA(0): blueX: 0.143 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 859.333] (II) VESA(0): Supported established timings:
[ 859.333] (II) VESA(0): 720x400@70Hz
[ 859.333] (II) VESA(0): 640x480@60Hz
[ 859.333] (II) VESA(0): 640x480@75Hz
[ 859.333] (II) VESA(0): 800x600@56Hz
[ 859.333] (II) VESA(0): 800x600@60Hz
[ 859.333] (II) VESA(0): 800x600@72Hz
[ 859.333] (II) VESA(0): 800x600@75Hz
[ 859.333] (II) VESA(0): 1024x768@60Hz
[ 859.333] (II) VESA(0): 1024x768@75Hz
[ 859.333] (II) VESA(0): 1280x1024@75Hz
[ 859.333] (II) VESA(0): Manufacturer's mask: 0
[ 859.333] (II) VESA(0): Supported standard timings:
[ 859.333] (II) VESA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 859.333] (II) VESA(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 859.333] (II) VESA(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 859.333] (II) VESA(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 859.333] (II) VESA(0): #4: hsize: 1680 vsize 1050 refresh: 75 vid: 4019
[ 859.333] (II) VESA(0): #5: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 859.333] (II) VESA(0): Supported detailed timing:
[ 859.333] (II) VESA(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 859.333] (II) VESA(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 859.333] (II) VESA(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 859.333] (II) VESA(0): Serial No: RX2012010001
[ 859.333] (II) VESA(0): Ranges: V min: 23 V max: 76 Hz, H min: 15 H max: 99 kHz, PixClock max 255 MHz
[ 859.333] (II) VESA(0): Monitor name: QHD270 VGA
[ 859.333] (II) VESA(0): EDID (in hex):
[ 859.333] (II) VESA(0): 00ffffffffffff004b1f002700000000
[ 859.333] (II) VESA(0): 16180103603c2278ea3d85a6564a9a24
[ 859.333] (II) VESA(0): 125054a7cb00714f81c081809500b30f
[ 859.333] (II) VESA(0): d1c001010101565e00a0a0a029503020
[ 859.333] (II) VESA(0): 350055502100001e000000ff00525832
[ 859.333] (II) VESA(0): 3031323031303030310a000000fd0017
[ 859.333] (II) VESA(0): 4c0f6319000a202020202020000000fc
[ 859.333] (II) VESA(0): 00514844323730205647410a202000c8
[ 859.333] (II) VESA(0): EDID vendor "RX_", prod id 9984
[ 859.333] (II) VESA(0): Using hsync ranges from config file
[ 859.333] (II) VESA(0): Using vrefresh ranges from config file
[ 859.333] (II) VESA(0): Printing DDC gathered Modelines:
[ 859.333] (II) VESA(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync (88.8 kHz eP)
[ 859.333] (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 859.333] (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 859.333] (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 859.333] (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 859.333] (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 859.333] (II) VESA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 859.333] (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 859.333] (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 859.333] (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 859.333] (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 859.333] (II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 859.333] (II) VESA(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 859.333] (II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 859.333] (II) VESA(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 859.333] (II) VESA(0): Modeline "1680x1050"x0.0 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz e)
[ 859.333] (II) VESA(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 859.334] (II) VESA(0): Searching for matching VESA mode(s):
[ 859.391] (II) VESA(0): Total Memory: 256 64KB banks (16384kB)
[ 859.391] (II) VESA(0): Monitor0: Using hsync value of 89.40 kHz
[ 859.391] (II) VESA(0): Monitor0: Using vrefresh value of 60.00 Hz
[ 859.391] (II) VESA(0): Monitor0: Using maximum pixel clock of 255.00 MHz
[ 859.391] (WW) VESA(0): Unable to estimate virtual size
[ 859.391] (II) VESA(0): Not using built-in mode "1920x1440" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1856x1392" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1792x1344" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1400x1050" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1280x960" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1152x864" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "720x400" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "640x350" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "512x384" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
[ 859.391] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
[ 859.391] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 859.391] (II) VESA(0): Monitor0: Using hsync value of 89.40 kHz
[ 859.391] (II) VESA(0): Monitor0: Using vrefresh value of 60.00 Hz
[ 859.391] (II) VESA(0): Monitor0: Using maximum pixel clock of 255.00 MHz
[ 859.391] (WW) VESA(0): Unable to estimate virtual size
[ 859.391] (II) VESA(0): Not using built-in mode "1856x1392" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1792x1344" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1400x1050" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1280x960" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1152x864" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "800x600" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "640x480" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "720x400" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "640x350" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "512x384" (hsync out of range)
[ 859.391] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
[ 859.391] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
[ 859.392] (--) VESA(0): Virtual size is 1920x1440 (pitch 1920)
[ 859.392] (**) VESA(0): *Built-in mode "1920x1440"
[ 859.392] (**) VESA(0): Display dimensions: (600, 340) mm
[ 859.392] (**) VESA(0): DPI set to (81, 107)
[ 859.392] (II) VESA(0): Attempting to use 60Hz refresh for mode "1920x1440" (1e6)
[ 859.392] (**) VESA(0): Using "Shadow Framebuffer"
[ 859.394] (II) VESA(0): initializing int10
[ 859.395] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 859.395] (II) VESA(0): VESA BIOS detected
[ 859.395] (II) VESA(0): VESA VBE Version 3.0
[ 859.395] (II) VESA(0): VESA VBE Total Mem: 16384 kB
[ 859.395] (II) VESA(0): VESA VBE OEM: AMD ATOMBIOS
[ 859.395] (II) VESA(0): VESA VBE OEM Software Rev: 12.36
[ 859.395] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 859.395] (II) VESA(0): VESA VBE OEM Product: WRESTLER
[ 859.395] (II) VESA(0): VESA VBE OEM Product Rev: 01.00
[ 859.399] (II) VESA(0): virtual address = 0x7f64b08db000,
[ 859.410] (II) VESA(0): Setting up VESA Mode 0x1E6 (1920x1440)
[ 859.411] (II) VESA(0): VBESetVBEMode failed, mode set without customized refresh.
[ 859.571] (==) VESA(0): Default visual is TrueColor
[ 859.571] (==) VESA(0): Backing store enabled
[ 859.571] (==) VESA(0): DPMS enabled
|
|
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54216
Location: 56N 3W
|
| Posted: Sat Oct 11, 2014 8:23 am Post subject: |
|
|
syn0ptik,
The vesa driver may not support 2560x1440. Its a generic, no hardware acceleration, get you going Xorg driver.
You should use the radeon driver or the binary blob driver.
I use 2560x1440 but I have a nVidia graphics card.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
