View previous topic :: View next topic |
Author |
Message |
ftomassetti n00b
Joined: 28 Oct 2013 Posts: 17
|
Posted: Wed Oct 30, 2013 5:32 pm Post subject: Intel Wireless 7260 |
|
|
Hi,
ifconfig -a do not list my card, iwlwifi fails to activate it because firmware is missing:
Code: |
dmesg | grep iwlwifi
[ 2.856317] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.860431] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7260-6.ucode' failed.
[ 2.860434] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 75.593691] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 75.594398] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7260-6.ucode' failed.
[ 75.594401] iwlwifi 0000:03:00.0: no suitable firmware found!
|
I have emerged linux-firmware and it seems I have a newer firmware:
Code: |
ls /lib/firmware/iwlwifi-*
/lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5000-2.ucode
/lib/firmware/iwlwifi-1000-3.ucode /lib/firmware/iwlwifi-5000-5.ucode
/lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5150-2.ucode
/lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode
/lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode
/lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode
/lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-5.ucode
/lib/firmware/iwlwifi-3160-7.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode
/lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-4.ucode
/lib/firmware/iwlwifi-4965-2.ucode /lib/firmware/iwlwifi-6050-5.ucode
/lib/firmware/iwlwifi-5000-1.ucode /lib/firmware/iwlwifi-7260-7.ucode
|
lspci output:
Code: |
lspci | grep -i network
03:00.0 Network controller: Intel Corporation Device 08b1 (rev 73)
|
I am using gentoo sources (3.10.7-gentoo-r1).
Any suggestions? |
|
Back to top |
|
|
Gusar Advocate
Joined: 09 Apr 2005 Posts: 2665 Location: Slovenia
|
Posted: Wed Oct 30, 2013 5:54 pm Post subject: |
|
|
Your kernel is too old. You need at least 3.11 |
|
Back to top |
|
|
ftomassetti n00b
Joined: 28 Oct 2013 Posts: 17
|
Posted: Wed Oct 30, 2013 6:00 pm Post subject: |
|
|
Does it mean to use something different from gentoo-sources?
Wouldn't be a mess to switch to vanilla-sources (I would not know how to configure a kernel from scratch...) |
|
Back to top |
|
|
ftomassetti n00b
Joined: 28 Oct 2013 Posts: 17
|
Posted: Sat Nov 09, 2013 9:40 am Post subject: |
|
|
In the end I used vanilla-sources coping just the .config file.
Thanks.
Still, the driver is buggy (more on that in another thread) |
|
Back to top |
|
|
|