View previous topic :: View next topic |
Author |
Message |
lhw828 n00b
Joined: 05 Sep 2013 Posts: 67
|
Posted: Tue Sep 10, 2013 5:39 am Post subject: Update The Kernel 3.11.0 EE Log |
|
|
Code: |
* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 3.11.0-gentoo for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/kernel-config
* WARNING: Failed to mount /boot!
* kernel: Using config from /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: >> Running mrproper...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
* >> Running oldconfig...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
HOSTCC scripts/basic/fixdep
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* ERROR: Failed to compile the "oldconfig" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
* kernel: >> Cleaning...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86"
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
HOSTCC scripts/basic/fixdep
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[2]: *** [scripts/basic/fixdep] Error 1
make[1]: *** [scripts_basic] Error 2
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'. Stop.
make: *** Waiting for unfinished jobs....
HOSTCC scripts/basic/fixdep
* gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* ERROR: Failed to compile the "prepare" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
|
|
|
Back to top |
|
|
alacheesu Tux's lil' helper
Joined: 01 Jun 2005 Posts: 113
|
Posted: Tue Sep 10, 2013 8:34 am Post subject: |
|
|
I don't use genkernel, but
Code: | * gcc-config: Active gcc profile is invalid! |
doesn't look good. What does gcc-config -l say? Try setting it to a valid gcc profile with something like gcc-config 1. Also please post your make.conf. |
|
Back to top |
|
|
lhw828 n00b
Joined: 05 Sep 2013 Posts: 67
|
Posted: Tue Sep 10, 2013 8:43 am Post subject: |
|
|
alacheesu wrote: | I don't use genkernel, but
Code: | * gcc-config: Active gcc profile is invalid! |
doesn't look good. What does gcc-config -l say? Try setting it to a valid gcc profile with something like gcc-config 1. Also please post your make.conf. |
Code: | gcc-config -l
* gcc-config: Active gcc profile is invalid!
[1] x86_64-pc-linux-gnu-4.7.3
|
Code: | cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
EMERGE_DEFAULT_OPTS="--autounmask=n"
ACCEPT_LICENSE="*"
ACCEPT_KEYWORDS="~amd64"
LINGUAS="zh zh_CN zh_CN.UTF-8"
VIDEO_CARDS="intel"
MAKEOPTS="-j3"
CFLAGS="-march=core2 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="symlink 3dfx opengl pdf png qt3support alsa dri exif flac gif gzip hal mp3 mp4 mpeg ogg -perl -wallpapers -handbook -doc -ppp qt dbus X qt4 -bluetooth -gnome cups kde -ipv6 gtk usb win32codecs x264 zsh-completion"
#GENTOO_MIRRORS="http://mirrors.sohu.com/gentoo/"
#SYNC="rsync://rsync2.cn.gentoo.org/gentoo-portage"
INPUT_DEVICE="evdev synaptics keybord mouse"
source /var/lib/layman/make.conf
PORTDIR_OVERLAY="${PORTDIR} ${PORTDIR_OVERLAY}"
#PYTHON_TARGETS="python2_7 python3_3"
PORTDIR="/usr/portage" source /var/lib/layman/make.conf
|
|
|
Back to top |
|
|
lhw828 n00b
Joined: 05 Sep 2013 Posts: 67
|
Posted: Tue Sep 10, 2013 8:54 am Post subject: |
|
|
ok,i got it!
x86_64-pc-linux-gnu-4.7.3
Code: | gcc-config x86_64-pc-linux-gnu-4.7.3 |
|
|
Back to top |
|
|
alacheesu Tux's lil' helper
Joined: 01 Jun 2005 Posts: 113
|
Posted: Tue Sep 10, 2013 10:09 am Post subject: |
|
|
Good. Glad to see you solved it! |
|
Back to top |
|
|
|