| View previous topic :: View next topic |
| Author |
Message |
Suami777
n00b
Joined: 07 Jul 2013
Posts: 19
|
 Posted: Sat Jul 20, 2013 9:48 am Post subject: Xorg starting very long |
 |
|
Hello, as first i want to apologise for my bad english skill.
I got problem, i made fresh install gentoo yerstday. When my pc running and x are starting x need around 6-10 secound to run kde environment.
i dont know what file you want to see so i put few of them
.xinitrc in my home/user folder
xorg.conf in /etc/X11/
| Code: | # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 319.32 (buildmeister@swio-display-x64-rhel04-14) Wed Jun 19 15:50:23 PDT 2013
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 319.32 (buildmeister@swio-display-x64-rhel04-14) Wed Jun 19 15:50:37 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 450"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "CRT: 1024x768_85 +1920+0, DFP: 1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
xorg.conf in /etc/X11/xorg.conf.d/ folder
| Code: | # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 319.32 (buildmeister@swio-display-x64-rhel04-14) Wed Jun 19 15:50:23 PDT 2013
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 319.32 (buildmeister@swio-display-x64-rhel04-14) Wed Jun 19 15:50:37 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 450"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "CRT: 1024x768_85 +1920+0, DFP: 1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
dont know what more do you want.
Btw i got SSD drive its possible to turn off that long scanning phase in system start ? on arch i was needed 3 sec to full start computer on gentoo over 30 with xorg problem |
|
| Back to top |
|
 |
Logicien
Veteran
Joined: 16 Sep 2005
Posts: 1555
Location: Montréal
|
| Posted: Sat Jul 20, 2013 1:08 pm Post subject: |
|
|
Everything equal, I dont think for the moment you can have a faster boot and shutdown speed than the one that provide Systemd from ArchLinux or an other distribution who use it. System V and Openrc are slower boot systems but as good than Systemd. Only the BSD boot and shutdown scripts can come close to Systemd speed.
I see you have identical Xorg configuration files, /etc/X11/xorg.conf and /etc/X11/xorg.conf.d/xorg.conf. You need only one of them. I would use /etc/X11/xorg.conf as a complete configuration file or split /etc/X11/xorg.conf.d/xorg.conf in one file per section in that directory. The fact that Xorg read two configuration files probably do not slow it, but it is better to have only one configuration file per section.
Do you have configure Kde in Gentoo the same way than it is in ArchLinux? You can speed Kde if it is configure to not start any unneeded service.
The most important thing for me is that everytings work well at a good rhythm.
_________________
Paul |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Installing Gentoo
