View previous topic :: View next topic |
Author |
Message |
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Wed Jul 02, 2014 5:14 pm Post subject: Alsa, pulseaudio, skype, flash not working [SOLVED] |
|
|
A few days ago skype update caught me off guard and as a consequence i lost sound for all media sound applications.
Today i was able to get back some applications to work with alsa but most still fail.
Current working apps:
Mplayer/2
vlc
Non working apps:
skype
any browser with flash macromedia
moc player complains about (Unsupported sample size which might be some other problem)
audacious outputs (ALSA error: snd_mixer_find_selem failed) when selecting alsa and keeping SDL by default which does not work.
ekiga detects alsa and the microphone works during test but no other positive sound result comes out of it.
minitube has no sound
I was following this tutorial https://forums.gentoo.org/viewtopic-t-789181-highlight-pulseaudio.html but without success and right now it might be better to start from zero.
System does not use gnome, kde, xfce apps. Only gtk/qt and fluxbox.
3.15.2 #1 SMP Sun Jun 29 11:20:35 EDT 2014 x86_64 Intel(R) Pentium(R) 4 CPU 3.20GHz GenuineIntel GNU/Linux
# lspci
Code: | 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller (rev b1)
03:00.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:01.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:02.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:03.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:04.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:05.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
04:06.0 PCI bridge: Integrated Device Technology, Inc. [IDT] PES16T7 PCI Express Switch (rev 0d)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
0b:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
0b:01.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
0b:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
0b:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) |
Main card is:
Code: | 0b:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Kernel driver in use: snd_emu10k1 |
Sound drivers are compiled statically (*) in the kernel as they always been working like that
Skype does show pulse audio as the default card and no other card is shown in the audio options.
My user is in the pulse-access group as well as the audio group along with pulse
# eix-installed all| grep alsa
Code: | media-libs/alsa-lib-1.0.27.2
media-plugins/alsa-plugins-1.0.27-r1
media-plugins/gst-plugins-alsa-0.10.36
media-sound/alsa-utils-1.0.27.2 |
# eix-installed all| grep pulseaudio
Code: | media-sound/pulseaudio-5.0-r2 |
# emerge -pv media-libs/alsa-lib media-plugins/alsa-plugins media-plugins/gst-plugins-alsa media-sound/alsa-utils skype
Code: | These are the packages that would be merged, in order:
Calculating dependencies ... done!
[ebuild R ] media-libs/alsa-lib-1.0.27.2 USE="-alisp -debug -doc -python" ABI_X86="(-32) (64) (-x32)" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7" 886 kB
[ebuild R ] media-plugins/alsa-plugins-1.0.27-r1 USE="-debug ffmpeg jack -libsamplerate pulseaudio -speex" 356 kB
[ebuild R ] media-plugins/gst-plugins-alsa-0.10.36:0.10 2,309 kB
[ebuild R ] media-sound/alsa-utils-1.0.27.2:0.9 USE="-doc libsamplerate ncurses -nls (-selinux)" 1,117 kB
[ebuild R ~] net-im/skype-4.3.0.37 USE="-pax_kernel pulseaudio (-selinux)" 0 kB |
I would like to keep alsa controlling sound by default and pulseaudio just for skype. _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244
Last edited by HeXiLeD on Tue Aug 05, 2014 5:07 pm; edited 3 times in total |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Thu Jul 03, 2014 4:39 am Post subject: |
|
|
Key question: are you under systemd ?
If not, do you know the basics of consolekit setup ?
If yes, (no personal experience, but) chances are any of pulse-access/audio group membership might interfere.
Does the most basic aplay call produce sound ? |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Thu Jul 03, 2014 5:36 am Post subject: |
|
|
VoidMage wrote: | Key question: are you under systemd ? |
No nor i plan to; but some apps try to pull it due to some strange dependencies which i have been trying to fix.
# equery d systemd
Code: | * These packages depend on systemd:
app-admin/syslog-ng-3.4.7 (systemd ? sys-apps/systemd)
media-gfx/sane-backends-1.0.24-r3 (systemd ? sys-apps/systemd:0)
media-sound/pulseaudio-5.0-r2 (systemd ? sys-apps/systemd:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?])
net-wireless/bluez-5.18 (systemd ? sys-apps/systemd)
sys-apps/dbus-1.8.4 (systemd ? sys-apps/systemd:0)
sys-auth/pambase-20120417-r3 (systemd ? >=sys-apps/systemd-44-r1[pam])
sys-auth/polkit-0.112-r1 (systemd ? sys-apps/systemd)
sys-fs/udisks-2.1.3 (systemd ? sys-apps/systemd)
virtual/libgudev-208 (>=sys-apps/systemd-212-r5:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,gudev,introspection?,static-libs(-)?])
(>=sys-apps/systemd-208-r3:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,gudev,introspection?,static-libs(-)?])
(>=sys-apps/systemd-208:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,gudev,introspection?,static-libs(-)?])
virtual/libudev-208 (>=sys-apps/systemd-212-r5:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,static-libs(-)?])
(>=sys-apps/systemd-208-r3:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,static-libs(-)?])
(>=sys-apps/systemd-208:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,static-libs(-)?])
virtual/logger-0 (>=sys-apps/systemd-38)
virtual/service-manager-0 (kernel_linux ? sys-apps/systemd)
virtual/udev-208-r2 (>=sys-apps/systemd-208:0) |
VoidMage wrote: |
If not, do you know the basics of consolekit setup ? |
Never used it.
VoidMage wrote: |
If yes, (no personal experience, but) chances are any of pulse-access/audio group membership might interfere. |
No clue
VoidMage wrote: |
Does the most basic aplay call produce sound ? |
aplay -vv file.wav
Code: | Playing WAVE 'file.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
ALSA <-> PulseAudio PCM I/O Plugin
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : U8
subformat : STD
channels : 1
rate : 11025
exact rate : 11025 (11025/1)
msbits : 8
buffer_size : 5513
period_size : 1378
period_time : 125000
tstamp_mode : NONE
period_step : 1
avail_min : 1378
period_event : 0
start_threshold : 5513
stop_threshold : 5513
silence_threshold: 0
silence_size : 0
boundary : 6207086186423386112
|
No sound
Tested:
Code: | speaker-test -Dplug:surround51 -c6 |
and it works _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
v_andal Guru
Joined: 26 Aug 2008 Posts: 541 Location: Germany
|
Posted: Thu Jul 03, 2014 6:31 am Post subject: |
|
|
The simplest would be to mask new version of skype and stay without pulseaudio. That's what I did, because once upon a time I've also tried to configure pulseaudio and only got big mess. I use only sawfish, so I don't have neither consolekit nor polkit, so to start all of that mess just because of newer version of Skype - nonsense. |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Thu Jul 03, 2014 11:25 am Post subject: |
|
|
Well, as you're not under systemd, being in audio group might be enough for pulseaudio to work without consolekit, but it might be quirky at times.
Did you check (perhaps by using alsamixer) if the device is not muted ?
You might also want to see with 'pactl list' if pulseaudio is picking the correct device (as it might be picking one, that has no speakers connected). |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Thu Jul 03, 2014 2:23 pm Post subject: |
|
|
@ v_andal i have considered doing that and mask skype for all my systems since i did it for the netbook but until when ? It will be a matter of time until we will all have to move to a newer skype version.
@ VoidMage i have checked that all my sound devices are not muted and 'pactl list' outputs an error
# pactl list
Code: | Connection failure: Connection refused
pa_context_connect() failed: Connection refused
|
_________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Thu Jul 03, 2014 4:20 pm Post subject: |
|
|
HeXiLeD wrote: | @ VoidMage i have checked that all my sound devices are not muted and 'pactl list' outputs an error
# pactl list
Code: | Connection failure: Connection refused
pa_context_connect() failed: Connection refused
|
|
...pulseaudio is being run by you (a normal user), right ?
If you run the daemon in the foreground with verbose output, does it print anything interesting ? |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Thu Jul 03, 2014 5:15 pm Post subject: |
|
|
Code: | E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed. |
Code: | user 3498 0.0 0.2 574456 9632 ? Sl 10:17 0:05 /usr/bin/pulseaudio --start --log-target=syslog |
On one of my netbooks i installed skype with pulseaudio without modifying or changing anything around. Everything works with the difference that alsamixer pulls pulse as the default sound card and the hardware sound card as card 0. All sound works except skype mic.
Also fund that i have some issues with udev, gudev and systemd
For example i have no idea why i need this:
Code: | root 1289 0.0 0.0 30528 2080 ? Ss 10:15 0:00 /lib/systemd/systemd-udevd --daemon |
_________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Thu Jul 03, 2014 7:04 pm Post subject: |
|
|
'/lib/systemd/systemd-udevd' is a not a problem - upstream changed the name of the binary awhile ago.
Are you sure that only one user is running pulseadio ?
Without consolekit in place, instances run by different user will conflict.
(actually, if one of the users is root or more than one is in audio group, there stil might be a problem) |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Fri Jul 04, 2014 12:29 am Post subject: |
|
|
There is quite a big mess in my desktop system in regards to package dependencies most of them either in conflict or pulling systemd related packages.
The reason why systemd crap is keep surfacing is because of some gnome-base/* packages that some people like to say that just because it says gnome it does not mean it is gnome. I call it BS.
What was once one or two gnome-base packages turned out to go over 25 in the desktop which slowly lead to use flags changes ending up by pulling udisks support, gudev support, different verisons of udev and more gnome crap. Like CRAP wit the name gnome.
I have been cleaning 3 systems from gnome named packages but still have problems with the desktop.
One of the netbooks has full working sound for all apps but only outputs sound for skype. Skype cam and mic do not work.
The desktop is still going under heavy cleanup but i found that adding:
Code: | pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
} |
To .asoundrc for the user; will bring back the sound for the browser and a few more apps. However no changes for skype.
On the desktop skype cam works and uses the same driver as for the netbook. Mic does not work yet.
This tells me that pulse is taking over in a strange way since the netbook does not have .asoundrc settings and sound does work for most of it's applications.
The netbook also does not have pulseaudio group and or pulse-user group in /etc/group . There is no pulse* group of any kind.
As for the desktop:
# cat /etc/group | grep pulse
Code: | audio:x:18:user,pulse
realtime:x:1028:user,pulse
pulse-access:x:1030:
pulse:x:1031: |
In regard to installed packages; both the netbook and the desktop have the same *pulse* packages installed:
# eix-installed all | grep pulse
Code: | media-sound/pulseaudio-5.0-r2 |
media-plugins/alsa-plugins is compiled with pulseaudio support. _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Fri Jul 04, 2014 1:43 am Post subject: |
|
|
The above .asoundrc is pretty much breaking pulseaudio.
The default minimal for pulseaudio is:
Code: | pcm.!default {
type pulse
}
ctl.!default {
type pulse
} |
(it's installed by alsa-plugins[pulseaudio] IIRC)
The way pulseaudio works (at least to my flawed understanding) is by taking exclusive control of the audio device, the one you're using makes random apps take it.
(btw, if you don't know the upstream of udev *is* systemd - it's the same tarball)
It's been working that way for me since well before before pulseaudio 1.0. (my /etc/groups greps about the same - I'm not under systemd)
(on unrelated note: a few packages in gnome-base/ aren't really gnome - chief example being gvfs)
Also, you did read 'man pulseaudio', right ?
Check which app is holding the soundcard while 'pactl' fails. |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Mon Jul 07, 2014 1:08 am Post subject: |
|
|
I have been rebuilding the system during the weekend and fix some desktop errors and a couple things got better. However skype sound is still not solved.
VoidMage wrote: | The above .asoundrc is pretty much breaking pulseaudio.
The default minimal for pulseaudio is:
Code: | pcm.!default {
type pulse
}
ctl.!default {
type pulse
} |
(it's installed by alsa-plugins[pulseaudio] IIRC) |
Might be; on the netbook i do not even have .asoundrc and skype outputs sound; input is still not working.
pactl list does not work in any of the systems when executed by root. works in both when executed by the user and pulse audio runs in the user account only for bother systems and not as deamon.
# ps aux | grep pulse
Code: | user 3980 0.0 0.1 574460 7160 ? Sl 11:02 0:02 /usr/bin/pulseaudio --start --log-target=syslog |
As for the desktop; the minimal .asoundrc example given does not work. The only way i can make any browser out put sound is with the other example i posted before.
Code: |
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "5.0"
Module #6
Name: module-alsa-card
Argument: device_id="2" name="usb-046d_0990_6CB3DD11-02-Q9000" card_name="alsa_card.usb-046d_0990_6CB3DD11-02-Q9000" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #7
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #8
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_0b_01.0" card_name="alsa_card.pci-0000_0b_01.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #9
Name: module-jackdbus-detect
Argument: channels=2
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "5.0"
Module #10
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "5.0"
Module #11
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "5.0"
Module #12
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "5.0"
Module #13
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #14
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "5.0"
Module #15
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "5.0"
Module #16
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "5.0"
Module #17
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "5.0"
Module #18
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "5.0"
Module #19
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "5.0"
Module #20
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #21
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "5.0"
Module #22
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #23
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "5.0"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD1989B Analog"
alsa.id = "AD1989B Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "P5Q Deluxe Motherboard"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Analog Devices AD1989B"
alsa.components = "HDA:11d4989b,10438311,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9900, not available)
analog-output-headphones: Headphones (priority: 9000, not available)
Active Port: analog-output-headphones
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_0b_01.0.analog-stereo
Description: SB0090 Audigy Player Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 26904 / 41% / -23.20 dB, front-right: 26904 / 41% / -23.20 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0b_01.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ADC Capture/Standard PCM Playback"
alsa.id = "emu10k1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "SB Audigy 1 [SB0090]"
alsa.long_card_name = "SB Audigy 1 [SB0090] (rev.3, serial:0x511102) at 0xe880, irq 17"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:0b:01.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:0b:01.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB0090 Audigy Player"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "65536"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "SB0090 Audigy Player Analog Stereo"
alsa.mixer_name = "TriTech TR28602"
alsa.components = "AC97a:54524123"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output;output-amplifier-on: Analog Output / Amplifier (priority: 9910)
analog-output;output-amplifier-off: Analog Output / No Amplifier (priority: 9900)
Active Port: analog-output;output-amplifier-on
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_input.usb-046d_0990_6CB3DD11-02-Q9000.analog-mono
Description: QuickCam Pro 9000 Analog Mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 16000Hz
Channel Map: mono
Owner Module: 6
Mute: no
Volume: mono: 65535 / 100% / -0.00 dB
balance 0.00
Base Volume: 20724 / 32% / -30.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "QuickCam Pro 9000"
alsa.long_card_name = "Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:1a.7-5.2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.7-usb-0:5.2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.2/sound/card2"
udev.id = "usb-046d_0990_6CB3DD11-02-Q9000"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0990"
device.product.name = "QuickCam Pro 9000"
device.serial = "046d_0990_6CB3DD11"
device.form_factor = "webcam"
device.string = "hw:2"
device.buffering.buffer_size = "3198"
device.buffering.fragment_size = "798"
device.access_mode = "mmap"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "QuickCam Pro 9000 Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0990"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "P5Q Deluxe Motherboard"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #2
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 8739 / 13% / -52.50 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "AD1989B Analog"
alsa.id = "AD1989B Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "P5Q Deluxe Motherboard"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Analog Devices AD1989B"
alsa.components = "HDA:11d4989b,10438311,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not available)
analog-input-rear-mic: Rear Microphone (priority: 8200, not available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-linein
Formats:
pcm
Source #3
State: SUSPENDED
Name: alsa_output.pci-0000_0b_01.0.analog-stereo.monitor
Description: Monitor of SB0090 Audigy Player Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_0b_01.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of SB0090 Audigy Player Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "SB Audigy 1 [SB0090]"
alsa.long_card_name = "SB Audigy 1 [SB0090] (rev.3, serial:0x511102) at 0xe880, irq 17"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:0b:01.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:0b:01.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB0090 Audigy Player"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #4
State: SUSPENDED
Name: alsa_input.pci-0000_0b_01.0.analog-stereo
Description: SB0090 Audigy Player Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ADC Capture/Standard PCM Playback"
alsa.id = "emu10k1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "SB Audigy 1 [SB0090]"
alsa.long_card_name = "SB Audigy 1 [SB0090] (rev.3, serial:0x511102) at 0xe880, irq 17"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:0b:01.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:0b:01.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB0090 Audigy Player"
device.string = "hw:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "SB0090 Audigy Player Analog Stereo"
alsa.mixer_name = "TriTech TR28602"
alsa.components = "AC97a:54524123"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Client #0
Driver: module-console-kit.c
Owner Module: 19
Properties:
application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
console-kit.session = "/org/freedesktop/ConsoleKit/Session1"
Client #8
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "Skype"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.process.id = "20380"
application.process.user = "mike"
application.process.host = "gentrix"
application.process.binary = "skype"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "68224519d626ba78ebc43f300004886e"
application.icon_name = "skype"
Client #10
Driver: protocol-native.c
Owner Module: 13
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.process.id = "5185"
application.process.user = "mike"
application.process.host = "gentrix"
application.process.binary = "pactl"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id = "68224519d626ba78ebc43f300004886e"
Card #0
Name: alsa_card.usb-046d_0990_6CB3DD11-02-Q9000
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "2"
alsa.card_name = "QuickCam Pro 9000"
alsa.long_card_name = "Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:1a.7-5.2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1a.7-usb-0:5.2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.2/sound/card2"
udev.id = "usb-046d_0990_6CB3DD11-02-Q9000"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0990"
device.product.name = "QuickCam Pro 9000"
device.serial = "046d_0990_6CB3DD11"
device.form_factor = "webcam"
device.string = "2"
device.description = "QuickCam Pro 9000"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-mono
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono
Card #1
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 22"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "P5Q Deluxe Motherboard"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, not available)
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, not available)
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
Card #2
Name: alsa_card.pci-0000_0b_01.0
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "0"
alsa.card_name = "SB Audigy 1 [SB0090]"
alsa.long_card_name = "SB Audigy 1 [SB0090] (rev.3, serial:0x511102) at 0xe880, irq 17"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:0b:01.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:0b:01.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB0090 Audigy Player"
device.string = "0"
device.description = "SB0090 Audigy Player"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:analog-mono+input:analog-mono: Analog Mono Duplex (sinks: 1, sources: 1, priority: 101, available: yes)
output:analog-mono+input:analog-stereo: Analog Mono Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 160, available: yes)
output:analog-mono+input:iec958-stereo: Analog Mono Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 155, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-mono: Analog Stereo Output + Analog Mono Input (sinks: 1, sources: 1, priority: 6001, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-mono: Analog Surround 4.0 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 701, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-mono: Analog Surround 4.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 801, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-mono: Analog Surround 5.0 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 701, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-mono: Analog Surround 5.1 Output + Analog Mono Input (sinks: 1, sources: 1, priority: 801, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-mono: Digital Stereo (IEC958) Output + Analog Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): input:iec958-stereo, output:analog-mono+input:iec958-stereo
analog-output;output-amplifier-on: Analog Output / Amplifier (priority: 9910, latency offset: 0 usec)
Part of profile(s): output:analog-mono, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-mono+input:iec958-stereo, output:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo
analog-output;output-amplifier-off: Analog Output / No Amplifier (priority: 9900, latency offset: 0 usec)
Part of profile(s): output:analog-mono, output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo, output:analog-mono+input:iec958-stereo, output:analog-stereo, output:analog-stereo+input:analog-mono, output:analog-stereo+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-mono, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-mono, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-mono, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-mono, output:analog-surround-51+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
|
man pulseaudio does not seem to help much.
In the middle of all this i also found something strange that never happened to me before.
virtual/udev and sys-fs/udev force me to use the gudev flag regardless of having it as -gudev in make.conf or package.use .
If fact it overrides my settings even if i have -gudev in bother make.conf and package.use and does not even complain about the need for that flag as it simply overrides the setup and gets read to emerge */udev with gudev support.
I am out of ideas at the moment. At least both netbook and desktop should be having the same problems and they are not. For some reason i get sound on the netbook without any changes. _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Mon Jul 07, 2014 7:41 am Post subject: |
|
|
In the light of pactl output (I hope it was under my .asoundrc; also, that it was from the *not* working machine), what does 'paplay -v --raw /dev/urandom' output to the console ? Does it produce noise ?
What's not working in skype (input or output) ?
There's the thing, that pulseaudio volumes are put on top of the device ones, so you'll likely need to set the device ones to max (via - for example - alsamixer).
What I'd call a ham-fisted way of dealing with the problem, would be installing pavucontrol (note the gtkmm deps) and observing the streams there. |
|
Back to top |
|
|
phobos13013 Apprentice
Joined: 22 Sep 2004 Posts: 277 Location: PNW
|
Posted: Tue Jul 08, 2014 6:54 am Post subject: |
|
|
Hi, all. I have just run into this problem myself. I have been updating a very old system and finally got it back on its feet so decided to install skype which pulled pulseaudio, my sys configuration is very similar to yours Hex, at least in terms of sw config.
Anyway, I managed to get the audio working following the same guide you showed in the intial post but when I tinkering with things mostly related to utf encoding i restarted and my audio is borked.
Here is one thing I noticed. Just before getting it working, my alsamixer showed a my hw soundcard device in alsa mixer, but now all as user it is missing except for default. Meanwhile if i run alsamixer as root, I have a different apparence to the board and the sound card is visible in there. There are a few other issues related to this announced on the site in the past, but they dont seem to be resolved. Any idea how to get the user to acces the snd card module? _________________ ...and it should be known by now |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Tue Jul 08, 2014 10:34 am Post subject: |
|
|
@phobos13013:
Look at the top right corner of alsamixer and take a guess. |
|
Back to top |
|
|
phobos13013 Apprentice
Joined: 22 Sep 2004 Posts: 277 Location: PNW
|
Posted: Wed Jul 09, 2014 12:55 am Post subject: |
|
|
Voidmage,
Fun! I have always thought of gentoo as more than just a distribution, but like a puzzle or a game, so I will definitely sit here and look at that corner to try and advance in the game
Cheers! _________________ ...and it should be known by now |
|
Back to top |
|
|
Holysword l33t
Joined: 19 Nov 2006 Posts: 946 Location: Greece
|
Posted: Sun Jul 13, 2014 5:28 pm Post subject: |
|
|
phobos13013 wrote: | Voidmage,
Fun! I have always thought of gentoo as more than just a distribution, but like a puzzle or a game, so I will definitely sit here and look at that corner to try and advance in the game
Cheers! |
He seem to have this problem.
I hate to be this person (again) but the only solution when dealing with pulseaudio is "uninstall pulseaudio". I personally migrated to Google Hangouts. _________________ "Nolite arbitrari quia venerim mittere pacem in terram non veni pacem mittere sed gladium" (Yeshua Ha Mashiach) |
|
Back to top |
|
|
VoidMage Watchman
Joined: 14 Oct 2006 Posts: 6196
|
Posted: Sun Jul 13, 2014 11:49 pm Post subject: |
|
|
Holysword wrote: | phobos13013 wrote: | Voidmage,
Fun! I have always thought of gentoo as more than just a distribution, but like a puzzle or a game, so I will definitely sit here and look at that corner to try and advance in the game
Cheers! |
He seem to have this problem.
I hate to be this person (again) but the only solution when dealing with pulseaudio is "uninstall pulseaudio". I personally migrated to Google Hangouts. |
...and personally, I'm still of a strong opinion, that most pulseaudio problems for a few years already are of local misconfiguration type.
Back in its early days (shortly after timer mode was introduced), pulseaudio had its fair share of maturing pains, but it's been awhile since. |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Wed Jul 23, 2014 11:29 am Post subject: |
|
|
@ VoidMage
I re-emerge system and world, deleted some changed configuration files for media setups and got a few things fixed. The rest seemed t get fixed after emerging pavucontrol which for example; brought up a new menu on skype and helped out adjusting things.
Right now i have the desktop almost all fixed but have not touched the netbooks yet. Today i got skype microphone to work and that concluded skype fixes.
A couple other issues are now with a few apps:
mplayer automatically shoots alsa PCM to max due to pulseaudio which causes a lot of static. I cant have alsa pcm or master at max because it causes static noise.
minitube does not have sound. Not sure why.
$ minitube
Code: | QPainter::begin: Paint device returned engine == 0, type: 3
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: Phonon::createPath: Cannot connect Phonon::MediaObject ( no objectName ) to Phonon::AudioOutput ( no objectName ).
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: bool Phonon::FactoryPrivate::createBackend() phonon backend plugin could not be loaded
WARNING: Phonon::createPath: Cannot connect Phonon::MediaObject ( no objectName ) to Phonon::VideoWidget ( no objectName ). |
mocp outputs Unsupported sample size! which might be due to this http://moc.daper.net/node/881
but i also get:
Code: | Running the server...
Trying JACK...
Trying ALSA...
FATAL_ERROR: Can't receive value from the server |
_________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
HeXiLeD Veteran
Joined: 20 Aug 2005 Posts: 1159 Location: Online
|
Posted: Tue Aug 05, 2014 5:07 pm Post subject: |
|
|
Minitube problem was related to phonon and mocp related to ffmpeg.
The rest of sound problems with pulse audio were resolved after emerging pavucontrol and rebuilding some broken packages.
Simultaneously some of these problems had broken packages that caused difficulties finding solution to fix sound problems.
Currently i all my systems use default pulseaudio configurations. The only change for the desktop at the moment is:
Code: | $ cat .asoundrc
pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
} |
All problems have been [SOLVED] _________________ Do you hear the sound of inevitability?
With age, comes great grumpiness and that, was 20 years ago...
CertFP: becbbd161d5a5c31de3c45171b77bf710911db29 / d985d21f89fe2977b593c4d381a1a86802e62990d9328d893db76d59f9935244 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|