Sirserega n00b
Joined: 05 Jul 2013 Posts: 23
|
Posted: Sun Aug 25, 2013 10:18 am Post subject: Very long starting X |
|
|
Hey i got problem with xorg. When gentoo starting X its need around 5-7 sec to run kdm i dont know whats going on.
I starting kdm as xdm in rc.
xorg.conf
Code: | # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 325.15 (buildmeister@swio-display-x64-rhel04-03) Wed Jul 31 19:04:13 PDT 2013
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "0"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 450"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "DVI-I-0: 1024x768_85 +1920+0, HDMI-0: 1920x1080_60 +0+0; HDMI-0: nvidia-auto-select +0+0; HDMI-0: 1920x1080_60_0 +0+0; HDMI-0: 1920x1080_50 +0+0; HDMI-0: 1920x1080_60i +0+0; HDMI-0: 1920x1080_60i_0 +0+0; HDMI-0: 1920x1080_50i +0+0; HDMI-0: 1680x1050 +0+0; HDMI-0: 1440x900 +0+0; HDMI-0: 1440x900_60 +0+0; HDMI-0: 1280x1024 +0+0; HDMI-0: 1280x1024_60 +0+0; HDMI-0: 1280x960 +0+0; HDMI-0: 1280x800 +0+0; HDMI-0: 1280x720 +0+0; HDMI-0: 1280x720_60_0 +0+0; HDMI-0: 1280x720_50 +0+0; HDMI-0: 1152x864 +0+0; HDMI-0: 1024x768 +0+0; HDMI-0: 1024x768_70 +0+0; HDMI-0: 1024x768_60 +0+0; HDMI-0: 800x600 +0+0; HDMI-0: 800x600_72 +0+0; HDMI-0: 800x600_60 +0+0; HDMI-0: 800x600_56 +0+0; HDMI-0: 720x576 +0+0; HDMI-0: 720x480 +0+0; HDMI-0: 640x480 +0+0; HDMI-0: 640x480_72 +0+0; HDMI-0: 640x480_60 +0+0; HDMI-0: nvidia-auto-select +0+0 {viewportin=1366x768, viewportout=1920x1079+0+0}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
/etc/conf.d/xdm
Code: |
# We always try and start X on a static VT. The various DMs normally default
# to using VT7. If you wish to use the xdm init script, then you should ensure
# that the VT checked is the same VT your DM wants to use. We do this check to
# ensure that you haven't accidentally configured something to run on the VT
# in your /etc/inittab file so that you don't get a dead keyboard.
CHECKVT=7
# What display manager do you use ? [ xdm | gdm | kdm | gpe | entrance ]
# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
DISPLAYMANAGER="kdm" |
and i used
rc-update add xdm default
any idea whats going wrong with it ? |
|