| View previous topic :: View next topic |
| Author |
Message |
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
 |
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
 Posted: Tue Nov 05, 2013 2:59 am Post subject: |
 |
|
| Jaglover wrote: | | What USE flags were enabled for xorg-server build? Your log is definitely weird, it seems like xorg stops loading itself. |
Not necessarily - it might be this log is a result of a hard power off, then - in a way - it would be complete. |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Tue Nov 05, 2013 9:40 am Post subject: |
|
|
VoidMage...
| Code: | #udevadm info /dev/input/keyboard
Unknown device, --name=, --path=, or absolute path in /dev or /sys expected.
#udevadm info /dev/input/mouse
Unknown device, --name=, --path=, or absolute path in /dev or /sys expected.
#udevadm info --path=/dev/input/keyboard
syspath not found |
Again I don't know WTF to do can you just tell me what you need to see cause this is going nowhere. |
|
| Back to top |
|
|
trismo
n00b
Joined: 26 May 2012
Posts: 49
|
| Posted: Tue Nov 05, 2013 2:21 pm Post subject: |
|
|
please post kernel '.config' wgetpaste
i think your kernel config missing few options
and output lspci -n & lsusb |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Tue Nov 05, 2013 3:30 pm Post subject: |
|
|
| <3 wrote: | | Again I don't know WTF to do can you just tell me what you need to see cause this is going nowhere. |
I'd say this asks for a RTFM response, but whatever...
The syntax in the first attempt is almost correct.
Try again with '/dev/input/event*' (that is for each 'event*' node - we don't know which nodes will correspond to mouse/keyboard and that can change every now and then anyway).
Though either confirm or deny my guess about power off.
What I'm trying to establish here is whether udev is working correctly (in the relevant part) both by itself and on kernel/userspace boundary.
On that note: any chance you've recently moved to systemd ? |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Tue Nov 05, 2013 7:51 pm Post subject: |
|
|
| .config I am still using openrc |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Tue Nov 05, 2013 10:19 pm Post subject: |
|
|
Here is the output of lspci, for some reason lsusb is giving me a libusb error. I am searching how to fix that now. | Code: | 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05)
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
06:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
08:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 10)
0b:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
0c:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0c:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
0c:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) |
|
|
| Back to top |
|
|
trismo
n00b
Joined: 26 May 2012
Posts: 49
|
| Posted: Wed Nov 06, 2013 12:23 pm Post subject: |
|
|
i want the output from
easy to find hardware kernel module with this
libusb error is probably cause the problem with no working usb mouse keyboard ?
kernel config look good | kernel print support is set use cups with '-usb' useflag package.use
and check global usb flag is set in emerge --info under "USE="...usb..." |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Thu Nov 07, 2013 10:11 am Post subject: |
|
|
I doubt it's a libusb problem, I also tried booting with an old ps/2 keyboard. Still didn't work.
I posted my kernel .config above as you can see USB support is enabled. Also the keyboard works fine outside of X in the console.
Last edited by <3 on Thu Nov 07, 2013 11:15 am; edited 1 time in total |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Thu Nov 07, 2013 11:07 am Post subject: |
|
|
I piped the output to a text file then manually typed in the commands so hopefully I didn't make any mistake so here is my udevadm info output. I'm not sure what these "events mean but events 4 & 5 correctly identify my mouse and keyboard as razor deathadder and razor deathstalker.
| Code: | #lspci -n
00:00.0 0600: 8086:d131 (rev 11)
00:03.0 0604: 8086:d138 (rev 11)
00:08.0 0880: 8086:d155 (rev 11)
00:08.1 0880: 8086:d156 (rev 11)
00:08.2 0880: 8086:d157 (rev 11)
00:08.3 0880: 8086:d158 (rev 11)
00:10.0 0880: 8086:d150 (rev 11)
00:10.1 0880: 8086:d151 (rev 11)
00:1a.0 0c03: 8086:3b3c (rev 05)
00:1b.0 0403: 8086:3b56 (rev 05)
00:1c.0 0604: 8086:3b42 (rev 05)
00:1c.4 0604: 8086:3b4a (rev 05)
00:1c.5 0604: 8086:3b4c (rev 05)
00:1c.6 0604: 8086:3b4e (rev 05)
00:1c.7 0604: 8086:3b50 (rev 05)
00:1d.0 0c03: 8086:3b34 (rev 05)
00:1e.0 0604: 8086:244e (rev a5)
00:1f.0 0601: 8086:3b02 (rev 05)
00:1f.2 0106: 8086:3b22 (rev 05)
00:1f.3 0c05: 8086:3b30 (rev 05)
01:00.0 0300: 10de:0641 (rev a1)
03:00.0 0106: 197b:2363 (rev 03)
03:00.1 0101: 197b:2363 (rev 03)
05:00.0 0200: 10ec:8168 (rev 03)
06:00.0 0604: 10b5:8608 (rev ba)
07:01.0 0604: 10b5:8608 (rev ba)
07:05.0 0604: 10b5:8608 (rev ba)
07:07.0 0604: 10b5:8608 (rev ba)
07:09.0 0604: 10b5:8608 (rev ba)
08:00.0 0c03: 1033:0194 (rev 03)
09:00.0 0106: 1b4b:9123 (rev 10)
0b:00.0 0200: 8086:10d3
0c:02.0 0401: 1102:0004 (rev 04)
0c:02.1 0980: 1102:7003 (rev 04)
0c:02.2 0c00: 1102:4001 (rev 04)
3f:00.0 0600: 8086:2c51 (rev 04)
3f:00.1 0600: 8086:2c81 (rev 04)
3f:02.0 0600: 8086:2c90 (rev 04)
3f:02.1 0600: 8086:2c91 (rev 04)
3f:03.0 0600: 8086:2c98 (rev 04)
3f:03.1 0600: 8086:2c99 (rev 04)
3f:03.4 0600: 8086:2c9c (rev 04)
3f:04.0 0600: 8086:2ca0 (rev 04)
3f:04.1 0600: 8086:2ca1 (rev 04)
3f:04.2 0600: 8086:2ca2 (rev 04)
3f:04.3 0600: 8086:2ca3 (rev 04)
3f:05.0 0600: 8086:2ca8 (rev 04)
3f:05.1 0600: 8086:2ca9 (rev 04)
3f:05.2 0600: 8086:2caa (rev 04)
3f:05.3 0600: 8086:2cab (rev 04)
|
| Code: | ls /dev/input/
crw------- 1 root root 13, 64 Oct 9 19:39 /dev/input/event0
crw------- 1 root root 13, 65 Oct 9 19:39 /dev/input/event1
crw------- 1 root root 13, 74 Oct 9 19:39 /dev/input/event10
crw------- 1 root root 13, 75 Oct 9 19:39 /dev/input/event11
crw------- 1 root root 13, 76 Oct 9 19:39 /dev/input/event12
crw------- 1 root root 13, 77 Oct 9 19:39 /dev/input/event13
crw------- 1 root root 13, 78 Oct 9 19:39 /dev/input/event14
crw------- 1 root root 13, 79 Oct 9 19:39 /dev/input/event15
crw------- 1 root root 13, 80 Oct 9 19:39 /dev/input/event16
crw------- 1 root root 13, 81 Oct 9 19:39 /dev/input/event17
crw------- 1 root root 13, 82 Oct 9 19:39 /dev/input/event18
crw------- 1 root root 13, 83 Oct 9 19:39 /dev/input/event19
crw------- 1 root root 13, 66 Oct 9 19:39 /dev/input/event2
crw------- 1 root root 13, 84 Oct 9 19:39 /dev/input/event20
crw------- 1 root root 13, 85 Oct 9 19:39 /dev/input/event21
crw------- 1 root root 13, 86 Oct 9 19:39 /dev/input/event22
crw------- 1 root root 13, 87 Oct 9 19:39 /dev/input/event23
crw------- 1 root root 13, 88 Oct 9 19:39 /dev/input/event24
crw------- 1 root root 13, 89 Oct 9 19:39 /dev/input/event25
crw------- 1 root root 13, 90 Oct 9 19:39 /dev/input/event26
crw------- 1 root root 13, 91 Oct 9 19:39 /dev/input/event27
crw------- 1 root root 13, 92 Oct 9 19:39 /dev/input/event28
crw------- 1 root root 13, 93 Oct 9 19:39 /dev/input/event29
crw------- 1 root root 13, 67 Oct 9 19:39 /dev/input/event3
crw------- 1 root root 13, 94 Oct 9 19:39 /dev/input/event30
crw------- 1 root root 13, 95 Oct 9 19:39 /dev/input/event31
crw------- 1 root root 13, 68 Oct 9 19:39 /dev/input/event4
crw------- 1 root root 13, 69 Oct 9 19:39 /dev/input/event5
crw------- 1 root root 13, 70 Oct 9 19:39 /dev/input/event6
crw------- 1 root root 13, 71 Oct 9 19:39 /dev/input/event7
crw------- 1 root root 13, 72 Oct 9 19:39 /dev/input/event8
crw------- 1 root root 13, 73 Oct 9 19:39 /dev/input/event9
crw------- 1 root root 13, 0 Oct 9 19:39 /dev/input/js0
crw------- 1 root root 13, 1 Oct 9 19:39 /dev/input/js1
crw------- 1 root root 13, 10 Oct 9 19:39 /dev/input/js10
crw------- 1 root root 13, 11 Oct 9 19:39 /dev/input/js11
crw------- 1 root root 13, 12 Oct 9 19:39 /dev/input/js12
crw------- 1 root root 13, 13 Oct 9 19:39 /dev/input/js13
crw------- 1 root root 13, 14 Oct 9 19:39 /dev/input/js14
crw------- 1 root root 13, 15 Oct 9 19:39 /dev/input/js15
crw------- 1 root root 13, 16 Oct 9 19:39 /dev/input/js16
crw------- 1 root root 13, 17 Oct 9 19:39 /dev/input/js17
crw------- 1 root root 13, 18 Oct 9 19:39 /dev/input/js18
crw------- 1 root root 13, 19 Oct 9 19:39 /dev/input/js19
crw------- 1 root root 13, 2 Oct 9 19:39 /dev/input/js2
crw------- 1 root root 13, 20 Oct 9 19:39 /dev/input/js20
crw------- 1 root root 13, 21 Oct 9 19:39 /dev/input/js21
crw------- 1 root root 13, 22 Oct 9 19:39 /dev/input/js22
crw------- 1 root root 13, 23 Oct 9 19:39 /dev/input/js23
crw------- 1 root root 13, 24 Oct 9 19:39 /dev/input/js24
crw------- 1 root root 13, 25 Oct 9 19:39 /dev/input/js25
crw------- 1 root root 13, 26 Oct 9 19:39 /dev/input/js26
crw------- 1 root root 13, 27 Oct 9 19:39 /dev/input/js27
crw------- 1 root root 13, 28 Oct 9 19:39 /dev/input/js28
crw------- 1 root root 13, 29 Oct 9 19:39 /dev/input/js29
crw------- 1 root root 13, 3 Oct 9 19:39 /dev/input/js3
crw------- 1 root root 13, 30 Oct 9 19:39 /dev/input/js30
crw------- 1 root root 13, 31 Oct 9 19:39 /dev/input/js31
crw------- 1 root root 13, 4 Oct 9 19:39 /dev/input/js4
crw------- 1 root root 13, 5 Oct 9 19:39 /dev/input/js5
crw------- 1 root root 13, 6 Oct 9 19:39 /dev/input/js6
crw------- 1 root root 13, 7 Oct 9 19:39 /dev/input/js7
crw------- 1 root root 13, 8 Oct 9 19:39 /dev/input/js8
crw------- 1 root root 13, 9 Oct 9 19:39 /dev/input/js9
crw------- 1 root root 10, 150 Oct 9 19:39 /dev/input/keyboard
crw------- 1 root root 13, 63 Oct 9 19:39 /dev/input/mice
crw------- 1 root root 10, 149 Oct 9 19:39 /dev/input/mouse
crw------- 1 root root 13, 32 Oct 9 19:39 /dev/input/mouse0
crw------- 1 root root 13, 33 Oct 9 19:39 /dev/input/mouse1
crw------- 1 root root 13, 42 Oct 9 19:39 /dev/input/mouse10
crw------- 1 root root 13, 43 Oct 9 19:39 /dev/input/mouse11
crw------- 1 root root 13, 44 Oct 9 19:39 /dev/input/mouse12
crw------- 1 root root 13, 45 Oct 9 19:39 /dev/input/mouse13
crw------- 1 root root 13, 46 Oct 9 19:39 /dev/input/mouse14
crw------- 1 root root 13, 47 Oct 9 19:39 /dev/input/mouse15
crw------- 1 root root 13, 48 Oct 9 19:39 /dev/input/mouse16
crw------- 1 root root 13, 49 Oct 9 19:39 /dev/input/mouse17
crw------- 1 root root 13, 50 Oct 9 19:39 /dev/input/mouse18
crw------- 1 root root 13, 51 Oct 9 19:39 /dev/input/mouse19
crw------- 1 root root 13, 34 Oct 9 19:39 /dev/input/mouse2
crw------- 1 root root 13, 52 Oct 9 19:39 /dev/input/mouse20
crw------- 1 root root 13, 53 Oct 9 19:39 /dev/input/mouse21
crw------- 1 root root 13, 54 Oct 9 19:39 /dev/input/mouse22
crw------- 1 root root 13, 55 Oct 9 19:39 /dev/input/mouse23
crw------- 1 root root 13, 56 Oct 9 19:39 /dev/input/mouse24
crw------- 1 root root 13, 57 Oct 9 19:39 /dev/input/mouse25
crw------- 1 root root 13, 58 Oct 9 19:39 /dev/input/mouse26
crw------- 1 root root 13, 59 Oct 9 19:39 /dev/input/mouse27
crw------- 1 root root 13, 60 Oct 9 19:39 /dev/input/mouse28
crw------- 1 root root 13, 61 Oct 9 19:39 /dev/input/mouse29
crw------- 1 root root 13, 35 Oct 9 19:39 /dev/input/mouse3
crw------- 1 root root 13, 62 Oct 9 19:39 /dev/input/mouse30
crw------- 1 root root 13, 36 Oct 9 19:39 /dev/input/mouse4
crw------- 1 root root 13, 37 Oct 9 19:39 /dev/input/mouse5
crw------- 1 root root 13, 38 Oct 9 19:39 /dev/input/mouse6
crw------- 1 root root 13, 39 Oct 9 19:39 /dev/input/mouse7
crw------- 1 root root 13, 40 Oct 9 19:39 /dev/input/mouse8
crw------- 1 root root 13, 41 Oct 9 19:39 /dev/input/mouse9
crw------- 1 root root 10, 223 Oct 9 19:39 /dev/input/uinput
|
| Code: |
#udevadm info /dev/input/event0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
#udevadm info /dev/input/event1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
#udevadm info /dev/input/event2
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=40001
B: SND=6
#udevadm info /dev/input/event3
I: Bus=0003 Vendor=1532 Product=0118 Version=0111
N: Name="Razer Razer DeathStalker"
P: Phys=usb-0000:00:1d.0-1.7/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3
U: Uniq=
H: Handlers=sysrq kbd event3
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
#udevadm info /dev/input/event4
I: Bus=0003 Vendor=1532 Product=0118 Version=0111
N: Name="Razer Razer DeathStalker"
P: Phys=usb-0000:00:1d.0-1.7/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4
B: PROP=0
B: EV=10001f
B: KEY=4837fff072ff32d bf54444600000000 1 30c100b17c007 ffbf7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=40
B: ABS=ffffff0100000000
B: MSC=10
#udevadm info /dev/input/event5
I: Bus=0003 Vendor=1532 Product=0118 Version=0111
N: Name="Razer Razer DeathStalker"
P: Phys=usb-0000:00:1d.0-1.7/input2
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
#udevadm info /dev/input/event6
I: Bus=0003 Vendor=1532 Product=0029 Version=0111
N: Name="Razer Razer DeathAdder"
P: Phys=usb-0000:00:1d.0-1.8/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input6
U: Uniq=
H: Handlers=mouse1 event6
B: PROP=0
B: EV=17
B: KEY=ff0000 0 0 0 0
B: REL=103
B: MSC=10
#udevadm info /dev/input/event7
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="HID 0a5c:4502"
P: Phys=usb-0000:00:1a.0-1.1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7
U: Uniq=
H: Handlers=sysrq kbd event7
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7
#udevadm info /dev/input/event8
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="HID 0a5c:4503"
P: Phys=usb-0000:00:1a.0-1.1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8
U: Uniq=
H: Handlers=mouse2 event8
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=3
B: MSC=10
|
The rest of the events give an error "Unknown device, --name=, --path=, or absolute path in /dev or /sys expected." |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Thu Nov 07, 2013 11:48 am Post subject: |
|
|
| OK so after scouring the forums I found something interesting here (according to that thread it looks like I am not the only one having this problem). Apparently I used a make.conf from an older install (this install is only a few weeks old) and didn't have the openrc use flag. This must be something relatively new cause I never knew I needed this flag so once I added "openrc" to my use flags and emerge -uDN world, portage wanted to install udev-init-scripts and systemD. I am not sure why systemD is being installed, I don't want to switch to it quite yet, at least until I get the other bugs worked out first, but I let portage do its thing. Now when X starts up the keyboard is functioning but the mouse still isn't. I'm not sure how to get the mouse going yet, but it is late I will work on that tomorrow. I'm just glad progress is being made. |
|
| Back to top |
|
|
trismo
n00b
Joined: 26 May 2012
Posts: 49
|
| Posted: Thu Nov 07, 2013 12:05 pm Post subject: |
|
|
oh i didn't see this CONFIG_DRM=y
Kernel command line: BOOT_IMAGE=/kernel-3.10.7-gentoo-r1 root=/dev/sdd1 ro
try to add nomodeset |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Thu Nov 07, 2013 6:30 pm Post subject: |
|
|
Well, udev-init-scripts were likely the problem, as none of the input devices were tagged.
As for the new problem, once again, new log, tags on event* nodes, etc...
Chances are what's pulling systemd is >=gnome-3.8 and you're in a lot of fun that's not.
systemd will be quite useless installed, if it's not used. |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Fri Nov 08, 2013 12:00 am Post subject: |
|
|
| I use kde and have the -gnome use flag set so it should not have gnome 3.8 being pulled in. |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Fri Nov 08, 2013 11:57 am Post subject: |
|
|
sigh: in my 10+ years of using gentoo I have never had this much trouble with it and it's probably all due to this stupid force change to systemD. Anyways here is the news xorg log.
What really stands out is the phrase "No input driver specified, ignoring this device." Keeps coming up. Not sure why that is when everything seems to work outside of X.
Xorg.0.log
| Code: | [ 159.060]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 159.060] X Protocol Version 11, Revision 0
[ 159.060] Build Operating System: Linux 3.10.7-gentoo-r1 x86_64 Gentoo
[ 159.060] Current Operating System: Linux ramb00000 3.10.7-gentoo-r1 #15 SMP Tue Oct 29 19:52:32 PDT 2013 x86_64
[ 159.060] Kernel command line: BOOT_IMAGE=/kernel-3.10.7-gentoo-r1 root=/dev/sdd1 ro
[ 159.060] Build Date: 30 October 2013 07:05:22AM
[ 159.060]
[ 159.060] Current version of pixman: 0.30.2
[ 159.060] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 159.060] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 159.060] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 7 10:48:01 2013
[ 159.062] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 159.062] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 159.062] (==) No Layout section. Using the first Screen section.
[ 159.062] (==) No screen section available. Using defaults.
[ 159.062] (**) |-->Screen "Default Screen Section" (0)
[ 159.062] (**) | |-->Monitor "<default monitor>"
[ 159.063] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 159.063] (**) | |-->Device "nvidia"
[ 159.063] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 159.063] (==) Automatically adding devices
[ 159.063] (==) Automatically enabling devices
[ 159.063] (==) Automatically adding GPU devices
[ 159.063] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 159.063] Entry deleted from font path.
[ 159.063] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 159.063] Entry deleted from font path.
[ 159.063] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 159.063] Entry deleted from font path.
[ 159.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 159.063] Entry deleted from font path.
[ 159.063] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 159.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 159.064] Entry deleted from font path.
[ 159.064] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 159.064] (==) FontPath set to:
/usr/share/fonts/misc/
[ 159.064] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 159.064] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 159.064] (II) Loader magic: 0x7fcbc0
[ 159.064] (II) Module ABI versions:
[ 159.064] X.Org ANSI C Emulation: 0.4
[ 159.064] X.Org Video Driver: 14.1
[ 159.064] X.Org XInput driver : 19.1
[ 159.064] X.Org Server Extension : 7.0
[ 159.064] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 159.068] (--) PCI:*(0:1:0:0) 10de:0641:3842:c945 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
[ 159.069] Initializing built-in extension Generic Event Extension
[ 159.069] Initializing built-in extension SHAPE
[ 159.069] Initializing built-in extension MIT-SHM
[ 159.069] Initializing built-in extension XInputExtension
[ 159.069] Initializing built-in extension XTEST
[ 159.069] Initializing built-in extension BIG-REQUESTS
[ 159.069] Initializing built-in extension SYNC
[ 159.069] Initializing built-in extension XKEYBOARD
[ 159.069] Initializing built-in extension XC-MISC
[ 159.069] Initializing built-in extension XINERAMA
[ 159.069] Initializing built-in extension XFIXES
[ 159.069] Initializing built-in extension RENDER
[ 159.069] Initializing built-in extension RANDR
[ 159.069] Initializing built-in extension COMPOSITE
[ 159.069] Initializing built-in extension DAMAGE
[ 159.069] Initializing built-in extension MIT-SCREEN-SAVER
[ 159.069] Initializing built-in extension DOUBLE-BUFFER
[ 159.069] Initializing built-in extension RECORD
[ 159.069] Initializing built-in extension DPMS
[ 159.069] Initializing built-in extension X-Resource
[ 159.069] Initializing built-in extension XVideo
[ 159.069] Initializing built-in extension XVideo-MotionCompensation
[ 159.069] Initializing built-in extension XFree86-VidModeExtension
[ 159.069] Initializing built-in extension XFree86-DGA
[ 159.069] Initializing built-in extension XFree86-DRI
[ 159.069] Initializing built-in extension DRI2
[ 159.069] (II) LoadModule: "glx"
[ 159.070] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 159.099] (II) Module glx: vendor="NVIDIA Corporation"
[ 159.099] compiled for 4.0.2, module version = 1.0.0
[ 159.099] Module class: X.Org Server Extension
[ 159.099] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 159.099] Loading extension GLX
[ 159.099] (II) LoadModule: "nvidia"
[ 159.099] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 159.107] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 159.107] compiled for 4.0.2, module version = 1.0.0
[ 159.107] Module class: X.Org Video Driver
[ 159.108] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 159.108] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 159.108] (++) using VT number 7
[ 159.111] (II) Loading sub module "fb"
[ 159.111] (II) LoadModule: "fb"
[ 159.111] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 159.112] (II) Module fb: vendor="X.Org Foundation"
[ 159.112] compiled for 1.14.3, module version = 1.0.0
[ 159.112] ABI class: X.Org ANSI C Emulation, version 0.4
[ 159.112] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 159.112] (II) Loading sub module "wfb"
[ 159.112] (II) LoadModule: "wfb"
[ 159.112] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 159.114] (II) Module wfb: vendor="X.Org Foundation"
[ 159.114] compiled for 1.14.3, module version = 1.0.0
[ 159.114] ABI class: X.Org ANSI C Emulation, version 0.4
[ 159.114] (II) Loading sub module "shadow"
[ 159.114] (II) LoadModule: "shadow"
[ 159.114] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 159.114] (II) Module shadow: vendor="X.Org Foundation"
[ 159.114] compiled for 1.14.3, module version = 1.1.0
[ 159.114] ABI class: X.Org ANSI C Emulation, version 0.4
[ 159.114] (II) Loading sub module "ramdac"
[ 159.114] (II) LoadModule: "ramdac"
[ 159.114] (II) Module "ramdac" already built-in
[ 159.116] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 159.116] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 159.116] (==) NVIDIA(0): RGB weight 888
[ 159.116] (==) NVIDIA(0): Default visual is TrueColor
[ 159.116] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 159.117] (**) NVIDIA(0): Enabling 2D acceleration
[ 159.794] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 159.950] (II) NVIDIA(GPU-0): Display (ViewSonic VX2250 SERIES (DFP-0)) does not support
[ 159.950] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 159.950] (II) NVIDIA(0): NVIDIA GPU GeForce 9400 GT (G96) at PCI:1:0:0 (GPU-0)
[ 159.950] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 159.950] (--) NVIDIA(0): VideoBIOS: 62.94.29.00.40
[ 159.950] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 159.953] (--) NVIDIA(0): Valid display device(s) on GeForce 9400 GT at PCI:1:0:0
[ 159.953] (--) NVIDIA(0): CRT-0
[ 159.953] (--) NVIDIA(0): CRT-1
[ 159.953] (--) NVIDIA(0): TV-0
[ 159.953] (--) NVIDIA(0): ViewSonic VX2250 SERIES (DFP-0) (boot, connected)
[ 159.953] (--) NVIDIA(0): DFP-1
[ 159.953] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 159.953] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 159.953] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 159.953] (--) NVIDIA(0): ViewSonic VX2250 SERIES (DFP-0): 330.0 MHz maximum pixel clock
[ 159.953] (--) NVIDIA(0): ViewSonic VX2250 SERIES (DFP-0): Internal Dual Link TMDS
[ 159.953] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 159.953] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 159.953] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 159.953] (**) NVIDIA(0): device ViewSonic VX2250 SERIES (DFP-0) (Using EDID
[ 159.953] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 159.956] (==) NVIDIA(0):
[ 159.956] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 159.956] (==) NVIDIA(0): will be used as the requested mode.
[ 159.956] (==) NVIDIA(0):
[ 159.956] (II) NVIDIA(0): Validated MetaModes:
[ 159.956] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{}"
[ 159.956] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 159.989] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 159.989] (--) NVIDIA(0): option
[ 159.989] (--) Depth 24 pixmap format is 32 bpp
[ 159.989] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 159.993] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 159.994] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 159.994] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 159.994] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 159.994] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 159.994] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 159.994] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 159.994] (II) NVIDIA(0): Config Options in the README.
[ 159.996] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[ 160.032] Loading extension NV-GLX
[ 160.054] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 160.054] (==) NVIDIA(0): Backing store disabled
[ 160.054] (==) NVIDIA(0): Silken mouse enabled
[ 160.054] (==) NVIDIA(0): DPMS enabled
[ 160.054] Loading extension NV-CONTROL
[ 160.054] Loading extension XINERAMA
[ 160.054] (II) Loading sub module "dri2"
[ 160.054] (II) LoadModule: "dri2"
[ 160.054] (II) Module "dri2" already built-in
[ 160.054] (II) NVIDIA(0): [DRI2] Setup complete
[ 160.054] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 160.054] (--) RandR disabled
[ 160.060] (II) Initializing extension GLX
[ 160.105] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 160.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 160.105] (II) LoadModule: "evdev"
[ 160.105] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 160.106] (II) Module evdev: vendor="X.Org Foundation"
[ 160.106] compiled for 1.14.3, module version = 2.8.1
[ 160.106] Module class: X.Org XInput Driver
[ 160.106] ABI class: X.Org XInput driver, version 19.1
[ 160.106] (II) Using input driver 'evdev' for 'Power Button'
[ 160.106] (**) Power Button: always reports core events
[ 160.106] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 160.106] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 160.106] (--) evdev: Power Button: Found keys
[ 160.106] (II) evdev: Power Button: Configuring as keyboard
[ 160.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 160.106] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 160.106] (**) Option "xkb_rules" "evdev"
[ 160.106] (**) Option "xkb_model" "pc104"
[ 160.106] (**) Option "xkb_layout" "us"
[ 160.131] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 160.131] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 160.131] (II) Using input driver 'evdev' for 'Power Button'
[ 160.131] (**) Power Button: always reports core events
[ 160.131] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 160.131] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 160.131] (--) evdev: Power Button: Found keys
[ 160.131] (II) evdev: Power Button: Configuring as keyboard
[ 160.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 160.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 160.131] (**) Option "xkb_rules" "evdev"
[ 160.131] (**) Option "xkb_model" "pc104"
[ 160.131] (**) Option "xkb_layout" "us"
[ 160.132] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 160.132] (II) config/udev: Adding input device HID 0a5c:4502 (/dev/input/event7)
[ 160.132] (**) HID 0a5c:4502: Applying InputClass "evdev keyboard catchall"
[ 160.132] (II) Using input driver 'evdev' for 'HID 0a5c:4502'
[ 160.132] (**) HID 0a5c:4502: always reports core events
[ 160.132] (**) evdev: HID 0a5c:4502: Device: "/dev/input/event7"
[ 160.132] (--) evdev: HID 0a5c:4502: Vendor 0xa5c Product 0x4502
[ 160.132] (--) evdev: HID 0a5c:4502: Found keys
[ 160.132] (II) evdev: HID 0a5c:4502: Configuring as keyboard
[ 160.132] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7/event7"
[ 160.132] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD, id 8)
[ 160.132] (**) Option "xkb_rules" "evdev"
[ 160.132] (**) Option "xkb_model" "pc104"
[ 160.132] (**) Option "xkb_layout" "us"
[ 160.133] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/event8)
[ 160.133] (**) HID 0a5c:4503: Applying InputClass "evdev pointer catchall"
[ 160.133] (II) Using input driver 'evdev' for 'HID 0a5c:4503'
[ 160.133] (**) HID 0a5c:4503: always reports core events
[ 160.133] (**) evdev: HID 0a5c:4503: Device: "/dev/input/event8"
[ 160.133] (--) evdev: HID 0a5c:4503: Vendor 0xa5c Product 0x4503
[ 160.133] (--) evdev: HID 0a5c:4503: Found 3 mouse buttons
[ 160.133] (--) evdev: HID 0a5c:4503: Found relative axes
[ 160.133] (--) evdev: HID 0a5c:4503: Found x and y relative axes
[ 160.133] (II) evdev: HID 0a5c:4503: Configuring as mouse
[ 160.133] (**) evdev: HID 0a5c:4503: YAxisMapping: buttons 4 and 5
[ 160.133] (**) evdev: HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 160.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8/event8"
[ 160.133] (II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE, id 9)
[ 160.133] (II) evdev: HID 0a5c:4503: initialized for relative axes.
[ 160.133] (**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
[ 160.133] (**) HID 0a5c:4503: (accel) acceleration profile 0
[ 160.133] (**) HID 0a5c:4503: (accel) acceleration factor: 2.000
[ 160.133] (**) HID 0a5c:4503: (accel) acceleration threshold: 4
[ 160.133] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/mouse2)
[ 160.133] (II) No input driver specified, ignoring this device.
[ 160.133] (II) This device may have been added with another device file.
[ 160.133] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event10)
[ 160.133] (II) No input driver specified, ignoring this device.
[ 160.133] (II) This device may have been added with another device file.
[ 160.133] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event11)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event12)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event13)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event14)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event15)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event16)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.134] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event9)
[ 160.134] (II) No input driver specified, ignoring this device.
[ 160.134] (II) This device may have been added with another device file.
[ 160.135] (II) config/udev: Adding input device Razer Razer DeathStalker (/dev/input/event3)
[ 160.135] (**) Razer Razer DeathStalker: Applying InputClass "evdev keyboard catchall"
[ 160.135] (II) Using input driver 'evdev' for 'Razer Razer DeathStalker'
[ 160.135] (**) Razer Razer DeathStalker: always reports core events
[ 160.135] (**) evdev: Razer Razer DeathStalker: Device: "/dev/input/event3"
[ 160.135] (--) evdev: Razer Razer DeathStalker: Vendor 0x1532 Product 0x118
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found keys
[ 160.135] (II) evdev: Razer Razer DeathStalker: Configuring as keyboard
[ 160.135] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3/event3"
[ 160.135] (II) XINPUT: Adding extended input device "Razer Razer DeathStalker" (type: KEYBOARD, id 10)
[ 160.135] (**) Option "xkb_rules" "evdev"
[ 160.135] (**) Option "xkb_model" "pc104"
[ 160.135] (**) Option "xkb_layout" "us"
[ 160.135] (II) config/udev: Adding input device Razer Razer DeathStalker (/dev/input/event4)
[ 160.135] (**) Razer Razer DeathStalker: Applying InputClass "evdev keyboard catchall"
[ 160.135] (II) Using input driver 'evdev' for 'Razer Razer DeathStalker'
[ 160.135] (**) Razer Razer DeathStalker: always reports core events
[ 160.135] (**) evdev: Razer Razer DeathStalker: Device: "/dev/input/event4"
[ 160.135] (II) evdev: Razer Razer DeathStalker: Using mtdev for this device
[ 160.135] (--) evdev: Razer Razer DeathStalker: Vendor 0x1532 Product 0x118
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found 1 mouse buttons
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found scroll wheel(s)
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found relative axes
[ 160.135] (II) evdev: Razer Razer DeathStalker: Forcing relative x/y axes to exist.
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found absolute axes
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found absolute multitouch axes
[ 160.135] (--) evdev: Razer Razer DeathStalker: Found keys
[ 160.135] (II) evdev: Razer Razer DeathStalker: Configuring as mouse
[ 160.135] (II) evdev: Razer Razer DeathStalker: Configuring as keyboard
[ 160.135] (II) evdev: Razer Razer DeathStalker: Adding scrollwheel support
[ 160.135] (**) evdev: Razer Razer DeathStalker: YAxisMapping: buttons 4 and 5
[ 160.135] (**) evdev: Razer Razer DeathStalker: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 160.135] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input4/event4"
[ 160.135] (II) XINPUT: Adding extended input device "Razer Razer DeathStalker" (type: KEYBOARD, id 11)
[ 160.135] (**) Option "xkb_rules" "evdev"
[ 160.135] (**) Option "xkb_model" "pc104"
[ 160.135] (**) Option "xkb_layout" "us"
[ 160.135] (II) evdev: Razer Razer DeathStalker: initialized for relative axes.
[ 160.135] (WW) evdev: Razer Razer DeathStalker: ignoring absolute axes.
[ 160.135] (**) Razer Razer DeathStalker: (accel) keeping acceleration scheme 1
[ 160.135] (**) Razer Razer DeathStalker: (accel) acceleration profile 0
[ 160.135] (**) Razer Razer DeathStalker: (accel) acceleration factor: 2.000
[ 160.135] (**) Razer Razer DeathStalker: (accel) acceleration threshold: 4
[ 160.136] (II) config/udev: Adding input device Razer Razer DeathStalker (/dev/input/event5)
[ 160.136] (**) Razer Razer DeathStalker: Applying InputClass "evdev pointer catchall"
[ 160.136] (II) Using input driver 'evdev' for 'Razer Razer DeathStalker'
[ 160.136] (**) Razer Razer DeathStalker: always reports core events
[ 160.136] (**) evdev: Razer Razer DeathStalker: Device: "/dev/input/event5"
[ 160.151] (EE) evdev: Razer Razer DeathStalker: Unable to open evdev device "/dev/input/event5".
[ 160.151] (EE) PreInit returned 2 for "Razer Razer DeathStalker"
[ 160.151] (II) UnloadModule: "evdev"
[ 160.151] (II) config/udev: Adding input device Razer Razer DeathStalker (/dev/input/mouse0)
[ 160.151] (II) No input driver specified, ignoring this device.
[ 160.151] (II) This device may have been added with another device file.
[ 160.151] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event6)
[ 160.151] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 160.151] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 160.151] (**) Razer Razer DeathAdder: always reports core events
[ 160.151] (**) evdev: Razer Razer DeathAdder: Device: "/dev/input/event6"
[ 160.168] (EE) evdev: Razer Razer DeathAdder: Unable to open evdev device "/dev/input/event6".
[ 160.168] (EE) PreInit returned 2 for "Razer Razer DeathAdder"
[ 160.168] (II) UnloadModule: "evdev"
[ 160.168] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse1)
[ 160.168] (II) No input driver specified, ignoring this device.
[ 160.168] (II) This device may have been added with another device file.
[ 160.168] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 160.168] (II) No input driver specified, ignoring this device.
[ 160.168] (II) This device may have been added with another device file.
|
|
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Fri Nov 08, 2013 7:44 pm Post subject: |
|
|
Here we go again
| Code: | #ls /dev/input/
by-id
by-path
event0
event1
event10
event11
event12
event13
event14
event15
event16
event2
event3
event4
event5
event6
event7
event8
event9
mice
mouse0
mouse1
mouse2 |
udevadm info /dev/input/event(s)
| Code: | /udevadm info /dev/input/event0
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0
N: input/event0
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=222540
#udevadm info /dev/input/event1
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=221944
#udevadm info /dev/input/event2
P: /devices/platform/pcspkr/input/input2/event2
N: input/event2
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/pcspkr/input/input2/event2
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=247671
#udevadm info /dev/input/event3
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3/event3
N: input/event3
S: input/by-id/usb-Razer_Razer_DeathStalker-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-event-kbd
E: DEVLINKS=/dev/input/by-id/usb-Razer_Razer_DeathStalker-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.0-event-kbd
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input3/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Razer_DeathStalker
E: ID_MODEL_ENC=Razer\x20DeathStalker
E: ID_MODEL_ID=0118
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.7:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_7_1_0
E: ID_REVISION=0200
E: ID_SERIAL=Razer_Razer_DeathStalker
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030001:030002:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Razer
E: ID_VENDOR_ENC=Razer
E: ID_VENDOR_ID=1532
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=242936
#udevadm info /dev/input/event4
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input4/event4
N: input/event4
S: input/by-id/usb-Razer_Razer_DeathStalker-if01-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.1-event-kbd
E: DEVLINKS=/dev/input/by-id/usb-Razer_Razer_DeathStalker-if01-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.1-event-kbd
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input4/event4
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Razer_DeathStalker
E: ID_MODEL_ENC=Razer\x20DeathStalker
E: ID_MODEL_ID=0118
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.7:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_7_1_1
E: ID_REVISION=0200
E: ID_SERIAL=Razer_Razer_DeathStalker
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030001:030002:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Razer
E: ID_VENDOR_ENC=Razer
E: ID_VENDOR_ID=1532
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=243032
#udevadm info /dev/input/event5
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/input/input5/event5
N: input/event5
S: input/by-id/usb-Razer_Razer_DeathStalker-if02-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.2-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Razer_Razer_DeathStalker-if02-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.7:1.2-event-mouse
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.2/input/input5/event5
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Razer_DeathStalker
E: ID_MODEL_ENC=Razer\x20DeathStalker
E: ID_MODEL_ID=0118
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.7:1.2
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_7_1_2
E: ID_REVISION=0200
E: ID_SERIAL=Razer_Razer_DeathStalker
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030001:030002:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Razer
E: ID_VENDOR_ENC=Razer
E: ID_VENDOR_ID=1532
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=243095
#udevadm info /dev/input/event6
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input6/event6
N: input/event6
S: input/by-id/usb-Razer_Razer_DeathAdder-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.8:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Razer_Razer_DeathAdder-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.8:1.0-event-mouse
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input6/event6
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Razer_DeathAdder
E: ID_MODEL_ENC=Razer\x20DeathAdder
E: ID_MODEL_ID=0029
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.8:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_8_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Razer_Razer_DeathAdder
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Razer
E: ID_VENDOR_ENC=Razer
E: ID_VENDOR_ID=1532
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=243178
#udevadm info /dev/input/event7
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7/event7
N: input/event7
S: input/by-id/usb-0a5c_4502-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1.1:1.0-event-kbd
E: DEVLINKS=/dev/input/by-id/usb-0a5c_4502-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1.1:1.0-event-kbd
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input7/event7
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=4502
E: ID_MODEL_ENC=4502
E: ID_MODEL_ID=4502
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=0a5c_4502
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=0a5c
E: ID_VENDOR_ENC=0a5c
E: ID_VENDOR_ID=0a5c
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=223313
#udevadm info /dev/input/event8
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8/event8
N: input/event8
S: input/by-id/usb-0a5c_4503-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1.2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-0a5c_4503-event-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1.2:1.0-event-mouse
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input8/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=0a5c_4503
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=0a5c
E: ID_VENDOR_ENC=0a5c
E: ID_VENDOR_ID=0a5c
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=223419
#udevadm info /dev/input/event9
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=283994
#udevadm info /dev/input/event10
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=284072
#udevadm info /dev/input/event11
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=284130
#udevadm info /dev/input/event12
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input12/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=284473
#udevadm info /dev/input/event13
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input13/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=285036
#udevadm info /dev/input/event14
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input14/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input14/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=287189
#udevadm info /dev/input/event15
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input15/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input15/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=287277
#udevadm info /dev/input/event16
P: /devices/pci0000:00/0000:00:1b.0/sound/card2/input16/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card2/input16/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=287613 |
|
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Fri Nov 08, 2013 7:49 pm Post subject: |
|
|
| dmesg |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Sat Nov 09, 2013 1:15 am Post subject: |
|
|
Not sure if systemD has something to do with this but this is what seems to be pulling in systemD
| Code: | #qdepends -a systemd
* DEPEND
sys-apps/gentoo-systemd-integration-1: virtual/pkgconfig
sys-apps/systemd-204-r1: >=sys-apps/dbus-1.6.8-r1 >=sys-apps/util-linux-2.20 sys-libs/libcap sys-apps/acl >=dev-libs/glib-2 >=dev-libs/gobject-introspection-1.31.1 >=sys-apps/kmod-12 virtual/pam sys-apps/tcp-wrappers app-arch/xz-utils app-text/docbook-xml-dtd:4.2 app-text/docbook-xsl-stylesheets dev-libs/libxslt dev-util/gperf >=dev-util/intltool-0.50 >=sys-devel/gcc-4.6 >=sys-kernel/linux-headers-2.6.39 virtual/pkgconfig virtual/pkgconfig virtual/pkgconfig
* RDEPEND
sys-apps/gentoo-systemd-integration-1: >=sys-apps/systemd-206-r4 <sys-apps/systemd-205 >=sys-apps/systemd-204-r1
sys-apps/systemd-204-r1: >=sys-apps/dbus-1.6.8-r1 >=sys-apps/util-linux-2.20 sys-libs/libcap sys-apps/acl >=dev-libs/glib-2 >=dev-libs/gobject-introspection-1.31.1 >=sys-apps/kmod-12 virtual/pam sys-apps/tcp-wrappers >=sys-apps/baselayout-2.2 >=sys-fs/udev-init-scripts-25 sys-auth/polkit >=sys-apps/util-linux-2.22 <sys-apps/sysvinit-2.88-r4 !sys-auth/nss-myhostname !<sys-libs/glibc-2.10 !sys-fs/udev
* PDEPEND
sys-apps/systemd-204-r1: >=sys-apps/hwids-20130326.1[udev] ~sys-apps/gentoo-systemd-integration-1 |
|
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Sat Nov 09, 2013 11:05 am Post subject: |
|
|
| Not sure if this helps but I can't get GPM to work either. |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Mon Nov 11, 2013 12:55 am Post subject: |
|
|
Not sure why but after not hearing any feedback from the forums on this issue I decided to try at it again. So I re-ran nvidia-xsettings to generate a new xorg.conf then tried to start X and my keyboard and mouse now works but I have to unplug and replugin in the devices everytime I run xserv
Edit: I want to mention that I tried unplugging the keyboard and mouse before and it never worked before. I think it's working now because of the addition of the openrc use flag.
Last edited by <3 on Tue Nov 12, 2013 12:03 am; edited 2 times in total |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Tue Nov 12, 2013 12:03 am Post subject: |
|
|
| Anyone know what I have to do to keep from having to replug in the keyboard and mouse when I start X? |
|
| Back to top |
|
|
trismo
n00b
Joined: 26 May 2012
Posts: 49
|
| Posted: Tue Nov 12, 2013 12:52 am Post subject: |
|
|
you have hdd errors or driver im not sure
read error EDIT /dev/sdd frozen for 30 Sek
| Quote: | [ 33.929859] ata8.00: exception Emask 0x0 SAct 0x20000003 SErr 0x0 action 0x6 frozen
[ 33.929998] ata8.00: failed command: READ FPDMA QUEUED
[ 33.930080] ata8.00: cmd 60/08:00:00:38:80/00:00:07:00:00/40 tag 0 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 33.930298] ata8.00: status: { DRDY }
[ 33.930376] ata8.00: failed command: READ FPDMA QUEUED
[ 33.930458] ata8.00: cmd 60/08:08:c8:37:80/00:00:07:00:00/40 tag 1 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 33.930692] ata8.00: status: { DRDY }
[ 33.930771] ata8.00: failed command: READ FPDMA QUEUED
[ 33.930853] ata8.00: cmd 60/08:e8:f0:37:80/00:00:07:00:00/40 tag 29 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 33.931070] ata8.00: status: { DRDY }
[ 33.931150] ata8: hard resetting link
[ 34.390940] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 370) |
Last edited by trismo on Tue Nov 12, 2013 5:32 pm; edited 1 time in total |
|
| Back to top |
|
|
<3
Veteran
Joined: 21 Oct 2004
Posts: 1081
|
| Posted: Tue Nov 12, 2013 8:17 am Post subject: |
|
|
| LOL if this is another HD failure I will go insane. This is a brand new SSD that I just got after my old Gentoo install on a hard drive just died on me. fsck.ext4 report no errors. so I hope that is now the cause of this. |
|
| Back to top |
|
|
trismo
n00b
Joined: 26 May 2012
Posts: 49
|
| Posted: Tue Nov 12, 2013 4:32 pm Post subject: |
|
|
try change sata port and cable and check dmesg again. Look bios settings smart is on
and AHCI mode on. INTEL SSDSC2CT08 335u have the problem
use http://www.sysresccd.org is gentoo based check with it your hardware
a read error can cause your problems.
Sorry my english is bad, hope you understand it
add this option to your kernel config
| Code: | CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=0
|
blacklist 2 module lpc_ich and gpio_ich
fix this: (i801_smbus & iTCO_wdt) a in use
| Quote: | [ 34.608367] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 34.608484] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130328/utaddress-251)
[ 34.608489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.608492] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20130328/utaddress-251)
[ 34.608494] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20130328/utaddress-251)
[ 34.608497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 34.608498] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20130328/utaddress-251)
[ 34.608501] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20130328/utaddress-251)
[ 34.608503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver] |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
