View previous topic :: View next topic |
Author |
Message |
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Sat Sep 14, 2013 6:17 pm Post subject: /etc/X11/xorg.conf.d/ screen.conf? kde Bildschirmauflösung |
|
|
Hallo, ich nutze einen Intel Chip für die Grafik. kde-4.1* startet immer wieder einmal mit einer Bildschirmauflösung, die ich so nicht unter den systemsettings abgespeichert habe. Deshalb würde ich gern die Bildschirmauflösung an einem anderen Ort angeben.
Unter /etc/X11/xorg.conf.d/ habe ich z.Z.
10-evdev.conf Code: | Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "xkb_layout" "de"
EndSection |
20-intel.conf Code: | Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "Accelmethod" "sna"
EndSection |
30-monitor.conf Code: | Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ FP202W"
HorizSync 30.0 - 84.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection |
Wo bringe ich das hier unter? Code: | Section "Screen"
Identifier "Screen0"
Device "Intel Graphics"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection |
Last edited by flammenflitzer on Sat Sep 21, 2013 4:38 am; edited 1 time in total |
|
Back to top |
|
|
Christian99 Veteran
Joined: 28 May 2009 Posts: 1668
|
Posted: Sat Sep 14, 2013 8:05 pm Post subject: |
|
|
egal. Alle *.conf dateien in dem verzeichnis werden in alphabetischer reihenfolge ausgeführt.
Also eine beliebige Datei mit Endung conf erstellen und da rein. |
|
Back to top |
|
|
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Sat Sep 21, 2013 4:38 am Post subject: |
|
|
Bringt leider überhaupt nichts. Mitunter startet kde mit einer grottigen Bildschirmauflösung. Statt 1680x1050 mit 800x600. |
|
Back to top |
|
|
Christian99 Veteran
Joined: 28 May 2009 Posts: 1668
|
Posted: Sat Sep 21, 2013 8:36 am Post subject: |
|
|
Sorry, wie man die AUflösung direkt in den xorg.conf Dateien einstellt weiß ich leider nicht.
mir ist nur was aufgefallen:
Code: | Option "metamodes" "CRT: 1680x1050 +0+0" |
CRT steht für Cathode Ray Tube, also Röhrenbildschirm. Ist dein Bildschirm denn eine Röhre? Bei der Auflösung würde ich fast mal Nein vermuten.
Aber ich hab überhaupt keinen Plan, ob das nicht doch so sein muss aus irgendwelchen gründen... |
|
Back to top |
|
|
Fijoldar Apprentice
Joined: 10 Apr 2013 Posts: 248
|
Posted: Sat Sep 21, 2013 9:13 am Post subject: |
|
|
Hallo,
so weit ich mich erinnern kann, muss in der xorg.conf folgendes stehen:
Code: | Section "Screen"
[...]
Monitor "Monitor0"
SubSection "Display"
Modes "1680x1050"
EndSubSection
EndSection
|
und evtl. auch noch das hier
Code: | Section "Monitor"
Identifier "Monitor0"
Option "PreferredMode" "1680x1050"
EndSection |
Wobei es natürlich sein kann, dass KDE diese Einstellungen ignoriert und seine eigene setzt. Zumindest macht es das bei mir mit der DPI. Diese habe ich zwar in der xorg.conf auf 96 festgelegt, allerdings kann ich diese mit den KDE Einstellungen auch überschreiben. Daher kann es gut sein, dass die Änderungen in der xorg.conf ohne Wirkung bleiben, wenn KDE meint, es müsste eine andere Auflösung setzen. |
|
Back to top |
|
|
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Sat Sep 21, 2013 9:37 am Post subject: |
|
|
Die xorg.conf ist m. E. Geschichte. Dafür gibt es doch die Dateien unter /etc/X11/xorg.conf.d/ Code: | 10-evdev.conf 20-intel.conf 30-monitor.conf screen.conf |
Die habe ich jetzt geändert.
Code: | cat 30-monitor.conf
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ FP202W"
HorizSync 30.0 - 84.0
VertRefresh 56.0 - 76.0
Option "DPMS"
Option "PreferredMode" "1680x1050"
EndSection |
Code: | cat screen.conf
Section "Screen"
Identifier "Screen0"
Device "Intel Graphics"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "CRT: 1680x1050 +0+0"
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
|
|
|
Back to top |
|
|
Yamakuzure Advocate
Joined: 21 Jun 2006 Posts: 2280 Location: Adendorf, Germany
|
Posted: Sat Sep 21, 2013 10:28 am Post subject: |
|
|
Die Frage ist, was dein Monitor per EDID meldet. Wenn der die grottige Auflösung meldet, dann wird die auch so verwendet.
Wie auch immer, /etc/X11/xorg.conf ist nicht tot, und wird brav verwendet, wenn es kein /etc/X11/xorg.conf.d Verzeichnis gibt. (Oder vielleicht auch in jedem Fall, das weiß ich nicht.)
Hier meine xorg.conf als Referenz: Code: | Section "ServerLayout"
Identifier "sed-notebook"
Screen 0 "Panel" 0 0
Screen 1 "VGA" RightOf "Panel"
EndSection
Section "ServerFlags"
Option "AIGLX" "True"
Option "DRI2" "True"
Option "DontZap" "False"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/opengl/xorg-x11/extensions/"
EndSection
Section "Device"
Identifier "IntelHD"
Driver "intel"
VendorName "Intel Corporation"
Boardname "Mobile Intel HD Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "SwapbuffersWait" "false"
Option "DRI" "true"
# Option "AccelMethod" "UXA"
Option "AccelMethod" "SNA"
# Option "AccelMethod" "GLAMOR"
EndSection
Section "InputClass"
Identifier "keyboard-all_de"
Driver "evdev"
Option "XkbLayout" "de"
Option "XkbOptions" "compose:lwin"
MatchIsKeyboard "on"
EndSection
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "LeftEdge" "100"
Option "RightEdge" "1750"
Option "TopEdge" "100"
Option "BottomEdge" "1250"
Option "FingerLow" "12"
Option "FingerHigh" "14"
Option "FingerPress" "127"
Option "MaxTapTime" "180"
Option "MaxTapMove" "107"
Option "MaxDoubleTapTime" "180"
Option "SingleTapTimeout" "180"
Option "ClickTime" "100"
Option "FastTaps" "0"
Option "EmulateMidButtonTime" "75"
Option "EmulateTwoFingerMinZ" "139"
Option "EmulateTwoFingerMinW" "7"
Option "VertScrollDelta" "44"
Option "HorizScrollDelta" "44"
Option "VertEdgeScroll" "1"
Option "HorizEdgeScroll" "1"
Option "CornerCoasting" "0"
Option "VertTwoFingerScroll" "0"
Option "HorizTwoFingerScroll" "0"
Option "MinSpeed" "0.75"
Option "MaxSpeed" "1.75"
Option "AccelFactor" "0.0075"
Option "TrackstickSpeed" "40"
Option "EdgeMotionMinZ" "14"
Option "EdgeMotionMaxZ" "79"
Option "EdgeMotionMinSpeed" "1"
Option "EdgeMotionMaxSpeed" "195"
Option "EdgeMotionUseAlways" "0"
Option "TouchpadOff" "0"
Option "LockedDrags" "0"
Option "LockedDragTimeout" "5000"
Option "RTCornerButton" "0"
Option "RBCornerButton" "0"
Option "LTCornerButton" "0"
Option "LBCornerButton" "0"
Option "TapButton1" "1"
Option "TapButton2" "3"
Option "TapButton3" "2"
Option "ClickFinger1" "1"
Option "ClickFinger2" "1"
Option "ClickFinger3" "1"
Option "CircularScrolling" "0"
Option "CircScrollDelta" "0.100007"
Option "CircScrollTrigger" "0"
Option "CircularPad" "0"
Option "PalmDetect" "1"
Option "PalmMinWidth" "10"
Option "PalmMinZ" "99"
Option "CoastingSpeed" "0"
Option "CoastingFriction" "50"
Option "PressureMotionMinZ" "14"
Option "PressureMotionMaxZ" "79"
Option "PressureMotionMinFactor" "1"
Option "PressureMotionMaxFactor" "1"
Option "GrabEventDevice" "1"
Option "TapAndDragGesture" "0"
Option "AreaLeftEdge" "0"
Option "AreaRightEdge" "0"
Option "AreaTopEdge" "0"
Option "AreaBottomEdge" "0"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
identifier "LVDS1"
VendorName "DEC"
ModelName "Panel 1440x900"
Option "Primary" "True"
Option "PreferredMode" "1440x900"
Option "LeftOf" "MonVGA"
Option "Position" "0 0"
EndSection
Section "Monitor"
identifier "VGA1"
VendorName "Benq"
ModelName "G2420HDB"
Option "Primary" "False"
Option "PreferredMode" "1920x1080"
Option "RightOf" "LVDS1"
EndSection
Section "Screen"
Identifier "Panel"
Device "IntelHD"
Monitor "LVDS1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900" "1280x800"
EndSubSection
EndSection
Section "Screen"
Identifier "VGA"
Device "IntelHD"
Monitor "VGA1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1280x1024"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Mode 0666
EndSection | Ein paar Dinge darin sind vielleicht nicht mehr notwendig, aber das Zeug funktioniert mit KDE, e17 und razorqt. _________________ Important German:- "Aha" - German reaction to pretend that you are really interested while giving no f*ck.
- "Tja" - German reaction to the apocalypse, nuclear war, an alien invasion or no bread in the house.
|
|
Back to top |
|
|
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Sat Sep 21, 2013 11:13 am Post subject: |
|
|
Wenn das gegenwärtige weiter nicht funktioniert, probiere ich das aus.
Danke |
|
Back to top |
|
|
Yamakuzure Advocate
Joined: 21 Jun 2006 Posts: 2280 Location: Adendorf, Germany
|
Posted: Mon Sep 23, 2013 11:58 am Post subject: |
|
|
Was mir noch einfiel: Du hast, nach der Korrektur deiner Bildschirmauflösung, in Systemeinstellungen->Anzeige und Monitor unten auch auf "Als Standard speichern" angewendet, ja? _________________ Important German:- "Aha" - German reaction to pretend that you are really interested while giving no f*ck.
- "Tja" - German reaction to the apocalypse, nuclear war, an alien invasion or no bread in the house.
|
|
Back to top |
|
|
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Fri Sep 27, 2013 4:46 pm Post subject: |
|
|
Habe ich. Regelmäßig. Bringt nichts. Ich werde jetzt mal wieder eine xorg.conf anlegen. |
|
Back to top |
|
|
flammenflitzer Advocate
Joined: 25 Nov 2003 Posts: 3468 Location: Berlin
|
Posted: Fri Sep 27, 2013 5:04 pm Post subject: |
|
|
Ich probiere jetzt das aus Code: | Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Option "Xinerama" "0"
EndSection
Section "ServerFlags"
Option "AIGLX" "True"
Option "DRI2" "True"
Option "DontZap" "False" #"Don't Zap" wird eine Option der XServer-Konfiguration genannt,
# die verhindert, dass der XServer mit der Tastenkombination
# Strg + Alt + ⌫ neu gestartet werden kann.
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/opengl/xorg-x11/extensions/"
EndSection
Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "Intel Corporation"
Option "SwapbuffersWait" "false"
Option "DRI" "true"
# Option "AccelMethod" "UXA"
Option "AccelMethod" "SNA"
# Option "AccelMethod" "GLAMOR"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ FP202W"
HorizSync 30.0 - 84.0
VertRefresh 56.0 - 76.0
Option "DPMS"
Option "PreferredMode" "1680x1050"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Mode 0666
EndSection |
|
|
Back to top |
|
|
|